Automotive Analog-to-Digital Converters 1,880

Reset All
Part RoHS Manufacturer Converter Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material No. of Analog In Channels Surface Mount Maximum Supply Voltage Maximum Analog Input Voltage Sample Rate No. of Functions Technology Screening Level Nominal Bandwidth No. of Bits Maximum Supply Current Maximum Linearity Error (EL) Nominal Supply Voltage Output Bit Code Power Supplies (V) Nominal Negative Supply Voltage Package Style (Meter) Package Equivalence Code Sub-Category Minimum Supply Voltage Terminal Pitch Maximum Operating Temperature Minimum Analog Input Voltage Output Format Minimum Operating Temperature Terminal Finish Sample and Hold/Track and Hold Terminal Position Maximum Conversion Time JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Additional Features JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length Input Bit Code

AMC1304M05QDWRQ1

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

1

Yes

50 mV

78 kHz

1

AEC-Q100

16

0.0076 %

3.3 V

Binary

Small Outline

0.05 in (1.27 mm)

125 °C (257 °F)

-50 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G16

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

Peak-to-peak input voltage range: 50 mV

e4

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

MCP3425A3T-E/CH

Microchip Technology

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

2.048 V

240 Hz

1

TS 16949

16

5 V

2's Complement Binary

5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

0.037 in (0.95 mm)

125 °C (257 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G6

1

0.057 in (1.45 mm)

0.061 in (1.55 mm)

No

e3

40 s

260 °C (500 °F)

0.114 in (2.9 mm)

MCP3427T-E/MF

Microchip Technology

Analog To Digital Converter, Delta-Sigma

Automotive

No Lead

10

HVSON

Square

Plastic/Epoxy

2

Yes

2.048 V

24 kHz

1

TS 16949

16

180 μA

5 V

2's Complement Binary

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC10,.12,20

0.02 in (0.5 mm)

125 °C (257 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-N10

1

0.039 in (1 mm)

0.118 in (3 mm)

No

e3

40 s

260 °C (500 °F)

0.118 in (3 mm)

PGA450TPWRQ1

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

28

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

18 V

2

AEC-Q100

12

15 mA

5 V

Binary

Small Outline, Thin Profile, Shrink Pitch

7 V

0.026 in (0.65 mm)

125 °C (257 °F)

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G28

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e4

30 s

260 °C (500 °F)

0.382 in (9.7 mm)

AD7352YRUZ-500RL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

3 MHz

2

CMOS

12

0.0244 %

2.5 V

Binary

2.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

125 °C (257 °F)

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

AD7356YRUZ-500RL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

5 MHz

1

CMOS

12

0.0244 %

2.5 V

Binary

2.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

125 °C (257 °F)

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

AD7658YSTZ-REEL

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

64

LFQFP

Square

Plastic/Epoxy

6

Yes

12 V

250 kHz

1

CMOS

12

0.0244 %

5 V

2's Complement Binary

5,±5/±15 V

-5 V

Flatpack, Low Profile, Fine Pitch

QFP64,.47SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

125 °C (257 °F)

-10 V

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Track

Quad

3.1 µs

S-PQFP-G64

3

0.063 in (1.6 mm)

0.394 in (10 mm)

No

e3

260 °C (500 °F)

0.394 in (10 mm)

AD9204BCPZRL7-20

Analog Devices

Analog To Digital Converter, Proprietary Method

Automotive

No Lead

64

HVQCCN

Rectangular

2

Yes

2 V

20 MHz

1

CMOS

10

0.0586 %

1.8 V

Offset Binary, 2's Complement Binary, Gray Code

1.8 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC64,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

125 °C (257 °F)

-2 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Quad

50 ns

R-XQCC-N64

3

0.039 in (1 mm)

0.354 in (9 mm)

No

e3

30 s

260 °C (500 °F)

0.354 in (9 mm)

ADC120IPT

STMicroelectronics

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

3.6 V

1 MHz

1

CMOS

12

2 mA

0.026855 %

3.3 V

Binary

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

0.026 in (0.65 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Track

Dual

812.5 ns

R-PDSO-G16

0.047 in (1.2 mm)

