14 Line Drivers & Receivers 2,025

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN75109AN3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR	15 ns				5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel		CONSTANT-CURRENT	0 Cel	2		DUAL	R-PDIP-T14										YES		NOT SPECIFIED	NOT SPECIFIED			0 ns
SN75207BDR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V			-5 V	SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified		TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO	e4			8.65 mm		35 ns
SN75108AN	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR		GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		OPEN-COLLECTOR	0 Cel			DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO		NOT SPECIFIED	NOT SPECIFIED	19.305 mm		25 ns
SN75189AN-10	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		1		BIPOLAR		EIA-232-C	26 mA	SCHMITT TRIGGER	5 V				IN-LINE						2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					19.305 mm		85 ns
SN75108BJ	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	2		BIPOLAR		GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		OPEN-COLLECTOR	0 Cel			DUAL	R-GDIP-T14		5.08 mm		7.62 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO		NOT SPECIFIED	NOT SPECIFIED	19.56 mm		25 ns
SN75159D	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR	25 ns	EIA-422-B; TIA-422-B; V.11	65 mA	GATED	5 V	5.25 V	5		SMALL OUTLINE	SOP14,.25	4.75 V	Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified	40 Amp	COMPLEMENTARY			YES	e4	30	260	8.65 mm	2 V	0 ns
SN75ALS181N-10	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR	20 ns	V.11; X.27; EIA-422-A; EIA-485	30 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	1		DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY	1	TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES				19.305 mm		25 ns
SN75108AD-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR		GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V			-5 V	SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		OPEN-COLLECTOR	0 Cel			DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified		TRUE	2	ADDITIONAL COMMON STROBE INPUT					8.65 mm		25 ns
MC1489ANSR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		BIPOLAR		EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.3		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel			DUAL	R-PDSO-G14		2 mm		5.3 mm	Not Qualified	10 Amp		4	RESPONSE CONTROL	NO		NOT SPECIFIED	NOT SPECIFIED	10.2 mm		85 ns
SN75188NSE4	Texas Instruments	LINE DRIVER	MILITARY	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	4		BIPOLAR	175 ns	V.28; EIA-232-E		GATED	9 V			-9 V	SMALL OUTLINE					7.5 V	1.27 mm	125 Cel			-55 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm		5.3 mm	Not Qualified					NO	e4	30	260	10.2 mm
SN75110AN-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR	15 ns	GENERAL PURPOSE	35 mA	GATED	5 V			-5 V	IN-LINE					4.75 V	2.54 mm	70 Cel		OPEN-COLLECTOR	0 Cel	2		DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY		HIGH DRIVE	YES				19.305 mm		0 ns
SN75112D	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR	15 ns	V.35	40 mA	GATED	5 V	5.25 V	+-5	-5 V	SMALL OUTLINE	SOP14,.25	4.75 V	Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel	5 V	OPEN-COLLECTOR	0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY		HIGH DRIVE	YES	e4	NOT SPECIFIED	260	8.65 mm		0 ns
DS14C88MX	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	12.6 V	4		CMOS	6000 ns	EIA-232-D; V.28		GATED	9 V		+-4.5/+-12	-9 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	70 Cel			0 Cel	4	TIN LEAD	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified				1 SINGLE INPUT DRIVER	NO	e0	20	235	8.65 mm	6 V	0 ns
SN75ALS181N-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR	20 ns	V.11; X.27; EIA-422-A; EIA-485	30 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	1		DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY	1	TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES				19.305 mm		25 ns
THS6043ID	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	12 V	15 V		-12 V	SMALL OUTLINE		5 V			5 V	1.27 mm	85 Cel	12 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	.35 A	3.9 mm	Not Qualified		TRUE		ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO	e4	NOT SPECIFIED	260	8.65 mm		0 ns
