20 Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
PMAD230AN	Analog Devices		INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			CMOS					5 V		5		IN-LINE	DIP20,.3		Line Driver or Receivers			2.54 mm	85 Cel			-40 Cel	5	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T20				Not Qualified					NO	e0				10 V
AD8324ACP-REEL7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	3.47 V	1			GENERAL PURPOSE		STANDARD	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3.13 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N20	3	1 mm	4 mm	Not Qualified					YES	e0		240	4 mm		0 ns
AD8321ARZ-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1			GENERAL PURPOSE		DIFFERENTIAL	9 V				SMALL OUTLINE						1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified					NO	e3		260	12.8 mm		0 ns
AD8327ARUZ-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1			GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.75 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G20	1	1.1 mm	4.4 mm	Not Qualified					NO	e3		260	6.5 mm		0 ns
LTC1045CSW	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		6	CMOS	250 ns	EIA-232		STANDARD	5 V				SMALL OUTLINE						1.27 mm	85 Cel			-40 Cel	6	TIN LEAD	DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified					NO	e0			12.8 mm
ADM3222ARU	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS	1200 ns	EIA-232-E; TIA-232-E; V.28	10 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp		2		NO	e0		240	6.5 mm	5 V	1000 ns
ADN4656BRSZ	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		4.5 ns	EIA-644; TIA-644	.082 mA	DIFFERENTIAL	3.3 V				SMALL OUTLINE, SHRINK PITCH	SSOP20,.3			.000005 Amp	3 V	.65 mm	125 Cel			-40 Cel	4		DUAL	R-PDSO-G20		2 mm	5.3 mm			COMPLEMENTARY	4		YES		NOT SPECIFIED	NOT SPECIFIED	7.2 mm		4.5 ns
ADM1385ARS	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS	1200 ns	EIA-232-E; TIA-232-E; V.28	10 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G20	1	2 mm	5.3 mm	Not Qualified	1.6 Amp		2		NO	e0		240	7.2 mm	5 V	1000 ns
ADN4654BRWZ-RL7	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		4.5 ns	EIA-644; TIA-644	.08 mA	DIFFERENTIAL	3.3 V				SMALL OUTLINE	SOP20,.4			.000005 Amp	3 V	1.27 mm	125 Cel			-40 Cel	4		DUAL	R-PDSO-G20	3	2.65 mm	7.5 mm			COMPLEMENTARY	4		YES			260	12.8 mm		4.5 ns
LT1739IFE	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	20	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL					SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					5 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified					YES	e0			6.5 mm
LTC1385IG#TR	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		2		3500 ns	EIA-562; TIA-562		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G20	1	2 mm	5.3 mm	Not Qualified			2	2 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP	NO	e0			7.2 mm		800 ns
LTC1385CG#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		2	CMOS	3500 ns	EIA-562; TIA-562		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	70 Cel		3-STATE	0 Cel	2	MATTE TIN	DUAL	R-PDSO-G20	1	2 mm	5.3 mm	Not Qualified		INVERTED	2	2 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP	NO	e3	30	260	7.2 mm		800 ns
ADM230LAR-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	5	CMOS		EIA-232-E; V.28	6 mA	STANDARD	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	5	TIN LEAD	DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified		INVERTED		EXTERNAL CHARGE PUMP	NO	e0			12.8 mm	10 V	0 ns
ADN4656BRWZ	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		4.5 ns	EIA-644; TIA-644	.082 mA	DIFFERENTIAL	3.3 V				SMALL OUTLINE	SOP20,.4			.000005 Amp	3 V	1.27 mm	125 Cel			-40 Cel	4		DUAL	R-PDSO-G20		2.65 mm	7.5 mm			COMPLEMENTARY	4		YES		NOT SPECIFIED	NOT SPECIFIED	12.8 mm		4.5 ns
LT1135ACN	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		1	CMOS	1300 ns	EIA-232		SCHMITT TRIGGER	5 V			-12 V	IN-LINE						2.54 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	5	TIN LEAD	DUAL	R-PDIP-T20	1	3.937 mm	7.62 mm	Not Qualified		INVERTED	3		NO	e0	20	235			600 ns
LT1135ACN#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		1	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V			-12 V	IN-LINE						2.54 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	5	MATTE TIN	DUAL	R-PDIP-T20	1	3.937 mm	7.62 mm	Not Qualified		INVERTED	3		NO	e3	40	250			600 ns
