LINE RECEIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
HS9-26CLV32RH-8	Renesas Electronics	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	300k Rad(Si)	CERAMIC, METAL-SEALED COFIRED	YES	3.6 V	4	CMOS	MIL-PRF-38535 Class Q		EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				FLATPACK					3 V	1.27 mm	125 Cel			-55 Cel		GOLD	DUAL	R-CDFP-F16		2.92 mm	6.73 mm	Not Qualified			4			e4
HS9-26CLV32RH-Q	Renesas Electronics	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	300k Rad(Si)	CERAMIC, METAL-SEALED COFIRED	YES	3.6 V	4	CMOS	MIL-PRF-38535 Class V		EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				FLATPACK					3 V	1.27 mm	125 Cel			-55 Cel		GOLD	DUAL	R-CDFP-F16		2.92 mm	6.73 mm	Not Qualified			4			e4
AM26C32QD	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	4	BICMOS			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	6 Amp	TRUE	4		NO	e4	NOT SPECIFIED	260	9.9 mm		27 ns
DS90C032TM/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-644; TIA-644; IEEE 1596.3		DIFFERENTIAL	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	5 V		-40 Cel		MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	2 Amp		4		YES	e3	30	260	9.9 mm		6 ns
FIN1032MTCX	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4				EIA-644; TIA-644	15 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	8 Amp		4			e4	30	260	5 mm		2.5 ns
DS34LV86TM	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-422-B; TIA-422-B; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	6 Amp		4			e0	20	235	9.9 mm		35 ns
MAX2769BETI/V+CCH	Analog Devices	LINE RECEIVER												AEC-Q100																					Matte Tin (Sn) - annealed			1									e3	30	260
STMIPID02	STMicroelectronics	LINE RECEIVER																																														NOT SPECIFIED	NOT SPECIFIED
FIN1532MTCX	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-644; TIA-644	22 mA	DIFFERENTIAL	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		4.5 V	.65 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	8 Amp		4			e4	30	260	5 mm		3 ns
SN65LBC175AD	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4	BICMOS			EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	.1 Amp	TRUE	4		NO	e4	30	260	9.9 mm		16 ns
SN65LVDS348PWRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4	BICMOS			EIA-644-A; TIA-644-A	20 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	4 Amp		4		NO	e4	30	260	5 mm		6 ns
AM26C32MDREP	Texas Instruments	LINE RECEIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	4	BICMOS			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers	.00002 Amp	4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	6 Amp	TRUE	4		NO	e4	30	260	9.9 mm		27 ns
AM26LS32AIDRE4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		4		NO	e4	30	260	9.9 mm		35 ns
DS90LT012ATMFX/NOPB	National Semiconductor	LINE RECEIVER	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-644-A; TIA-644-A	9 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37		Line Driver or Receivers		2.7 V	.95 mm	85 Cel			-40 Cel		Matte Tin (Sn)	DUAL	R-PDSO-G5	1	1.22 mm	1.6 mm	Not Qualified	2 Amp		1			e3	40	260	2.92 mm		3.5 ns
DS90LV001TLD/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	8	VSON	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-644-A; TIA-644-A	70 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, VERY THIN PROFILE	SOLCC8,.11,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	Matte Tin (Sn)	DUAL	S-PDSO-N8	3	.8 mm	3 mm	Not Qualified	.01 Amp		1		YES	e3	NOT SPECIFIED	260	3 mm	.25 V	2 ns
AM26LV32EINSR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4				EIA-422-B; TIA-422-B; V.11	17 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.3	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	5 Amp	TRUE	4		NO	e4	30	260	10.2 mm		26 ns
DS26LS32MJ/883	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.5 V	4		MIL-STD-883		EIA-422; EIA-423; FED STD 1020; FED STD 1030	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers		4.5 V	2.54 mm	125 Cel	5 V	3-STATE	-55 Cel		TIN LEAD	DUAL	R-GDIP-T16	1	5.08 mm	7.62 mm	Not Qualified	8 Amp	TRUE	4	LG-MAX; SEATED HGT-NOM	NO	e0			19.94 mm		120 ns
