Industrial Analog-to-Digital Converters 2,400+

Reset All
Part RoHS Manufacturer Converter Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material No. of Analog In Channels Surface Mount Maximum Supply Voltage Maximum Analog Input Voltage Sample Rate No. of Functions Technology Screening Level Nominal Bandwidth No. of Bits Maximum Supply Current Maximum Linearity Error (EL) Nominal Supply Voltage Output Bit Code Power Supplies (V) Nominal Negative Supply Voltage Package Style (Meter) Package Equivalence Code Sub-Category Minimum Supply Voltage Terminal Pitch Maximum Operating Temperature Minimum Analog Input Voltage Output Format Minimum Operating Temperature Terminal Finish Sample and Hold/Track and Hold Terminal Position Maximum Conversion Time JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Additional Features JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length Input Bit Code

AD7655ACPZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

No Lead

48

HVQCCN

Square

4

Yes

5 V

1 MHz

1

16

0.0092 %

5 V

Binary

3/5,5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC48,.27SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial, Parallel, 8 Bits, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

1.25 µs

S-XQCC-N48

3

0.039 in (1 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD7655ACPZRL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

No Lead

48

HVQCCN

Square

4

Yes

5 V

1 MHz

1

16

0.0092 %

5 V

Binary

3/5,5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC48,.27SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial, Parallel, 8 Bits, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

1.25 µs

S-XQCC-N48

3

0.039 in (1 mm)

0.276 in (7 mm)

No

e3

260 °C (500 °F)

0.276 in (7 mm)

AD7690BRMZ-RL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

5.25 V

400 kHz

1

CMOS

18

0.0006 %

5 V

2's Complement Binary

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-5.25 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

2 µs

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

AD7705BNZ

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Through-Hole

16

DIP

Rectangular

Plastic/Epoxy

2

No

2.5 V

19.2 kHz

1

CMOS

16

0.003 %

3 V

Binary, Offset Binary

3/5 V

In-Line

DIP16,.3

Other Converters

0.1 in (2.54 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDIP-T16

0.21 in (5.33 mm)

0.3 in (7.62 mm)

No

e3

0.79 in (20.07 mm)

AD7715ARZ-5REEL

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

1

Yes

2.5 V

1

CMOS

16

0.0015 %

5 V

Binary, Offset Binary

3/5,5 V

Small Outline

SOP16,.4

Other Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G16

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e3

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

AD7894ARZ-3REEL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

2.5 V

11 kHz

1

CMOS

14

0.0122 %

5 V

2's Complement Binary

5 V

Small Outline

SOP8,.25

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

5 µs

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD7894BRZ-3

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

2.5 V

11 kHz

1

CMOS

14

0.0092 %

5 V

2's Complement Binary

5 V

Small Outline

SOP8,.25

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

5 µs

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

AD7914BRUZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

5 V

1 MHz

1

10

2.7 mA

0.0488 %

3 V

Binary, 2's Complement Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

800 ns

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

AD9684BBPZRL7-500

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

Ball

196

LFBGA

Square

Plastic/Epoxy

2

Yes

2.06 V

1250 MHz

1

14

0.0305 %

1.25 V

Offset Binary, 2's Complement Binary, Gray Code

Grid Array, Low Profile, Fine Pitch

0.031 in (0.8 mm)

85 °C (185 °F)

-2.06 V

Serial, Parallel, Word

-40 °C (-40 °F)

Sample

Bottom

S-PBGA-B196

3

0.059 in (1.49 mm)

0.472 in (12 mm)

30 s

260 °C (500 °F)

0.472 in (12 mm)

AD977ARZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

3

Yes

10 V

100 kHz

1

BICMOS

16

0.0046 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline

SOP20,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

8 µs

R-PDSO-G20

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e3

30 s

260 °C (500 °F)

0.504 in (12.8 mm)

