Part | RoHS | Manufacturer | Converter Type | Temperature Grade | Terminal Form | No. of Terminals | Package Code | Package Shape | Package Body Material | Surface Mount | Nominal Temperature Coefficient | No. of Functions | Technology | Screening Level | Nominal Bandwidth | Control Interface | Resistance Law | Nominal Total Resistance | Maximum Supply Current | Maximum Resistor Terminal Voltage | Maximum Linearity Error (EL) | Nominal Supply Voltage | Power Supplies (V) | Nominal Negative Supply Voltage | Package Style (Meter) | Package Equivalence Code | Sub-Category | Terminal Pitch | Maximum Operating Temperature | Minimum Operating Temperature | Terminal Finish | Terminal Position | Minimum Resistor Terminal Voltage | JESD-30 Code | Moisture Sensitivity Level (MSL) | Maximum Seated Height | Maximum Resistance Tolerance | Width | Qualification | No. of Positions | Additional Features | JESD-609 Code | Maximum Time At Peak Reflow Temperature (s) | Peak Reflow Temperature (C) | Length | Input Bit Code |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Maxim Integrated |
Digital Potentiometer |
Industrial |
No Lead |
16 |
HVQCCN |
Square |
Yes |
35 ppm/°C |
1 |
BICMOS |
250 Hz |
Increment/Decrement |
Linear |
10 KΩ |
5 V |
3/5 V |
0 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.12SQ,20 |
Digital Potentiometers |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Quad |
S-XQCC-N16 |
1 |
0.031 in (0.8 mm) |
0.118 in (3 mm) |
No |
1024 |
Nonvolatile memory; it can also operate with 2.5 V dual supply |
e0 |
245 °C (473 °F) |
0.118 in (3 mm) |
|||||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
No Lead |
16 |
HVQCCN |
Square |
Yes |
35 ppm/°C |
1 |
BICMOS |
250 Hz |
Increment/Decrement |
Linear |
10 KΩ |
5 V |
3/5 V |
0 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.12SQ,20 |
Digital Potentiometers |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Quad |
S-XQCC-N16 |
1 |
0.031 in (0.8 mm) |
0.118 in (3 mm) |
No |
1024 |
Nonvolatile memory; it can also operate with 2.5 V dual supply |
e3 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
|||||||||
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
35 ppm/°C |
2 |
130 Hz |
3-Wire Serial |
Linear |
50 KΩ |
5 V |
5 V |
5/15/±5 V |
-5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP16,.25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
-5 V |
R-PDSO-G16 |
1 |
0.047 in (1.2 mm) |
30 % |
0.173 in (4.4 mm) |
No |
256 |
It can also operate from a single 4.5 V to 16.5 V supply; also requires a +2.7 V to +5.5 V logic supply |
e0 |
240 °C (464 °F) |
0.197 in (5 mm) |
||||||||
|
Microchip Technology |
Digital Potentiometer |
Automotive |
No Lead |
16 |
HVQCCN |
Square |
Plastic/Epoxy |
Yes |
150 ppm/°C |
1 |
CMOS |
1 kHz |
Increment/Decrement |
Linear |
10 KΩ |
1 mA |
5 V |
5 V |
1.8/5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.16SQ,25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin |
Quad |
0 V |
S-PQCC-N16 |
1 |
0.039 in (1 mm) |
20 % |
0.157 in (4 mm) |
No |
257 |
e3 |
260 °C (500 °F) |
0.157 in (4 mm) |
|||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
30 ppm/°C |
2 |
150 Hz |
2-Wire Serial |
Linear |
50 KΩ |
5 V |
5 V |
5/15/±5 V |
-5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP16,.25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
-5 V |
R-PDSO-G16 |
1 |
0.047 in (1.2 mm) |
30 % |
0.173 in (4.4 mm) |
No |
256 |
Can also operate from a single +5 V to +15 V supply; also requires a +2.7 V to +5.5 V logic supply |
