16 Analog-to-Digital Converters 2,400+

Reset All
Part RoHS Manufacturer Converter Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material No. of Analog In Channels Surface Mount Maximum Supply Voltage Maximum Analog Input Voltage Sample Rate No. of Functions Technology Screening Level Nominal Bandwidth No. of Bits Maximum Supply Current Maximum Linearity Error (EL) Nominal Supply Voltage Output Bit Code Power Supplies (V) Nominal Negative Supply Voltage Package Style (Meter) Package Equivalence Code Sub-Category Minimum Supply Voltage Terminal Pitch Maximum Operating Temperature Minimum Analog Input Voltage Output Format Minimum Operating Temperature Terminal Finish Sample and Hold/Track and Hold Terminal Position Maximum Conversion Time JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Additional Features JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length Input Bit Code

ADS1225IRGVR

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

No Lead

16

HVQCCN

Square

Plastic/Epoxy

1

Yes

5.5 V

125 Hz

1

24

0.002 %

5 V

2's Complement Binary

3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.16SQ,25

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

105 °C (221 °F)

-5 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Quad

83.3 ms

S-PQCC-N16

2

0.039 in (1 mm)

0.157 in (4 mm)

No

e4

30 s

260 °C (500 °F)

0.157 in (4 mm)

ADS1225IRGVT

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

No Lead

16

HVQCCN

Square

Plastic/Epoxy

1

Yes

5.5 V

125 Hz

1

24

0.002 %

5 V

2's Complement Binary

3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.16SQ,25

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

105 °C (221 °F)

-5 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Quad

83.3 ms

S-PQCC-N16

2

0.039 in (1 mm)

0.157 in (4 mm)

No

e4

30 s

260 °C (500 °F)

0.157 in (4 mm)

ADS7066IYBHT

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Ball

16

VFBGA

Square

Plastic/Epoxy

8

Yes

5.5 V

250 kHz

1

16

1.56 mA

0.006103515625 %

3.3 V

Binary

Grid Array, Very Thin Profile, Fine Pitch

BGA16,4X4,16

1.65 V

0.016 in (0.4 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Silver Copper

Sample

Bottom

3.2 µs

S-PBGA-B16

1

0.016 in (0.4 mm)

0.064 in (1.6205 mm)

e1

30 s

260 °C (500 °F)

0.064 in (1.6205 mm)

ADS7254IPWR

Texas Instruments

Analog To Digital Converter, Proprietary Method

Automotive

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

5.5 V

1 MHz

1

12

10 mA

0.0244 %

5 V

Binary

Small Outline, Thin Profile, Shrink Pitch

1.65 V

0.026 in (0.65 mm)

125 °C (257 °F)

-2.4 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

450 ns

R-PDSO-G16

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS7851IRTER

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

16

HVQCCN

Square

Plastic/Epoxy

2

Yes

5.25 V

1.5 MHz

1

14

12 mA

0.0122 %

5 V

2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

1.65 V

0.02 in (0.5 mm)

125 °C (257 °F)

4.99 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

666.7 µs

S-PQCC-N16

2

0.031 in (0.8 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADS7854IRTER

Texas Instruments

Analog To Digital Converter, Proprietary Method

Automotive

No Lead

16

HVQCCN

Square

Plastic/Epoxy

2

Yes

5.5 V

1 MHz

1

14

10 mA

0.0122 %

5 V

Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

1.65 V

0.02 in (0.5 mm)

125 °C (257 °F)

-2.4 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

450 ns

S-PQCC-N16

2

0.031 in (0.8 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADS8341E/2K5

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

4

Yes

5.25 V

100 kHz

1

CMOS

16

2 mA

0.0122 %

5 V

Binary

2.7/5 V

Small Outline, Shrink Pitch

SSOP16,.25

Analog to Digital Converters

2.7 V

0.025 in (0.635 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

6.67 µs

R-PDSO-G16

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

ADS8341EG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

4

Yes

5.25 V

100 kHz

1

CMOS

16

0.0122 %

5 V

Binary

2.7/5 V

Small Outline, Shrink Pitch

SSOP16,.25

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

6.67 µs

R-PDSO-G16

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

ADS8354IPW

Texas Instruments

Analog To Digital Converter, Proprietary Method

Automotive

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

5.5 V

700 kHz

1

16

10 mA

0.0038 %

5 V

Binary

Small Outline, Thin Profile, Shrink Pitch

1.65 V

0.026 in (0.65 mm)

125 °C (257 °F)

-2.4 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

640 ns

R-PDSO-G16

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

LTC1863IGN#WTRPBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

8

Yes

2.048 V

200 kHz

1

AEC-Q100

12

1.8 mA

0.0244 %

5 V

Binary, 2's Complement Binary

Small Outline, Shrink Pitch

SSOP16,.25

0.025 in (0.635 mm)

