Industrial Analog-to-Digital Converters 2,400+

Reset All
Part RoHS Manufacturer Converter Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material No. of Analog In Channels Surface Mount Maximum Supply Voltage Maximum Analog Input Voltage Sample Rate No. of Functions Technology Screening Level Nominal Bandwidth No. of Bits Maximum Supply Current Maximum Linearity Error (EL) Nominal Supply Voltage Output Bit Code Power Supplies (V) Nominal Negative Supply Voltage Package Style (Meter) Package Equivalence Code Sub-Category Minimum Supply Voltage Terminal Pitch Maximum Operating Temperature Minimum Analog Input Voltage Output Format Minimum Operating Temperature Terminal Finish Sample and Hold/Track and Hold Terminal Position Maximum Conversion Time JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Additional Features JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length Input Bit Code

AD7171BCPZ-500RL7

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

No Lead

10

HVSON

Square

Plastic/Epoxy

1

Yes

5 V

125 kHz

1

CMOS

16

3 V

Offset Binary

3/5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC10,.12,20

Analog to Digital Converters

0.02 in (0.5 mm)

105 °C (221 °F)

-5 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-N10

3

0.033 in (0.85 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD7680BRJZ-R2

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.5 V

100 kHz

1

16

0.0053 %

3.6 V

Binary

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

0.037 in (0.95 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Track

Dual

9.6 µs

R-PDSO-G6

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e3

260 °C (500 °F)

0.114 in (2.9 mm)

AD7738BRUZ-REEL7

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

28

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

2.9 V

1

24

0.0015 %

5 V

Binary

Small Outline, Thin Profile, Shrink Pitch

0.026 in (0.65 mm)

105 °C (221 °F)

-2.9 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G28

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.382 in (9.7 mm)

AD7856ARZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

24

SOP

Rectangular

Plastic/Epoxy

8

Yes

5.25 V

285 kHz

1

CMOS

14

5 V

Binary

5 V

Small Outline

SOP24,.4

Analog to Digital Converters

0.05 in (1.27 mm)

105 °C (221 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

3.5 µs

R-PDSO-G24

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e3

260 °C (500 °F)

0.606 in (15.4 mm)

AD7874BNZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Through-Hole

28

DIP

Rectangular

Plastic/Epoxy

4

No

10 V

29 kHz

1

BICMOS

12

18 mA

0.012 %

5 V

2's Complement Binary

±5 V

-5 V

In-Line

DIP28,.6

Analog to Digital Converters

0.1 in (2.54 mm)

85 °C (185 °F)

-10 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Track

Dual

35 µs

R-PDIP-T28

0.25 in (6.35 mm)

0.6 in (15.24 mm)

No

e3

1.472 in (37.4 mm)

AD9204BCPZ-40

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

No Lead

64

HVQCCN

Rectangular

2

Yes

2 V

40 MHz

1

CMOS

10

0.0586 %

1.8 V

Offset Binary, 2's Complement Binary, Gray Code

1.8 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC64,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-2 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Quad

25 ns

R-XQCC-N64

3

0.039 in (1 mm)

0.354 in (9 mm)

No

e3

0.354 in (9 mm)

AD9238BCPZ-20

Analog Devices

Analog To Digital Converter, Flash Method

Industrial

No Lead

64

HVQCCN

Square

2

Yes

2 V

20 MHz

1

CMOS

12

0.0342 %

3 V

Offset Binary, 2's Complement Binary

2.5,3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC64,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

1 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

S-XQCC-N64

3

0.039 in (1 mm)

0.354 in (9 mm)

No

e3

30 s

260 °C (500 °F)

0.354 in (9 mm)

AD9238BSTZRL-65

Analog Devices

Analog To Digital Converter, Flash Method

Industrial

Gull Wing

64

LFQFP

Square

Plastic/Epoxy

2

Yes

2 V

65 MHz

1

CMOS

12

0.0427 %

3 V

Offset Binary, 2's Complement Binary

2.5,3 V

Flatpack, Low Profile, Fine Pitch

QFP64,.35SQ,16

Analog to Digital Converters

0.016 in (0.4 mm)