0.173 in (4.4 mm)

0.197 in (5 mm)

ADCS7476AIMFE

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.25 V

1 MHz

1

CMOS

12

0.0244 %

3 V

Binary

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

0.037 in (0.95 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

1 µs

R-PDSO-G6

1

0.048 in (1.22 mm)

0.063 in (1.6 mm)

e0

0.115 in (2.92 mm)

ADS7853IPWR

Texas Instruments

Analog To Digital Converter, Proprietary Method

Automotive

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

5.5 V

1 MHz

1

14

10 mA

0.0153 %

5 V

Binary, 2's Complement Binary

3.3,5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

1.65 V

0.026 in (0.65 mm)

125 °C (257 °F)

-1.2 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

450 ns

R-PDSO-G16

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS7952SRHBR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

32

HVQCCN

Square

Plastic/Epoxy

12

Yes

5.25 V

1 MHz

1

CMOS

12

0.0366 %

3.3 V

Binary

1.8/5,3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC32,.2SQ,20

Analog to Digital Converters

1.7 V

0.02 in (0.5 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

800 ns

S-PQCC-N32

3

0.039 in (1 mm)

0.197 in (5 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS7955SDBTRG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

30

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5.02 V

1 MHz

1

CMOS

10

0.0488 %

3.3 V

Binary

1.8/5,3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP30,.25,20

Analog to Digital Converters

0.02 in (0.5 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

800 ns

R-PDSO-G30

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

AMC1035DR

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

1 V

20 kHz

1

16

0.0183 %

3.3 V

Binary

Small Outline

3 V

0.05 in (1.27 mm)

125 °C (257 °F)

-1 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.153 in (3.895 mm)

e4

30 s

260 °C (500 °F)

0.193 in (4.905 mm)

AMC1303M2510DWVR

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

250 mV

78 kHz

1

16

9.8 mA

0.0061 %

5 V

Binary

Small Outline

0.05 in (1.27 mm)

125 °C (257 °F)

-250 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

3

0.11 in (2.8 mm)

0.23 in (5.85 mm)

Peak-to-peak input voltage range: 250 mV

e4

30 s

260 °C (500 °F)

0.295 in (7.5 mm)

PAMC1035DR

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

1.25 V

1

16

0.0183 %

5 V

Binary

Small Outline

0.05 in (1.27 mm)

125 °C (257 °F)

-1.25 V

Serial

-40 °C (-40 °F)

Dual

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

0.193 in (4.9 mm)

PCM1861DBTR

Texas Instruments

Analog To Digital Converter, Proprietary Method

Automotive

Gull Wing

30

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

48 kHz

1

24

3.3 V

2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

0.02 in (0.5 mm)

125 °C (257 °F)

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

R-PDSO-G30

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e4

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

AD7277BRMZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1

Yes

3.6 V

3 MHz

1

10

0.0977 %

3 V

Binary

2.5/3.3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Analog to Digital Converters

0.026 in (0.65 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

291 ns

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD7357WYRUZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

1.6 V

4.2 MHz

1

CMOS

AEC-Q100

14

0.0183 %

2.5 V

Binary

2.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

125 °C (257 °F)

500 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

238 ns

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

AD7657YSTZ-REEL

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

64

LFQFP

Square

Plastic/Epoxy

6

Yes

12 V

250 kHz

1

CMOS

14

0.0092 %

5 V

2's Complement Binary

5,±5/±15 V

-5 V

Flatpack, Low Profile, Fine Pitch

QFP64,.47SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

125 °C (257 °F)

-10 V

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Track

Quad

3.1 µs

S-PQFP-G64

3

0.063 in (1.6 mm)

0.394 in (10 mm)

No

e3

260 °C (500 °F)

0.394 in (10 mm)

