14 Line Drivers & Receivers 2,025

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN75108AD	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V	5.25 V	+-5	-5 V	SMALL OUTLINE	SOP14,.25	4.75 V	Line Driver or Receivers	.000075 Amp	4.75 V	1.27 mm	70 Cel	5 V	OPEN-COLLECTOR	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO	e4	NOT SPECIFIED	260	8.65 mm		25 ns
DS14C88N/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	12.6 V	4	CMOS		6000 ns	EIA-232-D; V.28		GATED	9 V		+-4.5/+-12	-9 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00001 Amp	4.5 V	2.54 mm	70 Cel			0 Cel	4	MATTE TIN	DUAL	R-PDIP-T14	1	5.334 mm	7.62 mm	Not Qualified				1 SINGLE INPUT DRIVER	NO	e3			19.05 mm	6 V	0 ns
SN75107BJ4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR				30 mA		5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T14					16 Amp										25 ns
THS6043CPWPRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V			-12 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					5 V	.65 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	2	1.2 mm	4.4 mm	Not Qualified				ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO	e4	30	260	5 mm		0 ns
SN75183N1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR		18 ns				5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers	.00012 Amp		2.54 mm	70 Cel			0 Cel	2		DUAL	R-PDIP-T14				Not Qualified					YES					1.3 V
SN75C189ADR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	4	BIPOLAR			EIA-232-F; TIA-232-F; V.28	.7 mA	SCHMITT TRIGGER	5 V	6 V	5		SMALL OUTLINE	SOP14,.25	4.5 V	Line Driver or Receivers	.0083 Amp	4.5 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	3.2 Amp	INVERTED	4	RESPONSE CONTROL	NO	e4	NOT SPECIFIED	260	8.65 mm		6000 ns
MC1489AD-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	BIPOLAR			EIA-232-C	26 mA	SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					8.65 mm		85 ns
SN75109AN-10	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR		15 ns	GENERAL PURPOSE	30 mA	GATED	5 V			-5 V	IN-LINE					4.75 V	2.54 mm	70 Cel		OPEN-COLLECTOR	0 Cel	2		DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.305 mm		0 ns
SN75189DE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR			EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	10 Amp	INVERTED	4	RESPONSE CONTROL	NO	e4	30	260	8.65 mm		85 ns
SN75C189NSE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	4	BIPOLAR			EIA-232-F; V.28		SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm	5.3 mm	Not Qualified			4		NO	e4	30	260	10.2 mm		6000 ns
THS6093CDG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	7 V	2				GENERAL PURPOSE		DIFFERENTIAL	5 V		12	-5 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		2.5 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified				ALSO OPERATES AT 5V TO 14V SINGLE SUPPLY; LOW POWER SHUTDOWN MODE AVAILABLE	NO		NOT SPECIFIED	NOT SPECIFIED	8.65 mm		0 ns
SN75183DE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR		16 ns	GENERAL PURPOSE	36 mA	GATED	5 V	5.25 V	5		SMALL OUTLINE	SOP14,.25	4.75 V	Line Driver or Receivers	.00012 Amp	4.75 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	.12 Amp	COMPLEMENTARY			YES	e4	30	260	8.65 mm	1.3 V	0 ns
THS6053CPWPRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	16.5 V	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25		Line Driver or Receivers		4.5 V	.65 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	2	1.2 mm	4.4 mm	Not Qualified				ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO	e4	30	260	5 mm		0 ns
SN75107BN	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V	5.25 V	+-5	-5 V	IN-LINE	DIP14,.3	4.75 V	Line Driver or Receivers	.000075 Amp	4.75 V	2.54 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm		25 ns
SN75142NP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR				35 mA		5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T14					16 Amp										35 ns
SN75182J-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2	BIPOLAR			GENERAL PURPOSE	28 mA	DIFFERENTIAL	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified		TRUE	1	BUILT-IN LINE TERMINATION; RESPONSE CONTROL					19.56 mm		45 ns