85 °C (185 °F)

1 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

S-PQFP-G64

3

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

ADC08060CIMTX/NOPB

Texas Instruments

Analog To Digital Converter, Resistance Ladder

Industrial

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

1.6 V

60 MHz

1

CMOS

8

31 mA

0.5078 %

3 V

Binary

3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP24,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-1.6 V

Parallel, 8 Bits

-40 °C (-40 °F)

Matte Tin

Sample

Dual

14.2 ns

R-PDSO-G24

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

Peak-to-peak input voltage range: 1.6 V

e3

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

ADC0808CCV/NOPB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

J Bend

28

QCCJ

Square

Plastic/Epoxy

8

Yes

6 V

10 kHz

1

CMOS

8

3 mA

0.293 %

5 V

Binary

5 V

Chip Carrier

LDCC28,.5SQ

Analog to Digital Converters

4.5 V

0.05 in (1.27 mm)

85 °C (185 °F)

-100 mV

Parallel, 8 Bits

-40 °C (-40 °F)

Matte Tin

Sample

Quad

116 µs

S-PQCC-J28

2A

0.18 in (4.57 mm)

0.453 in (11.505 mm)

No

e3

30 s

245 °C (473 °F)

0.453 in (11.505 mm)

ADC101S021CIMF/NOPB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.25 V

200 kHz

1

CMOS

10

2.4 mA

0.0684 %

3 V

Binary

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

2.7 V

0.037 in (0.95 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

R-PDSO-G6

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e3

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

ADC3683IRSBR

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

No Lead

40

HVQCCN

Square

Plastic/Epoxy

2

Yes

3.2 V

65 MHz

1

18

0.002670288 %

1.8 V

2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC40,.20SQ,16

0.016 in (0.4 mm)

105 °C (221 °F)

-3.2 V

Serial, Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

S-PQCC-N40

3

0.031 in (0.8 mm)

0.197 in (5 mm)

Peak-to-peak input voltage range: 3.2 V

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS5407IZAY

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Ball

196

LFBGA

Square

Plastic/Epoxy

2

Yes

1 V

500 MHz

1

12

270 mA

0.1221 %

1.8 V

Offset Binary, 2's Complement Binary

1.8,3.3 V

Grid Array, Low Profile, Fine Pitch

BGA196,14X14,32

Analog to Digital Converters

0.031 in (0.8 mm)

85 °C (185 °F)

-1 V

Parallel, Word

-40 °C (-40 °F)

Tin Silver Copper

Track

Bottom

S-PBGA-B196

3

0.055 in (1.4 mm)

0.472 in (12 mm)

No

Peak-to-peak input voltage range: 1 V

e1

30 s

260 °C (500 °F)

0.472 in (12 mm)

ADS5560IRGZT

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

No Lead

48

HVQCCN

Square

Plastic/Epoxy

1

Yes

3.6 V

40 MHz

1

16

250 mA

0.013 %

3.3 V

Offset Binary, 2's Complement Binary

3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC48,.27SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-3.6 V

Serial, Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

S-PQCC-N48

3

0.039 in (1 mm)

0.276 in (7 mm)

No

Peak-to-peak input voltage range: 3.6 V

e4

30 s

260 °C (500 °F)

0.276 in (7 mm)

ADS6123IRHBRG4

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

No Lead

32

HVQCCN

Square

Plastic/Epoxy

1

Yes

2 V

80 MHz

1

CMOS

12

0.0488 %

3.3 V

Binary, Offset Binary, 2's Complement Binary

3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC32,.2SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-2 V

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

S-PQCC-N32

3

0.039 in (1 mm)

0.197 in (5 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS6143IRHBRG4

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

No Lead

32

HVQCCN

Square

Plastic/Epoxy

1

Yes

2 V

80 MHz

1

14

0.0244 %

3.3 V

Binary, Offset Binary, 2's Complement Binary

3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC32,.2SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

S-PQCC-N32

3

0.039 in (1 mm)

