Part | RoHS | Manufacturer | Converter Type | Temperature Grade | Terminal Form | No. of Terminals | Package Code | Package Shape | Package Body Material | Surface Mount | Nominal Temperature Coefficient | No. of Functions | Technology | Screening Level | Nominal Bandwidth | Control Interface | Resistance Law | Nominal Total Resistance | Maximum Supply Current | Maximum Resistor Terminal Voltage | Maximum Linearity Error (EL) | Nominal Supply Voltage | Power Supplies (V) | Nominal Negative Supply Voltage | Package Style (Meter) | Package Equivalence Code | Sub-Category | Terminal Pitch | Maximum Operating Temperature | Minimum Operating Temperature | Terminal Finish | Terminal Position | Minimum Resistor Terminal Voltage | JESD-30 Code | Moisture Sensitivity Level (MSL) | Maximum Seated Height | Maximum Resistance Tolerance | Width | Qualification | No. of Positions | Additional Features | JESD-609 Code | Maximum Time At Peak Reflow Temperature (s) | Peak Reflow Temperature (C) | Length | Input Bit Code |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SSOP |
Rectangular |
Plastic/Epoxy |
Yes |
1 |
CMOS |
Increment/Decrement |
Linear |
10 KΩ |
3/5 V |
Small Outline, Shrink Pitch |
SSOP16,.25 |
Digital Potentiometers |
0.025 in (0.635 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
R-PDSO-G16 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
e3 |
30 s |
260 °C (500 °F) |
0.193 in (4.9 mm) |
||||||||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
No Lead |
16 |
HVQCCN |
Square |
Plastic/Epoxy |
Yes |
35 ppm/°C |
2 |
BICMOS |
45 Hz |
3-Wire Serial |
Linear |
100 KΩ |
5.25 V |
5 V |
3/5 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.12SQ,20 |
Digital Potentiometers |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Quad |
2.7 V |
S-PQCC-N16 |
1 |
0.031 in (0.8 mm) |
0.118 in (3 mm) |
No |
256 |
Nonvolatile memory |
e3 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
|||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
Ball |
16 |
LBGA |
Square |
Plastic/Epoxy |
Yes |
50 ppm/°C |
2 |
2-Wire Serial |
Linear |
10 KΩ |
3.6 V |
3.3 V |
GRID ARRAY, LOW PROFILE |
0.039 in (1 mm) |
95 °C (203 °F) |
-40 °C (-40 °F) |
Tin Silver Copper |
Bottom |
-300 mV |
S-PBGA-B16 |
0.059 in (1.5 mm) |
0.157 in (4 mm) |
No |
256 |
Nonvolatile memory; other resistor value is 2500 Ω; it can also operate from a 5 V supply |
e1 |
0.157 in (4 mm) |
|||||||||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
No Lead |
16 |
VQCCN |
Square |
Yes |
35 ppm/°C |
2 |
BICMOS |
3-Wire Serial |
Logarithmic |
10 KΩ |
5 V |
5 V |
5 V |
Chip Carrier, Very Thin Profile |
LCC16,.16SQ,25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Quad |
0 V |
S-XQCC-N16 |
1 |
0.031 in (0.8 mm) |
0.157 in (4 mm) |
No |
32 |
e3 |
30 s |
260 °C (500 °F) |
0.157 in (4 mm) |
||||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
Ball |
16 |
LBGA |
Square |
Plastic/Epoxy |
Yes |
850 ppm/°C |
2 |
125 Hz |
2-Wire Serial |
Linear |
50 KΩ |
3.3 V |
3 V |
3.3/5 V |
GRID ARRAY, LOW PROFILE |
BGA16,4X4,40 |
Digital Potentiometers |
0.039 in (1 mm) |
95 °C (203 °F) |
-40 °C (-40 °F) |
Tin Silver Copper |
Bottom |
-300 mV |
S-PBGA-B16 |
3 |
0.059 in (1.5 mm) |
20 % |
0.157 in (4 mm) |
