20 Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN75ALS057DW-00R	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR		18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		0 Cel	4		DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified			4		NO				12.8 mm		18 ns
SN75C3223DBRE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	BIPOLAR			EIA-232	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel		0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2 mm	5.3 mm	Not Qualified	1.6 Amp		2	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	7.2 mm	10 V	0 ns
5962-7802004M2X	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4	BIPOLAR	MIL-STD-883		EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11		DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V			CHIP CARRIER		4.75 V			4.5 V	1.27 mm	125 Cel	5 V	-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Qualified			4						8.89 mm		35 ns
MAX3318CDBRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3 V	2				EIA-232	2 mA	SCHMITT TRIGGER	2.5 V	3 V	2.25/3		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	2.25 V	Line Driver or Receivers		2.25 V	.65 mm	70 Cel	2.5 V	0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G20	1	2 mm	5.3 mm	Not Qualified	.5 Amp	TRUE	2		NO	e4	NOT SPECIFIED	260	7.2 mm	7.4 V	0 ns
PMAD233JN	Analog Devices		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO							10 mA		5 V		5		IN-LINE	DIP20,.3		Line Driver or Receivers			2.54 mm	70 Cel		0 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T20				Not Qualified	1.6 Amp				NO	e0				10 V
AD8324JRQ	Analog Devices	LINE DRIVER	OTHER	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.47 V	1				GENERAL PURPOSE		STANDARD	3.3 V				SMALL OUTLINE, SHRINK PITCH					3.13 V	.635 mm	70 Cel		-25 Cel	1	TIN LEAD	DUAL	R-PDSO-G20	1	1.7526 mm	3.9116 mm	Not Qualified					YES	e0		240	8.6614 mm		0 ns
AD8328ACP-REEL7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	VQCCN	SQUARE	UNSPECIFIED	YES	5.25 V	1				GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, VERY THIN PROFILE					4.75 V	.5 mm	85 Cel		-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N20		1 mm	4 mm	Not Qualified					YES	e0			4 mm		0 ns
AD8328ACP	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	VQCCN	SQUARE	UNSPECIFIED	YES	5.25 V	1				GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, VERY THIN PROFILE					4.75 V	.5 mm	85 Cel		-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N20	3	1 mm	4 mm	Not Qualified					YES	e0		240	4 mm		0 ns
AD8327ARU-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1				GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.75 V	.65 mm	85 Cel		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G20	1	1.1 mm	4.4 mm	Not Qualified					NO	e0		240	6.5 mm		0 ns
AD8324JRQZ-REEL7	Analog Devices	LINE DRIVER	OTHER	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.47 V	1				GENERAL PURPOSE		STANDARD	3.3 V				SMALL OUTLINE, SHRINK PITCH					3.13 V	.635 mm	70 Cel		-25 Cel	1	MATTE TIN	DUAL	R-PDSO-G20	1	1.7526 mm	3.9116 mm	Not Qualified					YES	e3		260	8.6614 mm		0 ns
AD8324JRQ-REEL	Analog Devices	LINE DRIVER	OTHER	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.47 V	1				GENERAL PURPOSE		STANDARD	3.3 V				SMALL OUTLINE, SHRINK PITCH					3.13 V	.635 mm	70 Cel		-25 Cel	1	TIN LEAD	DUAL	R-PDSO-G20	1	1.7526 mm	3.9116 mm	Not Qualified					YES	e0		240	8.6614 mm		0 ns
AD8321AR-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1				GENERAL PURPOSE		DIFFERENTIAL	9 V				SMALL OUTLINE						1.27 mm	85 Cel		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified					NO	e0		240	12.8 mm		0 ns
AD8328ARQ-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1				GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE, SHRINK PITCH					4.75 V	.635 mm	85 Cel		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G20	1	1.75 mm	3.9116 mm	Not Qualified					YES	e0		240	8.65 mm		0 ns
AD8328ACPZ-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	VQCCN	SQUARE	UNSPECIFIED	YES	5.25 V	1				GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, VERY THIN PROFILE					4.75 V	.5 mm	85 Cel		-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N20	3	1 mm	4 mm	Not Qualified					YES	e3		260	4 mm		0 ns
AD8321AR	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1				GENERAL PURPOSE		DIFFERENTIAL	9 V				SMALL OUTLINE						1.27 mm	85 Cel		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified					NO	e0		240	12.8 mm		0 ns
AD230AN	Analog Devices	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		5	CMOS			EIA-232-C; V.28		STANDARD	5 V		5		IN-LINE	DIP20,.3		Line Driver or Receivers			2.54 mm	85 Cel		-40 Cel	1	TIN LEAD	DUAL	R-PDIP-T20		5.33 mm	7.62 mm	Not Qualified		INVERTED			NO	e0			25.2 mm	10 V	0 ns