ADC0804LCJ

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Through-Hole

20

DIP

Rectangular

Ceramic, Glass-Sealed

1

No

6.35 V

1

CMOS

8

0.3906 %

5 V

Binary

In-Line

85 °C (185 °F)

-50 mV

Parallel, 8 Bits

-40 °C (-40 °F)

Dual

114 µs

R-GDIP-T20

ADC122S101CIMM/NOPB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

5.25 V

1 MHz

1

CMOS

12

3 mA

0.0391 %

3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

1.625 µs

R-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADC12D1000CIUT

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Ball

292

HBGA

Square

Plastic/Epoxy

2

Yes

800 mV

1000 MHz

1

12

0.1172 %

1.9 V

Offset Binary, 2's Complement Binary

1.9 V

Grid Array, Heat Sink/Slug

BGA292,20X20,50

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-800 mV

Parallel, Word

-40 °C (-40 °F)

Tin Lead

Track

Bottom

S-PBGA-B292

3

0.102 in (2.58 mm)

1.063 in (27 mm)

No

Peak-to-peak input voltage range: 0.8 V

e0

20 s

220 °C (428 °F)

1.063 in (27 mm)

ADS1250U/1K

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

1

Yes

4.196 V

25 kHz

1

CMOS

20

0.002 %

5 V

2's Complement Binary

5 V

Small Outline

SOP16,.4

Analog to Digital Converters

4.75 V

0.05 in (1.27 mm)

85 °C (185 °F)

-4.096 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

R-PDSO-G16

2

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

ADS1250U/1KG4

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

1

Yes

4.096 V

25 kHz

1

20

0.002 %

5 V

2's Complement Binary

5 V

Small Outline

SOP16,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-4.096 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

R-PDSO-G16

2

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.406 in (10.3 mm)

ADS1282IPWG4

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

28

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

2.5 V

1

24

6.5 mA

0.0004 %

2.5 V

Offset Binary, 2's Complement Binary

±2.5,3.3 V

-2.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP28,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G28

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.382 in (9.7 mm)

ADS1284IRHFR

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

No Lead

24

HQCCN

Rectangular

Plastic/Epoxy

2

Yes

5 V

4 kHz

1

31

2.5 V

Binary

-2.5 V

Chip Carrier, Heat Sink/Slug

1.65 V

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold

Quad

R-PQCC-N24

3

0.039 in (1 mm)

0.157 in (4 mm)

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS5562IRGZR

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

No Lead

48

HVQCCN

Square

Plastic/Epoxy

1

Yes

3.6 V

80 MHz

1

16

250 mA

0.013 %

3.3 V

Offset Binary, 2's Complement Binary

3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC48,.27SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-3.6 V

Serial, Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

S-PQCC-N48

3

0.039 in (1 mm)

0.276 in (7 mm)

No

Peak-to-peak input voltage range: 3.6 V

e4

30 s

260 °C (500 °F)

0.276 in (7 mm)

ADS5562IRGZRG4

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

No Lead

48

HVQCCN

Square

Plastic/Epoxy

1

Yes

3.56 V

80 MHz

1

16

0.013 %

3.3 V

Offset Binary, 2's Complement Binary

3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC48,.27SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial, Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

S-PQCC-N48

3

0.039 in (1 mm)

0.276 in (7 mm)

No

e4

30 s

260 °C (500 °F)

0.276 in (7 mm)

ADS6445IRGCT

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

No Lead

64

HVQCCN

Square

Plastic/Epoxy

4

Yes

2 V

125 MHz

1

CMOS

14

0.0305 %

3.3 V

Binary, Offset Binary, 2's Complement Binary

3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC64,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-2 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

S-PQCC-N64

3

0.039 in (1 mm)

0.354 in (9 mm)

No

Peak-to-peak input voltage range: 2 V

e4

30 s

260 °C (500 °F)

0.354 in (9 mm)

