24 Line Drivers & Receivers 1,167

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
LTC1321CSW	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	CMOS	4000 ns	EIA-485; EIA-562; TIA-562	2 mA	SCHMITT TRIGGER	5 V		+-5	-5 V	SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			0 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G24		2.642 mm	10.325 mm	Not Qualified	3 Amp	TRUE	2		YES	e0			15.395 mm	7.4 V	6000 ns
ADM236LJR-REEL	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified		INVERTED	3	INTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0		240	15.4 mm	10 V	0 ns
ADM208ARS	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS		EIA-232-E; V.28	9 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers		4.5 V	.65 mm	85 Cel		TOTEM-POLE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G24	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	4	EXTERNAL CHARGE PUMP	NO	e0		240	8.2 mm	10 V	5000 ns
AD8133ACP-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	6 V	3	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	3	TIN LEAD	QUAD	S-XQCC-N24	3	1 mm	4 mm	Not Qualified					YES	e0		240	4 mm		0 ns
ADM239LARZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS		EIA-232-E; V.28	1 mA	SCHMITT TRIGGER	5 V	13.2 V			SMALL OUTLINE		7.5 V			4.5 V	1.27 mm	85 Cel	12 V	TOTEM-POLE	-40 Cel	3	MATTE TIN	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified		INVERTED	5	INTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3		260	15.4 mm		0 ns
ADM207ARS-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS	5000 ns	EIA-232-E; V.28	9 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers		4.5 V	.65 mm	85 Cel			-40 Cel	5	TIN LEAD	DUAL	R-PDSO-G24		2 mm	5.3 mm	Not Qualified	1.6 Amp		3	EXTERNAL CHARGE PUMP	NO	e0			8.2 mm	10 V	5000 ns
LTC1323CG	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS	120 ns	EIA-422; EIA-562; APPLETALK		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH					4.5 V	.65 mm	70 Cel		3-STATE	0 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G24	1	2 mm	5.3 mm	Not Qualified		COMPLEMENTARY	3	EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	YES	e0			8.2 mm		160 ns
ADM208EARS-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers		4.5 V	.65 mm	85 Cel		TOTEM-POLE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G24	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	4		NO	e0		240	8.2 mm	10 V	2000 ns
LTC1321ISW#TRPBF	Analog Devices		INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS			1 mA		5 V		+-5	-5 V	SMALL OUTLINE	SOP24,.4		Line Driver or Receivers	.000015 Amp		1.27 mm	85 Cel			-40 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G24	1			Not Qualified	3 Amp				YES	e3	30	260		7.4 V	6000 ns
LTC1346ACSW	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3	CMOS	70 ns	EIA-232; EIA-422; EIA-485; V.35	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	-5.25 V			SMALL OUTLINE		-4.75 V			4.75 V	1.27 mm	70 Cel	-5 V	TOTEM-POLE	0 Cel	3	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified		COMPLEMENTARY	3		YES	e0			15.4 mm		100 ns
LT1134ACSW#TR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	70 Cel			0 Cel	4	TIN LEAD	DUAL	R-PDSO-G24		2.65 mm	7.5 mm	Not Qualified			4		NO	e0			15.4 mm		600 ns
LT1139ACSW#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	70 Cel	12 V		0 Cel	4	MATTE TIN	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified			4		NO	e3	30	260	15.4 mm		600 ns
ADM239LANZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	3	CMOS		EIA-232-E; V.28	1 mA	SCHMITT TRIGGER	5 V	13.2 V			IN-LINE		7.5 V			4.5 V	2.54 mm	85 Cel	12 V	TOTEM-POLE	-40 Cel	3	MATTE TIN	DUAL	R-PDIP-T24		4.57 mm	7.62 mm	Not Qualified		INVERTED	5	INTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3			29.59 mm		0 ns
AD815ARBZ-24-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	24	HSOP	RECTANGULAR	PLASTIC/EPOXY	YES	18 V	1	BIPOLAR		GENERAL PURPOSE	55 mA	DIFFERENTIAL	15 V			-15 V	SMALL OUTLINE, HEAT SINK/SLUG					5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G24	5	2.65 mm	7.5 mm	Not Qualified		COMPLEMENTARY			YES	e3		260	15.4 mm
LT1139ACN	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		1	CMOS	1300 ns	EIA-232		SCHMITT TRIGGER	5 V				IN-LINE						2.54 mm	70 Cel	12 V	3-STATE	0 Cel	4	TIN LEAD	DUAL	R-PDIP-T24	1	3.937 mm	7.62 mm	Not Qualified		INVERTED	4	EXTERNAL CHARGE PUMP	NO	e0			31.62 mm		600 ns
ADM236LANZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	3	CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V				IN-LINE					4.5 V	2.54 mm	85 Cel		3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDIP-T24		4.57 mm	7.62 mm	Not Qualified		INVERTED	3	INTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3			29.59 mm		0 ns