No |
256 |
Nonvolatile memory; other resistor value is 10000 Ω; it can also operate from a 5 V supply |
e1 |
30 s |
260 °C (500 °F) |
0.157 in (4 mm) |
|||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
No Lead |
16 |
HVQCCN |
Square |
Yes |
35 ppm/°C |
2 |
BICMOS |
50 Hz |
3-Wire Serial |
Linear |
50 KΩ |
5 V |
3/5 V |
0 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.2SQ,32 |
Digital Potentiometers |
0.031 in (0.8 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Quad |
S-XQCC-N16 |
1 |
0.031 in (0.8 mm) |
0.197 in (5 mm) |
No |
1024 |
Nonvolatile; other resistor value is 50000 Ω w/1024 tap postions; also operate w/2.5 V dual supply |
e3 |
30 s |
260 °C (500 °F) |
0.197 in (5 mm) |
|||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
Ball |
16 |
LBGA |
Square |
Plastic/Epoxy |
Yes |
50 ppm/°C |
2 |
2-Wire Serial |
Linear |
10 KΩ |
3.6 V |
3.3 V |
GRID ARRAY, LOW PROFILE |
0.039 in (1 mm) |
95 °C (203 °F) |
-40 °C (-40 °F) |
Tin Silver Copper |
Bottom |
-300 mV |
S-PBGA-B16 |
0.059 in (1.5 mm) |
0.157 in (4 mm) |
No |
256 |
Nonvolatile memory; other resistor value is 2500 Ω; it can also operate from a 5 V supply |
e1 |
0.157 in (4 mm) |
|||||||||||||||
Analog Devices |
Digital Potentiometer |
Industrial |
Through-Hole |
16 |
DIP |
Rectangular |
Plastic/Epoxy |
No |
2-Wire Serial |
Linear |
100 KΩ |
5 V |
In-Line |
0.1 in (2.54 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDIP-T16 |
0.18 in (4.572 mm) |
0.3 in (7.62 mm) |
No |
256 |
e0 |
0.755 in (19.175 mm) |
|||||||||||||||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SSOP |
Rectangular |
Plastic/Epoxy |
Yes |
1 |
CMOS |
Increment/Decrement |
Linear |
10 KΩ |
3/5 V |
Small Outline, Shrink Pitch |
SSOP16,.25 |
Digital Potentiometers |
0.025 in (0.635 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
R-PDSO-G16 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
e3 |
30 s |
260 °C (500 °F) |
0.193 in (4.9 mm) |
||||||||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
No Lead |
16 |
HVQCCN |
Square |
Yes |
35 ppm/°C |
1 |
BICMOS |
50 Hz |
Increment/Decrement |
Linear |
50 KΩ |
5 V |
3/5 V |
0 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.12SQ,20 |
Digital Potentiometers |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Quad |
S-XQCC-N16 |
1 |
0.031 in (0.8 mm) |
0.118 in (3 mm) |
No |
1024 |
Nonvolatile memory; it can also operate with 2.5 V dual supply |
e3 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
|||||||||
Analog Devices |
Digital Potentiometer |
Industrial |
No Lead |
16 |
VQCCN |
Square |
Ceramic, Metal-Sealed Cofired |
Yes |
35 ppm/°C |
2 |
BICMOS |
3-Wire Serial |
Logarithmic |
10 KΩ |
3.6 V |
3/3.3 V |
Chip Carrier, Very Thin Profile |
LCC16,.16SQ,32 |
Digital Potentiometers |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Quad |
0 V |
S-CQCC-N16 |
0.039 in (1 mm) |
0.157 in (4 mm) |
No |
32 |
e0 |
20 s |
240 °C (464 °F) |
0.157 in (4 mm) |
||||||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
50 ppm/°C |
2 |
2-Wire Serial |
Linear |
10 KΩ |
3.6 V |
3.3 V |
Small Outline, Thin Profile, Shrink Pitch |
0.026 in (0.65 mm) |
95 °C (203 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
-300 mV |
R-PDSO-G16 |
1 |
0.043 in (1.1 mm) |