ADS7948SRTET

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

16

HVQCCN

Square

Plastic/Epoxy

2

Yes

5.5 V

2 MHz

1

10

0.0488 %

3.3 V

Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

1.65 V

0.02 in (0.5 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

S-PQCC-N16

2

0.031 in (0.8 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADS7950SBDBT

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

30

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

5.25 V

1 MHz

1

CMOS

12

3 mA

0.0244 %

3.3 V

Binary

1.8/5,3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP30,.25,20

Analog to Digital Converters

1.7 V

0.02 in (0.5 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

800 ns

R-PDSO-G30

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

ADS9224RIRHBT

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

32

HQCCN

Square

Plastic/Epoxy

2

Yes

4.096 V

3 MHz

1

16

0.0031 %

5 V

2's Complement Binary

Chip Carrier, Heat Sink/Slug

1.65 V

125 °C (257 °F)

-4.096 V

Serial, Parallel, Word

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Sample

Quad

S-PQCC-N32

2

e4

260 °C (500 °F)

AMC1304L05QDWQ1

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

1

Yes

50 mV

78 kHz

1

AEC-Q100

16

0.0076 %

3.3 V

Binary

Small Outline

0.05 in (1.27 mm)

125 °C (257 °F)

-50 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G16

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

Peak-to-peak input voltage range: 50 mV

e4

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

LTC1864AHMS8#TRPBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1

Yes

5.25 V

250 kHz

1

16

0.0099 %

5 V

Binary

Small Outline, Thin Profile, Shrink Pitch

0.026 in (0.65 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

3.3 µs

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC2325HUKG-12#TRPBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

52

HVQCCN

Rectangular

Plastic/Epoxy

4

Yes

2.064 V

5 MHz

1

CMOS

12

0.0244 %

3.3 V

2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

125 °C (257 °F)

-2.034 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Quad

170 ns

R-PQCC-N52

1

0.031 in (0.8 mm)

0.276 in (7 mm)

e3

30 s

260 °C (500 °F)

0.315 in (8 mm)

MCP3221A6T-E/OTVAO

Microchip Technology

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.8 V

22.3 kHz

1

CMOS

AEC-Q100; TS 16949

12

250 μA

0.0488 %

5 V

Binary

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

0.037 in (0.95 mm)

125 °C (257 °F)

-300 mV

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

R-PDSO-G5

0.057 in (1.45 mm)

0.064 in (1.63 mm)

e3

0.116 in (2.95 mm)

MCP33111-05-E/MS

Microchip Technology

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

10

TSOP

Square

Plastic/Epoxy

1

Yes

5 V

500 kHz

1

AEC-Q100; TS 16949

12

2 mA

1.8 V

Offset Binary

Small Outline, Thin Profile

TSSOP10,.19,20

0.02 in (0.5 mm)

125 °C (257 °F)

-5 V

Serial

-40 °C (-40 °F)

Sample

Dual

1.3 µs

S-PDSO-G10

0.043 in (1.1 mm)

0.118 in (3 mm)

0.118 in (3 mm)

MCP33111-10-E/MS

Microchip Technology

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

10

TSOP

Square

Plastic/Epoxy

1

Yes

5 V

1 MHz

1

AEC-Q100; TS 16949

12

2.4 mA

1.8 V

Offset Binary

Small Outline, Thin Profile

TSSOP10,.19,20

0.02 in (0.5 mm)

125 °C (257 °F)

-5 V

Serial

-40 °C (-40 °F)

Sample

Dual

750 ns

S-PDSO-G10

0.043 in (1.1 mm)

0.118 in (3 mm)

0.118 in (3 mm)

MCP33111D-05-E/MS

Microchip Technology

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

5.1 V

500 kHz

1

AEC-Q100; TS 16949

12

2 mA

1.8 V

2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

0.02 in (0.5 mm)

125 °C (257 °F)

-5.1 V

Serial

-40 °C (-40 °F)

Dual

1.3 µs

S-PDSO-G10

0.043 in (1.1 mm)

0.118 in (3 mm)

0.118 in (3 mm)

MCP3427T-E/UN

Microchip Technology

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

2

Yes

2.048 V

24 kHz

1

TS 16949

16

180 μA

5 V

2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

0.02 in (0.5 mm)