ADM209ARSZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS		EIA-232-E; V.28	1 mA	SCHMITT TRIGGER	5 V	13.2 V			SMALL OUTLINE, SHRINK PITCH		9 V			4.5 V	.65 mm	85 Cel	12 V	TOTEM-POLE	-40 Cel	3	MATTE TIN	DUAL	R-PDSO-G24	1	2 mm	5.3 mm	Not Qualified		INVERTED	5	EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3		260	8.2 mm		5000 ns
ADM236LAR	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified		INVERTED	3	INTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0		240	15.4 mm	10 V	0 ns
ADM209ARS	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS		EIA-232-E; V.28	1 mA	SCHMITT TRIGGER	5 V	13.2 V	5,12		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	9 V	Line Driver or Receivers		4.5 V	.65 mm	85 Cel	12 V	TOTEM-POLE	-40 Cel	3	TIN LEAD	DUAL	R-PDSO-G24	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	5	EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0		240	8.2 mm	10 V	5000 ns
ADA4939-2YCPZ-RL	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	5.25 V	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	105 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N24	3	1 mm	4 mm	Not Qualified					YES	e3		260	4 mm		0 ns
ADM235LJN	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	5	CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.6		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	5	TIN LEAD	DUAL	R-PDIP-T24		5.08 mm	15.24 mm	Not Qualified		INVERTED	5	INTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0			31.625 mm	10 V	0 ns
AD8142ACPZ-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	3	CMOS		GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N24	3	.8 mm	4 mm	Not Qualified					YES	e3	30	260	4 mm		0 ns
LT1132ACSW	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	CMOS	1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	70 Cel			0 Cel	5	TIN LEAD	DUAL	R-PDSO-G24	1	2.642 mm	7.493 mm	Not Qualified			5		NO	e0			15.395 mm		600 ns
LTC1322CN	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	CMOS	70 ns	EIA-232; EIA-485; EIA-562	2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	10 V		-9 V	IN-LINE		6.5 V			4.75 V	2.54 mm	70 Cel	9 V	3-STATE	0 Cel	2	TIN LEAD	DUAL	R-PDIP-T24	1	3.81 mm	7.62 mm	Not Qualified		COMPLEMENTARY	2	CONFIGURABLE INTERFACE STANDARDS; LOOP BACK; INDIVIDUAL DRIVER ENABLES	YES	e0					140 ns
LT1140ACN	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		1	CMOS	1300 ns	EIA-232		SCHMITT TRIGGER	5 V			-12 V	IN-LINE						2.54 mm	70 Cel	12 V	3-STATE	0 Cel	5	TIN LEAD	DUAL	R-PDIP-T24	1	3.937 mm	7.62 mm	Not Qualified		INVERTED	3	3 RECEIVERS ACTIVE UNDER SHUTDOWN	NO	e0			31.62 mm		600 ns
ADM237LAN	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	3	CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers		4.75 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	5	TIN LEAD	DUAL	R-PDIP-T24		4.57 mm	7.62 mm	Not Qualified		INVERTED	3	INTERNAL CHARGE PUMP	NO	e0			29.59 mm	10 V	0 ns
LTC1323CSW#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS	120 ns	EIA-422; EIA-562; APPLETALK		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel		3-STATE	0 Cel	2	MATTE TIN	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified		COMPLEMENTARY	3	EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	YES	e3	30	260	15.4 mm		160 ns
LTC1322ISW#TR	Analog Devices		INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS			1 mA		5 V		+-5	-5 V	SMALL OUTLINE	SOP24,.4		Line Driver or Receivers	.000015 Amp		1.27 mm	85 Cel			-40 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G24				Not Qualified	3 Amp				YES	e0				7.4 V	6000 ns
LTC1335CS#TRPBF	Analog Devices		COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS			2 mA		5 V		+-5	-5 V	SMALL OUTLINE	SOP24,.4		Line Driver or Receivers	.000015 Amp		1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G24				Not Qualified	3 Amp				YES					7.4 V	6000 ns
ADM207AN	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	3	CMOS	5000 ns	EIA-232-E; V.28	9 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	5	TIN LEAD	DUAL	R-PDIP-T24		4.57 mm	7.62 mm	Not Qualified	1.6 Amp	INVERTED	3	EXTERNAL CHARGE PUMP	NO	e0			29.59 mm	10 V	5000 ns
ADM208EAN	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4	CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	4	TIN LEAD	DUAL	R-PDIP-T24		5.33 mm	7.62 mm	Not Qualified	1.6 Amp	INVERTED	4		NO	e0			31.75 mm	10 V	2000 ns
LTC1321IS#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	CMOS	4000 ns	EIA-485; EIA-562; TIA-562	2 mA	SCHMITT TRIGGER	5 V		+-5	-5 V	SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G24		2.642 mm	10.325 mm	Not Qualified	3 Amp	TRUE	2		YES				15.395 mm	7.4 V	6000 ns