0.173 in (4.4 mm) |
No |
256 |
Nonvolatile memory; other resistor value is 2500 Ω; it can also operate from a 5 V supply |
e3 |
0.197 in (5 mm) |
||||||||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SSOP |
Rectangular |
Plastic/Epoxy |
Yes |
1 |
CMOS |
Increment/Decrement |
Linear |
10 KΩ |
3/5 V |
Small Outline, Shrink Pitch |
SSOP16,.25 |
Digital Potentiometers |
0.025 in (0.635 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
R-PDSO-G16 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
e3 |
30 s |
260 °C (500 °F) |
0.193 in (4.9 mm) |
||||||||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
2 |
Push-Button |
Linear |
45 KΩ |
3/5,5 V |
Small Outline |
SOP16,.25 |
Digital Potentiometers |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
R-PDSO-G16 |
No |
e3 |
|||||||||||||||||||||
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
2-Wire Serial |
Linear |
50 KΩ |
5 V |
Small Outline |
0.1 in (2.54 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G16 |
1 |
0.18 in (4.57 mm) |
0.25 in (6.35 mm) |
No |
256 |
e0 |
0.76 in (19.304 mm) |
||||||||||||||||||||
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
2-Wire Serial |
Linear |
50 KΩ |
5 V |
Small Outline |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G16 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
256 |
e0 |
0.39 in (9.9 mm) |
||||||||||||||||||||
Analog Devices |
Digital Potentiometer |
Industrial |
No Lead |
16 |
VQCCN |
Square |
Ceramic, Metal-Sealed Cofired |
Yes |
35 ppm/°C |
2 |
BICMOS |
3-Wire Serial |
Logarithmic |
10 KΩ |
5.5 V |
5 V |
Chip Carrier, Very Thin Profile |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Quad |
0 V |
S-CQCC-N16 |
0.039 in (1 mm) |
0.157 in (4 mm) |
No |
32 |
e0 |
0.157 in (4 mm) |
||||||||||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
750 ppm/°C |
2 |
700 Hz |
3-Wire Serial |
Logarithmic |
45 KΩ |
3.5 V |
3 V |
3/5 V |
Small Outline |
SOP16,.4 |
Digital Potentiometers |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
-500 mV |
R-PDSO-G16 |
1 |
0.104 in (2.65 mm) |
20 % |
0.295 in (7.5 mm) |
No |
65 |
Other resistor value is 45000 Ω with 65 tap positions |
e3 |
30 s |
260 °C (500 °F) |
0.406 in (10.3 mm) |
|||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
CMOS |
Linear |
5 V |
5 V |
Small Outline |
SOP16,.4 |
Digital Potentiometers |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
R-PDSO-G16 |
1 |
No |
e3 |
30 s |
260 °C (500 °F) |
|||||||||||||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SSOP |
Rectangular |
Plastic/Epoxy |
Yes |
35 ppm/°C |
2 |
BICMOS |
3-Wire Serial |
Logarithmic |
10 KΩ |
5 V |
5 V |
5 V |
Small Outline, Shrink Pitch |
SSOP16,.25 |
Digital Potentiometers |
0.025 in (0.635 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
0 V |
R-PDSO-G16 |
1 |
0.068 in (1.73 mm) |
0.154 in (3.9 mm) |
No |
32 |
e3 |
30 s |
260 °C (500 °F) |
0.193 in (4.89 mm) |
|||||||||
Analog Devices |
Digital Potentiometer |
Commercial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
2-Wire Serial |
Linear |
100 KΩ |
5 V |
Small Outline |
0.05 in (1.27 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Tin Lead |
Dual |
R-PDSO-G16 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
