LINE RECEIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
DS90LV804TSQX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.45 V	4	CMOS		3.2 ns	GENERAL PURPOSE	140 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.45 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	3.15 V	Line Driver or Receivers	.00001 Amp	3.15 V	.5 mm	85 Cel		DIFFERENTIAL	-40 Cel	4	MATTE TIN	QUAD	S-PQCC-N32	3	.8 mm	5 mm	Not Qualified		COMPLEMENTARY	4		YES	e3	30	260	5 mm	.25 V	3.2 ns
MAX2769ETI+T	Analog Devices	LINE RECEIVER																															Matte Tin (Sn) - annealed			1									e3	30	260
AM26LV32EIDRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4				EIA-422-B; TIA-422-B; V.11	17 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	5 Amp	TRUE	4		NO	e4	30	260	9.9 mm		26 ns
DS90CR288AMTDX/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-644; TIA-644	135 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V		-10 Cel		MATTE TIN	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified			4		YES	e3	30	260	14 mm		3.5 ns
DS90LV012ATMF/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-644-A; TIA-644-A	9 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	3 V	Line Driver or Receivers		2.7 V	.95 mm	85 Cel	3.3 V		-40 Cel		Matte Tin (Sn)	DUAL	R-PDSO-G5	1	1.22 mm	1.6 mm	Not Qualified	2 Amp	TRUE	1		NO	e3	NOT SPECIFIED	260	2.92 mm		3.5 ns
DS90UB954TRGZRQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	2		AEC-Q100		ISO 10605		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N48	3	1 mm	7 mm				2	ALSO HAS SUPPLY RANGING FROM 1.045 TO 1.155V	NO	e4	NOT SPECIFIED	260	7 mm
MAX2769ETI+	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	UNSPECIFIED	YES	3.3 V	1	BICMOS			GENERAL PURPOSE		STANDARD	2.85 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					2.7 V	.5 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N28	1	.8 mm	5 mm	Not Qualified					NO	e3	30	260	5 mm		0 ns
DS34C86TMX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-422; EIA-423; FED STD 1020; FED STD 1030	23 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel		MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	6 Amp	TRUE	4		YES	e3	30	260	9.9 mm		30 ns
HI-8445PSI	Holt Integrated Circuits	LINE RECEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			ARINC 429	10 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified	5 Amp		4	ARINC INPUTS INTERNALLY LIGHTNING PROTECTED	YES	e0	30	240	6.5 mm		0 ns
HI-8588PSI-10	Holt Integrated Circuits	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS			ARINC 429	6.3 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel			-40 Cel		Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G8	1	1.773 mm	3.9 mm	Not Qualified			1			e0	30	245	4.915 mm		0 ns
DS90CR216MTD	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		4	CMOS				105 mA		3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers			.5 mm	70 Cel	3.3 V	3-STATE	-10 Cel		TIN LEAD	DUAL	R-PDSO-G48	2			Not Qualified		TRUE	4		NO	e0	20	235		2.7 V	0 ns
MAX3283EAUT-T	Maxim Integrated	LINE RECEIVER	AUTOMOTIVE	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS			EIA-422; EIA-485	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		3.3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37		Line Driver or Receivers		3 V	.95 mm	125 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G6	1	1.45 mm	1.625 mm	Not Qualified	4 Amp		1		NO	e0	20	240	2.9 mm		15 ns
MAX3283EAUT+T	Analog Devices	LINE RECEIVER	AUTOMOTIVE	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS			EIA-422; EIA-485	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37				3 V	.95 mm	125 Cel			-40 Cel		Matte Tin (Sn) - annealed	DUAL	R-PDSO-G6	1	1.45 mm	1.625 mm	Not Qualified	4 Amp		1		NO	e3	30	260	2.9 mm		15 ns
DS90LT012AQMFE/NOPB	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100		EIA-644-A; TIA-644-A	9 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	3 V	Line Driver or Receivers		3 V	.95 mm	125 Cel	3.3 V		-40 Cel		Matte Tin (Sn)	DUAL	R-PDSO-G5	1	1.45 mm	1.6 mm	Not Qualified	2 Amp	TRUE	1		NO	e3	NOT SPECIFIED	260	2.9 mm		3.5 ns
ISL3280EFHZ-T	Renesas Electronics	LINE RECEIVER	AUTOMOTIVE	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS			EIA-485; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH					3 V	.95 mm	125 Cel			-40 Cel		MATTE TIN	DUAL	R-PDSO-G5	2	1.45 mm	1.6 mm				1		NO	e3	30	260	2.9 mm		60 ns