LT1135CSW	Analog Devices		COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			BIPOLAR							5,+-12		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers	.00002 Amp		1.27 mm	70 Cel			0 Cel	5	TIN LEAD	DUAL	R-PDSO-G20	1			Not Qualified	1.6 Amp				NO	e0		245		10 V	0 ns
LT1739CFE#TR	Analog Devices	LINE DRIVER	OTHER	GULL WING	20	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL					SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					5 V	.65 mm	85 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified					YES	e0			6.5 mm
LTC1385IG#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		2		3500 ns	EIA-562; TIA-562		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G20	1	2 mm	5.3 mm	Not Qualified			2	2 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP	NO	e3	30	260	7.2 mm		800 ns
LTC1385IG#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		2		3500 ns	EIA-562; TIA-562		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G20	1	2 mm	5.3 mm	Not Qualified			2	2 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP	NO	e3	30	260	7.2 mm		800 ns
ADN4650BRWZ	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		4.5 ns	EIA-644-A; TIA-644-A	72 mA	DIFFERENTIAL	3.3 V				SMALL OUTLINE	SOP20,.4				3 V	1.27 mm	125 Cel		DIFFERENTIAL	-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G20	3	2.65 mm	7.5 mm				2		YES	e3	30	260	12.8 mm	.25 V	4.5 ns
ADN4651BRSZ	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		4.5 ns	EIA-644-A; TIA-644-A	80 mA	DIFFERENTIAL	3.3 V				SMALL OUTLINE, SHRINK PITCH	SSOP20,.3				3 V	.65 mm	125 Cel		DIFFERENTIAL	-40 Cel	2		DUAL	R-PDSO-G20		2 mm	5.3 mm				2		YES		NOT SPECIFIED	NOT SPECIFIED	7.2 mm	.25 V	4.5 ns
LTC1384IG#TR	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		2		3500 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G20	1	2 mm	5.3 mm	Not Qualified			2	2 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0			7.2 mm		800 ns
LTC1385CG#TR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		2	CMOS	3500 ns	EIA-562; TIA-562		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	70 Cel		3-STATE	0 Cel	2	TIN LEAD	DUAL	R-PDSO-G20	1	2 mm	5.3 mm	Not Qualified		INVERTED	2	2 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP	NO	e0			7.2 mm		800 ns
LTC1385IG	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		2		3500 ns	EIA-562; TIA-562		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G20	1	2 mm	5.3 mm	Not Qualified			2	2 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP	NO	e0			7.2 mm		800 ns
ADN4655BRWZ	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		4.5 ns	EIA-644; TIA-644	.082 mA	DIFFERENTIAL	3.3 V				SMALL OUTLINE	SOP20,.4			.000005 Amp	3 V	1.27 mm	125 Cel			-40 Cel	4		DUAL	R-PDSO-G20	3	2.65 mm	7.5 mm			COMPLEMENTARY	4		YES			260	12.8 mm		4.5 ns
LTC1385CG#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		2	CMOS	3500 ns	EIA-562; TIA-562		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	70 Cel		3-STATE	0 Cel	2	MATTE TIN	DUAL	R-PDSO-G20	1	2 mm	5.3 mm	Not Qualified		INVERTED	2	2 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP	NO	e3	30	260	7.2 mm		800 ns
LT1739CFE#PBF	Analog Devices	LINE DRIVER	OTHER	GULL WING	20	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL					SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					5 V	.65 mm	85 Cel			0 Cel	1	MATTE TIN	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified					YES	e3	30	260	6.5 mm
LT1739CFE#TRPBF	Analog Devices	LINE DRIVER	OTHER	GULL WING	20	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL					SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					5 V	.65 mm	85 Cel			0 Cel	1	MATTE TIN	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified					YES	e3			6.5 mm
ADM233LAN	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2	CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP20,.3		Line Driver or Receivers		4.75 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	2	TIN LEAD	DUAL	R-PDIP-T20		4.57 mm	7.62 mm	Not Qualified		INVERTED	2	INTERNAL CHARGE PUMP	NO	e0			24.51 mm	10 V	0 ns
LTC1384IG#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		2		3500 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G20	1	2 mm	5.3 mm	Not Qualified			2	2 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3	30	260	7.2 mm		800 ns
LTC1384IG	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		2		3500 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G20	1	2 mm	5.3 mm	Not Qualified			2	2 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0			7.2 mm		800 ns