0.197 in (5 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS7868IDBVT

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

3.6 V

280 kHz

1

8

500 μA

0.1953 %

1.8 V

Binary

1.5,1.8/3.3 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

1.2 V

0.037 in (0.95 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

5.294 µs

R-PDSO-G6

2

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

HI7191IBZ-T

Renesas Electronics

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

1

Yes

5 V

650 kHz

1

20

0.003 %

5 V

Binary, Offset Binary, 2's Complement Binary

-5 V

Small Outline

SOP20,.4

0.05 in (1.27 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G20

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

e3

30 s

260 °C (500 °F)

0.504 in (12.8 mm)

LTC2208IUP#PBF

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

No Lead

64

HVQCCN

Square

Plastic/Epoxy

1

Yes

2.25 V

130 MHz

1

CMOS

16

0.0069 %

3.3 V

Offset Binary, 2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

S-PQCC-N64

1

0.031 in (0.8 mm)

0.354 in (9 mm)

No

e3

30 s

260 °C (500 °F)

0.354 in (9 mm)

LTC2209IUP#TRPBF

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

No Lead

64

HVQCCN

Square

Plastic/Epoxy

1

Yes

1.5 V

160 MHz

1

CMOS

16

0.0084 %

3.3 V

Offset Binary, 2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

85 °C (185 °F)

1 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

S-PQCC-N64

1

0.031 in (0.8 mm)

0.354 in (9 mm)

No

e3

30 s

260 °C (500 °F)

0.354 in (9 mm)

LTC2252IUH#PBF

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

No Lead

32

HVQCCN

Square

Plastic/Epoxy

1

Yes

1 V

105 MHz

1

CMOS

12

0.0366 %

3 V

Offset Binary, 2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

85 °C (185 °F)

-1 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

S-PQCC-N32

1

0.031 in (0.8 mm)

0.197 in (5 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

LTC2424IG

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

4

Yes

3.7125 V

1

20

3.3 V

Binary

Small Outline, Shrink Pitch

0.026 in (0.65 mm)

85 °C (185 °F)

-412.5 mV

Serial

-40 °C (-40 °F)

Tin Lead

Dual

163.44 ms

R-PDSO-G28

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e0

0.402 in (10.2 mm)

LTC2424IG#TR

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

4

Yes

3.7125 V

1

20

3.3 V

Binary

Small Outline, Shrink Pitch

0.026 in (0.65 mm)

85 °C (185 °F)

-412.5 mV

Serial

-40 °C (-40 °F)

Tin Lead

Dual

163.44 ms

R-PDSO-G28

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e0

0.402 in (10.2 mm)

LTC2424IG#TRPBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

4

Yes

3.7125 V

1

20

3.3 V

Binary

Small Outline, Shrink Pitch

0.026 in (0.65 mm)

85 °C (185 °F)

-412.5 mV

Serial

-40 °C (-40 °F)

Matte Tin

Dual

163.44 ms

R-PDSO-G28

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e3

30 s

260 °C (500 °F)

0.402 in (10.2 mm)

LTC2442IG#TRPBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

36

SSOP

Rectangular

Plastic/Epoxy

4

Yes

2.75 V

1

24

5 V

Binary

Small Outline, Shrink Pitch

0.026 in (0.65 mm)

85 °C (185 °F)

-50 mV

Serial

-40 °C (-40 °F)

Matte Tin

Dual

170 ns

R-PDSO-G36

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e3

30 s

260 °C (500 °F)

0.504 in (12.8 mm)

LTC2470IDD#PBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

No Lead

12

HVSON

Square

Plastic/Epoxy

2

Yes

1.253 V

250 Hz

1

CMOS

16

0.013 %

Binary

Small Outline, Heat Sink/Slug, Very Thin Profile

0.018 in (0.45 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Dual

4.8 ms

S-PDSO-N12

1

0.031 in (0.8 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC2486IDE

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

No Lead

14

HVQCCN

Rectangular

Plastic/Epoxy

4

Yes

1

16

5 V

Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

85 °C (185 °F)

Serial

-40 °C (-40 °F)

Tin Lead

Sample

Quad

81.9 ms

R-PQCC-N14

0.031 in (0.8 mm)