e3 |
30 s |
260 °C (500 °F) |
0.197 in (5 mm) |
||||||
|
Analog Devices |
Digital Potentiometer |
Automotive |
No Lead |
16 |
HVQCCN |
Square |
Plastic/Epoxy |
Yes |
35 ppm/°C |
4 |
430 Hz |
Increment/Decrement |
Linear |
100 KΩ |
2.75 V |
2.5 V |
±2.25/±2.75/2.3/5.5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.12SQ,20 |
Digital Potentiometers |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin |
Quad |
-2.25 V |
S-XQCC-N16 |
3 |
0.031 in (0.8 mm) |
8 % |
0.118 in (3 mm) |
No |
256 |
e3 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
750 ppm/°C |
2 |
CMOS |
5 kHz |
2-Wire Serial |
Logarithmic |
45 KΩ |
5 V |
5 V |
5,±5/±6 V |
-5 V |
Small Outline |
SOP16,.25 |
Digital Potentiometers |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
-5 V |
R-PDSO-G16 |
1 |
0.069 in (1.75 mm) |
20 % |
0.154 in (3.9 mm) |
No |
64 |
e3 |
30 s |
260 °C (500 °F) |
0.39 in (9.9 mm) |
||||||
|
Renesas Electronics |
Digital Potentiometer |
Automotive |
No Lead |
16 |
HVQCCN |
Square |
Plastic/Epoxy |
Yes |
45 ppm/°C |
2 |
CMOS |
250 Hz |
2-Wire Serial |
Linear |
50 KΩ |
5.5 V |
3.3 V |
2.5/5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.16SQ,20 |
Digital Potentiometers |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin |
Quad |
-2.25 V |
S-PQCC-N16 |
1 |
0.039 in (1 mm) |
20 % |
0.157 in (4 mm) |
No |
256 |
e3 |
30 s |
260 °C (500 °F) |
0.157 in (4 mm) |
|||||||
|
Microchip Technology |
Digital Potentiometer |
Automotive |
No Lead |
16 |
HVQCCN |
Square |
Plastic/Epoxy |
Yes |
150 ppm/°C |
1 |
CMOS |
100 Hz |
Increment/Decrement |
Linear |
100 KΩ |
1 mA |
5 V |
5 V |
1.8/5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.16SQ,25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin |
Quad |
0 V |
S-PQCC-N16 |
1 |
0.039 in (1 mm) |
20 % |
0.157 in (4 mm) |
No |
257 |
e3 |
40 s |
260 °C (500 °F) |
0.157 in (4 mm) |
||||||
|
Microchip Technology |
Digital Potentiometer |
Automotive |
No Lead |
16 |
HVQCCN |
Square |
Plastic/Epoxy |
Yes |
150 ppm/°C |
1 |
CMOS |
1 kHz |
Increment/Decrement |
Linear |
10 KΩ |
1 mA |
5 V |
5 V |
1.8/5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.16SQ,25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin |
Quad |
0 V |
S-PQCC-N16 |
1 |
0.039 in (1 mm) |
20 % |
0.157 in (4 mm) |
No |
257 |
e3 |
40 s |
260 °C (500 °F) |
0.157 in (4 mm) |
||||||
|
Microchip Technology |
Digital Potentiometer |
Automotive |
No Lead |
16 |
HVQCCN |
Square |
Plastic/Epoxy |
Yes |
150 ppm/°C |
2 |
CMOS |
TS 16949 |
2 kHz |
2-Wire Serial |
Linear |
50 KΩ |
600 μA |
5.5 V |
3 V |
3/5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.16SQ,25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Quad |
0 V |
S-PQCC-N16 |
1 |
0.039 in (1 mm) |
20 % |
0.157 in (4 mm) |
No |
257 |
e3 |
40 s |
260 °C (500 °F) |
0.157 in (4 mm) |
|||||
|
Texas Instruments |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
2 |
8 kHz |
2-Wire Serial |
Logarithmic |
2.5 KΩ |
100 μA |
4 V |
±4 V |
-4 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP16,.25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Nickel Palladium Gold |
Dual |
R-PDSO-G16 |
1 |
0.047 in (1.2 mm) |
30 % |
0.173 in (4.4 mm) |
No |
64 |
e4 |
30 s |
260 °C (500 °F) |
0.197 in (5 mm) |
|||||||||
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
35 ppm/°C |
2 |
3-Wire Serial |
Linear |
250 KΩ |
5 V |
5 V |
±2.5/3.3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP16,.25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