SN65LVDM180ID	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1				EIA-485		DIFFERENTIAL	3.3 V				SMALL OUTLINE						1.27 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified			1		YES				8.65 mm
THVD1512DR	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			500 ns	EIA-485-A; TIA-485-A		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.5 V		125 Cel			-40 Cel	1		DUAL	R-PDSO-G14								1		YES						60 ns
SN75107BDG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	5 V	4.25 V	+-5	-5 V	SMALL OUTLINE	SOP14,.25	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO	e4	30	260	8.65 mm		25 ns
SN65C189DBLE-00	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	1		BIPOLAR		EIA-232-D	.7 mA	SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH					4.5 V	.65 mm	85 Cel		TOTEM-POLE	-40 Cel			DUAL	R-PDSO-G14		2 mm		5.3 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					6.2 mm		6000 ns
SN75C189NSRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	4		BIPOLAR		EIA-232-F; TIA-232-F; V.28	.7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.3		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm		5.3 mm	Not Qualified			4	RESPONSE CONTROL	NO	e4	30	260	10.2 mm		6000 ns
MC1488D-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	1		BIPOLAR	175 ns	EIA-232-C	34 mA	GATED	9 V			-9 V	SMALL OUTLINE					7.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	4		DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER; PROGRAMMABLE SLEW RATE	NO				8.65 mm
SN75182DRE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		BIPOLAR		GENERAL PURPOSE	28 mA	DIFFERENTIAL	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified	16 Amp	TRUE	2	BUILT-IN LINE TERMINATION; RESPONSE CONTROL	NO	e4	30	260	8.65 mm		45 ns
DS75107BN	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR			30 mA		5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel		Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T14					Not Qualified	16 Amp					e0					25 ns
SN75159JP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO				BIPOLAR	25 ns				5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel		3-STATE	0 Cel	2		DUAL	R-XDIP-T14										YES		NOT SPECIFIED	NOT SPECIFIED		2 V	0 ns
SN75110ANSR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR	15 ns	V.35	40 mA	GATED	5 V	5.25 V	+-5	-5 V	SMALL OUTLINE	SOP14,.3	4.75 V	Line Driver or Receivers	.00008 Amp	4.75 V	1.27 mm	70 Cel	5 V	CONSTANT-CURRENT	0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	2 mm		5.3 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	10.2 mm	2 V	0 ns
SN75C189ADBLE	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	4		BIPOLAR		EIA-232-F; TIA-232-F; V.28	.7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP14,.3		Line Driver or Receivers		4.5 V	.65 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G14		2 mm		5.3 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL	NO		NOT SPECIFIED	NOT SPECIFIED	6.2 mm		6000 ns
SN75182D-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		BIPOLAR		GENERAL PURPOSE	28 mA	DIFFERENTIAL	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified		TRUE	1	BUILT-IN LINE TERMINATION; RESPONSE CONTROL					8.65 mm		45 ns
SN75108ADRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V		+-5	-5 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified	16 Amp		2	ADDITIONAL COMMON STROBE INPUT	NO	e4	30	260	8.65 mm		25 ns
THS6053CPWP	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	16.5 V	2		BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25		Line Driver or Receivers		4.5 V	.65 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G14		1.2 mm		4.4 mm	Not Qualified				ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	5 mm		0 ns
SN75110ADRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR	15 ns	V.35	35 mA	GATED	5 V		+-5	-5 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel		OPEN-COLLECTOR	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY		HIGH DRIVE	YES	e4	30	260	8.65 mm		0 ns
SN75182NSE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		BIPOLAR				DIFFERENTIAL	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm		5.3 mm	Not Qualified			2			e4	30	260	10.2 mm		45 ns
SN75183J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO				BIPOLAR	18 ns				5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers	.00012 Amp		2.54 mm	70 Cel			0 Cel	2		DUAL	R-XDIP-T14										YES					1.3 V
