Part | RoHS | Manufacturer | Converter Type | Temperature Grade | Terminal Form | No. of Terminals | Package Code | Package Shape | Total Dose (V) | Package Body Material | No. of Analog In Channels | Surface Mount | Maximum Supply Voltage | Maximum Analog Input Voltage | Sample Rate | No. of Functions | Technology | Screening Level | Nominal Bandwidth | No. of Bits | Maximum Supply Current | Maximum Linearity Error (EL) | Nominal Supply Voltage | Output Bit Code | Power Supplies (V) | Nominal Negative Supply Voltage | Package Style (Meter) | Package Equivalence Code | Sub-Category | Minimum Supply Voltage | Terminal Pitch | Maximum Operating Temperature | Minimum Analog Input Voltage | Output Format | Minimum Operating Temperature | Terminal Finish | Sample and Hold/Track and Hold | Terminal Position | Maximum Conversion Time | JESD-30 Code | Moisture Sensitivity Level (MSL) | Maximum Seated Height | Width | Qualification | Additional Features | JESD-609 Code | Maximum Time At Peak Reflow Temperature (s) | Peak Reflow Temperature (C) | Length | Input Bit Code |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Automotive |
No Lead |
64 |
HVQCCN |
Square |
Plastic/Epoxy |
8 |
Yes |
12 V |
600 kHz |
1 |
CMOS |
14 |
50.1 mA |
0.0061 % |
5 V |
Binary, 2's Complement Binary |
3.3,5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC64,.35SQ,20 |
Analog to Digital Converters |
2.7 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-12 V |
Serial, Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
1.45 µs |
S-PQCC-N64 |
3 |
0.039 in (1 mm) |
0.354 in (9 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.354 in (9 mm) |
||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
48 |
HVQCCN |
Square |
Plastic/Epoxy |
4 |
Yes |
2 V |
160 MHz |
1 |
12 |
490 mA |
1.8 V |
Offset Binary, 2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-2 V |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold Silver |
Quad |
S-PQCC-N48 |
3 |
0.039 in (1 mm) |
0.276 in (7 mm) |
Peak-to-peak input voltage range: 2 V |
e4 |
30 s |
260 °C (500 °F) |
0.276 in (7 mm) |
||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Delta-Sigma |
Automotive |
No Lead |
16 |
HVQCCN |
Square |
Plastic/Epoxy |
1 |
Yes |
250 mV |
1 |
CMOS |
16 |
10.5 mA |
0.0061 % |
5 V |
Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.12SQ,20 |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-250 mV |
Serial |
-40 °C (-40 °F) |
Quad |
S-PQCC-N20 |
0.039 in (1 mm) |
0.118 in (3 mm) |
0.118 in (3 mm) |
||||||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
64 |
HVQCCN |
Square |
Plastic/Epoxy |
4 |
Yes |
2 V |
80 MHz |
1 |
CMOS |
12 |
0.0488 % |
3.3 V |
Offset Binary, 2's Complement Binary |
3.3 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC64,.35SQ,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
0 mV |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
S-PQCC-N64 |
3 |
0.039 in (1 mm) |
0.354 in (9 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.354 in (9 mm) |
|||||||||||
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
32 |
LQFP |
Square |
Plastic/Epoxy |
1 |
Yes |
2.6 V |
20 MHz |
1 |
CMOS |
14 |
0.0232 % |
3.3 V |
Offset Binary, 2's Complement Binary |
Flatpack, Low Profile |
0.031 in (0.8 mm) |