256 |
e0 |
0.39 in (9.9 mm) |
||||||||||||||||||||
|
Analog Devices |
Digital Potentiometer |
Automotive |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
BICMOS |
Linear |
1.8/5 V |
Small Outline |
TSSOP16,.25 |
Digital Potentiometers |
0.025 in (0.635 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
R-PDSO-G16 |
1 |
No |
e3 |
30 s |
260 °C (500 °F) |
||||||||||||||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SSOP |
Rectangular |
Plastic/Epoxy |
Yes |
35 ppm/°C |
2 |
BICMOS |
3-Wire Serial |
Logarithmic |
10 KΩ |
3.6 V |
3/3.3 V |
Small Outline, Shrink Pitch |
SSOP16,.25 |
Digital Potentiometers |
0.025 in (0.635 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
0 V |
R-PDSO-G16 |
1 |
0.068 in (1.73 mm) |
0.154 in (3.9 mm) |
No |
32 |
e3 |
30 s |
260 °C (500 °F) |
0.193 in (4.89 mm) |
||||||||||
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
550 ppm/°C |
1 |
200 Hz |
2-Wire Serial |
Linear |
50 KΩ |
5.3 V |
5 V |
3/5 V |
0 V |
Small Outline |
SOP16,.25 |
Digital Potentiometers |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
-300 mV |
R-PDSO-G16 |
0.069 in (1.75 mm) |
20 % |
0.154 in (3.9 mm) |
No |
256 |
e0 |
0.39 in (9.9 mm) |
|||||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
No Lead |
16 |
HVQCCN |
Square |
Yes |
35 ppm/°C |
1 |
BICMOS |
Increment/Decrement |
Linear |
50 KΩ |
5 V |
3/5 V |
0 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.12SQ,20 |
Digital Potentiometers |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Quad |
S-XQCC-N16 |
1 |
0.031 in (0.8 mm) |
0.118 in (3 mm) |
No |
1024 |
Nonvolatile memory; it can also operate with 2.5 V dual supply |
e3 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
||||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
No Lead |
16 |
HVQCCN |
Square |
Yes |
35 ppm/°C |
2 |
BICMOS |
50 Hz |
3-Wire Serial |
Linear |
50 KΩ |
5 V |
3/5 V |
0 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.2SQ,32 |
Digital Potentiometers |
0.031 in (0.8 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Quad |
S-XQCC-N16 |
1 |
0.031 in (0.8 mm) |
0.197 in (5 mm) |
No |
1024 |
Nonvolatile; other resistor value is 50000 Ω w/1024 tap postions; also operate w/2.5 V dual supply |
e3 |
30 s |
260 °C (500 °F) |
0.197 in (5 mm) |
|||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
750 ppm/°C |
2 |
5 kHz |
2-Wire Serial |
Logarithmic |
45 KΩ |
5.5 V |
5 V |
Small Outline |
0.025 in (0.635 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
0 V |
R-PDSO-G16 |
1 |
0.069 in (1.75 mm) |
20 % |
0.154 in (3.9 mm) |
No |
64 |
e3 |
30 s |
260 °C (500 °F) |
0.193 in (4.89 mm) |
|||||||||||
Analog Devices |
Digital Potentiometer |
Commercial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
2-Wire Serial |
Linear |
50 KΩ |
5 V |
Small Outline |
0.05 in (1.27 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Tin Lead |
Dual |
R-PDSO-G16 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
256 |
e0 |
0.39 in (9.9 mm) |
||||||||||||||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
No Lead |
16 |
HVQCCN |
Square |
Yes |
35 ppm/°C |
1 |
BICMOS |
Increment/Decrement |
Linear |
50 KΩ |
5 V |
3/5 V |
0 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.12SQ,20 |