DS90LV032ATMTC/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644	.02 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers		3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel		MATTE TIN	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	2 Amp	TRUE	4		NO	e3	30	260	5 mm	.25 V	3.3 ns
AM26C32IPWR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BICMOS			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.5 V	Line Driver or Receivers		4.5 V	.65 mm	85 Cel	5 V	3-STATE	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	6 Amp	TRUE	4		NO	e4	NOT SPECIFIED	260	5 mm		27 ns
AM26C32IPWRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BICMOS			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.5 V	Line Driver or Receivers		4.5 V	.65 mm	85 Cel	5 V	3-STATE	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	6 Amp	TRUE	4		NO	e4	NOT SPECIFIED	260	5 mm		27 ns
ST26C32ABDR	STMicroelectronics	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-422; EIA-423	23 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	6 Amp		4		NO	e4	30	260	9.9 mm		30 ns
DS90LV804TSQ/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.45 V	4	CMOS		3.2 ns	GENERAL PURPOSE	140 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.45 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	3.15 V	Line Driver or Receivers	.00001 Amp	3.15 V	.5 mm	85 Cel		DIFFERENTIAL	-40 Cel	4	MATTE TIN	QUAD	S-PQCC-N32	3	.8 mm	5 mm	Not Qualified		COMPLEMENTARY	4		YES	e3	30	260	5 mm	.25 V	3.2 ns
AM26LS32ACPWR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.75 V	Line Driver or Receivers		4.75 V	.65 mm	70 Cel	5 V	3-STATE	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	NOT SPECIFIED	260	5 mm		35 ns
MAX3281EAUT-T	Maxim Integrated	LINE RECEIVER	AUTOMOTIVE	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS			EIA-422; EIA-485	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		3.3/5	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37		Line Driver or Receivers		3 V	.95 mm	125 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G6	1	1.45 mm	1.625 mm	Not Qualified	4 Amp		1		NO	e0			2.9 mm		15 ns
MAX3281EAUT+T	Analog Devices	LINE RECEIVER	AUTOMOTIVE	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS			EIA-422; EIA-485	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP6,.11,37				3 V	.95 mm	125 Cel			-40 Cel		Matte Tin (Sn) - annealed	DUAL	R-PDSO-G6	1	1.45 mm	1.625 mm	Not Qualified	4 Amp		1		NO	e3	30	260	2.9 mm		15 ns
FIN1002M5X_NL	Fairchild Semiconductor	LINE RECEIVER	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				EIA-644; TIA-644	7 mA	DIFFERENTIAL	3.3 V		3.3	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37		Line Driver or Receivers		3 V	.95 mm	85 Cel			-40 Cel		MATTE TIN	DUAL	R-PDSO-G5	1	1.4 mm	1.6 mm	Not Qualified	8 Amp		1		NO	e3			2.9 mm		2.5 ns
HI-8445PSI-10	Holt Integrated Circuits	LINE RECEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			ARINC 429	10 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified	5 Amp		4	ARINC INPUTS INTERNALLY LIGHTNING PROTECTED	YES	e0	30	240	6.5 mm		0 ns
AM26LV32CDRE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS			EIA-422-B; TIA-422-B; V.11	17 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	70 Cel	3.3 V		0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	5 Amp		4		NO	e4	30	260	9.9 mm		20 ns
DS90CR288AMTD/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-644; TIA-644	135 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V		-10 Cel		MATTE TIN	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified			4		YES	e3	30	260	14 mm		3.5 ns
HI-8588PSIF	Holt Integrated Circuits	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS			ARINC 429		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE					4.75 V	1.27 mm	85 Cel			-40 Cel		Matte Tin (Sn)	DUAL	R-PDSO-G8	1	1.773 mm	3.9 mm	Not Qualified			1			e3	40	260	4.915 mm		0 ns
DS90UB954TRGZTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	2		AEC-Q100		ISO 10605		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N48	3	1 mm	7 mm				2	ALSO HAS SUPPLY RANGING FROM 1.045 TO 1.155V	NO	e4	NOT SPECIFIED	260	7 mm