0 V |
R-PDSO-G16 |
0.047 in (1.2 mm) |
30 % |
0.173 in (4.4 mm) |
No |
1024 |
Nonvolatile memory; it can also operate from a 3 V nom single or ±2.25 V to ±2.75 V dual supply |
e0 |
0.197 in (5 mm) |
||||||||||||
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
CMOS |
Linear |
±2.5/3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP16,.25 |
Digital Potentiometers |
0.025 in (0.635 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G16 |
1 |
No |
e0 |
240 °C (464 °F) |
||||||||||||||||||||||
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
600 ppm/°C |
2 |
CMOS |
500 Hz |
3-Wire Serial |
Linear/Logarithmic |
10 KΩ |
2.75 V |
2.5 V |
±2.5/3/5 V |
-2.5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP16,.25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
-2.25 V |
R-PDSO-G16 |
1 |
0.047 in (1.2 mm) |
20 % |
0.173 in (4.4 mm) |
No |
256 |
Nonvolatile memory |
e0 |
240 °C (464 °F) |
0.197 in (5 mm) |
|||||||
|
Analog Devices |
Digital Potentiometer |
Automotive |
No Lead |
16 |
HVQCCN |
Square |
Plastic/Epoxy |
Yes |
35 ppm/°C |
4 |
430 Hz |
Increment/Decrement |
Linear |
100 KΩ |
2.75 V |
2.5 V |
±2.25/±2.75/2.3/5.5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.12SQ,20 |
Digital Potentiometers |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin |
Quad |
-2.25 V |
S-XQCC-N16 |
3 |
0.031 in (0.8 mm) |
8 % |
0.118 in (3 mm) |
No |
128 |
e3 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
30 ppm/°C |
2 |
650 Hz |
2-Wire Serial |
Linear |
10 KΩ |
5.5 V |
2.5 V |
-2.5 V |
Small Outline, Thin Profile, Shrink Pitch |
0.026 in (0.65 mm) |
105 °C (221 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
-2.3 V |
R-PDSO-G16 |
0.047 in (1.2 mm) |
30 % |
0.173 in (4.4 mm) |
No |
256 |
It can also operate from a 3 V nom single supply or ±2.3 V to ±2.7 V dual supply |
e3 |
260 °C (500 °F) |
0.197 in (5 mm) |
|||||||||||
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
30 ppm/°C |
2 |
CMOS |
650 Hz |
2-Wire Serial |
Linear |
10 KΩ |
5.5 V |
2.5 V |
3/5 V |
-2.5 V |
Small Outline |
SOP16,.25 |
Digital Potentiometers |
0.05 in (1.27 mm) |
105 °C (221 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
-2.3 V |
R-PDSO-G16 |
1 |
0.069 in (1.75 mm) |
30 % |
0.154 in (3.9 mm) |
No |
256 |
It can also operate from a 3 V nom single supply or ±2.3 V to ±2.7 V dual supply |
e0 |
240 °C (464 °F) |
0.39 in (9.9 mm) |
|||||||
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
30 ppm/°C |
2 |
69 Hz |
2-Wire Serial |
Linear |
100 KΩ |
5.5 V |
2.5 V |
±2.5/3/5 V |
-2.5 V |
Small Outline |
SOP16,.25 |
Digital Potentiometers |
0.05 in (1.27 mm) |
105 °C (221 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
-2.3 V |
R-PDSO-G16 |
1 |
0.069 in (1.75 mm) |
50 % |
0.154 in (3.9 mm) |
No |
256 |
It can also operate from a 3 V nom single supply or ±2.3 V to ±2.7 V dual supply |
e0 |
240 °C (464 °F) |
0.39 in (9.9 mm) |
||||||||
Analog Devices |
Digital Potentiometer |
Industrial |
No Lead |
16 |
HVQCCN |
Square |
Yes |
35 ppm/°C |
2 |
3-Wire Serial |
Logarithmic |
25 KΩ |
5.5 V |
5 V |
±2.5/3.3/5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.16SQ,25 |
Digital Potentiometers |
0.031 in (0.8 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Quad |
0 V |
S-XQCC-N16 |
0.035 in (0.9 mm) |
30 % |
0.197 in (5 mm) |
No |
1024 |
Linear or log taper settings; nonvolatile memory; can also operate from ±2.25 V to ±2.75 V supply |
e0 |
0.197 in (5 mm) |
|||||||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