ADM208EANZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4	CMOS		EIA-232-E; V.28	13 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	4	MATTE TIN	DUAL	R-PDIP-T24		5.33 mm	7.62 mm	Not Qualified	1.6 Amp	INVERTED	4		NO	e3			31.75 mm	10 V	2000 ns
ADM237LAR	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3	CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	5	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified		INVERTED	3	INTERNAL CHARGE PUMP	NO	e0		240	15.4 mm	10 V	0 ns
ADM239LJN	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	3	CMOS		EIA-232-E; V.28	1 mA	SCHMITT TRIGGER	5 V	13.2 V	5,12		IN-LINE	DIP24,.3	7.5 V	Line Driver or Receivers		4.5 V	2.54 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	3	TIN LEAD	DUAL	R-PDIP-T24		4.57 mm	7.62 mm	Not Qualified		INVERTED	5	INTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0			29.59 mm	10 V	0 ns
LT1141ACSW#TR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	CMOS	1300 ns	EIA-232		SCHMITT TRIGGER	5 V			-12 V	SMALL OUTLINE						1.27 mm	70 Cel	12 V		0 Cel	3	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G24	1	2.642 mm	7.493 mm	Not Qualified			5		NO	e0			15.395 mm		600 ns
ADM205AN	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	5	CMOS		EIA-232-E; V.28	9 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.6		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel		3-STATE	-40 Cel	5	TIN LEAD	DUAL	R-PDIP-T24		5.08 mm	15.24 mm	Not Qualified	1.6 Amp	INVERTED	5	INTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0			31.625 mm	10 V	5000 ns
ADM238LAQ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4	CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	4	TIN LEAD	DUAL	R-GDIP-T24		5.08 mm	7.62 mm	Not Qualified		INVERTED	4	INTERNAL CHARGE PUMP	NO	e0				10 V	0 ns
AD8141ACPZ-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	3	CMOS		GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N24	3	.8 mm	4 mm	Not Qualified					YES	e3	30	260	4 mm		0 ns
ADM208EARU-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS		EIA-232-E; V.28	13 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		Line Driver or Receivers		4.5 V	.65 mm	85 Cel		TOTEM-POLE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G24		1.2 mm	4.4 mm	Not Qualified	1.6 Amp	INVERTED	4		NO	e0			7.8 mm	10 V	2000 ns
LT1134ACSW	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	CMOS	1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	70 Cel			0 Cel	4	TIN LEAD	DUAL	R-PDSO-G24	1	2.642 mm	7.493 mm	Not Qualified			4		NO	e0			15.395 mm		600 ns
LTC1335CSW#PBF	Analog Devices		COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS			2 mA		5 V		+-5	-5 V	SMALL OUTLINE	SOP24,.4		Line Driver or Receivers	.000015 Amp		1.27 mm	70 Cel			0 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G24	1			Not Qualified	3 Amp				YES	e3	30	260		7.4 V	6000 ns
ADM207EAR	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	5	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	3		NO	e0		240	15.4 mm	10 V	2000 ns
ADM209AR	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS		EIA-232-E; V.28	1 mA	SCHMITT TRIGGER	5 V	13.2 V	5,12		SMALL OUTLINE	SOP24,.4	9 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	12 V	TOTEM-POLE	-40 Cel	3	TIN LEAD	DUAL	R-PDSO-G24		2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5	EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0			15.4 mm	10 V	5000 ns
ADM239LAR-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS		EIA-232-E; V.28	1 mA	SCHMITT TRIGGER	5 V	13.2 V	5,12		SMALL OUTLINE	SOP24,.4	7.5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	12 V	TOTEM-POLE	-40 Cel	3	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified		INVERTED	5	INTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0		240	15.4 mm	10 V	0 ns
ADM237LARZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3	CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	5	MATTE TIN	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified		INVERTED	3	INTERNAL CHARGE PUMP	NO	e3	30	260	15.4 mm	10 V	0 ns
LTC1322IS#TR	Analog Devices		INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS			1 mA		5 V		+-5	-5 V	SMALL OUTLINE	SOP24,.4		Line Driver or Receivers	.000015 Amp		1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G24				Not Qualified	3 Amp				YES					7.4 V	6000 ns
ADM238LJR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified		INVERTED	4	INTERNAL CHARGE PUMP	NO	e0		240	15.4 mm	10 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.