85 °C (185 °F) |
0 mV |
Parallel, Word |
-40 °C (-40 °F) |
Tin Lead |
Sample |
Quad |
S-PQFP-G32 |
3 |
0.063 in (1.6 mm) |
0.276 in (7 mm) |
e0 |
40 s |
260 °C (500 °F) |
0.276 in (7 mm) |
||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
No Lead |
16 |
HVQCCN |
Square |
Plastic/Epoxy |
1 |
Yes |
2.525 V |
1 MHz |
1 |
CMOS |
12 |
6 mA |
0.0122 % |
3 V |
Binary |
1.8/5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.16SQ,25 |
Analog to Digital Converters |
1.65 V |
0.026 in (0.65 mm) |
85 °C (185 °F) |
0 mV |
Serial |
-40 °C (-40 °F) |
Nickel/Palladium/Gold |
Sample |
Quad |
782 ns |
S-PQCC-N16 |
2 |
0.039 in (1 mm) |
0.157 in (4 mm) |
No |
e4 |
260 °C (500 °F) |
0.157 in (4 mm) |
|||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
64 |
TFQFP |
Square |
Plastic/Epoxy |
2 |
Yes |
2.02 V |
40 MHz |
1 |
CMOS |
12 |
0.061 % |
3.3 V |
Offset Binary, 2's Complement Binary |
3.3 V |
Flatpack, Thin Profile, Fine Pitch |
TQFP64,.47SQ |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
0 mV |
Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
S-PQFP-G64 |
4 |
0.047 in (1.2 mm) |
0.394 in (10 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.394 in (10 mm) |
|||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
48 |
HVQCCN |
Square |
Plastic/Epoxy |
2 |
Yes |
2 V |
80 MHz |
1 |
14 |
0.0092 % |
1.8 V |
Offset Binary, 2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-2 V |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Quad |
S-PQCC-N48 |
3 |
0.039 in (1 mm) |
0.276 in (7 mm) |
e4 |
30 s |
260 °C (500 °F) |
0.276 in (7 mm) |
|||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
64 |
TFQFP |
Square |
Plastic/Epoxy |
2 |
Yes |
4 V |
40 MHz |
2 |
CMOS |
12 |
110 mA |
0.0488 % |
5 V |
Offset Binary, 2's Complement Binary |
5 V |
Flatpack, Thin Profile, Fine Pitch |
TQFP64,.47SQ |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-4 V |
Parallel, Word |
-40 °C (-40 °F) |
Matte Tin |
Sample |
Quad |
S-PQFP-G64 |
3 |
0.047 in (1.2 mm) |
0.394 in (10 mm) |
No |
Peak-to-peak input voltage range: 4 V |
e3 |
30 s |
260 °C (500 °F) |
0.394 in (10 mm) |
|||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
Gull Wing |
8 |
TSSOP |
Square |
Plastic/Epoxy |
1 |
Yes |
5.5 V |
360 kHz |
1 |
CMOS |
12 |
0.0244 % |
5 V |
Binary |
5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP8,.19 |
Analog to Digital Converters |
0.026 in (0.65 mm) |
85 °C (185 °F) |
0 mV |
Serial |
-40 °C (-40 °F) |
Sample |
Dual |
S-PDSO-G8 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
0.118 in (3 mm) |
||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
48 |
HVQCCN |
Square |
Plastic/Epoxy |
2 |
Yes |
2 V |
125 MHz |
1 |
14 |
1.8 V |
Offset Binary, 2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
0.02 in (0.5 mm) |
105 °C (221 °F) |
-2 V |
Serial, Parallel, Word |
-50 °C (-58 °F) |
Nickel Palladium Gold Silver |
Quad |
S-PQCC-N48 |
3 |
0.039 in (1 mm) |
0.276 in (7 mm) |
Peak-to-peak input voltage range: 2 V |
e4 |
30 s |
260 °C (500 °F) |
0.276 in (7 mm) |
|||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
No Lead |
16 |
HVQCCN |
Square |
Plastic/Epoxy |
2 |
Yes |
2.525 V |
500 kHz |
1 |
CMOS |
16 |
0.0031 % |
2.7 V |
Binary |
