14 Line Drivers & Receivers 2,025

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN75108AJP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR				30 mA		5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T14					16 Amp										25 ns
SN75182N1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR				14 mA		5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T14				Not Qualified	16 Amp										45 ns
LT1030CNR	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR								+-5/+-15		IN-LINE	DIP14,.3		Line Driver or Receivers	.00002 Amp		2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDIP-T14				Not Qualified					NO					3.3 V
SN75107AJ-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	1	BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V			-5 V	IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified		TRUE	2	ADDITIONAL COMMON STROBE INPUT					19.56 mm		25 ns
SN75159NSRE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR		25 ns	EIA-422-B; TIA-422-B; V.11		GATED	5 V		5		SMALL OUTLINE	SOP14,.3		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	2		DUAL	R-PDSO-G14		2 mm	5.3 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	2 V	0 ns
SN75107ANP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR				30 mA		5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T14					16 Amp										25 ns
SN65LVDS180IDR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1				EIA-422; EIA-485		DIFFERENTIAL	3.3 V				SMALL OUTLINE						1.27 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified			1		YES				8.65 mm
SN65C198DR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	1	BIMOS		3500 ns	EIA-232-E; V.28	.16 mA	GATED	12 V		+-5/+-12	-12 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4		DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified		INVERTED		2 SINGLE INPUT DRIVERS	NO		NOT SPECIFIED	NOT SPECIFIED	8.65 mm	8 V	0 ns
THS6093CPWP	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	7 V	2				GENERAL PURPOSE		DIFFERENTIAL	5 V		12	-5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25		Line Driver or Receivers		2.5 V	.65 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	2	1.2 mm	4.4 mm	Not Qualified				ALSO OPERATES AT 5V TO 14V SINGLE SUPPLY; LOW POWER SHUTDOWN MODE AVAILABLE	NO	e4	30	260	5 mm		0 ns
SN75142AN	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR				35 mA		5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T14				Not Qualified	16 Amp										35 ns
SN75183NSE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR		16 ns			GATED	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm	5.3 mm	Not Qualified					YES	e4	30	260	10.2 mm
SN75107AN3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR				30 mA		5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T14					16 Amp										25 ns
MC1489AN3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR				26 mA		5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T14					10 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
SN75159J-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	1	BIPOLAR		20 ns	EIA-422-A	65 mA	GATED	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	1		DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.56 mm		0 ns
SN75207BNSE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR					DIFFERENTIAL	5 V			-5 V	SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm	5.3 mm	Not Qualified			2			e4	30	260	10.2 mm		20 ns
SN75189AN-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		1	BIPOLAR			EIA-232-C	26 mA	SCHMITT TRIGGER	5 V				IN-LINE						2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					19.305 mm		85 ns
THS6093CD	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	7 V	2				GENERAL PURPOSE		DIFFERENTIAL	5 V		12	-5 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		2.5 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified				ALSO OPERATES AT 5V TO 14V SINGLE SUPPLY; LOW POWER SHUTDOWN MODE AVAILABLE	NO		NOT SPECIFIED	NOT SPECIFIED	8.65 mm		0 ns
SN65LVDM180PW	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		2.7 ns	GENERAL PURPOSE	12 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.2 mm	4.4 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	5 mm	.247 V	4.5 ns
THS6093CDR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	7 V	2				GENERAL PURPOSE		DIFFERENTIAL	5 V		12	-5 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		2.5 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified				ALSO OPERATES AT 5V TO 14V SINGLE SUPPLY; LOW POWER SHUTDOWN MODE AVAILABLE	NO		NOT SPECIFIED	NOT SPECIFIED	8.65 mm		0 ns
MC1489J	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR				26 mA		5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T14				Not Qualified	10 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
5962-8688901DA	Texas Instruments	LINE DRIVER	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	15 V	4	BIPOLAR	MIL-PRF-38535	350 ns	EIA-232-E; TIA-232-E; V.28	34 mA	GATED	9 V	15 V	+-9	-9 V	FLATPACK	FL14,.3	7.5 V	Line Driver or Receivers	.00001 Amp	7.5 V	1.27 mm	125 Cel	9 V		-55 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-GDFP-F14		2.03 mm	6.285 mm	Qualified				1 SINGLE INPUT DRIVER	NO	e0	NOT SPECIFIED	NOT SPECIFIED	9.21 mm	12 V	0 ns
SN65C188N-00	Texas Instruments	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	15 V	1	BIMOS		3500 ns	EIA-232-D	.16 mA	GATED	12 V			-12 V	IN-LINE					4.5 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	4		DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER	NO				19.305 mm
SN75143N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR				35 mA		5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T14					16 Amp										35 ns
SN75183J-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	1	BIPOLAR		16 ns	GENERAL PURPOSE	36 mA	GATED	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	2		DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.56 mm		0 ns
LT1030CD	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	4	BIPOLAR			EIA-232-F; TIA-232-F	.1 mA	STANDARD	12 V	15 V	+-5/+-15	-12 V	SMALL OUTLINE	SOP14,.25	5 V	Line Driver or Receivers	.00002 Amp	5 V	1.27 mm	70 Cel	12 V	3-STATE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	2	1.75 mm	3.9 mm	Not Qualified	.02 Amp	INVERTED			NO	e4	NOT SPECIFIED	260	8.65 mm	3.3 V	0 ns
SN75207BNP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR				30 mA		5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T14					16 Amp										35 ns