Digital Potentiometers |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Quad |
S-XQCC-N16 |
1 |
0.031 in (0.8 mm) |
0.118 in (3 mm) |
No |
1024 |
Nonvolatile memory; it can also operate with 2.5 V dual supply |
e3 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
||||||||||
|
Analog Devices |
Digital Potentiometer |
Automotive |
No Lead |
16 |
HVQCCN |
Square |
Yes |
35 ppm/°C |
2 |
BICMOS |
600 Hz |
3-Wire Serial |
Linear |
10 KΩ |
1.8 V |
1.8 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Quad |
0 V |
S-XQCC-N16 |
1 |
0.031 in (0.8 mm) |
25 % |
0.118 in (3 mm) |
No |
256 |
e3 |
30 s |
260 °C (500 °F) |
0.118 in (3 mm) |
|||||||||||
|
Analog Devices |
Digital Potentiometer |
Automotive |
No Lead |
16 |
QCCN |
Square |
Yes |
BICMOS |
Linear |
3/5 V |
Chip Carrier |
LCC16,.12SQ,20 |
Digital Potentiometers |
0.02 in (0.5 mm) |
125 °C (257 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Quad |
S-XQCC-N16 |
1 |
No |
e3 |
30 s |
260 °C (500 °F) |
|||||||||||||||||||||
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
2-Wire Serial |
Linear |
10 KΩ |
5 V |
Small Outline |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G16 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
256 |
e0 |
0.39 in (9.9 mm) |
||||||||||||||||||||
|
Analog Devices |
Digital Potentiometer |
Commercial |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
50 ppm/°C |
2 |
2-Wire Serial |
Linear |
20 KΩ |
3.6 V |
3.3 V |
3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP16,.25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Matte Tin - annealed |
Dual |
-300 mV |
R-PDSO-G16 |
1 |
0.043 in (1.1 mm) |
0.173 in (4.4 mm) |
No |
256 |
Nonvolatile memory; other resistor value is 20000 Ω; it can also operate from a 5 V supply |
e3 |
30 s |
260 °C (500 °F) |
0.197 in (5 mm) |
|||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
50 ppm/°C |
2 |
2-Wire Serial |
Linear |
50 KΩ |
3.6 V |
3.3 V |
3/5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP16,.25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
95 °C (203 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
-300 mV |
R-PDSO-G16 |
1 |
0.043 in (1.1 mm) |
0.173 in (4.4 mm) |
No |
256 |
Nonvolatile memory; other resistor value is 50000 Ω; it can also operate from a 5 V supply |
e3 |
30 s |
260 °C (500 °F) |
0.197 in (5 mm) |
|||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
No Lead |
16 |
HVQCCN |
Square |
Yes |
35 ppm/°C |
2 |
BICMOS |
50 Hz |
3-Wire Serial |
Linear |
50 KΩ |
5 V |
3/5 V |
0 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.2SQ,32 |
Digital Potentiometers |
0.031 in (0.8 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Quad |
S-XQCC-N16 |
1 |
0.031 in (0.8 mm) |
0.197 in (5 mm) |
No |
1024 |
Nonvolatile; other resistor value is 50000 Ω w/1024 tap postions; also operate w/2.5 V dual supply |
e3 |
30 s |
260 °C (500 °F) |
0.197 in (5 mm) |
|||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
750 ppm/°C |
2 |
CMOS |
5 kHz |
2-Wire Serial |
Logarithmic |
45 KΩ |
5 V |
5 V |
5,±5/±6 V |
-5 V |
Small Outline, Thin Profile, Shrink Pitch |
TSSOP16,.25 |
Digital Potentiometers |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
-5 V |
R-PDSO-G16 |
1 |
0.043 in (1.1 mm) |