1.8/5,3/5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.16SQ,25 |
Analog to Digital Converters |
0.026 in (0.65 mm) |
85 °C (185 °F) |
0 mV |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
1.636 µs |
S-PQCC-N16 |
2 |
0.039 in (1 mm) |
0.157 in (4 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.157 in (4 mm) |
||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Ball |
196 |
LFBGA |
Square |
Plastic/Epoxy |
2 |
Yes |
1.25 V |
750 MHz |
1 |
12 |
350 mA |
0.1221 % |
1.8 V |
Offset Binary, 2's Complement Binary |
1.8,3.3 V |
Grid Array, Low Profile, Fine Pitch |
BGA196,14X14,32 |
Analog to Digital Converters |
0.031 in (0.8 mm) |
85 °C (185 °F) |
-1.25 V |
Parallel, Word |
-40 °C (-40 °F) |
Tin Silver Copper |
Track |
Bottom |
S-PBGA-B196 |
3 |
0.055 in (1.4 mm) |
0.472 in (12 mm) |
No |
e1 |
30 s |
260 °C (500 °F) |
0.472 in (12 mm) |
|||||||||||
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
32 |
LQFP |
Square |
Plastic/Epoxy |
1 |
Yes |
3.1 V |
80 MHz |
1 |
CMOS |
12 |
0.0977 % |
3.3 V |
Offset Binary, 2's Complement Binary |
Flatpack, Low Profile |
0.031 in (0.8 mm) |
85 °C (185 °F) |
0 mV |
Parallel, Word |
-40 °C (-40 °F) |
Tin Lead |
Sample |
Quad |
S-PQFP-G32 |
3 |
0.063 in (1.6 mm) |
0.276 in (7 mm) |
e0 |
40 s |
260 °C (500 °F) |
0.276 in (7 mm) |
||||||||||||||||
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
80 |
HTFQFP |
Square |
Plastic/Epoxy |
8 |
Yes |
2.02 V |
40 MHz |
1 |
CMOS |
10 |
0.1953125 % |
3.3 V |
Binary |
Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch |
TQFP80,.55SQ |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-2.02 V |
Serial |
-40 °C (-40 °F) |
Sample |
Quad |
S-PQFP-G80 |
0.047 in (1.2 mm) |
0.472 in (12 mm) |
0.472 in (12 mm) |
||||||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
64 |
HVQCCN |
Square |
Plastic/Epoxy |
8 |
Yes |
2 V |
80 MHz |
1 |
12 |
0.0269 % |
1.8 V |
Offset Binary, 2's Complement Binary |
1.8 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC64,.35SQ,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-2 V |
Serial, Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
S-PQCC-N64 |
3 |
0.039 in (1 mm) |
0.354 in (9 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.354 in (9 mm) |
||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
Gull Wing |
48 |
TFQFP |
Square |
Plastic/Epoxy |
1 |
Yes |
4.2 V |
500 kHz |
1 |
18 |
0.0038 % |
5 V |
Binary |
3/5,5 V |
Flatpack, Thin Profile, Fine Pitch |
TQFP48,.35SQ |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
0 mV |
Parallel, 8 Bits, Parallel, Word |
-40 °C (-40 °F) |
Sample |
Quad |
1.52 µs |
S-PQFP-G48 |
0.047 in (1.2 mm) |
0.276 in (7 mm) |
No |
0.276 in (7 mm) |
||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Commercial |
Gull Wing |
8 |
TSSOP |
Square |
Plastic/Epoxy |
1 |
Yes |
5.5 V |
200 Hz |
1 |
CMOS |
12 |
0.0244 % |
3.3 V |
Binary |
3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
SSOP8,.19 |
Analog to Digital Converters |
0.026 in (0.65 mm) |
70 °C (158 °F) |
0 mV |
Serial |
0 °C (32 °F) |
Sample |
Dual |
3.5 µs |
S-PDSO-G8 |
0.043 in (1.1 mm) |
0.118 in (3 mm) |
No |
0.118 in (3 mm) |
|||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Delta-Sigma |
Industrial |
Gull Wing |
32 |
TQFP |
Square |
Plastic/Epoxy |
2 |
Yes |
