14 Line Drivers & Receivers 2,025

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN75107BDRE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V	5.25 V	+-5	-5 V	SMALL OUTLINE	SOP14,.25	4.75 V	Line Driver or Receivers	.000075 Amp	4.75 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO	e4	NOT SPECIFIED	260	8.65 mm		25 ns
SN75189NSRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		BIPOLAR			EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.3		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm		5.3 mm	Not Qualified	10 Amp		4	RESPONSE CONTROL	NO	e4	30	260	10.2 mm		85 ns
SN65MLVD202D	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				4.1 ns	EIA-899; TIA-899	26 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP14,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	8.65 mm		6.7 ns
SN65C189ANSLE-00	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	1		BIPOLAR			EIA-232-D	.7 mA	SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel			DUAL	R-PDSO-G14		2 mm		5.3 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					10.2 mm		6000 ns
SN75189AD	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		BIPOLAR			EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP14,.25	4.5 V	Line Driver or Receivers	.0083 Amp	4.5 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified	10 Amp	INVERTED	4	RESPONSE CONTROL	NO	e4	NOT SPECIFIED	260	8.65 mm		85 ns
MC1489N-10	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		1		BIPOLAR			EIA-232-C	26 mA	SCHMITT TRIGGER	5 V				IN-LINE						2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					19.305 mm		85 ns
SN75112N-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR		15 ns	GENERAL PURPOSE	40 mA	GATED	5 V			-5 V	IN-LINE					4.75 V	2.54 mm	70 Cel		OPEN-COLLECTOR	0 Cel	2		DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY		HIGH DRIVE	YES				19.305 mm
SN75208JP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO				BIPOLAR				30 mA		5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T14						16 Amp										35 ns
5962-8688801CX	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4			MIL-PRF-38535		EIA-232-C		SCHMITT TRIGGER	5 V				IN-LINE					4.5 V		125 Cel			-55 Cel			DUAL	R-GDIP-T14					Not Qualified			4		NO						127 ns
5962-01-097-5115	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO				BIPOLAR				26 mA		5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T14					Not Qualified	10 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
SN75C188NSRE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	4		BIMOS		3500 ns	EIA-232-E; TIA-232-E; V.28		STANDARD	12 V		+-12	-12 V	SMALL OUTLINE	SOP14,.3		Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	70 Cel			0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm		5.3 mm	Not Qualified				1 SINGLE INPUT DRIVER	NO	e4	30	260	10.2 mm	8 V	0 ns
SN75107AJ	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	2		BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-GDIP-T14		5.08 mm		7.62 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO		NOT SPECIFIED	NOT SPECIFIED	19.56 mm		25 ns
SN75107BDE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V		+-5	-5 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO	e4	30	260	8.65 mm		25 ns
SN75109ADR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR		15 ns	GENERAL PURPOSE	30 mA	GATED	5 V		+-5	-5 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel		OPEN-COLLECTOR	0 Cel	2		DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY			YES		NOT SPECIFIED	NOT SPECIFIED	8.65 mm		0 ns
SN75183N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR		18 ns				5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers	.00012 Amp		2.54 mm	70 Cel			0 Cel	2		DUAL	R-PDIP-T14										YES					1.3 V
5962-8754701CA	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2		BIPOLAR	MIL-PRF-38535	15 ns	V.35	35 mA	GATED	5 V	5.5 V	+-5	-5 V	IN-LINE	DIP14,.3	4.5 V	Line Driver or Receivers	.00004 Amp	4.5 V	2.54 mm	125 Cel	5 V	CONSTANT-CURRENT	-55 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-GDIP-T14		5.08 mm		7.62 mm	Qualified	.04 Amp	COMPLEMENTARY		HIGH DRIVE	YES	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm	2 V	0 ns
SN75112D-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR		15 ns	GENERAL PURPOSE	40 mA	GATED	5 V			-5 V	SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		OPEN-COLLECTOR	0 Cel	2		DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY		HIGH DRIVE	YES				8.65 mm