20 % |
0.173 in (4.4 mm) |
No |
64 |
e3 |
30 s |
260 °C (500 °F) |
0.197 in (5 mm) |
||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
750 ppm/°C |
2 |
5 kHz |
2-Wire Serial |
Logarithmic |
45 KΩ |
5.5 V |
5 V |
Small Outline, Thin Profile, Shrink Pitch |
0.026 in (0.65 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
0 V |
R-PDSO-G16 |
1 |
0.043 in (1.1 mm) |
20 % |
0.173 in (4.4 mm) |
No |
64 |
e3 |
30 s |
260 °C (500 °F) |
0.197 in (5 mm) |
|||||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
No Lead |
16 |
HVQCCN |
Square |
Yes |
35 ppm/°C |
2 |
BICMOS |
250 Hz |
3-Wire Serial |
Linear |
10 KΩ |
5 V |
3/5 V |
0 V |
Chip Carrier, Heat Sink/Slug, Very Thin Profile |
LCC16,.2SQ,32 |
Digital Potentiometers |
0.031 in (0.8 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Quad |
S-XQCC-N16 |
1 |
0.031 in (0.8 mm) |
0.197 in (5 mm) |
No |
1024 |
Nonvolatile; other resistor value is 10000 Ω w/1024 tap postions; also operate w/2.5 V dual supply |
e3 |
30 s |
260 °C (500 °F) |
0.197 in (5 mm) |
|||||||||
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
50 ppm/°C |
2 |
2-Wire Serial |
Linear |
30 KΩ |
3.6 V |
3.3 V |
Small Outline, Thin Profile, Shrink Pitch |
0.026 in (0.65 mm) |
95 °C (203 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
-300 mV |
R-PDSO-G16 |
1 |
0.043 in (1.1 mm) |
0.173 in (4.4 mm) |
No |
256 |
Nonvolatile memory; other resistor value is 10000 Ω; it can also operate from a 5 V supply |
e0 |
0.197 in (5 mm) |
|||||||||||||||
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
2-Wire Serial |
Linear |
50 KΩ |
5 V |
Small Outline |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
R-PDSO-G16 |
1 |
0.069 in (1.75 mm) |
0.154 in (3.9 mm) |
No |
256 |
e0 |
0.39 in (9.9 mm) |
||||||||||||||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
2 |
Push-Button |
Linear |
45 KΩ |
3/5,5 V |
Small Outline |
TSSOP16,.25 |
Digital Potentiometers |
0.025 in (0.635 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
R-PDSO-G16 |
1 |
No |
e3 |
||||||||||||||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
750 ppm/°C |
2 |
700 Hz |
3-Wire Serial |
Logarithmic |
45 KΩ |
3.5 V |
3 V |
3/5 V |
Small Outline |
SOP16,.4 |
Digital Potentiometers |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
-500 mV |
R-PDSO-G16 |
1 |
0.104 in (2.65 mm) |
20 % |
0.295 in (7.5 mm) |
No |
65 |
Other resistor value is 45000 Ω with 65 tap positions |
e3 |
30 s |
260 °C (500 °F) |
0.406 in (10.3 mm) |
|||||||
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
SOP |
Rectangular |
Plastic/Epoxy |
Yes |
550 ppm/°C |
1 |
100 Hz |
2-Wire Serial |
Linear |
100 KΩ |
5.3 V |
5 V |
3/5 V |
0 V |
Small Outline |
SOP16,.25 |
Digital Potentiometers |
0.05 in (1.27 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
-300 mV |
R-PDSO-G16 |
0.069 in (1.75 mm) |
20 % |
0.154 in (3.9 mm) |
No |
256 |
e0 |
0.39 in (9.9 mm) |
|||||||||||
Analog Devices |
Digital Potentiometer |
Commercial |
Through-Hole |
16 |
DIP |
Rectangular |
Plastic/Epoxy |
No |
1 |
2-Wire Serial |
Linear |
In-Line |
0.1 in (2.54 mm) |
70 °C (158 °F) |
0 °C (32 °F) |
Tin Lead |
Dual |
R-PDIP-T16 |
0.18 in (4.572 mm) |
0.3 in (7.62 mm) |
No |
256 |
e0 |
0.755 in (19.175 mm) |