DS14C89AMX	Texas Instruments	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		4	CMOS			EIA-232-E; TIA-232-E; V.28		SCHMITT TRIGGER					SMALL OUTLINE						1.27 mm	75 Cel			0 Cel		TIN LEAD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified			4			e0	20	235	8.65 mm		6500 ns
SN75159D-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR		20 ns	EIA-422-A	65 mA	GATED	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	1		DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES				8.65 mm		0 ns
SN75112N-10	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR		15 ns	GENERAL PURPOSE	40 mA	GATED	5 V			-5 V	IN-LINE					4.75 V	2.54 mm	70 Cel		OPEN-COLLECTOR	0 Cel	2		DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY		HIGH DRIVE	YES				19.305 mm
DS1489AJ/A+	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR				26 mA		5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel		Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T14					10 Amp					e0					85 ns
SN75188D-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	1	BIPOLAR		175 ns	EIA-232-C	34 mA	GATED	9 V			-9 V	SMALL OUTLINE					7.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	4		DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER; PROGRAMMABLE SLEW RATE	NO				8.65 mm		0 ns
SN75107AD-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V			-5 V	SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified		TRUE	2	ADDITIONAL COMMON STROBE INPUT					8.65 mm		25 ns
SN75188NSRE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	4	BIPOLAR		350 ns	EIA-232-E; TIA-232-E; V.28		GATED	9 V		+-9	-9 V	SMALL OUTLINE	SOP14,.3		Line Driver or Receivers	.00001 Amp	7.5 V	1.27 mm	70 Cel			0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm	5.3 mm	Not Qualified				1 SINGLE INPUT DRIVER	NO	e4	30	260	10.2 mm	12 V	0 ns
SN75107BN-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V			-5 V	IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		TRUE	2	ADDITIONAL COMMON STROBE INPUT					19.305 mm		25 ns
SN75159DG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR		25 ns	EIA-422-B; TIA-422-B; V.11	65 mA	GATED	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	8.65 mm	2 V	0 ns
SN75C189DRE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	4	BIPOLAR			EIA-232-F; TIA-232-F; V.28	.7 mA	SCHMITT TRIGGER	5 V	6 V	5		SMALL OUTLINE	SOP14,.25	4.5 V	Line Driver or Receivers	.0083 Amp	4.5 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	3.2 Amp	INVERTED	4	RESPONSE CONTROL	NO	e4	NOT SPECIFIED	260	8.65 mm		6000 ns
SN75182N-10	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2	BIPOLAR			GENERAL PURPOSE	28 mA	DIFFERENTIAL	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		TRUE	1	BUILT-IN LINE TERMINATION; RESPONSE CONTROL					19.305 mm		45 ns
DS91C180TMA	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			5.5 ns	EIA-899; TIA-899		STANDARD	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G14	1	1.753 mm	3.899 mm	Not Qualified			1		YES	e0	20	235	8.6235 mm		7.5 ns
5962-9321101MCX	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	15 V	2				GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	10 V				IN-LINE					4.5 V		125 Cel			-55 Cel			DUAL	R-GDIP-T14				Not Qualified			2								150 ns
SN75188DE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	4	BIPOLAR		350 ns	EIA-232-E; TIA-232-E; V.28	34 mA	GATED	9 V	15 V	+-9	-9 V	SMALL OUTLINE	SOP14,.25	7.5 V	Line Driver or Receivers	.00001 Amp	7.5 V	1.27 mm	70 Cel	9 V	TOTEM-POLE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER	NO	e4	NOT SPECIFIED	260	8.65 mm	12 V	0 ns
SN75107N	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR				30 mA		5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T14				Not Qualified	16 Amp										25 ns
MC1488N-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	15 V	1	BIPOLAR		175 ns	EIA-232-C	34 mA	GATED	9 V			-9 V	IN-LINE					7.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	4		DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER; PROGRAMMABLE SLEW RATE	NO				19.305 mm
SN75189ANSLE-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	BIPOLAR			EIA-232-C	26 mA	SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G14		2 mm	5.3 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					10.2 mm		85 ns
