Automotive Analog-to-Digital Converters 1,880

Reset All
Part RoHS Manufacturer Converter Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material No. of Analog In Channels Surface Mount Maximum Supply Voltage Maximum Analog Input Voltage Sample Rate No. of Functions Technology Screening Level Nominal Bandwidth No. of Bits Maximum Supply Current Maximum Linearity Error (EL) Nominal Supply Voltage Output Bit Code Power Supplies (V) Nominal Negative Supply Voltage Package Style (Meter) Package Equivalence Code Sub-Category Minimum Supply Voltage Terminal Pitch Maximum Operating Temperature Minimum Analog Input Voltage Output Format Minimum Operating Temperature Terminal Finish Sample and Hold/Track and Hold Terminal Position Maximum Conversion Time JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Additional Features JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length Input Bit Code

ADUM7701-8BRIZ

Analog Devices

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

320 V

21 MHz

1

CMOS

16

10 mA

0.0061 %

5 V

Binary

Small Outline

SOP8,.4

0.05 in (1.27 mm)

125 °C (257 °F)

-320 V

Serial

-40 °C (-40 °F)

Dual

R-PDSO-G8

3

0.104 in (2.65 mm)

0.23 in (5.85 mm)

30 s

260 °C (500 °F)

0.295 in (7.5 mm)

MAX11198ATE+

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

16

HVQCCN

Rectangular

2

Yes

5.15 V

2 MHz

1

16

0.0023 %

5 V

Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

125 °C (257 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Nickel Gold Palladium

Quad

R-XQCC-N16

1

0.031 in (0.8 mm)

0.079 in (2 mm)

30 s

260 °C (500 °F)

0.118 in (3 mm)

MCP3221A4T-E/OT

Microchip Technology

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.8 V

22.3 kHz

1

CMOS

TS 16949

12

250 μA

0.0488 %

5 V

Binary

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Analog to Digital Converters

0.037 in (0.95 mm)

125 °C (257 °F)

-300 mV

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.064 in (1.63 mm)

No

e3

260 °C (500 °F)

0.116 in (2.95 mm)

MCP33111D-05-E/MN

Microchip Technology

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

10

HVSON

Square

Plastic/Epoxy

1

Yes

5.1 V

500 kHz

1

AEC-Q100; TS 16949

12

2 mA

1.8 V

2's Complement Binary

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC10,.12,20

0.02 in (0.5 mm)

125 °C (257 °F)

-5.1 V

Serial

-40 °C (-40 °F)

Dual

1.3 µs

S-PDSO-N10

0.031 in (0.8 mm)

0.118 in (3 mm)

0.118 in (3 mm)

MCP3422A3-E/MS

Microchip Technology

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

8

SOP

Square

Plastic/Epoxy

2

Yes

2.048 V

2.4 kHz

1

TS 16949

18

180 μA

0.0035 %

5 V

2's Complement Binary

3/5 V

Small Outline

SOP8,.19

Analog to Digital Converters

0.026 in (0.65 mm)

125 °C (257 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

40 s

260 °C (500 °F)

0.118 in (3 mm)

MCP3550-60E/SN

Microchip Technology

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

2.5 V

30.72 kHz

1

TS 16949

22

185 μA

0.0006 %

5 V

2's Complement Binary

2.7/5 V

Small Outline

SOP8,.23

Analog to Digital Converters

0.05 in (1.27 mm)

125 °C (257 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

67.3367 ms

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD4000BRMZ-RL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

5.1 V

2 MHz

1

16

0.0015 %

1.8 V

Binary

Small Outline, Thin Profile, Shrink Pitch

0.02 in (0.5 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

320 ns

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD4696BCPZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

32

HVQCCN

Square

16

Yes

2.875 V

1 MHz

1

16

0.001525 %

5 V

Binary, 2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC32,.2SQ,20

0.02 in (0.5 mm)

125 °C (257 °F)

-1.2 V

Serial

-40 °C (-40 °F)

Quad

415 ns

S-XQCC-N32

0.031 in (0.8 mm)

0.197 in (5 mm)

0.197 in (5 mm)

AD4696BCPZ-RL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

32

HVQCCN

Square

16

Yes

2.875 V

1 MHz

1

16

0.001525 %

5 V

Binary, 2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC32,.2SQ,20

0.02 in (0.5 mm)