5.5 V |
96 kHz |
1 |
CMOS |
24 |
5 V |
2's Complement Binary |
3.3,5 V |
Flatpack, Thin Profile |
TQFP32,.35SQ,32 |
Analog to Digital Converters |
0.031 in (0.8 mm) |
85 °C (185 °F) |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Quad |
S-PQFP-G32 |
1 |
0.047 in (1.2 mm) |
0.276 in (7 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.276 in (7 mm) |
||||||||||||||
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
J Bend |
20 |
QCCJ |
Square |
Plastic/Epoxy |
11 |
Yes |
5.5 V |
38 kHz |
1 |
CMOS |
10 |
0.0977 % |
5 V |
Binary |
Chip Carrier |
0.05 in (1.27 mm) |
85 °C (185 °F) |
0 mV |
Serial |
-40 °C (-40 °F) |
Tin |
Sample |
Quad |
21 µs |
S-PQCC-J20 |
0.18 in (4.57 mm) |
0.353 in (8.965 mm) |
No |
e3 |
0.353 in (8.965 mm) |
|||||||||||||||||
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Military |
No Lead |
20 |
QCCN |
Square |
Ceramic, Metal-Sealed Cofired |
8 |
Yes |
5.5 V |
87 kHz |
1 |
CMOS |
10 |
0.0977 % |
2.7 V |
Binary |
3/5 V |
Chip Carrier |
LCC20,.35SQ |
Analog to Digital Converters |
0.05 in (1.27 mm) |
125 °C (257 °F) |
0 mV |
Serial |
-55 °C (-67 °F) |
Sample |
Quad |
25 µs |
S-CQCC-N20 |
0.08 in (2.03 mm) |
0.35 in (8.89 mm) |
No |
0.35 in (8.89 mm) |
||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Commercial |
Ball |
257 |
LFBGA |
Square |
Plastic/Epoxy |
8 |
Yes |
1.42 V |
65 MHz |
1 |
CMOS |
10 |
375 mA |
0.2441 % |
1.8 V |
Offset Binary |
1.8,3.3 V |
Grid Array, Low Profile, Fine Pitch |
BGA257,19X19,32 |
Analog to Digital Converters |
0.031 in (0.8 mm) |
70 °C (158 °F) |
760 mV |
Parallel, Word |
0 °C (32 °F) |
Tin Silver Copper |
Track |
Bottom |
200 ns |
S-PBGA-B257 |
3 |
0.055 in (1.4 mm) |
0.63 in (16 mm) |
No |
e1 |
30 s |
260 °C (500 °F) |
0.63 in (16 mm) |
|||||||||
|
Texas Instruments |
Analog To Digital Converter, Delta-Sigma |
Industrial |
Gull Wing |
32 |
TQFP |
Square |
Plastic/Epoxy |
12 |
Yes |
2 V |
96 kHz |
1 |
CMOS |
24 |
35 mA |
5 V |
2's Complement Binary |
3.3,5 V |
Flatpack, Thin Profile |
TQFP32,.35SQ,32 |
Analog to Digital Converters |
0.031 in (0.8 mm) |
85 °C (185 °F) |
0 mV |
Serial |
-40 °C (-40 °F) |
Nickel/Palladium/Gold |
Quad |
S-PQFP-G32 |
1 |
0.047 in (1.2 mm) |
0.276 in (7 mm) |
No |
e4 |
260 °C (500 °F) |
0.276 in (7 mm) |
|||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
64 |
HVQCCN |
Square |
Plastic/Epoxy |
4 |
Yes |
2 V |
80 MHz |
1 |
CMOS |
14 |
0.0275 % |
3.3 V |
Binary, Offset Binary, 2's Complement Binary |
3.3 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC64,.35SQ,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
0 mV |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
S-PQCC-N64 |
3 |
0.039 in (1 mm) |
0.354 in (9 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.354 in (9 mm) |
|||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
64 |
HVQCCN |
Square |
Plastic/Epoxy |
4 |
Yes |
1.25 V |
500 MHz |
1 |
14 |
1.9 V |
Offset Binary, 2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-1.25 V |
Serial, Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
S-PQCC-N64 |
3 |
0.039 in (1 mm) |
0.354 in (9 mm) |
Peak-to-peak input voltage range: 1.25 V |
e4 |
30 s |
260 °C (500 °F) |
0.354 in (9 mm) |
||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
No Lead |
48 |