MAX3096ESE	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-422; EIA-423; EIA-485	4 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified			4			e0	20	240	9.9 mm		123 ns
MAX3096ESE+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4	BICMOS			EIA-485; EIA-422	4 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3.135 V	1.27 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified			4		NO	e3	30	260	9.9 mm		127 ns
MAX9113EKA-T	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	8	LSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	2	CMOS			EIA-644; TIA-644		DIFFERENTIAL	3.3 V				SMALL OUTLINE, LOW PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G8	1	1.45 mm	1.625 mm	Not Qualified			2		NO	e0			2.9 mm		2.5 ns
MAX9113EKA+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	8	LSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	2	CMOS			EIA-644; TIA-644	11 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.45 mm	1.625 mm	Not Qualified	4 Amp		2			e3	30	260	2.9 mm		2.5 ns
SN75ALS197DRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR			V.10; V.11; X.26; X.27	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	16 Amp	TRUE	4		NO	e4	30	260	9.9 mm	1 V	22 ns
AM26C32CDRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	4	BICMOS			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	6 Amp	TRUE	4		NO	e4	30	260	9.9 mm		27 ns
SN65LVDT2D	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1	TTL		3.1 ns	EIA-644-A; TIA-644-A	8 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	2.5/3.3		SMALL OUTLINE	SOP8,.25	2.4 V	Line Driver or Receivers		2.4 V	1.27 mm	85 Cel	3.3 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	.02 Amp	TRUE	1		NO	e4	NOT SPECIFIED	260	4.9 mm	2 V	3.6 ns
SN75173DR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR			V.10; V.11; X.26; X.27; EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; EIA-485-A; TIA-485-A	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	.02 Amp	TRUE	4		NO	e4	30	260	9.9 mm		35 ns
SN75ALS197DRE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR			V.10; V.11; X.26; X.27	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	16 Amp	TRUE	4		NO	e4	30	260	9.9 mm		22 ns
THS6072IDGNRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	HTSSOP	SQUARE		PLASTIC/EPOXY	YES	16.5 V	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	15 V		+-5/+-15	-15 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		4.5 V	.65 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.07 mm	3 mm	Not Qualified			2	ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO	e4	30	260	3 mm		0 ns
DS34C86TMX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	6 Amp		4			e0	20	235	9.9 mm		30 ns
DS90LV028AQMA/NOPB	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	2	CMOS	AEC-Q100		EIA-644; TIA-644	9 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	125 Cel	3.3 V		-40 Cel		MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.895 mm	Not Qualified	2 Amp	TRUE	2		NO	e3	30	260	4.905 mm		2.5 ns
DS90LV032ATMTC	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644	.02 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers		3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	2 Amp	TRUE	4		NO	e0		260	5 mm		3.3 ns
SN65LVDS32DR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	NOT SPECIFIED	260	9.9 mm		3 ns
SN65LVDS9637DGKR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE		PLASTIC/EPOXY	YES	3.6 V	2	CMOS			EIA-644; TIA-644	10 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified	8 Amp	TRUE	2		NO	e4	NOT SPECIFIED	260	3 mm		3 ns
SN75LBC173AD	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4	BICMOS			EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	30	260	9.9 mm		16 ns
AM26LS32CD	NXP Semiconductors	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR			EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		TRUE	4						9.9 mm		25 ns