125 °C (257 °F)

-1.2 V

Serial

-40 °C (-40 °F)

Quad

415 ns

S-XQCC-N32

0.031 in (0.8 mm)

0.197 in (5 mm)

0.197 in (5 mm)

AD7980ARMZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

5.1 V

1 MHz

1

16

0.0038 %

2.5 V

Binary

2.5/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Analog to Digital Converters

0.02 in (0.5 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

710 ns

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADS1014BQDGSRQ1

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

5.5 V

3.3 kHz

1

AEC-Q100

12

300 μA

0.0122 %

3.3 V

2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

2 V

0.02 in (0.5 mm)

125 °C (257 °F)

-256 mV

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G10

2

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

260 °C (500 °F)

0.118 in (3 mm)

ADS122U04IRTER

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

No Lead

16

HVQCCN

Square

Plastic/Epoxy

4

Yes

5.05 V

2 kHz

1

24

510 μA

0.0015 %

2.5 V

Binary, 2's Complement Binary

-2.5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

2.3 V

0.02 in (0.5 mm)

125 °C (257 °F)

-750 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Quad

520 µs

S-PQCC-N16

2

0.031 in (0.8 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADS7253IRTET

Texas Instruments

Analog To Digital Converter, Proprietary Method

Automotive

No Lead

16

HVQCCN

Square

Plastic/Epoxy

2

Yes

5.5 V

1 MHz

1

12

10 mA

0.0244 %

5 V

Binary, 2's Complement Binary

3.3,5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.12SQ,20

Analog to Digital Converters

1.65 V

0.02 in (0.5 mm)

125 °C (257 °F)

-1.2 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

450 ns

S-PQCC-N16

2

0.031 in (0.8 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADS7887SDCKT

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.25 V

1.25 MHz

1

CMOS

10

2 mA

0.0732 %

3.3 V

Binary

2.5/5 V

Small Outline, Thin Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

2.35 V

0.026 in (0.65 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

560 ns

R-PDSO-G6

2

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

ADS7887SDCKTG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

6

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.25 V

1.25 MHz

1

CMOS

10

0.0732 %

3.3 V

Binary

2.5/5 V

Small Outline, Thin Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

0.026 in (0.65 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Sample

Dual

560 ns

R-PDSO-G6

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

0.079 in (2 mm)

ADS7951SRGER

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

24

HVQCCN

Square

Plastic/Epoxy

8

Yes

5.25 V

1 MHz

1

CMOS

12

3 mA

0.0366 %

3.3 V

Binary

1.8/5,3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC24,.16SQ,20

Analog to Digital Converters

1.7 V

0.02 in (0.5 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

800 ns

S-PQCC-N24

2

0.039 in (1 mm)

0.157 in (4 mm)

No

e4

30 s

260 °C (500 °F)

0.157 in (4 mm)

ADS7956SRHBR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

32

HVQCCN

Square

Plastic/Epoxy

12

Yes

5.25 V

1 MHz

1

CMOS

10

3 mA

0.0488 %

3.3 V

Binary

1.8/5,3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC32,.2SQ,20

Analog to Digital Converters

1.7 V

0.02 in (0.5 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

800 ns

S-PQCC-N32

3

0.039 in (1 mm)

0.197 in (5 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS9120IRGER

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

24

HVQCCN

Square

Plastic/Epoxy

1

Yes

5 V

2.5 MHz

1

16

6.75 mA

0.0011 %

1.8 V

2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

1.65 V

0.02 in (0.5 mm)

125 °C (257 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold

Sample

Quad

290 ns

S-PQCC-N24

2

0.039 in (1 mm)

0.157 in (4 mm)

e4

30 s

260 °C (500 °F)

0.157 in (4 mm)

MCP33111-10-E/MN

Microchip Technology

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

10

HVSON

Square

Plastic/Epoxy

1

Yes

5 V

1 MHz

1

AEC-Q100; TS 16949

12

2.4 mA

1.8 V

Offset Binary

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC10,.12,20

0.02 in (0.5 mm)

125 °C (257 °F)

-5 V

Serial

-40 °C (-40 °F)

Sample

Dual

750 ns

S-PDSO-N10

0.031 in (0.8 mm)

0.118 in (3 mm)

0.118 in (3 mm)