SN75110ANE4	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR		15 ns	V.35		GATED	5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00004 Amp	4.75 V	2.54 mm	70 Cel		CONSTANT-CURRENT	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified					YES	e4			19.305 mm		0 ns
SN75188N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR		350 ns				9 V		+-9	-9 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00001 Amp		2.54 mm	70 Cel			0 Cel	4		DUAL	R-PDIP-T14										NO					12 V
5962-00-163-5701	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO				BIPOLAR		15 ns				5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel		CONSTANT-CURRENT	0 Cel	2		DUAL	R-XDIP-T14					Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED			0 ns
SN75189ANE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4		BIPOLAR			EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified	10 Amp	INVERTED	4	RESPONSE CONTROL	NO	e4			19.305 mm		85 ns
SN75142N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR				35 mA		5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T14						16 Amp										35 ns
SN75C188DB-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	1		BIMOS		3500 ns	EIA-232-D	.16 mA	GATED	12 V			-12 V	SMALL OUTLINE, SHRINK PITCH					4.5 V	.65 mm	70 Cel		TOTEM-POLE	0 Cel	4		DUAL	R-PDSO-G14		2 mm		5.3 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER	NO				6.2 mm
5962-01-035-6444	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR		2000 ns				12 V		+-12	-12 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00001 Amp		2.54 mm	70 Cel			0 Cel	2		DUAL	R-PDIP-T14					Not Qualified					NO		NOT SPECIFIED	NOT SPECIFIED		10 V	0 ns
SN75112NP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR		15 ns				5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel		CONSTANT-CURRENT	0 Cel	2		DUAL	R-PDIP-T14										YES
SN75189ANP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR				26 mA		5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T14						10 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
SN75208BD	Texas Instruments		COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES				BIPOLAR				30 mA		5 V		+-5	-5 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers			1.27 mm	70 Cel			0 Cel			DUAL	R-PDSO-G14					Not Qualified	16 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
SN65C189AN	Texas Instruments	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	6 V	1		BIPOLAR			EIA-232-E; V.28	.7 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel			DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL			NOT SPECIFIED	NOT SPECIFIED	19.305 mm		6000 ns
5962-00-481-9366	Texas Instruments		MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO				BIPOLAR		15 ns				5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	125 Cel		CONSTANT-CURRENT	-55 Cel	2		DUAL	R-XDIP-T14					Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED			0 ns
THS6093IPWPG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	7 V	2					GENERAL PURPOSE		DIFFERENTIAL	5 V	7 V	12	-5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	2.5 V	Line Driver or Receivers		2.5 V	.65 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	2	1.2 mm		4.4 mm	Not Qualified		COMPLEMENTARY		ALSO OPERATES AT 5V TO 14V SINGLE SUPPLY; LOW POWER SHUTDOWN MODE AVAILABLE	NO	e4	30	260	5 mm		0 ns
SN65LVDM180PWR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		2.7 ns	GENERAL PURPOSE	12 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.2 mm		4.4 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	5 mm	.247 V	4.5 ns
SN75207BNSR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V	5.25 V	+-5	-5 V	SMALL OUTLINE	SOP14,.3	4.75 V	Line Driver or Receivers	.000075 Amp	4.75 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm		5.3 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO	e4	30	260	10.2 mm		35 ns
SN75C189DB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	4		BIPOLAR			EIA-232-F; V.28	.7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP14,.3		Line Driver or Receivers		4.5 V	.65 mm	70 Cel			0 Cel			DUAL	R-PDSO-G14		2 mm		5.3 mm	Not Qualified			4		NO		NOT SPECIFIED	NOT SPECIFIED	6.2 mm		6000 ns