MC1489NSLE	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.05 V	1	BIPOLAR			V.28; EIA-232-E	26 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.3		Line Driver or Receivers		4.95 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G14		2 mm	5.3 mm	Not Qualified	10 Amp	INVERTED	4	RESPONSE CONTROL			NOT SPECIFIED	NOT SPECIFIED	10.2 mm		85 ns
THS6022CPWPRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	16 V	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	15 V	16 V		-15 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	4.5 V			4.5 V	.65 mm	70 Cel	15 V	DIFFERENTIAL	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	2	1.2 mm	4.4 mm	Not Qualified		COMPLEMENTARY		ALSO OPERATES AT 9V TO 32V SINGLE SUPPLY	NO	e4	30	260	5 mm		0 ns
SN75189DRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR			EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP14,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	5 V	OPEN-COLLECTOR	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	10 Amp	TRUE	4	RESPONSE CONTROL	NO	e4	30	260	8.65 mm		85 ns
SN65MLVD207DR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		2.4 ns	EIA-899; TIA-899	24 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP14,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	8.65 mm	.48 V	6 ns
SN75C188N-10	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	15 V	1	BIMOS		3500 ns	EIA-232-D	.16 mA	GATED	12 V			-12 V	IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	4		DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER	NO				19.305 mm
SN75107ANE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V	5.25 V	+-5	-5 V	IN-LINE	DIP14,.3	4.75 V	Line Driver or Receivers		4.75 V	2.54 mm	70 Cel	5 V		0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified	.075 Amp		2	ADDITIONAL COMMON STROBE INPUT	NO	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm		25 ns
SN75ALS180D-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR		13 ns	V.11; X.27; EIA-422-A; EIA-485	30 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	1		DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY	1	TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES				8.65 mm		19 ns
SN75C188D	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	4	BIMOS		3500 ns	EIA-232-E; TIA-232-E; V.28	.16 mA	STANDARD	12 V	15 V	+-12	-12 V	SMALL OUTLINE	SOP14,.25	4.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	.01 Amp	INVERTED		1 SINGLE INPUT DRIVER	NO	e4	NOT SPECIFIED	260	8.65 mm	8 V	0 ns
SN65C189NSLE	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	1	BIPOLAR			EIA-232-E; V.28	.7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.3		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel			DUAL	R-PDSO-G14		2 mm	5.3 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL			NOT SPECIFIED	NOT SPECIFIED	10.2 mm		6000 ns
SN75C189ADBRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	4	BIPOLAR			EIA-232-F; TIA-232-F; V.28	.7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP14,.3		Line Driver or Receivers		4.5 V	.65 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm	5.3 mm	Not Qualified	3.2 Amp		4	RESPONSE CONTROL	NO	e4	30	260	6.2 mm		6000 ns
SN75189APWR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4			85 ns	EIA-232-F; TIA-232-F; V.28		SCHMITT TRIGGER	5 V	5.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		4.5 V			4.5 V	.65 mm	70 Cel	5 V		0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.2 mm	4.4 mm				4		NO	e4	30	260	5 mm		85 ns
SN75189NSLE-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	BIPOLAR			EIA-232-C	26 mA	SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G14		2 mm	5.3 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					10.2 mm		85 ns
LT1030CDR-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	1	BIPOLAR			EIA-232-D	1 mA	STANDARD	12 V			-12 V	SMALL OUTLINE					5 V	1.27 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified		INVERTED			NO				8.65 mm		0 ns
SN75C188NS	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	4	BIMOS		3500 ns	EIA-232-E; V.28		GATED	12 V			-12 V	SMALL OUTLINE					4.5 V	1.27 mm	70 Cel			0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm	5.3 mm	Not Qualified					NO	e4	30	260	10.2 mm
SN75208BNP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR				30 mA		5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T14					16 Amp										35 ns
SN75112DR-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR		15 ns	GENERAL PURPOSE	40 mA	GATED	5 V			-5 V	SMALL OUTLINE					4.75 V		70 Cel		OPEN-COLLECTOR	0 Cel	2		DUAL	R-PDSO-G14				Not Qualified		COMPLEMENTARY		HIGH DRIVE	YES
SN75C189ANSRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	4	BIPOLAR			EIA-232-F; TIA-232-F; V.28	.7 mA	SCHMITT TRIGGER	5 V	6 V	5		SMALL OUTLINE	SOP14,.3	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm	5.3 mm	Not Qualified	3.2 Amp	TRUE	4	RESPONSE CONTROL	NO	e4	30	260	10.2 mm		6000 ns
5962-8688802DA	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	4	BIPOLAR	MIL-STD-883		EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V	5.5 V	5		FLATPACK	FL14,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	125 Cel	5 V		-55 Cel		Tin/Lead (Sn/Pb)	DUAL	R-GDFP-F14		2.03 mm	6.285 mm	Qualified	8.3 Amp		4	RESPONSE CONTROL	NO	e0	NOT SPECIFIED	NOT SPECIFIED	9.21 mm		85 ns
SN75159NS	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR		20 ns	V.11; EIA-422-B		GATED	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm	5.3 mm	Not Qualified					YES	e4			10.2 mm
SN65ALS180D-00	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR		13 ns	V.11; X.27; EIA-422-A; EIA-485	30 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	1		DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY	1	TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES				8.65 mm		19 ns
SN75208BJ	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR				30 mA		5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T14				Not Qualified	16 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
SN75C188DBLE	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	4	BIMOS		3500 ns	EIA-232-E; TIA-232-E; V.28	.16 mA	STANDARD	12 V		+-12	-12 V	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3		Line Driver or Receivers	.00001 Amp	4.5 V	.65 mm	70 Cel		TOTEM-POLE	0 Cel	4		DUAL	R-PDSO-G14		2 mm	5.3 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER	NO		NOT SPECIFIED	NOT SPECIFIED	6.2 mm	8 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.