AD8328ARQZ-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1				GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE, SHRINK PITCH					4.75 V	.635 mm	85 Cel		-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G20	1	1.75 mm	3.9116 mm	Not Qualified					YES	e3		260	8.65 mm		0 ns
AD8328ACPZ	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	VQCCN	SQUARE	UNSPECIFIED	YES	5.25 V	1				GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, VERY THIN PROFILE					4.75 V	.5 mm	85 Cel		-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N20	3	1 mm	4 mm	Not Qualified					YES	e3		260	4 mm		0 ns
AD230AR	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		5	CMOS			EIA-232-C; V.28		STANDARD	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers			1.27 mm	85 Cel		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified		INVERTED			NO	e0			12.8 mm	10 V	0 ns
AD233AN	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	CMOS			EIA-232-C; V.28	10 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP20,.3		Line Driver or Receivers		4.75 V	2.54 mm	85 Cel		-40 Cel	2	TIN LEAD	DUAL	R-PDIP-T20		5.33 mm	7.62 mm	Not Qualified	1.6 Amp	INVERTED	2		NO	e0			25.2 mm	10 V	0 ns
MAX9480CUP+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2.75 V	1	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	2.5 V	5.25 V		-2.5 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH		4.75 V			2.25 V	.65 mm	85 Cel	5 V	-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G20	1	1.1 mm	4.4 mm	Not Qualified			1	ALSO REQUIRES -5V SUPPLY	YES	e3	30	260	6.5 mm		0 ns
MAX9481CUP+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2.75 V	1	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	2.5 V	5.25 V		-2.5 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH		4.75 V			2.25 V	.65 mm	85 Cel	5 V	-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G20	1	1.1 mm	4.4 mm	Not Qualified			1	ALSO REQUIRES -5V SUPPLY	YES	e3	30	260	6.5 mm		0 ns
AD8328ARQ	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1				GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE, SHRINK PITCH					4.75 V	.635 mm	85 Cel		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G20	1	1.75 mm	3.9116 mm	Not Qualified					YES	e0		240	8.65 mm		0 ns
AD8327ARUZ	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1				GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.75 V	.65 mm	85 Cel		-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G20	1	1.1 mm	4.4 mm	Not Qualified					NO	e3		260	6.5 mm		0 ns
AD230AQ	Analog Devices	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO		5	CMOS			EIA-232-C; V.28		STANDARD	5 V		5		IN-LINE	DIP20,.3		Line Driver or Receivers			2.54 mm	85 Cel		-40 Cel	1	TIN LEAD	DUAL	R-GDIP-T20		5.08 mm	7.62 mm	Not Qualified		INVERTED			NO	e0				10 V	0 ns
AD8328ARQZ	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1				GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE, SHRINK PITCH					4.75 V	.635 mm	85 Cel		-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G20	1	1.75 mm	3.9116 mm	Not Qualified					YES	e3		260	8.65 mm		0 ns
AD8324ACP	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	3.47 V	1				GENERAL PURPOSE		STANDARD	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3.13 V	.5 mm	85 Cel		-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N20	3	1 mm	4 mm	Not Qualified					YES	e0		240	4 mm		0 ns
AD8328ACP-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	VQCCN	SQUARE	UNSPECIFIED	YES	5.25 V	1				GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, VERY THIN PROFILE					4.75 V	.5 mm	85 Cel		-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N20		1 mm	4 mm	Not Qualified					YES	e0			4 mm		0 ns
AD8324JRQ-REEL7	Analog Devices	LINE DRIVER	OTHER	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.47 V	1				GENERAL PURPOSE		STANDARD	3.3 V				SMALL OUTLINE, SHRINK PITCH					3.13 V	.635 mm	70 Cel		-25 Cel	1	TIN LEAD	DUAL	R-PDSO-G20	1	1.7526 mm	3.9116 mm	Not Qualified					YES	e0		240	8.6614 mm		0 ns
AD8328ACPZ-REEL7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	VQCCN	SQUARE	UNSPECIFIED	YES	5.25 V	1				GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, VERY THIN PROFILE					4.75 V	.5 mm	85 Cel		-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N20	3	1 mm	4 mm	Not Qualified					YES	e3		260	4 mm		0 ns
AD8328ACP-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	VQCCN	SQUARE	UNSPECIFIED	YES	5.25 V	1				GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, VERY THIN PROFILE					4.75 V	.5 mm	85 Cel		-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N20	3	1 mm	4 mm	Not Qualified					YES	e0		240	4 mm		0 ns
AD8324JRQZ-REEL	Analog Devices	LINE DRIVER	OTHER	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.47 V	1				GENERAL PURPOSE		STANDARD	3.3 V				SMALL OUTLINE, SHRINK PITCH					3.13 V	.635 mm	70 Cel		-25 Cel	1	MATTE TIN	DUAL	R-PDSO-G20	1	1.7526 mm	3.9116 mm	Not Qualified					YES	e3		260	8.6614 mm		0 ns