0.118 in (3 mm)

No

e0

0.157 in (4 mm)

MAX1036EKA-T

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

4

Yes

2.048 V

76 kHz

1

BICMOS

8

0.3906 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Low Profile, Shrink Pitch

TSSOP8,.1

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold

Track

Dual

6.1 µs

R-PDSO-G8

1

0.057 in (1.45 mm)

0.064 in (1.625 mm)

No

e4

20 s

240 °C (464 °F)

0.114 in (2.9 mm)

MAX1036EKA+T

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

4

Yes

4.342 V

188 kHz

1

BICMOS

8

0.3906 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Low Profile, Shrink Pitch

TSSOP8,.1

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Gold Palladium

Track

Dual

6.1 µs

R-PDSO-G8

1

0.057 in (1.45 mm)

0.064 in (1.625 mm)

No

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

MAX111BEWE

Maxim Integrated

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

2

Yes

1.5 V

1.25 MHz

1

14

0.18 %

5 V

2's Complement Binary

5 V

-5 V

Small Outline

SOP16,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Dual

20 ms

R-PDSO-G16

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e0

20 s

240 °C (464 °F)

0.406 in (10.3 mm)

MAX111BEWE+

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

2

Yes

1.5 V

1

14

1.2 mA

0.18 %

5 V

2's Complement Binary

5 V

Small Outline

SOP16,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Dual

20 ms

R-PDSO-G16

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e3

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

MAX11602EEE+T

Analog Devices

Digital To Analog Converter

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

8

Yes

2.75 V

188 kHz

1

BICMOS

8

0.3906 %

5 V

2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP16,.25

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

-2.75 V

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Track

Dual

6.1 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.153 in (3.89 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

MAX1198ECM-D

Maxim Integrated

Analog To Digital Converter, Flash Method

Industrial

Gull Wing

48

TFQFP

Square

Plastic/Epoxy

2

Yes

1 V

100 MHz

1

CMOS

8

0.3906 %

3.3 V

Offset Binary, 2's Complement Binary

Flatpack, Thin Profile, Fine Pitch

0.02 in (0.5 mm)

85 °C (185 °F)

-1 V

Parallel, 8 Bits

-40 °C (-40 °F)

Tin Lead

Track

Quad

S-PQFP-G48

0.047 in (1.2 mm)

0.276 in (7 mm)

No

e0

20 s

240 °C (464 °F)

0.276 in (7 mm)

MAX1198ECM+D

Analog Devices

Analog To Digital Converter, Flash Method

Industrial

Gull Wing

48

TFQFP

Square

Plastic/Epoxy

2

Yes

1 V

100 MHz

1

CMOS

8

0.3906 %

3.3 V

Offset Binary, 2's Complement Binary

Flatpack, Thin Profile, Fine Pitch

0.02 in (0.5 mm)

85 °C (185 °F)

-1 V

Parallel, 8 Bits

-40 °C (-40 °F)

Matte Tin - annealed

Track

Quad

S-PQFP-G48

3

0.047 in (1.2 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

MAX1401EAI-T

Maxim Integrated

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

5

Yes

1.25 V

1

18

0.0015 %

3.3 V

Binary

3/3.3 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-1.25 V

Serial

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G28

1

0.078 in (1.99 mm)

0.208 in (5.29 mm)

No

e0

0.402 in (10.2 mm)

MAX1401EAI+T

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

5

Yes

1.25 V

1

18

0.0015 %

3.3 V

Binary

3/3.3 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-1.25 V

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDSO-G28

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e3

30 s

260 °C (500 °F)

0.402 in (10.2 mm)

MCP3004-I/SL

Microchip Technology

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

4

Yes

5 V

200 kHz

1

CMOS

TS 16949

10

0.0977 %

5 V

Binary

3/5 V

Small Outline

SOP14,.24

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

2.7778 µs

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

40 s

260 °C (500 °F)

0.341 in (8.65 mm)

PCM1803ADBR

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

20

SSOP

Rectangular

Plastic/Epoxy

2

Yes

3.3 V

96 kHz

1

CMOS

24

10 mA

5 V

2's Complement Binary

3.3,5 V

Small Outline, Shrink Pitch

SSOP20,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G20

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.283 in (7.2 mm)