MCP33111D-10-E/MN

Microchip Technology

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

10

HVSON

Square

Plastic/Epoxy

1

Yes

5.1 V

1 MHz

1

AEC-Q100; TS 16949

12

2.4 mA

1.8 V

2's Complement Binary

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC10,.12,20

0.02 in (0.5 mm)

125 °C (257 °F)

-5.1 V

Serial

-40 °C (-40 °F)

Dual

750 ns

S-PDSO-N10

0.031 in (0.8 mm)

0.118 in (3 mm)

0.118 in (3 mm)

MCP3422A6T-E/MS

Microchip Technology

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

8

SOP

Square

Plastic/Epoxy

2

Yes

2.048 V

2.4 kHz

1

TS 16949

18

180 μA

0.0035 %

5 V

2's Complement Binary

3/5 V

Small Outline

SOP8,.19

Analog to Digital Converters

0.026 in (0.65 mm)

125 °C (257 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

40 s

260 °C (500 °F)

0.118 in (3 mm)

MCP3422A7T-E/MS

Microchip Technology

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

8

SOP

Square

Plastic/Epoxy

2

Yes

2.048 V

2.4 kHz

1

TS 16949

18

180 μA

0.0035 %

5 V

2's Complement Binary

3/5 V

Small Outline

SOP8,.19

Analog to Digital Converters

0.026 in (0.65 mm)

125 °C (257 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

40 s

260 °C (500 °F)

0.118 in (3 mm)

MCP3426A1-E/SN

Microchip Technology

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

2

Yes

2.048 V

328 Hz

1

TS 16949

16

5 V

2's Complement Binary

Small Outline

SOP8,.23

0.05 in (1.27 mm)

125 °C (257 °F)

2.048 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

MCP3426A3-E/MS

Microchip Technology

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

8

SOP

Square

Plastic/Epoxy

2

Yes

2.048 V

328 Hz

1

TS 16949

16

5 V

2's Complement Binary

Small Outline

SOP8,.19

0.026 in (0.65 mm)

125 °C (257 °F)

2.048 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

MCP3426A4-E/SN

Microchip Technology

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

2

Yes

2.048 V

328 Hz

1

TS 16949

16

5 V

2's Complement Binary

Small Outline

SOP8,.23

0.05 in (1.27 mm)

125 °C (257 °F)

2.048 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

MCP3550-60E/MS

Microchip Technology

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

8

SOP

Square

Plastic/Epoxy

1

Yes

2.5 V

30.72 kHz

1

TS 16949

22

185 μA

0.0006 %

5 V

2's Complement Binary

2.7/5 V

Small Outline

SOP8,.19

Analog to Digital Converters

0.026 in (0.65 mm)

125 °C (257 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

67.3367 ms

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

40 s

260 °C (500 °F)

0.118 in (3 mm)

MCP3550T-50E/MS

Microchip Technology

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

8

SOP

Square

Plastic/Epoxy

1

Yes

2.5 V

25.6 kHz

1

TS 16949

22

170 μA

0.0006 %

5 V

2's Complement Binary

2.7/5 V

Small Outline

SOP8,.19

Analog to Digital Converters

0.026 in (0.65 mm)

125 °C (257 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

80.8 ms

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

40 s

260 °C (500 °F)

0.118 in (3 mm)

AD4011BCPZ-RL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

10

HVSON

Square

Plastic/Epoxy

1

Yes

5 V

500 kHz

1

18

3.8 %

1.8 V

Binary

Small Outline, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

125 °C (257 °F)

-5 V

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

320 µs

S-PDSO-N10

3

0.031 in (0.8 mm)

0.118 in (3 mm)

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD7265BSUZ-REEL

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

32

TQFP

Square

Plastic/Epoxy

3

Yes

5.25 V

1 MHz

2

12

0.0244 %

3 V

Binary, 2's Complement Binary

3/5 V

Flatpack, Thin Profile

TQFP32,.35SQ,32

Analog to Digital Converters

0.031 in (0.8 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Quad

875 ns

S-PQFP-G32

3

0.047 in (1.2 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD7403TRIZ-EP

Analog Devices

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

1

Yes

320 mV

1

CMOS

16

36 mA

0.0183 %

5 V

Binary

Small Outline

SOP16,.4

0.05 in (1.27 mm)

125 °C (257 °F)

-320 mV

Serial

-55 °C (-67 °F)