ADM1385ARS-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS	1200 ns	EIA-232-E; TIA-232-E; V.28	10 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G20		2 mm	5.3 mm	Not Qualified	1.6 Amp		2		NO	e0			7.2 mm	5 V	1000 ns
ADM1385ARS-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS	1200 ns	EIA-232-E; TIA-232-E; V.28	10 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G20		2 mm	5.3 mm	Not Qualified	1.6 Amp		2		NO	e0			7.2 mm	5 V	1000 ns
LTC1387CG	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	CMOS	4000 ns	EIA-232; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDSO-G20		2 mm	5.3 mm	Not Qualified			1		YES	e0			7.2 mm		6000 ns
ADM203JNZ	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2	BICMOS	5000 ns	EIA-232-E; V.28	4 mA	SCHMITT TRIGGER	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	2	MATTE TIN	DUAL	R-PDIP-T20		5.33 mm	7.62 mm	Not Qualified		INVERTED	2	INTERNAL CHARGE PUMP	NO	e3			25.2 mm		5000 ns
ADN4656BRWZ-RL7	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		4.5 ns	EIA-644; TIA-644	.082 mA	DIFFERENTIAL	3.3 V				SMALL OUTLINE	SOP20,.4			.000005 Amp	3 V	1.27 mm	125 Cel			-40 Cel	4		DUAL	R-PDSO-G20		2.65 mm	7.5 mm			COMPLEMENTARY	4		YES		NOT SPECIFIED	NOT SPECIFIED	12.8 mm		4.5 ns
ADN4652BRWZ-RL7	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		4.5 ns	EIA-644-A; TIA-644-A	80 mA	DIFFERENTIAL	3.3 V				SMALL OUTLINE	SOP20,.4				3 V	1.27 mm	125 Cel		DIFFERENTIAL	-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G20	3	2.65 mm	7.5 mm				2		YES	e3	30	260	12.8 mm	.25 V	4.5 ns
ADM230LJR	Analog Devices	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	5	CMOS		EIA-232-E; V.28	6 mA	STANDARD	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	5	TIN LEAD	DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified		INVERTED		EXTERNAL CHARGE PUMP	NO	e0			12.8 mm	10 V	0 ns
LTC1387ISW	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS	4000 ns	EIA-232; EIA-422; EIA-485; EIA-562		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified			1		YES	e0			12.8 mm		6000 ns
ADN4652BRWZ	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		4.5 ns	EIA-644-A; TIA-644-A	80 mA	DIFFERENTIAL	3.3 V				SMALL OUTLINE	SOP20,.4				3 V	1.27 mm	125 Cel		DIFFERENTIAL	-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G20	3	2.65 mm	7.5 mm				2		YES	e3	30	260	12.8 mm	.25 V	4.5 ns
ADN4656BRSZ-RL7	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		4.5 ns	EIA-644; TIA-644	.082 mA	DIFFERENTIAL	3.3 V				SMALL OUTLINE, SHRINK PITCH	SSOP20,.3			.000005 Amp	3 V	.65 mm	125 Cel			-40 Cel	4		DUAL	R-PDSO-G20		2 mm	5.3 mm			COMPLEMENTARY	4		YES		NOT SPECIFIED	NOT SPECIFIED	7.2 mm		4.5 ns
ADM14196EAR	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		1500 ns	EIA-232; V.28		SCHMITT TRIGGER	5 V	13.2 V		-12 V	SMALL OUTLINE		9 V			4.75 V	1.27 mm	85 Cel	12 V		-40 Cel	5	TIN LEAD	DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified			3		NO	e0			12.8 mm		500 ns
ADM3222ARS-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS	1200 ns	EIA-232-E; TIA-232-E; V.28	10 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G20	1	2 mm	5.3 mm	Not Qualified	1.6 Amp		2		NO	e0		240	7.2 mm	5 V	1000 ns
LT1135ACSW	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	CMOS	1300 ns	EIA-232		SCHMITT TRIGGER	5 V			-12 V	SMALL OUTLINE						1.27 mm	70 Cel	12 V		0 Cel	5	TIN LEAD	DUAL	R-PDSO-G20	1	2.642 mm	7.493 mm	Not Qualified			3	CAN ALSO BE OPERATED AT 12 VOLTS SUPPLY	NO	e0			12.8015 mm		600 ns
ADM203JN	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2	BICMOS	5000 ns	EIA-232-E; V.28	4 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP20,.3		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	2	TIN LEAD	DUAL	R-PDIP-T20		5.33 mm	7.62 mm	Not Qualified	1.6 Amp	INVERTED	2	INTERNAL CHARGE PUMP	NO	e0			25.2 mm	10 V	5000 ns
ADN4652BRSZ-RL7	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		4.5 ns	EIA-644-A; TIA-644-A	80 mA	DIFFERENTIAL	3.3 V				SMALL OUTLINE, SHRINK PITCH	SSOP20,.3				3 V	.65 mm	125 Cel		DIFFERENTIAL	-40 Cel	2		DUAL	R-PDSO-G20		2 mm	5.3 mm				2		YES		NOT SPECIFIED	NOT SPECIFIED	7.2 mm	.25 V	4.5 ns
LTC1045CSW#PBF	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		6	CMOS	250 ns	EIA-232		STANDARD	5 V				SMALL OUTLINE						1.27 mm	85 Cel			-40 Cel	6	MATTE TIN	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified					NO	e3	30	260	12.8 mm

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.