||||||||||||||||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
No Lead |
16 |
QCCN |
Square |
Plastic/Epoxy |
Yes |
BICMOS |
Linear |
3/5 V |
Chip Carrier |
LCC16,.12SQ,20 |
Digital Potentiometers |
0.02 in (0.5 mm) |
85 °C (185 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Quad |
S-PQCC-N16 |
1 |
No |
e3 |
30 s |
260 °C (500 °F) |
||||||||||||||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
50 ppm/°C |
2 |
2-Wire Serial |
Linear |
2.5 KΩ |
3.6 V |
3.3 V |
Small Outline, Thin Profile, Shrink Pitch |
0.026 in (0.65 mm) |
95 °C (203 °F) |
-40 °C (-40 °F) |
Matte Tin - annealed |
Dual |
-300 mV |
R-PDSO-G16 |
1 |
0.043 in (1.1 mm) |
0.173 in (4.4 mm) |
No |
256 |
Nonvolatile memory; other resistor value is 2500 Ω; it can also operate from a 5 V supply |
e3 |
0.197 in (5 mm) |
||||||||||||||
Analog Devices |
Digital Potentiometer |
Industrial |
Gull Wing |
16 |
TSSOP |
Rectangular |
Plastic/Epoxy |
Yes |
50 ppm/°C |
2 |
2-Wire Serial |
Linear |
2.5 KΩ |
3.6 V |
3.3 V |
Small Outline, Thin Profile, Shrink Pitch |
0.026 in (0.65 mm) |
95 °C (203 °F) |
-40 °C (-40 °F) |
Tin Lead |
Dual |
-300 mV |
R-PDSO-G16 |
1 |
0.043 in (1.1 mm) |
0.173 in (4.4 mm) |
No |
256 |
Nonvolatile memory; other resistor value is 2500 Ω; it can also operate from a 5 V supply |
e0 |
0.197 in (5 mm) |
|||||||||||||||
|
Analog Devices |
Digital Potentiometer |
Industrial |
Ball |
16 |
LBGA |
Square |
Plastic/Epoxy |
Yes |
50 ppm/°C |
2 |
2-Wire Serial |
Linear |
2.5 KΩ |
3.6 V |
3.3 V |
GRID ARRAY, LOW PROFILE |
0.039 in (1 mm) |
95 °C (203 °F) |
-40 °C (-40 °F) |
Tin Silver Copper |
Bottom |
-300 mV |
S-PBGA-B16 |
0.059 in (1.5 mm) |
0.157 in (4 mm) |
No |
256 |
Nonvolatile memory; other resistor value is 2500 Ω; it can also operate from a 5 V supply |
e1 |
0.157 in (4 mm) |
Digital potentiometers, also known as DigiPOTs, are electronic devices that allow the user to adjust the resistance of a circuit digitally. They are designed to replace traditional mechanical potentiometers and offer several advantages, such as greater precision, faster response, and remote control.
DigiPOTs consist of a set of resistive elements, divided into several segments, and a wiper that can be moved to change the resistance between two terminals. The position of the wiper is controlled by digital signals, which are decoded to select the appropriate resistance segment. DigiPOTs can be programmed to provide a specific resistance value or to change the resistance in response to a specific input signal.
DigiPOTs are used in a wide range of applications, such as audio amplifiers, motor control circuits, and power management systems. They offer several advantages over traditional potentiometers, such as faster response time, more precise adjustment, and greater reliability. DigiPOTs also eliminate the need for mechanical parts, which can wear out over time and require replacement.
DigiPOTs come in different configurations, including single, dual, and quad-channel versions, each with different resistance ranges and step sizes. They can be controlled by a microcontroller or other digital circuit, and some models offer features such as non-volatile memory, temperature compensation, and programmable resolution.