Nickel Palladium Gold

Dual

R-PDSO-G16

3

0.104 in (2.64 mm)

0.295 in (7.5 mm)

e4

30 s

260 °C (500 °F)

0.502 in (12.75 mm)

AD7866ARU-REEL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

5 V

1 MHz

1

12

0.0366 %

3 V

Binary, 2's Complement Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

800 ns

R-PDSO-G20

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e0

240 °C (464 °F)

0.256 in (6.5 mm)

AD7995ARJZ-0RL

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

4

Yes

5.5 V

1

10

0.0391 %

3.3 V

Binary

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSSOP8,.1

Analog to Digital Converters

0.026 in (0.65 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

R-PDSO-G8

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

ADS1013BQDGSRQ1

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

5.5 V

3.3 kHz

1

AEC-Q100

12

300 μA

0.0122 %

3.3 V

2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

2 V

0.02 in (0.5 mm)

125 °C (257 °F)

-256 mV

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G10

2

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

260 °C (500 °F)

0.118 in (3 mm)

ADS7042IDCUT

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

8

VSSOP

Rectangular

Plastic/Epoxy

1

Yes

3.6 V

1 MHz

1

12

230 μA

0.0244 %

3 V

Binary

1.8/3.3,3 V

Small Outline, Very Thin Profile, Shrink Pitch

TSSOP8,.12,20

Analog to Digital Converters

1.65 V

0.02 in (0.5 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold

Sample

Dual

R-PDSO-G8

1

0.035 in (0.9 mm)

0.079 in (2 mm)

No

e4

260 °C (500 °F)

0.091 in (2.3 mm)

ADS7044IDCUT

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

8

VSSOP

Rectangular

Plastic/Epoxy

1

Yes

3.6 V

1 MHz

1

12

300 μA

0.0488 %

3 V

2's Complement Binary

1.8/3.3,3 V

Small Outline, Very Thin Profile, Shrink Pitch

TSSOP8,.12,20

Analog to Digital Converters

1.65 V

0.02 in (0.5 mm)

125 °C (257 °F)

-1.65 V

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold

Sample

Dual

R-PDSO-G8

1

0.035 in (0.9 mm)

0.079 in (2 mm)

No

e4

30 s

260 °C (500 °F)

0.091 in (2.3 mm)

ADS7057IRUGR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

8

VQCCN

Square

Plastic/Epoxy

1

Yes

3.6 V

2.5 MHz

1

14

1.4 mA

0.0183 %

3.3 V

Binary

Chip Carrier, Very Thin Profile

1.65 V

0.02 in (0.5 mm)

125 °C (257 °F)

-2.35 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold Silver

Sample

Quad

S-PQCC-N8

1

0.016 in (0.4 mm)

0.059 in (1.5 mm)

e4

30 s

260 °C (500 °F)

0.059 in (1.5 mm)

ADS7854IPWR

Texas Instruments

Analog To Digital Converter, Proprietary Method

Automotive

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

5.5 V

1 MHz

1

14

10 mA

0.0122 %

5 V

Binary

Small Outline, Thin Profile, Shrink Pitch

1.65 V

0.026 in (0.65 mm)

125 °C (257 °F)

-2.4 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

450 ns

R-PDSO-G16

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS8354IPWR

Texas Instruments

Analog To Digital Converter, Proprietary Method

Automotive

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

5.5 V

700 kHz

1

16

10 mA

0.0038 %

5 V

Binary

Small Outline, Thin Profile, Shrink Pitch

1.65 V

0.026 in (0.65 mm)

125 °C (257 °F)

-2.4 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

640 ns

R-PDSO-G16

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS8671IPWR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

12.288 V

1 MHz

1

14

8.6 mA

0.0046 %

5 V

Binary

Small Outline, Thin Profile, Shrink Pitch

1.65 V

0.026 in (0.65 mm)

125 °C (257 °F)

-12.288 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

665 ns

R-PDSO-G16

3

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

AMC1303M2520DWVR

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

250 mV

78 kHz

1

16

9.8 mA

0.0061 %

5 V

Binary

Small Outline

0.05 in (1.27 mm)

125 °C (257 °F)

-250 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

3

0.11 in (2.8 mm)

0.23 in (5.85 mm)

Peak-to-peak input voltage range: 250 mV

e4

30 s

260 °C (500 °F)