SI8900D-A01-GS

Silicon Labs

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

3

Yes

3.6 V

1

CMOS

10

0.0977 %

3.3 V

Binary

3/3.3,3/5 V

Small Outline

SOP16,.4

Other Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Dual

R-PDSO-G16

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

0.406 in (10.3 mm)

AD7322BRUZ-REEL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

10 V

1 MHz

1

CMOS

12

0.0269 %

5 V

Binary, 2's Complement Binary

3/5,-+12/-+16.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

800 ns

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

40 s

260 °C (500 °F)

0.197 in (5 mm)

AD7352BRUZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

3 MHz

2

CMOS

12

0.0244 %

2.5 V

Binary

2.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

AD7352BRUZ-RL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

3 MHz

2

CMOS

12

0.0244 %

2.5 V

Binary

2.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

AD7612BCPZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

No Lead

48

HVQCCN

Square

1

Yes

10.1 V

750 kHz

1

CMOS

16

0.0023 %

5 V

Binary, 2's Complement Binary

5/±15 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC48,.27SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-10.1 V

Parallel, 8 Bits, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

1.45 µs

S-XQCC-N48

3

0.039 in (1 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD7679ASTZRL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

1

Yes

5.35 V

570 kHz

1

CMOS

18

0.001 %

5 V

Binary, 2's Complement Binary

3/5,5 V

Flatpack, Low Profile, Fine Pitch

QFP48,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-3 V

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

1.5 µs

S-PQFP-G48

3

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e3

260 °C (500 °F)

0.276 in (7 mm)

AD7694ARMZRL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1

Yes

5.25 V

250 kHz

1

16

0.0092 %

5 V

Binary

Small Outline, Thin Profile, Shrink Pitch

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

3.2 µs

S-PDSO-G8

1

0.043 in (1.09 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

AD7787BRMZ

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

2

Yes

5.15 V

1

24

0.006 %

3 V

Binary, Offset Binary

Small Outline, Thin Profile, Shrink Pitch

0.02 in (0.5 mm)

105 °C (221 °F)

100 mV

Serial

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD7904BRUZ-REEL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

5 V

1 MHz

1

8

2.7 mA

0.0781 %

3 V

Binary, 2's Complement Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

800 ns

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

AD9228ABCPZ-65

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

No Lead

48

HVQCCN

Square

4

Yes

2 V

65 MHz

1

CMOS

12

0.0244 %

1.8 V

Offset Binary, 2's Complement Binary

1.8 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC48,.27SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Quad

S-XQCC-N48

3

0.039 in (1 mm)

0.276 in (7 mm)

No

e3

260 °C (500 °F)

0.276 in (7 mm)

Analog-to-Digital Converters

Analog-to-digital converters (ADCs) are electronic devices that convert continuous analog signals into digital signals, which can be processed by digital circuits, microcontrollers, or computers. ADCs are essential components in many electronic systems, as they allow the measurement and processing of physical signals, such as temperature, pressure, light, and sound.

ADCs work by sampling the analog signal at regular intervals and quantizing the sampled signal into a series of digital values. The sampling rate and the resolution of the ADC determine the accuracy and the bandwidth of the digital signal. ADCs may also include features such as amplification, filtering, or signal conditioning, to improve the accuracy and stability of the digital signal.

ADCs can be classified based on their architecture and their application. The most common types of ADCs are successive approximation ADCs, delta-sigma ADCs, and pipeline ADCs. Each type has its advantages and limitations, depending on the application and the required performance.

ADCs are used in a wide range of applications, from consumer electronics, such as smartphones and digital cameras, to industrial automation, medical devices, and scientific instruments. They play a crucial role in the conversion of physical signals into digital signals, allowing the processing, storage, and transmission of data in electronic systems.

Overall, ADCs are essential components in many electronic systems, providing the necessary signal conversion for a wide range of applications. Their accuracy, speed, and resolution determine the performance and the functionality of many electronic devices and systems.