14 Line Drivers & Receivers 2,025

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN75109ANP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR		15 ns				5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel		CONSTANT-CURRENT	0 Cel	2		DUAL	R-PDIP-T14										YES		NOT SPECIFIED	NOT SPECIFIED			0 ns
SN75C189ANSE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	4		BIPOLAR			EIA-232-F; V.28		SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm		5.3 mm	Not Qualified			4		NO	e4	30	260	10.2 mm		6000 ns
SN65C188DBLE-00	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	1		BIMOS		3500 ns	EIA-232-D	.16 mA	GATED	12 V			-12 V	SMALL OUTLINE, SHRINK PITCH					4.5 V	.65 mm	85 Cel		TOTEM-POLE	-40 Cel	4		DUAL	R-PDSO-G14		2 mm		5.3 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER	NO				6.2 mm
SN75ALS180N-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR		13 ns	V.11; X.27; EIA-422-A; EIA-485	30 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	1		DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY	1	TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES				19.305 mm		19 ns
SN75C189ANSR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	4		BIPOLAR			EIA-232-F; TIA-232-F; V.28	.7 mA	SCHMITT TRIGGER	5 V	6 V	5		SMALL OUTLINE	SOP14,.3	4.5 V	Line Driver or Receivers	.0083 Amp	4.5 V	1.27 mm	70 Cel	5 V		0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	2 mm		5.3 mm	Not Qualified	3.2 Amp		4	RESPONSE CONTROL	NO	e4	NOT SPECIFIED	260	10.2 mm		6000 ns
DS36C200IMT	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		CMOS		5.5 ns	IEEE 1394	17 mA	DIFFERENTIAL	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25		Line Driver or Receivers	.00001 Amp	4.5 V	.65 mm	85 Cel			-40 Cel	2	Tin/Lead (Sn85Pb15)	DUAL	R-PDSO-G14	1	1.1 mm		4.4 mm	Not Qualified	2 Amp		2		YES	e0	40	260	5 mm	.172 V	10 ns
SN75107BNSRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V		+-5	-5 V	SMALL OUTLINE	SOP14,.3		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm		5.3 mm	Not Qualified	16 Amp		2	ADDITIONAL COMMON STROBE INPUT	NO	e4	30	260	10.2 mm		25 ns
SN75112DRE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		15 ns	V.35		GATED	5 V		+-5	-5 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel		CONSTANT-CURRENT	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified					YES	e4	30	260	8.65 mm		0 ns
SN75207BNS	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR					DIFFERENTIAL	5 V			-5 V	SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm		5.3 mm	Not Qualified			2			e4	30	260	10.2 mm		20 ns
5962-8688901CA	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	15 V	4		BIPOLAR	MIL-PRF-38535	350 ns	EIA-232-E; TIA-232-E; V.28	34 mA	GATED	9 V	15 V	+-9	-9 V	IN-LINE	DIP14,.3	7.5 V	Line Driver or Receivers	.00001 Amp	7.5 V	2.54 mm	125 Cel	9 V		-55 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-GDIP-T14		5.08 mm		7.62 mm	Qualified				1 SINGLE INPUT DRIVER	NO	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm	12 V	0 ns
SN75182DRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		BIPOLAR			GENERAL PURPOSE	14 mA	DIFFERENTIAL	5 V		5		SMALL OUTLINE	TSSOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified	16 Amp		2	BUILT-IN LINE TERMINATION; RESPONSE CONTROL	NO	e4	30	260	8.65 mm		45 ns
SN75108BN-10	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V			-5 V	IN-LINE					4.75 V	2.54 mm	70 Cel		OPEN-COLLECTOR	0 Cel			DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		TRUE	2	ADDITIONAL COMMON STROBE INPUT					19.305 mm		25 ns
SN65LVDS180ID	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1					EIA-422; EIA-485		DIFFERENTIAL	3.3 V				SMALL OUTLINE						1.27 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified			1		YES				8.65 mm
SN75C189ANSRE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	4		BIPOLAR			EIA-232-F; TIA-232-F; V.28	.7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.3		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm		5.3 mm	Not Qualified			4	RESPONSE CONTROL	NO	e4	30	260	10.2 mm		6000 ns
SN75107BD	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V	5.25 V	+-5	-5 V	SMALL OUTLINE	SOP14,.25	4.75 V	Line Driver or Receivers	.000075 Amp	4.75 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO	e4	NOT SPECIFIED	260	8.65 mm		25 ns