85 °C (185 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Sample

Dual

3.5 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.899 mm)

e3

260 °C (500 °F)

0.193 in (4.89 mm)

LTC2311IMSE-12#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

HTSSOP

Rectangular

Plastic/Epoxy

1

Yes

2.054 V

5 MHz

1

CMOS

12

0.0244 %

3.3 V

Binary

Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch

0.02 in (0.5 mm)

85 °C (185 °F)

-2.042 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

R-PDSO-G16

0.043 in (1.1 mm)

0.118 in (3 mm)

e3

0.159 in (4.039 mm)

LTC2376HMS-16#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.15 V

250 kHz

1

CMOS

16

0.0008 %

2.5 V

2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

0.02 in (0.5 mm)

125 °C (257 °F)

2.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

3 µs

R-PDSO-G16

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.159 in (4.039 mm)

LTC2376HMS-18#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.1 V

250 kHz

1

CMOS

18

0.0007 %

2.5 V

2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

0.02 in (0.5 mm)

125 °C (257 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

3 µs

R-PDSO-G16

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.159 in (4.039 mm)

LTC2378CMS-16#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.15 V

1 MHz

1

CMOS

16

0.0008 %

2.5 V

2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

0.02 in (0.5 mm)

70 °C (158 °F)

-50 mV

Serial

0 °C (32 °F)

Matte Tin

Dual

525 ns

R-PDSO-G16

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.159 in (4.039 mm)

LTC2415-1IGN#PBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

1

Yes

2.75 V

1

24

3.3 V

Binary

Small Outline, Shrink Pitch

0.025 in (0.635 mm)

85 °C (185 °F)

-2.75 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

74.3 ms

R-PDSO-G16

1

0.068 in (1.727 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.8895 mm)

LTC2436-1CGN#TRPBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Commercial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

2

Yes

2.5 V

1

16

0.0046 %

5 V

Binary

Small Outline, Shrink Pitch

0.025 in (0.635 mm)

70 °C (158 °F)

-2.5 V

Serial

0 °C (32 °F)

Matte Tin

Dual

149.6 ms

R-PDSO-G16

1

0.068 in (1.727 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.8895 mm)

LTC2436-1IGN#PBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

2

Yes

2.5 V

1

16

0.0046 %

5 V

Binary

Small Outline, Shrink Pitch

0.025 in (0.635 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

149.6 ms

R-PDSO-G16

1

0.068 in (1.727 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.8895 mm)

LTC2436-1IGN#TRPBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

2

Yes

2.5 V

1

16

0.0046 %

5 V

Binary

Small Outline, Shrink Pitch

0.025 in (0.635 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

149.6 ms

R-PDSO-G16

1

0.068 in (1.727 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.8895 mm)

MAX11605EEE+

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

12

Yes

1.024 V

77 kHz

1

BICMOS

8

0.3906 %

3 V

Binary, 2's Complement Binary

3/3.3 V

Small Outline, Shrink Pitch

SSOP16,.25

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

-1.024 V

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Track

Dual

6.1 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.89 mm)

MAX1238EEE

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

12

Yes

2.048 V

94.4 kHz

1

BICMOS

12

0.0244 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP16,.25

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

7.5 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

20 s

240 °C (464 °F)

0.193 in (4.9 mm)

MAX1238EEE+

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

12

Yes

2.048 V

51 kHz

1

BICMOS

12

0.0244 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP16,.25

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Track

Dual

7.5 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.89 mm)

MAX1239EEE-T

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

12

Yes

1.024 V

94.4 kHz

1

BICMOS

12

0.0244 %

3 V

Binary, 2's Complement Binary

3/3.3 V

Small Outline, Shrink Pitch

SSOP16,.25

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

-1.024 V

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

7.5 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

20 s

240 °C (464 °F)

0.193 in (4.9 mm)

MAX1239EEE+T

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

12

Yes

1.024 V

94.4 kHz

1

BICMOS

12

0.0244 %

3 V

Binary, 2's Complement Binary

3/3.3 V

Small Outline, Shrink Pitch

SSOP16,.25

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

-1.024 V

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Track

Dual

7.5 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

PADS8353QPWRQ1

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

5 V

600 kHz

1

AEC-Q100

16

0.0061 %

5 V

Binary, 2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

0.026 in (0.65 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Sample

Dual

R-PDSO-G16

0.047 in (1.2 mm)

0.173 in (4.4 mm)

0.197 in (5 mm)

TLV320ADC3001IYZHR

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Ball

16

VFBGA

Square

Plastic/Epoxy

2

Yes

3.6 V

96 kHz

1

16

3.3 V

2's Complement Binary

1.8,3.3 V

Grid Array, Very Thin Profile, Fine Pitch

BGA16,4X4,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

Serial

-40 °C (-40 °F)