MC1489NSLE-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	BIPOLAR			EIA-232-C	26 mA	SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G14		2 mm	5.3 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					10.2 mm		85 ns
SN75C189DBLE	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	4	BIPOLAR			EIA-232-F; V.28	.7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP14,.3		Line Driver or Receivers		4.5 V	.65 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G14		2 mm	5.3 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL	NO		NOT SPECIFIED	NOT SPECIFIED	6.2 mm		6000 ns
SN75ALS126D	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.95 V	2	BIPOLAR		28 ns	IBM 360/370		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00004 Amp	4.5 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified					NO		NOT SPECIFIED	NOT SPECIFIED	8.65 mm	2.96 V	0 ns
THS6053CDG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	16.5 V	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified				ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	8.65 mm		0 ns
SN75LBC180NE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BICMOS		18 ns	EIA-485; ISO 8482	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers	.0001 Amp	4.75 V	2.54 mm	70 Cel			0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified	8 Amp		1	TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e4			19.305 mm	1.5 V	33 ns
SN65HVD55DG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		230 ns	EIA-485-A; TIA-485-A	8 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP14,.25	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	1	SIGNALING RATE 1 MBPS	YES	e4	NOT SPECIFIED	260	8.65 mm	1.7 V	60 ns
SN75C198DB-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	1	BIMOS		3500 ns	EIA-232-D	.16 mA	GATED	12 V			-12 V	SMALL OUTLINE, SHRINK PITCH					4.5 V	.65 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDSO-G14		2 mm	5.3 mm	Not Qualified		INVERTED		2 SINGLE INPUT DRIVERS	NO				6.2 mm
THS6053IDG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	16.5 V	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified				ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO	e4	30	260	8.65 mm		0 ns
DS3603N	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	BIPOLAR					DIFFERENTIAL	5 V			-5 V	IN-LINE					4.5 V	2.54 mm	125 Cel			-55 Cel			DUAL	R-PDIP-T14		5.08 mm	7.62 mm				2	PLUS 3V AND -3V INPUT COMMON MODE VOLTAGE					19.175 mm		25 ns
SN65C189AN-00	Texas Instruments	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	6 V	1	BIPOLAR			EIA-232-D	.7 mA	SCHMITT TRIGGER	5 V				IN-LINE					4.5 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel			DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					19.305 mm		6000 ns
SN65C189N-00	Texas Instruments	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	6 V	1	BIPOLAR			EIA-232-D	.7 mA	SCHMITT TRIGGER	5 V				IN-LINE					4.5 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel			DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					19.305 mm		6000 ns
5962-8754701DX	Texas Instruments	LINE DRIVER	MILITARY	FLAT	14	QFF	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	2	BIPOLAR	MIL-STD-883	25 ns	V.35		GATED	5 V	5.25 V		-5 V	FLATPACK		4.75 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	2	TIN LEAD	DUAL	R-GDFP-F14		2.03 mm	6.285 mm	Qualified				HIGH DRIVE	YES	e0	NOT SPECIFIED	NOT SPECIFIED	9.21 mm
MC1489N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR				26 mA		5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T14					10 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
SN65C198N-10	Texas Instruments	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	15 V	1	BIMOS		3500 ns	EIA-232-D	.16 mA	GATED	12 V			-12 V	IN-LINE					4.5 V	2.54 mm	85 Cel		3-STATE	-40 Cel	4		DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		INVERTED		2 SINGLE INPUT DRIVERS	NO				19.305 mm
DS91D180TMAX	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			5.5 ns	EIA-899; TIA-899	29.5 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.000015 Amp	3 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		1		YES	e0	20	235	8.65 mm	.48 V	7.5 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.