ADV7611BSWZ	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	64	HLFQFP	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1	CMOS			GENERAL PURPOSE		STANDARD	1.8 V			FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH					1.71 V	.5 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G64	3	1.6 mm	10 mm	Not Qualified			1		NO	e3	30	260	10 mm		0 ns
AM26LS32ACDRE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5	SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	NOT SPECIFIED	260	9.9 mm		35 ns
HI-8588PSI	Holt Integrated Circuits	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS			ARINC 429	6.3 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel			-40 Cel		Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G8	1	1.773 mm	3.9 mm	Not Qualified	5.6 Amp		1			e0	30	240	4.915 mm		0 ns
AM26C32IDRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BICMOS			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	6 Amp	TRUE	4		NO	e4	NOT SPECIFIED	260	9.9 mm		27 ns
AM26C32IDRE4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BICMOS			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	6 Amp	TRUE	4		NO	e4	NOT SPECIFIED	260	9.9 mm		27 ns
HI-8588PSIF-10	Holt Integrated Circuits	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS			ARINC 429		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE					4.75 V	1.27 mm	85 Cel			-40 Cel		Matte Tin (Sn)	DUAL	R-PDSO-G8	1	1.773 mm	3.9 mm	Not Qualified			1			e3	40	260	4.915 mm		0 ns
ADV7611BSWZ-RL	Analog Devices	LINE RECEIVER																															Matte Tin (Sn) - annealed			3									e3	30	260			0 ns
FIN1028MX	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	CMOS			EIA-644; TIA-644	9 mA	DIFFERENTIAL	3.3 V		3.3	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD SILVER	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		2			e4	30	260	4.902 mm		2.5 ns
DS90LV028ATMX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	CMOS			EIA-644; TIA-644	9 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V		-40 Cel		MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	2 Amp		2		NO	e3	30	260	4.9 mm		2.5 ns
DS90LT012AQMFX/NOPB	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100		EIA-644-A; TIA-644-A	9 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	3 V	Line Driver or Receivers		3 V	.95 mm	125 Cel	3.3 V		-40 Cel		Matte Tin (Sn)	DUAL	R-PDSO-G5	1	1.45 mm	1.6 mm	Not Qualified	2 Amp	TRUE	1		NO	e3	NOT SPECIFIED	260	2.9 mm		3.5 ns
AM26C32ID	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BICMOS			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	6 Amp	TRUE	4		NO	e4	NOT SPECIFIED	260	9.9 mm		27 ns
AM26LS32ACNSR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5	SMALL OUTLINE	SOP16,.3	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	NOT SPECIFIED	260	10.2 mm		35 ns
DS90LV028ATM/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	CMOS			EIA-644; TIA-644	9 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V		-40 Cel		Matte Tin (Sn)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	2 Amp		2		NO	e3	NOT SPECIFIED	260	4.9 mm		2.5 ns
AM26LV32IDRE4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS			EIA-422-B; TIA-422-B; V.11	17 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	5 Amp		4		NO	e4	30	260	9.9 mm		20 ns
AM26LS32AIDR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5	SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	NOT SPECIFIED	260	9.9 mm		35 ns
AM26LS32ACDRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5	SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	NOT SPECIFIED	260	9.9 mm		35 ns
SN65LVDS2DBV	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	TTL		3.1 ns	EIA-644-A; TIA-644-A	8 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37		Line Driver or Receivers		2.4 V	.95 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G5	1	1.45 mm	1.6 mm	Not Qualified	8 Amp		1		NO	e4	30	260	2.9 mm		3.6 ns
HI-8445PSIF	Holt Integrated Circuits	LINE RECEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			ARINC 429	10 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		Matte Tin (Sn)	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified	5 Amp		4		YES	e3	40	260	6.5 mm		0 ns
DS90LV032ATMX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644	.02 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel		MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	2 Amp	TRUE	4		NO	e3	30	260	9.9 mm	.25 V	3.3 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.