125 °C (257 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

40 s

260 °C (500 °F)

0.118 in (3 mm)

MCP37D21-80E/TE

Microchip Technology

Analog To Digital Converter, Pipelined

Automotive

Ball

121

TFBGA

Square

Plastic/Epoxy

8

Yes

4.46 V

80 MHz

1

AEC-Q100

14

173 mA

1.2 V

Offset Binary, 2's Complement Binary

Grid Array, Thin Profile, Fine Pitch

BGA121,11X11,25

0.026 in (0.65 mm)

125 °C (257 °F)

-4.46 V

Parallel, Word

-40 °C (-40 °F)

Sample

Bottom

12.5 ns

S-PBGA-B121

0.043 in (1.08 mm)

0.315 in (8 mm)

0.315 in (8 mm)

PCM1861DBT

Texas Instruments

Analog To Digital Converter, Proprietary Method

Automotive

Gull Wing

30

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

48 kHz

1

24

3.3 V

2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

0.02 in (0.5 mm)

125 °C (257 °F)

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

R-PDSO-G30

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e4

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

ADS7863IDBQG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

24

SSOP

Rectangular

Plastic/Epoxy

2

Yes

2.525 V

2 MHz

2

12

8 mA

0.0305 %

5 V

2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP24,.24

Analog to Digital Converters

0.025 in (0.635 mm)

125 °C (257 °F)

-500 mV

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold

Sample

Dual

R-PDSO-G24

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.341 in (8.65 mm)

ADS7863IDBQR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

24

SSOP

Rectangular

Plastic/Epoxy

4

Yes

2.525 V

2 MHz

2

CMOS

12

8 mA

0.0305 %

5 V

2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP24,.24

Analog to Digital Converters

0.025 in (0.635 mm)

125 °C (257 °F)

-500 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

13 µs

R-PDSO-G24

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

MCP3422A3T-E/MS

Microchip Technology

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

8

SOP

Square

Plastic/Epoxy

2

Yes

2.048 V

2.4 kHz

1

TS 16949

18

180 μA

0.0035 %

5 V

2's Complement Binary

3/5 V

Small Outline

SOP8,.19

Analog to Digital Converters

0.026 in (0.65 mm)

125 °C (257 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

40 s

260 °C (500 °F)

0.118 in (3 mm)

MCP3422A5-E/MC

Microchip Technology

Analog To Digital Converter, Delta-Sigma

Automotive

No Lead

8

HVSON

Rectangular

Plastic/Epoxy

2

Yes

2.048 V

2.4 kHz

1

TS 16949

18

180 μA

0.0035 %

5 V

2's Complement Binary

3/5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC8,.12,20

Analog to Digital Converters

0.02 in (0.5 mm)

125 °C (257 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-N8

1

0.039 in (1 mm)

0.079 in (2 mm)

No

e3

40 s

260 °C (500 °F)

0.118 in (3 mm)

MCP3425A2T-E/CH

Microchip Technology

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

2.048 V

240 Hz

1

TS 16949

16

5 V

2's Complement Binary

5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

0.037 in (0.95 mm)

125 °C (257 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G6

1

0.057 in (1.45 mm)

0.061 in (1.55 mm)

No

e3

40 s

260 °C (500 °F)

0.114 in (2.9 mm)

TLV320ADC5140IRTWT

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

No Lead

24

HVQCCN

Square

Plastic/Epoxy

4

Yes

3.6 V

768 kHz

1

32

1.8 V

Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Quad

S-PQCC-N24

1

0.031 in (0.8 mm)

0.157 in (4 mm)

e4

30 s

260 °C (500 °F)

0.157 in (4 mm)

AD7357WYRUZ-RL

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

1.6 V

4.2 MHz

1

CMOS

AEC-Q100

14

0.0183 %

2.5 V

Binary

2.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

125 °C (257 °F)

500 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

238 ns

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

AD7866ARU

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

5 V

1 MHz

1

12

0.0366 %

3 V

Binary, 2's Complement Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

800 ns

R-PDSO-G20

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e0

240 °C (464 °F)