SN75C189DBR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	4		BIPOLAR			EIA-232-F; V.28		SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH					4.5 V	.65 mm	70 Cel			0 Cel			DUAL	R-PDSO-G14		2 mm		5.3 mm	Not Qualified			4		NO				6.2 mm		6000 ns
5962-9690301QCA	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2		BIPOLAR	MIL-STD-883 Class Q		GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V	5.5 V	+-5	-5 V	IN-LINE	DIP14,.3	4.5 V	Line Driver or Receivers	75 Amp	4.5 V	2.54 mm	125 Cel	5 V		-55 Cel		Tin/Lead (Sn/Pb)	DUAL	R-GDIP-T14		5.08 mm		7.62 mm	Qualified	16 Amp		2	ADDITIONAL COMMON STROBE INPUT	NO	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm		25 ns
SN65C188N-10	Texas Instruments	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	15 V	1		BIMOS		3500 ns	EIA-232-D	.16 mA	GATED	12 V			-12 V	IN-LINE					4.5 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	4		DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER	NO				19.305 mm
SN75159NSR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		25 ns	EIA-422-B; TIA-422-B; V.11		GATED	5 V		5		SMALL OUTLINE	SOP14,.3		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	2		DUAL	R-PDSO-G14		2 mm		5.3 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	2 V	0 ns
SN75143AD	Texas Instruments		COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES				BIPOLAR				35 mA		5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers			1.27 mm	70 Cel			0 Cel			DUAL	R-PDSO-G14					Not Qualified	16 Amp										35 ns
THS6043CPWP	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V	15 V		-12 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH		5 V			5 V	.65 mm	70 Cel	12 V		0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	2	1.2 mm	.35 A	4.4 mm	Not Qualified				ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO	e4	NOT SPECIFIED	260	5 mm		0 ns
SN75110AN3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR		15 ns				5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel		CONSTANT-CURRENT	0 Cel	2		DUAL	R-PDIP-T14										YES
SN65LBC180N	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BICMOS		18 ns	EIA-485; ISO 8482	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		IN-LINE	DIP14,.3	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	2.54 mm	85 Cel	5 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T14	1	5.08 mm		7.62 mm	Not Qualified	8 Amp	COMPLEMENTARY	1	TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e4	NOT SPECIFIED	260	19.305 mm	1.1 V	33 ns
SN75207J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO				BIPOLAR				30 mA		5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T14						16 Amp										35 ns
SN75C189N-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	6 V	1		BIPOLAR			EIA-232-D	.7 mA	SCHMITT TRIGGER	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					19.305 mm		6000 ns
5962-01-248-2324	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR				26 mA		5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T14					Not Qualified	10 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
SN65C188DBLE	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	1		BIMOS		3500 ns	EIA-232-E; V.28	.16 mA	GATED	12 V		+-12	-12 V	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3		Line Driver or Receivers	.00001 Amp	4.5 V	.65 mm	85 Cel		TOTEM-POLE	-40 Cel	4		DUAL	R-PDSO-G14		2 mm		5.3 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER	NO		NOT SPECIFIED	NOT SPECIFIED	6.2 mm	8 V	0 ns
MC1488DR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	1		BIPOLAR		175 ns	V.28; EIA-232-E		GATED	9 V			-9 V	SMALL OUTLINE					7.5 V	1.27 mm	70 Cel			0 Cel	4		DUAL	R-PDSO-G14		1.75 mm		3.9 mm					1 SINGLE INPUT DRIVER; PROGRAMMABLE SLEW RATE	NO				8.65 mm
SN65HVD61D	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1				50 ns	GENERAL PURPOSE	65 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	2.5/5,5		SMALL OUTLINE	SOP14,.25	4.5 V	Line Driver or Receivers		4.75 V	1.27 mm	100 Cel	5 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified	8 Amp	TRUE	1		NO	e4	NOT SPECIFIED	260	8.65 mm	2.4 V	50 ns
DS75110AM	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		2		BIPOLAR		15 ns	GENERAL PURPOSE		GATED	5 V		+-5	-5 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00004 Amp		1.27 mm	70 Cel		OPEN-COLLECTOR	0 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY		ADDITIONAL COMMON ENABLE INPUT	YES	e0			8.65 mm		0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.