ADS7818EB/2K5

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SSOP

Square

Plastic/Epoxy

1

Yes

5.25 V

500 kHz

1

CMOS

12

0.0244 %

5 V

Binary

5 V

Small Outline, Shrink Pitch

TSSOP8,.19

Analog to Digital Converters

4.75 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold Silver

Sample

Dual

R-PDSO-G8

2

0.069 in (1.75 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADS7818EB/2K5G4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SSOP

Square

Plastic/Epoxy

1

Yes

5.25 V

500 kHz

1

CMOS

12

0.0244 %

5 V

Binary

5 V

Small Outline, Shrink Pitch

TSSOP8,.19

Analog to Digital Converters

4.75 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold Silver

Sample

Dual

R-PDSO-G8

2

0.069 in (1.75 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADS831E/2K5G4

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

20

SSOP

Rectangular

Plastic/Epoxy

1

Yes

3.5 V

80 MHz

1

CMOS

8

0.3906 %

5 V

Offset Binary

5 V

Small Outline, Shrink Pitch

SSOP20,.25

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

1.5 V

Parallel, 8 Bits

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

100 µs

R-PDSO-G20

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

ADS8329IPWR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.5 V

1 MHz

1

CMOS

16

6.1 mA

0.0038 %

5 V

Binary

3.3,5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

1.65 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

786 ns

R-PDSO-G16

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS8508IBDWRG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

3

Yes

10 V

250 kHz

1

CMOS

12

0.011 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline

SOP20,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

4 µs

R-PDSO-G20

2

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.504 in (12.8 mm)

CS5522-ASZ

Cirrus Logic

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

20

SSOP

Rectangular

Plastic/Epoxy

2

Yes

5.25 V

1

CMOS

24

0.0015 %

5 V

Offset Binary, 2's Complement Binary

3.3/5,5 V

Small Outline, Shrink Pitch

SSOP20,.3

Other Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-1.8 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G20

3

0.084 in (2.13 mm)

0.209 in (5.3 mm)

No

e3

260 °C (500 °F)

0.283 in (7.2 mm)

LTC1605AISW#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

10 V

100 kHz

1

16

0.0031 %

5 V

2's Complement Binary

Small Outline

0.05 in (1.27 mm)

85 °C (185 °F)

-10 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Dual

8 µs

R-PDSO-G28

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e3

30 s

260 °C (500 °F)

0.705 in (17.9 mm)

LTC2412IGN

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

2

Yes

2.75 V

1

24

5.5 V

Binary

Small Outline, Shrink Pitch

0.025 in (0.635 mm)

85 °C (185 °F)

-2.75 V

Serial

-40 °C (-40 °F)

Tin Lead

Dual

163.44 ms

R-PDSO-G16

1

0.068 in (1.727 mm)

0.154 in (3.899 mm)

No

e0

0.193 in (4.8895 mm)

LTC2412IGN#TR

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

2

Yes

2.75 V

1

24

5.5 V

Binary

Small Outline, Shrink Pitch

0.025 in (0.635 mm)

85 °C (185 °F)

-2.75 V

Serial

-40 °C (-40 °F)

Tin Lead

Dual

163.44 ms

R-PDSO-G16

1

0.068 in (1.727 mm)

0.154 in (3.899 mm)

No

e0

0.193 in (4.8895 mm)

MAX1168BEEG

Maxim Integrated

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

24

SSOP

Rectangular

Plastic/Epoxy

8

Yes

5.05 V

200 kHz

1

BICMOS

16

0.0046 %

5 V

Binary

3/5,5 V

Small Outline, Shrink Pitch

SSOP24,.24

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

7.07 µs

R-PDSO-G24

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.341 in (8.65 mm)