HVQCCN |
Square |
Plastic/Epoxy |
1 |
Yes |
4.2 V |
1 MHz |
1 |
CMOS |
18 |
48 mA |
0.0019 % |
5 V |
Binary |
3/5,5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC48,.27SQ,20 |
Analog to Digital Converters |
2.7 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
0 mV |
Parallel, 8 Bits, Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
710 ns |
S-PQCC-N48 |
2 |
0.039 in (1 mm) |
0.276 in (7 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.276 in (7 mm) |
||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
64 |
LFQFP |
Square |
Plastic/Epoxy |
1 |
Yes |
3.5 V |
62 MHz |
1 |
CMOS |
14 |
5 V |
Offset Binary, 2's Complement Binary |
3,5 V |
Flatpack, Low Profile, Fine Pitch |
QFP64,.47SQ,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
1.5 V |
Parallel, Word |
-40 °C (-40 °F) |
Track |
Quad |
1 µs |
S-PQFP-G64 |
0.063 in (1.6 mm) |
0.394 in (10 mm) |
No |
0.394 in (10 mm) |
||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Military |
Gull Wing |
52 |
HLQFP |
Square |
Plastic/Epoxy |
1 |
Yes |
2.2 V |
105 MHz |
1 |
Bipolar |
14 |
5 V |
2's Complement Binary |
3.3,5 V |
Flatpack, Heat Sink/Slug, Low Profile |
QFP52,.47SQ |
Analog to Digital Converters |
0.026 in (0.65 mm) |
125 °C (257 °F) |
0 mV |
Parallel, Word |
-55 °C (-67 °F) |
Track |
Quad |
S-PQFP-G52 |
0.063 in (1.6 mm) |
0.394 in (10 mm) |
No |
0.394 in (10 mm) |
|||||||||||||||||
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Military |
No Lead |
20 |
QCCN |
Square |
Ceramic, Metal-Sealed Cofired |
11 |
Yes |
3.6 V |
38 kHz |
1 |
CMOS |
MIL-PRF-38535 Class Q |
10 |
0.0977 % |
3.3 V |
Binary |
Chip Carrier |
0.05 in (1.27 mm) |
125 °C (257 °F) |
0 mV |
Serial |
-55 °C (-67 °F) |
Sample |
Quad |
21 µs |
S-CQCC-N20 |
0.08 in (2.03 mm) |
0.35 in (8.89 mm) |
No |
0.35 in (8.89 mm) |
||||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Automotive |
No Lead |
24 |
HVQCCN |
Square |
Plastic/Epoxy |
1 |
Yes |
5.2 V |
250 kHz |
1 |
20 |
5.8 mA |
0.0004 % |
5 V |
2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
1.65 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-2.5 V |
Serial |
-40 °C (-40 °F) |
Nickel/Palladium/Gold |
Sample |
Quad |
2.5 µs |
S-PQCC-N24 |
2 |
0.039 in (1 mm) |
0.157 in (4 mm) |
e4 |
30 s |
260 °C (500 °F) |
0.157 in (4 mm) |
|||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
56 |
HVQCCN |
Square |
Plastic/Epoxy |
4 |
Yes |
2 V |
125 MHz |
1 |
14 |
97 mA |
1.8 V |
Offset Binary, 2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-2 V |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Quad |
S-PQCC-N56 |
3 |
0.039 in (1 mm) |
0.315 in (8 mm) |
Peak-to-peak input voltage range: 2 V |
e4 |
30 s |
260 °C (500 °F) |
0.315 in (8 mm) |
||||||||||||||||
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Military |
Ball |
376 |
BGA |
Square |
Ceramic, Metal-Sealed Cofired |
1 |
Yes |
2.15 V |
2000 MHz |
1 |
CMOS |
MIL-STD-883 |
10 |
0.1367 % |
1.9 V |
Offset Binary, 2's Complement Binary |
1.9 V |
Grid Array |
PGA376(UNSPEC) |
Analog to Digital Converters |
0.05 in (1.27 mm) |
125 °C (257 °F) |
0 mV |
Parallel, Word |
-55 °C (-67 °F) |
Track |
Bottom |
S-CBGA-B376 |
0.138 in (3.5 mm) |
1.1 in (27.94 mm) |
No |
1.1 in (27.94 mm) |
||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Automotive |