SN65LBC180ADG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BICMOS		12 ns	EIA-485-A; TIA-485-A; ISO 8482	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP14,.25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	8.65 mm	1 V	20 ns
SN75C189AN	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	6 V	4		BIPOLAR			EIA-232-F; TIA-232-F; V.28	.7 mA	SCHMITT TRIGGER	5 V	6 V	5		IN-LINE	DIP14,.3	4.5 V	Line Driver or Receivers	.0083 Amp	4.5 V	2.54 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified	3.2 Amp	INVERTED	4	RESPONSE CONTROL	NO	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm		6000 ns
5962-01-241-8072	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO				BIPOLAR				26 mA		5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T14					Not Qualified	10 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
THS6053CPWPR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	16.5 V	2	2	BIPOLAR			GENERAL PURPOSE	8 mA	DIFFERENTIAL	12 V	15 V	+-5/+-15	-12 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	5 V	Line Driver or Receivers		4.5 V	.65 mm	70 Cel	12 V	DIFFERENTIAL	0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	2	1.2 mm	.175 A	4.4 mm	Not Qualified		COMPLEMENTARY		ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO	e4	NOT SPECIFIED	260	5 mm		0 ns
SN75107BNP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR				30 mA		5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T14						16 Amp										25 ns
SN65HVD76D	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				16 ns	EIA-485	1.1 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			SMALL OUTLINE		3 V			3 V	1.27 mm	125 Cel	3.3 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	2	1.75 mm		3.9 mm				1		YES	e4	NOT SPECIFIED	260	8.65 mm		40 ns
SN75142N	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR				35 mA		5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T14					Not Qualified	16 Amp										35 ns
THS6053CDRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	16.5 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	8.65 mm		0 ns
THS6043IDRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V			-12 V	SMALL OUTLINE					5 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	8.65 mm		0 ns
SN75207N	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT			NOT SPECIFIED	NOT SPECIFIED	19.305 mm		35 ns
DS75110AN	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		2		BIPOLAR		15 ns	GENERAL PURPOSE		GATED	5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel		OPEN-COLLECTOR	0 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY		ADDITIONAL COMMON ENABLE INPUT	YES	e0			19.18 mm		0 ns
SN65ALS180N-00	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR		13 ns	V.11; X.27; EIA-422-A; EIA-485	30 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	85 Cel		3-STATE	-40 Cel	1		DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY	1	TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES				19.305 mm		19 ns
SN75183N-10	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR		16 ns	GENERAL PURPOSE	36 mA	GATED	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	1		DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.305 mm		0 ns
SN75150N	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR		2000 ns				12 V		+-12	-12 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00001 Amp		2.54 mm	70 Cel			0 Cel	2		DUAL	R-PDIP-T14					Not Qualified					NO					10 V
DS14C88TM	Texas Instruments	LINE DRIVER	COMMERCIAL EXTENDED	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	12.6 V	4		CMOS		6000 ns	EIA-232-D; V.28		GATED	9 V			-9 V	SMALL OUTLINE					4.5 V	1.27 mm	75 Cel			0 Cel	4		DUAL	R-PDSO-G14		1.753 mm		3.9 mm						NO				8.65 mm
SN75142AJ	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO				BIPOLAR				35 mA		5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T14					Not Qualified	16 Amp										35 ns
SN75208BJP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO				BIPOLAR				30 mA		5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T14						16 Amp										35 ns
SN65C189N-10	Texas Instruments	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	6 V	1		BIPOLAR			EIA-232-D	.7 mA	SCHMITT TRIGGER	5 V				IN-LINE					4.5 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel			DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					19.305 mm		6000 ns