0.256 in (6.5 mm)

AD7887ARMZ-REEL

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

2

Yes

5.25 V

125 kHz

1

CMOS

12

0.0488 %

3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Analog to Digital Converters

0.026 in (0.65 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

7.25 µs

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADS131M06IPBSR

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

36

TFQFP

Square

Plastic/Epoxy

6

Yes

3.6 V

32 kHz

1

24

5.9 mA

3 V

2's Complement Binary

Flatpack, Thin Profile, Fine Pitch

TQFP36,.3SQ

1.65 V

0.02 in (0.5 mm)

125 °C (257 °F)

-1.3 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Quad

S-PQFP-G36

2

0.047 in (1.2 mm)

0.197 in (5 mm)

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

MCP3422A7-E/MS

Microchip Technology

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

8

SOP

Square

Plastic/Epoxy

2

Yes

2.048 V

2.4 kHz

1

TS 16949

18

180 μA

0.0035 %

5 V

2's Complement Binary

3/5 V

Small Outline

SOP8,.19

Analog to Digital Converters

0.026 in (0.65 mm)

125 °C (257 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

40 s

260 °C (500 °F)

0.118 in (3 mm)

AD7357BCPZ-RL

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

18

HVQCCN

Rectangular

2

Yes

2.975 V

4.2 MHz

1

14

0.0183 %

2.5 V

Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.026 in (0.65 mm)

125 °C (257 °F)

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Quad

R-XQCC-N18

3

0.031 in (0.8 mm)

0.157 in (4 mm)

e3

260 °C (500 °F)

0.197 in (5 mm)

AD7747ARUZ-REEL7

Analog Devices

Analog To Digital Converter, Proprietary Method

Automotive

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

8.1 Hz

1

24

0.01 %

3 V

Binary

Small Outline, Thin Profile, Shrink Pitch

0.026 in (0.65 mm)

125 °C (257 °F)

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Dual

124 ms

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS7843IDBQRQ1

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

4

Yes

3.6 V

125 kHz

1

CMOS

AEC-Q100

12

0.0488 %

2.7 V

Binary

2.7 V

Small Outline, Shrink Pitch

SSOP16,.25

Analog to Digital Converters

0.025 in (0.635 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

6 µs

R-PDSO-G16

3

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

ADS7952SBDBTRG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

38

TSSOP

Rectangular

Plastic/Epoxy

12

Yes

5.02 V

1 MHz

1

CMOS

12

0.0244 %

3.3 V

Binary

1.8/5,3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP38,.25,20

Analog to Digital Converters

0.02 in (0.5 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

800 ns

R-PDSO-G38

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.382 in (9.7 mm)

Analog-to-Digital Converters

Analog-to-digital converters (ADCs) are electronic devices that convert continuous analog signals into digital signals, which can be processed by digital circuits, microcontrollers, or computers. ADCs are essential components in many electronic systems, as they allow the measurement and processing of physical signals, such as temperature, pressure, light, and sound.

ADCs work by sampling the analog signal at regular intervals and quantizing the sampled signal into a series of digital values. The sampling rate and the resolution of the ADC determine the accuracy and the bandwidth of the digital signal. ADCs may also include features such as amplification, filtering, or signal conditioning, to improve the accuracy and stability of the digital signal.

ADCs can be classified based on their architecture and their application. The most common types of ADCs are successive approximation ADCs, delta-sigma ADCs, and pipeline ADCs. Each type has its advantages and limitations, depending on the application and the required performance.

ADCs are used in a wide range of applications, from consumer electronics, such as smartphones and digital cameras, to industrial automation, medical devices, and scientific instruments. They play a crucial role in the conversion of physical signals into digital signals, allowing the processing, storage, and transmission of data in electronic systems.

Overall, ADCs are essential components in many electronic systems, providing the necessary signal conversion for a wide range of applications. Their accuracy, speed, and resolution determine the performance and the functionality of many electronic devices and systems.