MAX1168BEEG+

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

24

SSOP

Rectangular

Plastic/Epoxy

8

Yes

5.05 V

200 kHz

1

BICMOS

16

0.0046 %

5 V

Binary

3/5,5 V

Small Outline, Shrink Pitch

SSOP24,.24

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Track

Dual

7.07 µs

R-PDSO-G24

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

MAX1363EUB

Maxim Integrated

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

4

Yes

1.034 V

133 kHz

1

12

0.0244 %

3.3 V

Binary, 2's Complement Binary

3/3.3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-1.0135 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

7.5 µs

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

245 °C (473 °F)

0.118 in (3 mm)

MAX1363EUB+

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

4

Yes

1.034 V

133 kHz

1

12

0.0244 %

3.3 V

Binary, 2's Complement Binary

3/3.3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-1.0135 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

7.5 µs

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

MAX139EPL

Maxim Integrated

Analog To Digital Converter, Dual-Slope

Industrial

Through-Hole

40

DIP

Rectangular

Plastic/Epoxy

1

No

200 mV

1

CMOS

24

0.0015 %

5 V

Binary

5 V

In-Line

DIP40,.6

Analog to Digital Converters

0.1 in (2.54 mm)

85 °C (185 °F)

Parallel, Word

-40 °C (-40 °F)

Tin Lead

Dual

R-PDIP-T40

1

0.2 in (5.08 mm)

0.6 in (15.24 mm)

No

e0

245 °C (473 °F)

2.05 in (52.075 mm)

MAX139EPL+

Analog Devices

Analog To Digital Converter, Dual-Slope

Industrial

Through-Hole

40

DIP

Rectangular

Plastic/Epoxy

1

No

200 mV

1

CMOS

24

0.0015 %

5 V

Binary

5 V

In-Line

DIP40,.6

Analog to Digital Converters

0.1 in (2.54 mm)

85 °C (185 °F)

Parallel, Word

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDIP-T40

1

0.2 in (5.08 mm)

0.6 in (15.24 mm)

No

e3

30 s

260 °C (500 °F)

2.05 in (52.07 mm)

MAX139EQH-D

Maxim Integrated

Analog To Digital Converter, Dual-Slope

Industrial

J Bend

44

QCCJ

Square

Plastic/Epoxy

1

Yes

200 mV

1

CMOS

24

0.05 %

5 V

Binary

5 V

Chip Carrier

LDCC44,.7SQ

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

Parallel, Word

-40 °C (-40 °F)

Tin Lead

Quad

S-PQCC-J44

1

0.18 in (4.57 mm)

0.653 in (16.585 mm)

No

e0

0.653 in (16.585 mm)

MAX139EQH+D

Analog Devices

Analog To Digital Converter, Dual-Slope

Industrial

J Bend

44

QCCJ

Square

Plastic/Epoxy

1

Yes

200 mV

1

CMOS

24

0.05 %

5 V

Binary

5 V

Chip Carrier

LDCC44,.7SQ

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

Parallel, Word

-40 °C (-40 °F)

Matte Tin - annealed

Quad

S-PQCC-J44

3

0.18 in (4.57 mm)

0.653 in (16.585 mm)

No

e3

245 °C (473 °F)

0.653 in (16.585 mm)

MCP3301-BI/MS

Microchip Technology

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SOP

Square

Plastic/Epoxy

2

Yes

5 V

100 kHz

1

TS 16949

13

450 μA

0.012207 %

5 V

2's Complement Binary

Small Outline

SOP8,.19

0.026 in (0.65 mm)

85 °C (185 °F)

-5 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

40 s

260 °C (500 °F)

0.118 in (3 mm)

MCP3903T-I/SS

Microchip Technology

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

6

Yes

1 V

64 kHz

1

TS 16949

24

5 V

Binary

3/3.3,5 V

Small Outline, Shrink Pitch

SSOP28,.3

Other Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-1 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G28

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e3

260 °C (500 °F)

0.402 in (10.2 mm)