No Lead |
32 |
HVQCCN |
Square |
Plastic/Epoxy |
4 |
Yes |
2.6 V |
500 kHz |
2 |
CMOS |
16 |
35 mA |
0.0122 % |
5 V |
2's Complement Binary |
5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC32,.2SQ,20 |
Analog to Digital Converters |
2.7 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-2.6 V |
Serial |
-40 °C (-40 °F) |
Nickel/Palladium/Gold |
Sample |
Quad |
160 µs |
S-PQCC-N32 |
2 |
0.039 in (1 mm) |
0.197 in (5 mm) |
No |
e4 |
260 °C (500 °F) |
0.197 in (5 mm) |
|||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
48 |
HVQCCN |
Square |
Plastic/Epoxy |
1 |
Yes |
4.096 V |
1 MHz |
1 |
16 |
0.0015 % |
5 V |
Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
2.7 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
0 mV |
Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
700 ns |
S-PQCC-N48 |
2 |
0.039 in (1 mm) |
0.276 in (7 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.276 in (7 mm) |
|||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
Gull Wing |
48 |
TFQFP |
Square |
Plastic/Epoxy |
1 |
Yes |
3.3 V |
8 MHz |
1 |
CMOS |
14 |
90 mA |
0.0305 % |
3.3 V |
Binary, 2's Complement Binary |
3.3 V |
Flatpack, Thin Profile, Fine Pitch |
TQFP48,.35SQ |
Other Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-3.3 V |
Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
125 ns |
S-PQFP-G48 |
2 |
0.047 in (1.2 mm) |
0.276 in (7 mm) |
No |
Peak-to-peak input voltage range: 3.3 V |
e4 |
30 s |
260 °C (500 °F) |
0.276 in (7 mm) |
||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Automotive |
No Lead |
24 |
HVQCCN |
Square |
Plastic/Epoxy |
4 |
Yes |
10 V |
1 MHz |
1 |
12 |
3.6 mA |
0.036 % |
5 V |
Binary |
±10/±15,3/3.3,5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC24,.16SQ,20 |
Analog to Digital Converters |
1.65 V |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-10 V |
Serial |
-40 °C (-40 °F) |
Nickel/Palladium/Gold |
Sample |
Quad |
S-PQCC-N24 |
3 |
0.039 in (1 mm) |
0.157 in (4 mm) |
No |
e4 |
260 °C (500 °F) |
0.157 in (4 mm) |
|||||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
No Lead |
10 |
HVSON |
Square |
Plastic/Epoxy |
1 |
Yes |
5 V |
400 kHz |
1 |
18 |
1.2 mA |
0.0011 % |
3 V |
2's Complement Binary |
3 V |
Small Outline, Heat Sink/Slug, Very Thin Profile |
SOLCC10,.12,20 |
Analog to Digital Converters |
1.65 V |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-2.5 V |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Dual |
1.3 µs |
S-PDSO-N10 |
2 |
0.039 in (1 mm) |
0.118 in (3 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
|||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
40 |
HVQCCN |
Square |
Plastic/ Epoxy |
2 |
Yes |
3.2 V |
125 MHz |
1 |
14 |
80 mA |
0.04577 % |
1.8 V |
Offset Binary, 2’s Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC40,.20SQ,16 |
105 °C (221 °F) |
-3.2 V |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Quad |
S-XQCC-N40 |
3 |
0.031 in (0.8 mm) |
0.197 in (5 mm) |
Peak-to-peak input voltage range: 3.2 V |
e4 |
30 s |
260 °C (500 °F) |
0.197 in (5 mm) |
|||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
No Lead |
48 |
HVQCCN |
Square |
Plastic/Epoxy |
1 |
Yes |
4.2 V |
2 MHz |
1 |
16 |
0.0038 % |
5 V |
Binary |