Tin Silver Copper

Bottom

S-PBGA-B16

1

0.025 in (0.625 mm)

No

e1

30 s

260 °C (500 °F)

CS5509-ASZ

Cirrus Logic

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

1

Yes

2.5 V

200 Hz

1

CMOS

16

0.0125 %

5 V

Binary, Offset Binary

3.3/5,5 V

Small Outline

SOP16,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G16

3

0.105 in (2.67 mm)

0.295 in (7.5 mm)

No

e3

260 °C (500 °F)

0.4 in (10.16 mm)

LTC2415CGN#PBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Commercial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

1

Yes

2.75 V

1

24

3.3 V

Binary

Small Outline, Shrink Pitch

0.025 in (0.635 mm)

70 °C (158 °F)

-2.75 V

Serial

0 °C (32 °F)

Matte Tin

Dual

81.72 ms

R-PDSO-G16

1

0.068 in (1.727 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.8895 mm)

AD7781CRUZ-REEL

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

5 V

1

20

0.0006 %

3 V

Offset Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

105 °C (221 °F)

-5 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

LTC2379IMS-18#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.1 V

1.6 MHz

1

CMOS

18

0.0008 %

2.5 V

2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

0.02 in (0.5 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Dual

412 ns

R-PDSO-G16

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.159 in (4.039 mm)

MAX1138EEE

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

12

Yes

2.048 V

94.4 kHz

1

BICMOS

10

0.0977 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP16,.25

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

6.8 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.89 mm)

MAX1138EEE+

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

12

Yes

2.128 V

53 kHz

1

BICMOS

10

0.0977 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP16,.25

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

-2.128 V

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Track

Dual

6.8 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.89 mm)

MAX11619EEE+T

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

4

Yes

1.25 V

300 kHz

1

BICMOS

10

0.0977 %

3 V

Binary

3/3.3 V

Small Outline, Shrink Pitch

SSOP16,.25

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

-1.25 V

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Track

Dual

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.89 mm)

MAX1239LEEE

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

12

Yes

1.024 V

94.4 kHz

1

BICMOS

12

0.0244 %

3 V

Binary, 2's Complement Binary

3/3.3 V

Small Outline, Shrink Pitch

SSOP16,.25

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

-1.024 V

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

7.5 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

245 °C (473 °F)

0.193 in (4.9 mm)

MAX1239LEEE+

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

12

Yes

1.024 V

94.4 kHz

1

BICMOS

12

0.0244 %

3 V

Binary, 2's Complement Binary

Small Outline, Shrink Pitch

0.025 in (0.635 mm)

85 °C (185 °F)

-1.024 V

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

7.5 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD7715ARZ-5

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

1

Yes

2.5 V

1

CMOS

16

0.0015 %

5 V

Binary, Offset Binary

3/5,5 V

Small Outline

SOP16,.4

Other Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G16

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e3

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

LTC2376IMS-18#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.1 V

250 kHz

1

CMOS

18

0.0007 %

2.5 V

2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

0.02 in (0.5 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

3 µs

R-PDSO-G16

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.159 in (4.039 mm)

LTC2377IDE-20#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

No Lead

16

HVSON

Rectangular

Plastic/Epoxy

1

Yes

5.1 V

500 kHz

1

CMOS

20

0.0002 %

2.5 V

2's Complement Binary

Small Outline, Heat Sink/Slug, Very Thin Profile

0.018 in (0.45 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

1.5 µs

R-PDSO-N16

1

0.031 in (0.8 mm)

0.118 in (3 mm)

e3

30 s

260 °C (500 °F)

0.157 in (4 mm)

MX7705EUE

Maxim Integrated

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

1.75 V

38.4 kHz

1

BICMOS

16

0.003 %

3 V

Binary, Offset Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-1 V

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

R-PDSO-G16

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e0

0.197 in (5 mm)

MX7705EUE+

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

1.75 V

39 kHz

1

BICMOS

16

0.003 %

3 V

Binary, Offset Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-1 V

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Track

Dual

R-PDSO-G16

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

HCPL-786J#500E

Broadcom

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

1

Yes

320 mV

1

15

0.0916 %

5 V

Binary

Small Outline

0.05 in (1.27 mm)

85 °C (185 °F)

-320 mV

Serial

-40 °C (-40 °F)

Matte Tin

Dual

47 µs

R-PDSO-G16

1

0.143 in (3.632 mm)

0.295 in (7.493 mm)

No

e3

260 °C (500 °F)

0.406 in (10.312 mm)

ACPL-796J-060E

Broadcom

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

1

Yes

320 mV

1

16

0.0229 %

5 V

Binary

Small Outline

0.05 in (1.27 mm)