35 ppm/°C |
2 |
30 Hz |
3-Wire Serial |
Linear |
200 KΩ |
5 V |
5 V |
5/15/±5 V |
-5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP16,.25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
-5 V |
R-PDSO-G16 |
1 |
0.047 in (1.2 mm) |
30 % |
0.173 in (4.4 mm) |
No |
256 |
It can also operate from a single 4.5 V to 16.5 V supply; also requires a +2.7 V to +5.5 V logic supply |
e3 |
30 s |
260 °C (500 °F) |
0.197 in (5 mm) |
||||||
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
300 ppm/°C |
1 |
CMOS |
470 Hz |
3-Wire Serial |
Linear |
10 KΩ |
15 V |
15 V |
±5/±15 V |
-15 V |
Small Outline |
SOP16,.4 |
Digital Potentiometers |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
-15 V |
R-PDSO-G16 |
1 |
0.104 in (2.65 mm) |
30 % |
0.295 in (7.5 mm) |
No |
128 |
It can also operate fron 4.5 to 33 V single supply |
e0 |
240 °C (464 °F) |
0.406 in (10.3 mm) |
|||||||
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
CMOS |
Linear |
±2.5/3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP16,.25 |
Digital Potentiometers |
0.025 in (0.635 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G16 |
1 |
No |
e0 |
240 °C (464 °F) |
||||||||||||||||||||||
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
300 ppm/°C |
1 |
CMOS |
90 Hz |
3-Wire Serial |
Linear |
50 KΩ |
5 V |
5 V |
±5/±15 V |
-5 V |
Small Outline |
SOP16,.4 |
Digital Potentiometers |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
-5 V |
R-PDSO-G16 |
1 |
0.104 in (2.65 mm) |
30 % |
0.295 in (7.5 mm) |
No |
128 |
It can also operate fron 4.5 to 33 V single supply |
e0 |
0.406 in (10.3 mm) |
||||||||
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
35 ppm/°C |
2 |
3-Wire Serial |
Logarithmic |
25 KΩ |
5.5 V |
5 V |
±2.5/3.3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP16,.25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
0 V |
R-PDSO-G16 |
0.047 in (1.2 mm) |
30 % |
0.173 in (4.4 mm) |
No |
1024 |
Linear or log taper settings; nonvolatile memory; can also operate from ±2.25 V to ±2.75 V supply |
e0 |
0.197 in (5 mm) |
||||||||||||
Analog Devices |
Digital Potentiometer |
Industrial |
No Lead |
16 |
HVQCCN |
Square |
Yes |
35 ppm/°C |
2 |
3-Wire Serial |
Logarithmic |
25 KΩ |
5.5 V |
5 V |
±2.5/3.3/5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.2SQ,32 |
Digital Potentiometers |
0.031 in (0.8 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Quad |
0 V |
S-XQCC-N16 |
0.035 in (0.9 mm) |
30 % |
0.197 in (5 mm) |
No |
1024 |
Linear or log taper settings; nonvolatile memory; can also operate from ±2.25 V to ±2.75 V supply |
e0 |
0.197 in (5 mm) |
|||||||||||||
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
600 Hz |
3-Wire Serial |
Linear |
1 MΩ |
5 V |
-4.5 V |
Small Outline |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G16 |
0.104 in (2.65 mm) |
0.295 in (7.5 mm) |
No |
128 |
Rest 3 resistor array values are: 10000, 50000, 100000 Ω |
e0 |
0.404 in (10.25 mm) |
||||||||||||||||||
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
30 ppm/°C |
2 |
310 Hz |
2-Wire Serial |
Linear |
20 KΩ |
5 V |
5 V |
5/15/±5 V |
-5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP16,.25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
-5 V |
R-PDSO-G16 |
1 |
0.047 in (1.2 mm) |
30 % |
0.173 in (4.4 mm) |
No |
256 |
Can also operate from a single +5 V to +15 V supply; also requires a +2.7 V to +5.5 V logic supply |
e0 |
240 °C (464 °F) |
0.197 in (5 mm) |
||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