SN75183NSR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR	16 ns	GENERAL PURPOSE	18 mA	GATED	5 V	5.25 V	5		SMALL OUTLINE	SOP14,.3	4.75 V	Line Driver or Receivers	.00012 Amp	4.75 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm		5.3 mm	Not Qualified	.12 Amp	COMPLEMENTARY			YES	e4	30	260	10.2 mm	1.4 V	0 ns
SN75108AD	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V	5.25 V	+-5	-5 V	SMALL OUTLINE	SOP14,.25	4.75 V	Line Driver or Receivers	.000075 Amp	4.75 V	1.27 mm	70 Cel	5 V	OPEN-COLLECTOR	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO	e4	NOT SPECIFIED	260	8.65 mm		25 ns
DS14C88N/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	12.6 V	4		CMOS	6000 ns	EIA-232-D; V.28		GATED	9 V		+-4.5/+-12	-9 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00001 Amp	4.5 V	2.54 mm	70 Cel			0 Cel	4	MATTE TIN	DUAL	R-PDIP-T14	1	5.334 mm		7.62 mm	Not Qualified				1 SINGLE INPUT DRIVER	NO	e3			19.05 mm	6 V	0 ns
SN75107BJ4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO				BIPOLAR			30 mA		5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T14						16 Amp										25 ns
THS6043CPWPRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2		BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	12 V			-12 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					5 V	.65 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	2	1.2 mm		4.4 mm	Not Qualified				ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO	e4	30	260	5 mm		0 ns
SN75183N1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR	18 ns				5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers	.00012 Amp		2.54 mm	70 Cel			0 Cel	2		DUAL	R-PDIP-T14					Not Qualified					YES					1.3 V
SN75C189ADR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	4		BIPOLAR		EIA-232-F; TIA-232-F; V.28	.7 mA	SCHMITT TRIGGER	5 V	6 V	5		SMALL OUTLINE	SOP14,.25	4.5 V	Line Driver or Receivers	.0083 Amp	4.5 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified	3.2 Amp	INVERTED	4	RESPONSE CONTROL	NO	e4	NOT SPECIFIED	260	8.65 mm		6000 ns
MC1489AD-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1		BIPOLAR		EIA-232-C	26 mA	SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					8.65 mm		85 ns
SN75109AN-10	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR	15 ns	GENERAL PURPOSE	30 mA	GATED	5 V			-5 V	IN-LINE					4.75 V	2.54 mm	70 Cel		OPEN-COLLECTOR	0 Cel	2		DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.305 mm		0 ns
SN75189DE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		BIPOLAR		EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified	10 Amp	INVERTED	4	RESPONSE CONTROL	NO	e4	30	260	8.65 mm		85 ns
SN75C189NSE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	4		BIPOLAR		EIA-232-F; V.28		SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm		5.3 mm	Not Qualified			4		NO	e4	30	260	10.2 mm		6000 ns
THS6093CDG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	7 V	2				GENERAL PURPOSE		DIFFERENTIAL	5 V		12	-5 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		2.5 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 5V TO 14V SINGLE SUPPLY; LOW POWER SHUTDOWN MODE AVAILABLE	NO		NOT SPECIFIED	NOT SPECIFIED	8.65 mm		0 ns
SN75183DE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR	16 ns	GENERAL PURPOSE	36 mA	GATED	5 V	5.25 V	5		SMALL OUTLINE	SOP14,.25	4.75 V	Line Driver or Receivers	.00012 Amp	4.75 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified	.12 Amp	COMPLEMENTARY			YES	e4	30	260	8.65 mm	1.3 V	0 ns
THS6053CPWPRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	16.5 V	2		BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25		Line Driver or Receivers		4.5 V	.65 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	2	1.2 mm		4.4 mm	Not Qualified				ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO	e4	30	260	5 mm		0 ns
SN75107BN	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR		GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V	5.25 V	+-5	-5 V	IN-LINE	DIP14,.3	4.75 V	Line Driver or Receivers	.000075 Amp	4.75 V	2.54 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm		25 ns
SN75142NP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR			35 mA		5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T14						16 Amp										35 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.