105 °C (221 °F)

-320 mV

Serial

-40 °C (-40 °F)

Tin

Dual

R-PDSO-G16

1

0.154 in (3.9 mm)

0.295 in (7.493 mm)

No

e3

260 °C (500 °F)

0.406 in (10.312 mm)

CA3162E

Renesas Electronics

Analog To Digital Converter, Dual-Slope

Commercial

Through-Hole

16

DIP

Rectangular

Plastic/Epoxy

1

No

200 mV

1

Bipolar

4

5 V

Binary Coded Decimal

In-Line

DIP16,.3

70 °C (158 °F)

-200 mV

Parallel, 4 Bits

0 °C (32 °F)

Dual

R-PDIP-T16

HCPL-786J-000E

Broadcom

Analog To Digital Converter, Delta-Sigma

Industrial

Through-Hole

16

DIP

Rectangular

Plastic/Epoxy

1

No

320 mV

1

15

0.0916 %

5 V

Binary

In-Line

0.1 in (2.54 mm)

85 °C (185 °F)

-320 mV

Serial

-40 °C (-40 °F)

Matte Tin

Dual

47 µs

R-PDIP-T16

1

0.185 in (4.7 mm)

0.3 in (7.62 mm)

No

e3

260 °C (500 °F)

0.386 in (9.8 mm)

5962-9559201MEA

Analog Devices

Analog To Digital Converter, Successive Approximation

Military

Through-Hole

16

DIP

Rectangular

Ceramic, Metal-Sealed Cofired

1

No

10 V

100 kHz

1

BICMOS

MIL-STD-883

16

0.0031 %

12 V

Binary

5,±12 V

-12 V

In-Line

DIP16,.3

Analog to Digital Converters

0.1 in (2.54 mm)

125 °C (257 °F)

-10 V

Serial

-55 °C (-67 °F)

Tin Lead

Dual

R-CDIP-T16

Yes

e0

AD677JN

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Through-Hole

16

DIP

Rectangular

Plastic/Epoxy

1

No

10 V

100 kHz

1

BICMOS

16

12 V

Binary

5,±12 V

-12 V

In-Line

DIP16,.3

Analog to Digital Converters

0.1 in (2.54 mm)

70 °C (158 °F)

-10 V

Serial

0 °C (32 °F)

Tin Lead

Sample

Dual

R-PDIP-T16

0.21 in (5.33 mm)

0.3 in (7.62 mm)

No

e0

0.793 in (20.13 mm)

AD677JNZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Through-Hole

16

DIP

Rectangular

Plastic/Epoxy

1

No

10 V

100 kHz

1

BICMOS

16

12 V

Binary

5,±12 V

-12 V

In-Line

DIP16,.3

Analog to Digital Converters

0.1 in (2.54 mm)

70 °C (158 °F)

-10 V

Serial

0 °C (32 °F)

Matte Tin

Sample

Dual

R-PDIP-T16

0.21 in (5.33 mm)

0.3 in (7.62 mm)

No

e3

0.793 in (20.13 mm)

AD7417ARZ-REEL

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

4

Yes

2.625 V

1

10

0.0977 %

3 V

2's Complement Binary

Small Outline

0.05 in (1.27 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

15 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.39 in (9.9 mm)

AD7417ARZ-REEL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

4

Yes

2.625 V

1

10

0.0977 %

3 V

2's Complement Binary

Small Outline

0.05 in (1.27 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

15 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.39 in (9.9 mm)

Analog-to-Digital Converters

Analog-to-digital converters (ADCs) are electronic devices that convert continuous analog signals into digital signals, which can be processed by digital circuits, microcontrollers, or computers. ADCs are essential components in many electronic systems, as they allow the measurement and processing of physical signals, such as temperature, pressure, light, and sound.

ADCs work by sampling the analog signal at regular intervals and quantizing the sampled signal into a series of digital values. The sampling rate and the resolution of the ADC determine the accuracy and the bandwidth of the digital signal. ADCs may also include features such as amplification, filtering, or signal conditioning, to improve the accuracy and stability of the digital signal.

ADCs can be classified based on their architecture and their application. The most common types of ADCs are successive approximation ADCs, delta-sigma ADCs, and pipeline ADCs. Each type has its advantages and limitations, depending on the application and the required performance.

ADCs are used in a wide range of applications, from consumer electronics, such as smartphones and digital cameras, to industrial automation, medical devices, and scientific instruments. They play a crucial role in the conversion of physical signals into digital signals, allowing the processing, storage, and transmission of data in electronic systems.

Overall, ADCs are essential components in many electronic systems, providing the necessary signal conversion for a wide range of applications. Their accuracy, speed, and resolution determine the performance and the functionality of many electronic devices and systems.