35 ppm/°C |
2 |
130 Hz |
3-Wire Serial |
Linear |
50 KΩ |
5 V |
5 V |
-5 V |
Small Outline, Thin Profile, Shrink Pitch |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
-5 V |
R-PDSO-G16 |
1 |
0.047 in (1.2 mm) |
30 % |
0.173 in (4.4 mm) |
No |
256 |
It can also operate from a single 4.5 V to 16.5 V supply; also requires a +2.7 V to +5.5 V logic supply |
e3 |
260 °C (500 °F) |
0.197 in (5 mm) |
||||||||||
Analog Devices |
Digital Potentiometer |
Industrial |
No Lead |
16 |
VQCCN |
Square |
Yes |
35 ppm/°C |
2 |
3-Wire Serial |
Logarithmic |
25 KΩ |
5 V |
5 V |
Chip Carrier, Very Thin Profile |
0.031 in (0.8 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Quad |
0 V |
S-XQCC-N16 |
0.039 in (1 mm) |
30 % |
0.197 in (5 mm) |
No |
1024 |
Linear or log taper settings; nonvolatile memory; can also operate from ±2.25 V to ±2.75 V supply |
e0 |
0.197 in (5 mm) |
||||||||||||||||
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
30 ppm/°C |
2 |
150 Hz |
2-Wire Serial |
Linear |
50 KΩ |
5 V |
5 V |
5/15/±5 V |
-5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP16,.25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
-5 V |
R-PDSO-G16 |
1 |
0.047 in (1.2 mm) |
30 % |
0.173 in (4.4 mm) |
No |
256 |
Can also operate from a single +5 V to +15 V supply; also requires a +2.7 V to +5.5 V logic supply |
e0 |
240 °C (464 °F) |
0.197 in (5 mm) |
||||||||
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
30 ppm/°C |
2 |
CMOS |
69 Hz |
2-Wire Serial |
Linear |
100 KΩ |
5.5 V |
2.5 V |
3/5 V |
-2.5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP16,.25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
105 °C (221 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
-2.3 V |
R-PDSO-G16 |
1 |
0.047 in (1.2 mm) |
50 % |
0.173 in (4.4 mm) |
No |
256 |
It can also operate from a 3 V nom single supply or ±2.3 V to ±2.7 V dual supply |
e0 |
240 °C (464 °F) |
0.197 in (5 mm) |
|||||||
|
Analog Devices |
Digital Potentiometer |
Automotive |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
35 ppm/°C |
1 |
CMOS |
3 kHz |
2-Wire Serial |
Linear/Logarithmic |
100 KΩ |
2.75 V |
2.5 V |
±2.25/±2.75/2.3/5.5 V |
-2.5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP16,.25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin |
Dual |
-2.25 V |
R-PDSO-G16 |
1 |
0.047 in (1.2 mm) |
8 % |
0.173 in (4.4 mm) |
No |
128 |
Rest resistor values is 10000 Ω and control interface is increment/decrement |
e3 |
30 s |
260 °C (500 °F) |
0.197 in (5 mm) |
|||||
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
600 ppm/°C |
1 |
370 Hz |
3-Wire Serial |
Logarithmic |
10 KΩ |
3 V |
3 V |
±2.5/3/5 V |
Small Outline |
TSSOP16,.25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
0 V |
R-PDSO-G16 |
1 |
0.047 in (1.2 mm) |
20 % |
0.173 in (4.4 mm) |
No |
1024 |
Linear or log taper settings; nonvolatile memory; can also operate from ±2.25 V to ±2.75 V supply |
e0 |
240 °C (464 °F) |
0.197 in (5 mm) |
|||||||||
Analog Devices |
Digital Potentiometer |
Automotive |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
35 ppm/°C |
1 |
CMOS |
125 Hz |
Increment/Decrement |
Linear |
25 KΩ |
2.75 V |
2.5 V |
±2.5,3/5 V |
-2.5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP16,.25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
-2.25 V |
R-PDSO-G16 |
1 |
0.047 in (1.2 mm) |
30 % |
0.173 in (4.4 mm) |
No |
1024 |
e0 |
240 °C (464 °F) |
0.197 in (5 mm) |
||||||||
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