3.3/5,5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC48,.27SQ,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
0 mV |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
391 ns |
S-PQCC-N48 |
2 |
0.039 in (1 mm) |
0.276 in (7 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.276 in (7 mm) |
|||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
32 |
HVQCCN |
Square |
Plastic/Epoxy |
1 |
Yes |
2 V |
65 MHz |
1 |
CMOS |
12 |
0.0488 % |
3.3 V |
Binary, Offset Binary, 2's Complement Binary |
3.3 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC32,.2SQ,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-2 V |
Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
S-PQCC-N32 |
3 |
0.039 in (1 mm) |
0.197 in (5 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.197 in (5 mm) |
|||||||||||
|
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Industrial |
No Lead |
48 |
HVQCCN |
Square |
Plastic/Epoxy |
1 |
Yes |
4.111 V |
1 MHz |
1 |
CMOS |
18 |
0.001 % |
5 V |
Binary |
3/5,5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC48,.27SQ,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-4.111 V |
Parallel, 8 Bits, Parallel, Word |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
650 ns |
S-PQCC-N48 |
2 |
0.039 in (1 mm) |
0.276 in (7 mm) |
No |
e4 |
30 s |
260 °C (500 °F) |
0.276 in (7 mm) |
||||||||||
|
Texas Instruments |
Analog To Digital Converter, Delta-Sigma |
Automotive |
No Lead |
40 |
HVQCCN |
Square |
Plastic/Epoxy |
4 |
Yes |
14.2 V |
768 kHz |
1 |
AEC-Q100 |
32 |
3.3 V |
2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC40,.20SQ,20 |
0.02 in (0.5 mm) |
125 °C (257 °F) |
0 mV |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Quad |
S-PQCC-N40 |
2 |
0.031 in (0.8 mm) |
0.197 in (5 mm) |
e4 |
30 s |
260 °C (500 °F) |
0.197 in (5 mm) |
||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
48 |
HVQCCN |
Square |
Plastic/Epoxy |
1 |
Yes |
2.6 V |
170 MHz |
1 |
CMOS |
11 |
0.0977 % |
3.3 V |
Offset Binary, 2's Complement Binary |
3.3 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC48,.27SQ,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
0 mV |
Parallel, Word |
-40 °C (-40 °F) |
Matte Tin |
Sample |
Quad |
5.8 ns |
S-PQCC-N48 |
3 |
0.031 in (0.8 mm) |
0.276 in (7 mm) |
No |
e3 |
30 s |
260 °C (500 °F) |
0.276 in (7 mm) |
||||||||||
Texas Instruments |
Analog To Digital Converter, Successive Approximation |
Automotive |
No Lead |
20 |
VQCCN |
Square |
Plastic/Epoxy |
8 |
Yes |
2.5 V |
1 MHz |
1 |
12 |
0.0244 % |
3 V |
Binary, 2's Complement Binary |
Chip Carrier, Very Thin Profile |
0.02 in (0.5 mm) |
125 °C (257 °F) |
0 mV |
Serial |
-40 °C (-40 °F) |
Sample |
Quad |
700 ns |
S-PQCC-N20 |
0.031 in (0.8 mm) |
0.157 in (4 mm) |
0.157 in (4 mm) |
|||||||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Industrial |
No Lead |
64 |
HVQCCN |
Square |
Plastic/Epoxy |
2 |
Yes |
2.5 V |
160 MHz |
1 |
14 |
130 mA |
1.8 V |
Offset Binary, 2's Complement Binary |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-2.5 V |
Serial |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Sample |
Quad |
S-PQCC-N64 |
3 |
0.039 in (1 mm) |
0.354 in (9 mm) |
Peak-to-peak input voltage range: 2.5 V |
e4 |
30 s |
260 °C (500 °F) |
0.354 in (9 mm) |