TLC2543IDBR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

SSOP

Rectangular

Plastic/Epoxy

11

Yes

5.5 V

66 kHz

1

CMOS

12

2.5 mA

0.0244 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP20,.3

Analog to Digital Converters

4.5 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

10 µs

R-PDSO-G20

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.283 in (7.2 mm)

TLC2551IDGKG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1

Yes

5.5 V

360 kHz

1

CMOS

12

0.0244 %

5 V

Binary

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Sample

Dual

2.77 µs

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

30 s

260 °C (500 °F)

0.118 in (3 mm)

TLC4541IDR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

5.5 V

200 kHz

1

CMOS

16

0.0038 %

5 V

Binary

5 V

Small Outline

SOP8,.25

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Sample

Dual

2.94 µs

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

0.193 in (4.9 mm)

TLV1544IPWR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

5.5 V

87 kHz

1

CMOS

10

1.5 mA

0.0977 %

2.7 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold

Sample

Dual

25 µs

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

AD674BAD

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Through-Hole

28

DIP

Rectangular

Ceramic, Metal-Sealed Cofired

1

No

10 V

1

BICMOS

12

0.0244 %

12 V

Binary

5,±12/±15 V

-12 V

In-Line

DIP28,.6

Analog to Digital Converters

0.1 in (2.54 mm)

85 °C (185 °F)

-10 V

Parallel, Word

-40 °C (-40 °F)

Tin Lead

Dual

15 µs

R-CDIP-T28

0.145 in (3.68 mm)

0.6 in (15.24 mm)

No

e0

1.41 in (35.815 mm)

AD7468BRTZ-REEL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

3.6 V

100 kHz

1

CMOS

8

0.07813 %

1.8 V

Binary

1.8/3.3 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

0.037 in (0.95 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

4.7 µs

R-PDSO-G6

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

AD7622BSTZRL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

1

Yes

2.5 V

2 MHz

1

16

0.0023 %

2.5 V

Binary, 2's Complement Binary

2.5 V

Flatpack, Low Profile, Fine Pitch

QFP48,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-2.5 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

485 ns

S-PQFP-G48

3

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD7650ASTZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

1

Yes

2.5 V

570 kHz

1

CMOS

16

0.0092 %

5 V

Binary, 2's Complement Binary

3/5,5 V

Flatpack, Low Profile, Fine Pitch

QFP48,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

2 µs

S-PQFP-G48

3

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD7680BRJZ-REEL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.5 V

100 kHz

1

16

0.0053 %

3 V

Binary

Small Outline, Low Profile, Shrink Pitch

0.037 in (0.95 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

9.6 µs

R-PDSO-G6

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e3

260 °C (500 °F)

0.114 in (2.9 mm)

Analog-to-Digital Converters

Analog-to-digital converters (ADCs) are electronic devices that convert continuous analog signals into digital signals, which can be processed by digital circuits, microcontrollers, or computers. ADCs are essential components in many electronic systems, as they allow the measurement and processing of physical signals, such as temperature, pressure, light, and sound.

ADCs work by sampling the analog signal at regular intervals and quantizing the sampled signal into a series of digital values. The sampling rate and the resolution of the ADC determine the accuracy and the bandwidth of the digital signal. ADCs may also include features such as amplification, filtering, or signal conditioning, to improve the accuracy and stability of the digital signal.

ADCs can be classified based on their architecture and their application. The most common types of ADCs are successive approximation ADCs, delta-sigma ADCs, and pipeline ADCs. Each type has its advantages and limitations, depending on the application and the required performance.

ADCs are used in a wide range of applications, from consumer electronics, such as smartphones and digital cameras, to industrial automation, medical devices, and scientific instruments. They play a crucial role in the conversion of physical signals into digital signals, allowing the processing, storage, and transmission of data in electronic systems.

Overall, ADCs are essential components in many electronic systems, providing the necessary signal conversion for a wide range of applications. Their accuracy, speed, and resolution determine the performance and the functionality of many electronic devices and systems.