2-Wire Serial |
Linear |
100 KΩ |
5 V |
Small Outline |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G16 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
256 |
e0 |
0.39 in (9.9 mm) |
||||||||||||||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
Ball |
16 |
LBGA |
Square |
Plastic/Epoxy |
Yes |
50 ppm/°C |
2 |
2-Wire Serial |
Linear |
2.5 KΩ |
3.6 V |
3.3 V |
GRID ARRAY, LOW PROFILE |
0.039 in (1 mm) |
95 °C (203 °F) |
-40 °C (-40 °F) |
Tin Silver Copper |
Bottom |
-300 mV |
S-PBGA-B16 |
0.059 in (1.5 mm) |
0.157 in (4 mm) |
No |
256 |
Nonvolatile memory; other resistor value is 2500 Ω; it can also operate from a 5 V supply |
e1 |
0.157 in (4 mm) |
|||||||||||||||
|
Analog Devices |
Digital Potentiometer |
Commercial |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
50 ppm/°C |
2 |
2-Wire Serial |
Linear |
20 KΩ |
3.6 V |
3.3 V |
3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP16,.25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Matte Tin - annealed |
Dual |
-300 mV |
R-PDSO-G16 |
1 |
0.043 in (1.1 mm) |
0.173 in (4.4 mm) |
No |
256 |
Nonvolatile memory; other resistor value is 20000 Ω; it can also operate from a 5 V supply |
e3 |
30 s |
260 °C (500 °F) |
0.197 in (5 mm) |
|||||||||
Analog Devices |
Digital Potentiometer |
Industrial |
Through-Hole |
16 |
DIP |
Rectangular |
Plastic/Epoxy |
No |
CMOS |
2-Wire Serial |
Linear |
50 KΩ |
5 V |
3/5 V |
In-Line |
DIP16,.3 |
Digital Potentiometers |
0.1 in (2.54 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDIP-T16 |
0.18 in (4.572 mm) |
0.3 in (7.62 mm) |
No |
256 |
e0 |
0.755 in (19.175 mm) |
|||||||||||||||||
Analog Devices |
Digital Potentiometer |
Industrial |
Through-Hole |
16 |
DIP |
Rectangular |
Plastic/Epoxy |
No |
2-Wire Serial |
Linear |
100 KΩ |
5 V |
In-Line |
0.1 in (2.54 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDIP-T16 |
0.18 in (4.572 mm) |
0.3 in (7.62 mm) |
No |
256 |
e0 |
0.755 in (19.175 mm) |
|||||||||||||||||||||
|
Analog Devices |
Digital Potentiometer |
Commercial |
Ball |
16 |
LBGA |
Square |
Plastic/Epoxy |
Yes |
50 ppm/°C |
2 |
2-Wire Serial |
Linear |
50 KΩ |
3.6 V |
3.3 V |
3/5 V |
GRID ARRAY, LOW PROFILE |
BGA16,4X4,40 |
Digital Potentiometers |
0.039 in (1 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Tin Silver Copper |
Bottom |
-300 mV |
S-PBGA-B16 |
3 |
0.059 in (1.5 mm) |
0.157 in (4 mm) |
No |
256 |
Nonvolatile memory; other resistor value is 50000 Ω; it can also operate from a 5 V supply |
e1 |
30 s |
260 °C (500 °F) |
0.157 in (4 mm) |
|||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
No Lead |
16 |
HVQCCN |
Square |
Yes |
35 ppm/°C |
1 |
BICMOS |
Increment/Decrement |
Linear |
10 KΩ |
5 V |
3/5 V |
0 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.12SQ,20 |
Digital Potentiometers |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Quad |
S-XQCC-N16 |
1 |
0.031 in (0.8 mm) |
0.118 in (3 mm) |
No |
1024 |
Nonvolatile memory; it can also operate with 2.5 V dual supply |
e3 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
||||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
50 ppm/°C |
2 |
2-Wire Serial |
Linear |
50 KΩ |
3.6 V |
3.3 V |
3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP16,.25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
95 °C (203 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
-300 mV |
R-PDSO-G16 |
1 |
0.043 in (1.1 mm) |
0.173 in (4.4 mm) |
No |
256 |