SN75189AJ4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO				BIPOLAR				26 mA		5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T14						10 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
SN65C198N	Texas Instruments	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	15 V	1		BIMOS		3500 ns	EIA-232-E; V.28	.16 mA	GATED	12 V		+-5/+-12	-12 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00001 Amp	4.5 V	2.54 mm	85 Cel		3-STATE	-40 Cel	4		DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		INVERTED		2 SINGLE INPUT DRIVERS	NO		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	8 V	0 ns
SN75188NS	Texas Instruments	LINE DRIVER	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	4		BIPOLAR		175 ns	V.28; EIA-232-E		GATED	9 V			-9 V	SMALL OUTLINE					7.5 V	1.27 mm	125 Cel			-55 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm		5.3 mm	Not Qualified					NO	e4	30	260	10.2 mm
SN75108AJ4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO				BIPOLAR				30 mA		5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T14						16 Amp										25 ns
DS9622MW/883	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES		2		BIPOLAR	MIL-STD-883		GENERAL PURPOSE		DIFFERENTIAL	5 V		5,-10		FLATPACK	FL14,.3		Line Driver or Receivers			1.27 mm	125 Cel		TOTEM-POLE	-55 Cel		Tin/Lead (Sn/Pb)	DUAL	R-GDFP-F14		2.032 mm		6.35 mm	Not Qualified	12.4 Amp	INVERTED	2	BUILT-IN LINE TERMINATION		e0					50 ns
SN75ALS170J-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	3		BIPOLAR		13 ns	V.11; X.27; X3.131; EIA-422-A; EIA-485	90 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	1		DUAL	R-GDIP-T14		5.08 mm		7.62 mm	Not Qualified		TRUE	1	COMMON I/O	YES				19.56 mm		19 ns
SN75142ANP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR				35 mA		5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T14						16 Amp										35 ns
SN75182DR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		BIPOLAR			GENERAL PURPOSE	28 mA	DIFFERENTIAL	5 V	5.5 V	5		SMALL OUTLINE	SOP14,.25	4.5 V	Line Driver or Receivers	.000005 Amp	4.5 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified	16 Amp	TRUE	2	BUILT-IN LINE TERMINATION; RESPONSE CONTROL	NO	e4	30	260	8.65 mm		45 ns
SN75108AJ	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	2		BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		OPEN-COLLECTOR	0 Cel			DUAL	R-GDIP-T14		5.08 mm		7.62 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO		NOT SPECIFIED	NOT SPECIFIED	19.56 mm		25 ns
SN75ALS180NE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR		13 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11		DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel			0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified	8 Amp		1	TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e4			19.305 mm	1.5 V	19 ns
THS6022IPWPG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	16 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	15 V	16 V		-15 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	4.5 V			4.5 V	.65 mm	85 Cel	15 V	DIFFERENTIAL	-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	2	1.2 mm		4.4 mm	Not Qualified		COMPLEMENTARY		ALSO OPERATES AT 9V TO 32V SINGLE SUPPLY	NO	e4	30	260	5 mm		0 ns
5962-8754701DA	Texas Instruments	LINE DRIVER	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	2		BIPOLAR	MIL-PRF-38535	15 ns	V.35	35 mA	GATED	5 V	5.5 V	+-5	-5 V	FLATPACK	FL14,.3	4.5 V	Line Driver or Receivers	.00004 Amp	4.5 V	1.27 mm	125 Cel	5 V	CONSTANT-CURRENT	-55 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-GDFP-F14		2.03 mm		6.285 mm	Qualified	.04 Amp	COMPLEMENTARY		HIGH DRIVE	YES	e0	NOT SPECIFIED	NOT SPECIFIED	9.21 mm	2 V	0 ns
SN75183NSRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		16 ns	GENERAL PURPOSE		GATED	5 V		5		SMALL OUTLINE	SOP14,.3		Line Driver or Receivers	.00012 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm		5.3 mm	Not Qualified					YES	e4	30	260	10.2 mm	1.4 V	0 ns
THS6042IPWP	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2					GENERAL PURPOSE		DIFFERENTIAL	12 V			-12 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					5 V	.65 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G14		1.2 mm		4.4 mm	Not Qualified				CAN ALSO OPERATE WITH 10V TO 30V SINGLE SUPPLY	NO				5 mm		0 ns
SN75207BNE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified	16 Amp		2	ADDITIONAL COMMON STROBE INPUT	NO	e4			19.305 mm		35 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.