PMAD230JN	Analog Devices		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			CMOS						5 V		5		IN-LINE	DIP20,.3		Line Driver or Receivers			2.54 mm	70 Cel		0 Cel	5	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T20				Not Qualified					NO	e0				10 V
AD230JN	Analog Devices	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		5	CMOS			EIA-232-C; V.28		STANDARD	5 V		5		IN-LINE	DIP20,.3		Line Driver or Receivers			2.54 mm	70 Cel		0 Cel	1	TIN LEAD	DUAL	R-PDIP-T20		5.33 mm	7.62 mm	Not Qualified		INVERTED			NO	e0			25.2 mm	10 V	0 ns
AD8324ACPZ-REEL7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	3.47 V	1				GENERAL PURPOSE		STANDARD	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3.13 V	.5 mm	85 Cel		-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N20	3	1 mm	4 mm	Not Qualified					YES	e3		260	4 mm		0 ns
DS1229S	Analog Devices		COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS				10 mA		5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers			1.27 mm	70 Cel		0 Cel	3	TIN LEAD	DUAL	R-PDSO-G20				Not Qualified	3.2 Amp				NO	e0				4 V
MAX9315EUP+T	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.8 V	1	BIPOLAR		.44 ns	GENERAL PURPOSE		STANDARD	2.5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					2.375 V	.65 mm	85 Cel		-40 Cel	5	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G20	1	1.1 mm	4.4 mm	Not Qualified				-2.375V TO -3.8V SUPPLY FOR DIFFERENTIAL LVECL OPERATION	YES	e3	30	260	6.5 mm		0 ns
MAX9315EUP+	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.8 V	1	BIPOLAR		.44 ns	GENERAL PURPOSE		STANDARD	2.5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					2.375 V	.65 mm	85 Cel		-40 Cel	5	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G20	1	1.1 mm	4.4 mm	Not Qualified				-2.375V TO -3.8V SUPPLY FOR DIFFERENTIAL LVECL OPERATION	YES	e3	30	260	6.5 mm		0 ns
AD233JN	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	CMOS			EIA-232-C; V.28	10 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP20,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		0 Cel	2	TIN LEAD	DUAL	R-PDIP-T20		5.33 mm	7.62 mm	Not Qualified	1.6 Amp	INVERTED	2		NO	e0			25.2 mm	10 V	0 ns
PMAD230AQ	Analog Devices		INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO			CMOS						5 V		5		IN-LINE	DIP20,.3		Line Driver or Receivers			2.54 mm	85 Cel		-40 Cel	5	Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T20				Not Qualified					NO	e0				10 V
AD8327ARU	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1				GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.75 V	.65 mm	85 Cel		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G20	1	1.1 mm	4.4 mm	Not Qualified					NO	e0		240	6.5 mm		0 ns
AD8324ACPZ	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	3.47 V	1				GENERAL PURPOSE		STANDARD	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3.13 V	.5 mm	85 Cel		-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N20	3	1 mm	4 mm	Not Qualified					YES	e3		260	4 mm		0 ns
PMAD233AN	Analog Devices		INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO							10 mA		5 V		5		IN-LINE	DIP20,.3		Line Driver or Receivers			2.54 mm	85 Cel		-40 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T20				Not Qualified	1.6 Amp				NO	e0				10 V
PMAD230JR	Analog Devices		COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS						5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers			1.27 mm	70 Cel		0 Cel	5	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G20				Not Qualified					NO	e0				10 V
AD8324ACP-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	3.47 V	1				GENERAL PURPOSE		STANDARD	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3.13 V	.5 mm	85 Cel		-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N20		1 mm	4 mm	Not Qualified					YES	e0			4 mm		0 ns
AD230JR	Analog Devices	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		5	CMOS			EIA-232-C; V.28		STANDARD	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers			1.27 mm	70 Cel		0 Cel	1	TIN LEAD	DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified		INVERTED			NO	e0			12.8 mm	10 V	0 ns
PMAD230AR	Analog Devices		INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS						5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers			1.27 mm	85 Cel		-40 Cel	5	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G20				Not Qualified					NO	e0				10 V
AD8324JRQZ	Analog Devices	LINE DRIVER	OTHER	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.47 V	1				GENERAL PURPOSE		STANDARD	3.3 V				SMALL OUTLINE, SHRINK PITCH					3.13 V	.635 mm	70 Cel		-25 Cel	1	MATTE TIN	DUAL	R-PDSO-G20	1	1.7526 mm	3.9116 mm	Not Qualified					YES	e3		260	8.6614 mm		0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.