HI-8482CT	Holt Integrated Circuits	LINE RECEIVER	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR		CERAMIC, METAL-SEALED COFIRED	NO	5.5 V	2	CMOS			ARINC 429		DIFFERENTIAL SCHMITT TRIGGER	5 V	13.2 V	5,+-12/+-15	-12 V	IN-LINE	DIP20,.3	10.8 V	Line Driver or Receivers		4.5 V	2.54 mm	125 Cel	12 V		-55 Cel		GOLD	DUAL	R-CDIP-T20		5.08 mm	7.62 mm	Not Qualified	2 Amp		2	ALSO OPERATES AT +/-15 V SUPPLY	NO	e4			25.4 mm		0 ns
AM26LS32AIN	Texas Instruments	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	4	BIPOLAR			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers		4.75 V	2.54 mm	85 Cel	5 V	3-STATE	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T16	1	5.08 mm	7.62 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	NOT SPECIFIED	260	19.305 mm		35 ns
AM26LV32CDG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4	BICMOS			EIA-422-B; TIA-422-B; V.11	17 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	70 Cel	3.3 V		0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	5 Amp		4		NO	e4	30	260	9.9 mm		20 ns
PI90LV02TEX	Diodes Incorporated	LINE RECEIVER	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	2	CMOS			EIA-644; TIA-644	7 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37		Line Driver or Receivers		3 V	.95 mm	85 Cel			-40 Cel		MATTE TIN	DUAL	R-PDSO-G5	1	1.45 mm	1.625 mm	Not Qualified	8 Amp		2			e3			2.9 mm		3.2 ns
SN65LVDS33D	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4	BICMOS			EIA-644; TIA-644	23 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	TRUE	4		NO	e4	30	260	9.9 mm		6 ns
SN65LVDS9637DGNR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	HTSSOP	SQUARE		PLASTIC/EPOXY	YES	3.6 V	2	CMOS			EIA-644; TIA-644	10 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-G8	1	1.07 mm	3 mm	Not Qualified	8 Amp	TRUE	2		NO	e4	NOT SPECIFIED	260	3 mm		3 ns
SN75173N	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	4	BIPOLAR			V.10; V.11; X.26; X.27; EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; EIA-485-A; TIA-485-A	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers		4.75 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	.02 Amp	TRUE	4		NO	e4			19.305 mm		35 ns
DS90C402MX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	2	CMOS			EIA-644; TIA-644	10 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	2 Amp		2		NO	e0	20	235	4.9 mm		6 ns
DS90C402MX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	2	CMOS			EIA-644; TIA-644	10 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	5 V		-40 Cel		MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	2 Amp		2		NO	e3	30	260	4.9 mm		6 ns
HI-8454PSIF	Holt Integrated Circuits	LINE RECEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	4				ARINC 429	20 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25				3 V	.65 mm	85 Cel			-40 Cel		MATTE TIN	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm				4		NO	e3	40	260	6.5 mm		300 ns
SN75LBC173ADR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4	BICMOS			EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	30	260	9.9 mm		16 ns
AM26C32CDBR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	4	BICMOS			V.10; V.11; EIA-422-B; EIA-423-B		DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V			SMALL OUTLINE, SHRINK PITCH		4.5 V			4.5 V	.65 mm	70 Cel	5 V		0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified			1		NO	e4	NOT SPECIFIED	260	6.2 mm		27 ns
DS90LT012AHMF/NOPB	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	GULL WING	5	LSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-644-A; TIA-644-A	9 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	2.7 V	Line Driver or Receivers	.00002 Amp	2.7 V	.95 mm	125 Cel	3.3 V		-40 Cel		Matte Tin (Sn)	DUAL	R-PDSO-G5	1	1.22 mm	1.6 mm	Not Qualified	2 Amp	TRUE	1		NO	e3	NOT SPECIFIED	260	2.92 mm		3.5 ns
ISL3281EIHZ-T	Renesas Electronics	LINE RECEIVER	INDUSTRIAL	GULL WING	6	LSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	1	BICMOS			EIA-485; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, LOW PROFILE, SHRINK PITCH					3 V	.95 mm	85 Cel			-40 Cel		MATTE TIN	DUAL	R-PDSO-G6	2	1.45 mm	1.6 mm				1		NO	e3	30	260	2.9 mm		60 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.