Nonvolatile memory; other resistor value is 50000 Ω; it can also operate from a 5 V supply |
e3 |
30 s |
260 °C (500 °F) |
0.197 in (5 mm) |
|||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
Through-Hole |
16 |
DIP |
Rectangular |
Plastic/Epoxy |
No |
750 ppm/°C |
2 |
CMOS |
100 Hz |
2-Wire Serial |
Linear |
100 KΩ |
3.5 V |
3 V |
3/5 V |
In-Line |
DIP16,.3 |
Digital Potentiometers |
0.1 in (2.54 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
-500 mV |
R-PDIP-T16 |
0.18 in (4.572 mm) |
20 % |
0.3 in (7.62 mm) |
No |
256 |
ALSO OPERATES FROM 5 V NOMINAL SUPPLY |
e3 |
0.755 in (19.175 mm) |
|||||||||
Analog Devices |
Digital Potentiometer |
Industrial |
Through-Hole |
16 |
DIP |
Rectangular |
Plastic/Epoxy |
No |
2-Wire Serial |
Linear |
10 KΩ |
5 V |
In-Line |
0.1 in (2.54 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDIP-T16 |
0.18 in (4.572 mm) |
0.3 in (7.62 mm) |
No |
256 |
e0 |
0.755 in (19.175 mm) |
|||||||||||||||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
No Lead |
16 |
QCCN |
Square |
Plastic/Epoxy |
Yes |
BICMOS |
Linear |
3/5 V |
Chip Carrier |
LCC16,.12SQ,20 |
Digital Potentiometers |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Quad |
S-PQCC-N16 |
1 |
No |
e3 |
30 s |
260 °C (500 °F) |
||||||||||||||||||||
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
50 ppm/°C |
2 |
2-Wire Serial |
Linear |
30 KΩ |
3.6 V |
3.3 V |
Small Outline, Thin Profile, Shrink Pitch |
0.026 in (0.65 mm) |
95 °C (203 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
-300 mV |
R-PDSO-G16 |
1 |
0.043 in (1.1 mm) |
0.173 in (4.4 mm) |
No |
256 |
Nonvolatile memory; other resistor value is 10000 Ω; it can also operate from a 5 V supply |
e0 |
0.197 in (5 mm) |
|||||||||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
750 ppm/°C |
2 |
3-Wire Serial |
Linear |
10 KΩ |
6 V |
5 V |
5 V |
Small Outline |
SOP16,.4 |
Digital Potentiometers |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
-6 V |
R-PDSO-G16 |
1 |
0.104 in (2.65 mm) |
20 % |
0.295 in (7.5 mm) |
No |
256 |
e3 |
30 s |
260 °C (500 °F) |
0.406 in (10.3 mm) |
Digital potentiometers, also known as DigiPOTs, are electronic devices that allow the user to adjust the resistance of a circuit digitally. They are designed to replace traditional mechanical potentiometers and offer several advantages, such as greater precision, faster response, and remote control.
DigiPOTs consist of a set of resistive elements, divided into several segments, and a wiper that can be moved to change the resistance between two terminals. The position of the wiper is controlled by digital signals, which are decoded to select the appropriate resistance segment. DigiPOTs can be programmed to provide a specific resistance value or to change the resistance in response to a specific input signal.
DigiPOTs are used in a wide range of applications, such as audio amplifiers, motor control circuits, and power management systems. They offer several advantages over traditional potentiometers, such as faster response time, more precise adjustment, and greater reliability. DigiPOTs also eliminate the need for mechanical parts, which can wear out over time and require replacement.
DigiPOTs come in different configurations, including single, dual, and quad-channel versions, each with different resistance ranges and step sizes. They can be controlled by a microcontroller or other digital circuit, and some models offer features such as non-volatile memory, temperature compensation, and programmable resolution.