|||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Proprietary Method |
Commercial |
Gull Wing |
48 |
TFQFP |
Square |
Plastic/Epoxy |
1 |
Yes |
1.39 V |
65 MHz |
1 |
CMOS |
10 |
0.2441 % |
1.8 V |
Offset Binary |
1.8 V |
Flatpack, Thin Profile, Fine Pitch |
TQFP48,.35SQ |
Analog to Digital Converters |
0.02 in (0.5 mm) |
70 °C (158 °F) |
780 mV |
Parallel, Word |
0 °C (32 °F) |
Sample |
Quad |
S-PQFP-G48 |
0.047 in (1.2 mm) |
0.276 in (7 mm) |
No |
0.276 in (7 mm) |
||||||||||||||||
|
Texas Instruments |
Analog To Digital Converter, Delta-Sigma |
Industrial |
No Lead |
48 |
HVQCCN |
Square |
Plastic/Epoxy |
4 |
Yes |
5 V |
3.125 kHz |
1 |
20 |
0.025 % |
5 V |
Binary, Offset Binary |
3,5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC48,.27SQ,20 |
Analog to Digital Converters |
0.02 in (0.5 mm) |
85 °C (185 °F) |
Serial |
-40 °C (-40 °F) |
Matte Tin |
Sample |
Quad |
S-PQCC-N48 |
3 |
0.035 in (0.9 mm) |
0.276 in (7 mm) |
No |
e3 |
30 s |
260 °C (500 °F) |
0.276 in (7 mm) |
|||||||||||||
Texas Instruments |
Analog To Digital Converter, Delta-Sigma |
Industrial |
Ball |
292 |
BGA |
Square |
Plastic/Epoxy |
1 |
Yes |
800 mV |
2000 MHz |
1 |
CMOS |
10 |
985 mA |
0.1367 % |
1.9 V |
Offset Binary, 2's Complement Binary |
1.9 V |
Grid Array |
BGA292,20X20,50 |
Analog to Digital Converters |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-800 mV |
Parallel, Word |
-40 °C (-40 °F) |
Tin Lead |
Track |
Bottom |
S-PBGA-B292 |
3 |
0.102 in (2.58 mm) |
1.063 in (27 mm) |
No |
Peak-to-peak input voltage range: 0.8 V |
e0 |
20 s |
220 °C (428 °F) |
1.063 in (27 mm) |
Analog-to-digital converters (ADCs) are electronic devices that convert continuous analog signals into digital signals, which can be processed by digital circuits, microcontrollers, or computers. ADCs are essential components in many electronic systems, as they allow the measurement and processing of physical signals, such as temperature, pressure, light, and sound.
ADCs work by sampling the analog signal at regular intervals and quantizing the sampled signal into a series of digital values. The sampling rate and the resolution of the ADC determine the accuracy and the bandwidth of the digital signal. ADCs may also include features such as amplification, filtering, or signal conditioning, to improve the accuracy and stability of the digital signal.
ADCs can be classified based on their architecture and their application. The most common types of ADCs are successive approximation ADCs, delta-sigma ADCs, and pipeline ADCs. Each type has its advantages and limitations, depending on the application and the required performance.
ADCs are used in a wide range of applications, from consumer electronics, such as smartphones and digital cameras, to industrial automation, medical devices, and scientific instruments. They play a crucial role in the conversion of physical signals into digital signals, allowing the processing, storage, and transmission of data in electronic systems.
Overall, ADCs are essential components in many electronic systems, providing the necessary signal conversion for a wide range of applications. Their accuracy, speed, and resolution determine the performance and the functionality of many electronic devices and systems.