0.295 in (7.5 mm)

LTC1864AHMS8

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1

Yes

5.25 V

250 kHz

1

16

0.0099 %

5 V

Binary

Small Outline, Thin Profile, Shrink Pitch

0.026 in (0.65 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin/Lead

Sample

Dual

3.3 µs

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

0.118 in (3 mm)

LTC2309HF#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

2.048 V

14 kHz

1

12

0.0244 %

5 V

Binary, 2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

0.026 in (0.65 mm)

125 °C (257 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

1.8 µs

R-PDSO-G20

1

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.256 in (6.5 mm)

LTC2320HUKG-14#TRPBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

52

HVQCCN

Rectangular

Plastic/Epoxy

8

Yes

2.064 V

1.5 MHz

1

CMOS

14

0.0183 %

3.3 V

2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

125 °C (257 °F)

-2.034 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Quad

450 ns

R-PQCC-N52

1

0.031 in (0.8 mm)

0.276 in (7 mm)

e3

260 °C (500 °F)

0.315 in (8 mm)

LTC2348HLX-18#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

8

Yes

12.5 V

200 kHz

1

CMOS

18

0.0015 %

15 V

Binary

-15 V

Flatpack, Low Profile, Fine Pitch

0.02 in (0.5 mm)

125 °C (257 °F)

-12.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Quad

550 ns

S-PQFP-G48

3

0.063 in (1.6 mm)

0.276 in (7 mm)

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

LTC2360HS6#TRPBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

6

VSSOP

Rectangular

Plastic/Epoxy

1

Yes

3.65 V

100 kHz

1

CMOS

12

0.0244 %

3 V

Binary

Small Outline, Very Thin Profile, Shrink Pitch

0.037 in (0.95 mm)

125 °C (257 °F)

-50 mV

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

R-PDSO-G6

1

0.039 in (1 mm)

0.064 in (1.625 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

MCP3422A1-E/MS

Microchip Technology

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

8

SOP

Square

Plastic/Epoxy

2

Yes

2.048 V

2.4 kHz

1

TS 16949

18

180 μA

0.0035 %

5 V

2's Complement Binary

3/5 V

Small Outline

SOP8,.19

Analog to Digital Converters

0.026 in (0.65 mm)

125 °C (257 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

40 s

260 °C (500 °F)

0.118 in (3 mm)

MCP3422A5-E/MS

Microchip Technology

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

8

SOP

Square

Plastic/Epoxy

2

Yes

2.048 V

2.4 kHz

1

TS 16949

18

180 μA

0.0035 %

5 V

2's Complement Binary

3/5 V

Small Outline

SOP8,.19

Analog to Digital Converters

0.026 in (0.65 mm)

125 °C (257 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

40 s

260 °C (500 °F)

0.118 in (3 mm)

MCP3426A6-E/SN

Microchip Technology

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

2

Yes

2.048 V

328 Hz

1

TS 16949

16

5 V

2's Complement Binary

Small Outline

SOP8,.23

0.05 in (1.27 mm)

125 °C (257 °F)

2.048 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

Analog-to-Digital Converters

Analog-to-digital converters (ADCs) are electronic devices that convert continuous analog signals into digital signals, which can be processed by digital circuits, microcontrollers, or computers. ADCs are essential components in many electronic systems, as they allow the measurement and processing of physical signals, such as temperature, pressure, light, and sound.

ADCs work by sampling the analog signal at regular intervals and quantizing the sampled signal into a series of digital values. The sampling rate and the resolution of the ADC determine the accuracy and the bandwidth of the digital signal. ADCs may also include features such as amplification, filtering, or signal conditioning, to improve the accuracy and stability of the digital signal.

ADCs can be classified based on their architecture and their application. The most common types of ADCs are successive approximation ADCs, delta-sigma ADCs, and pipeline ADCs. Each type has its advantages and limitations, depending on the application and the required performance.

ADCs are used in a wide range of applications, from consumer electronics, such as smartphones and digital cameras, to industrial automation, medical devices, and scientific instruments. They play a crucial role in the conversion of physical signals into digital signals, allowing the processing, storage, and transmission of data in electronic systems.

Overall, ADCs are essential components in many electronic systems, providing the necessary signal conversion for a wide range of applications. Their accuracy, speed, and resolution determine the performance and the functionality of many electronic devices and systems.