24 Line Drivers & Receivers 1,167

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
LTC1321CSW#TR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	CMOS	4000 ns	EIA-485; EIA-562; TIA-562	2 mA	SCHMITT TRIGGER	5 V			-5 V	SMALL OUTLINE	SOP24,.4				4.75 V	1.27 mm	70 Cel			0 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G24		2.642 mm	10.325 mm		3 Amp	TRUE	2		YES	e0			15.395 mm	7.4 V	6000 ns
AD8134ACP-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	6 V	3					DIFFERENTIAL	5 V			-5 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	3	TIN LEAD	QUAD	S-XQCC-N24	3	1 mm	4 mm	Not Qualified					YES	e0		240	4 mm		0 ns
ADM207EARU-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		Line Driver or Receivers		4.5 V	.65 mm	85 Cel			-40 Cel	5	TIN LEAD	DUAL	R-PDSO-G24	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp		3		NO	e0		240	7.8 mm	10 V	2000 ns
AD8133ACPZ-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	6 V	3	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N24	3	1 mm	4 mm	Not Qualified					YES	e3		260	4 mm		0 ns
LTC1335CS#PBF	Analog Devices		COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS			2 mA		5 V		+-5	-5 V	SMALL OUTLINE	SOP24,.4		Line Driver or Receivers	.000015 Amp		1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G24				Not Qualified	3 Amp				YES					7.4 V	6000 ns
ADM207EARSZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS		EIA-232-E; TIA-232-E; V.28	13 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers		4.5 V	.65 mm	85 Cel			-40 Cel	5	MATTE TIN	DUAL	R-PDSO-G24		2 mm	5.3 mm	Not Qualified	1.6 Amp		3		NO	e3			8.2 mm	10 V	2000 ns
LT1132AISW#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	85 Cel			-40 Cel	5	MATTE TIN	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified			3		NO	e3	30	260	15.4 mm		600 ns
LT1134ACSW#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	70 Cel			0 Cel	4	MATTE TIN	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified			4		NO	e3	30	260	15.4 mm		600 ns
ADM207ANZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	3	CMOS	5000 ns	EIA-232-E; V.28	9 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	5	MATTE TIN	DUAL	R-PDIP-T24		4.57 mm	7.62 mm	Not Qualified	1.6 Amp	INVERTED	3	EXTERNAL CHARGE PUMP	NO	e3			29.59 mm	10 V	5000 ns
AD815ARBZ-24	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	24	HSOP	RECTANGULAR	PLASTIC/EPOXY	YES	18 V	1	BIPOLAR		GENERAL PURPOSE	55 mA	DIFFERENTIAL	15 V			-15 V	SMALL OUTLINE, HEAT SINK/SLUG					5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G24	5	2.65 mm	7.5 mm	Not Qualified		COMPLEMENTARY			YES	e3		260	15.4 mm
LTC1335ISW#TR	Analog Devices		INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS			2 mA		5 V		+-5	-5 V	SMALL OUTLINE	SOP24,.4		Line Driver or Receivers	.000015 Amp		1.27 mm	85 Cel			-40 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G24				Not Qualified	3 Amp				YES	e0				7.4 V	6000 ns
ADM206ARS	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS	5000 ns	EIA-232-E; V.28	7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers		4.5 V	.65 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G24	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	3	EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0		240	8.2 mm	10 V	5000 ns
LT1133ACN	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		1	CMOS	1300 ns	EIA-232		SCHMITT TRIGGER	5 V				IN-LINE						2.54 mm	70 Cel		TOTEM-POLE	0 Cel	3	TIN LEAD	DUAL	R-PDIP-T24	1	3.937 mm	7.62 mm	Not Qualified		INVERTED	5	EXTERNAL CHARGE PUMP	NO	e0			31.62 mm		600 ns
ADM238LAN	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4	CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	4	TIN LEAD	DUAL	R-PDIP-T24		4.57 mm	7.62 mm	Not Qualified		INVERTED	4	INTERNAL CHARGE PUMP	NO	e0			29.59 mm	10 V	0 ns
ADM237LJN-REEL	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	3	CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	5	TIN LEAD	DUAL	R-PDIP-T24		4.57 mm	7.62 mm	Not Qualified		INVERTED	3	INTERNAL CHARGE PUMP	NO	e0			29.59 mm	10 V	0 ns
ADM208ANZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4	CMOS	5000 ns	EIA-232-E; V.28	9 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	4	MATTE TIN	DUAL	R-PDIP-T24		4.57 mm	7.62 mm	Not Qualified	1.6 Amp	INVERTED	4	EXTERNAL CHARGE PUMP	NO	e3			29.59 mm	10 V	5000 ns
ADA4927-2YCPZ-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	11 V	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL					CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	105 Cel			-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N24	3	1 mm	4 mm	Not Qualified					YES	e3		260	4 mm		0 ns
LT1141CSW	Analog Devices		COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			BIPOLAR							5,+-12		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers	.00002 Amp		1.27 mm	70 Cel			0 Cel	3	TIN LEAD	DUAL	R-PDSO-G24	1			Not Qualified	1.6 Amp				NO	e0		245		10 V	0 ns
LT1140ACSW#TR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	CMOS	1300 ns	EIA-232		SCHMITT TRIGGER	5 V			-12 V	SMALL OUTLINE						1.27 mm	70 Cel	12 V		0 Cel	5	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G24	1	2.642 mm	7.493 mm	Not Qualified			3		NO	e0			15.395 mm		600 ns
ADA4950-2YCPZ-RL	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	11 V	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	105 Cel			-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N24	3	1 mm	4 mm	Not Qualified					YES	e3	30	260	4 mm		0 ns
LT1132ACSW#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	70 Cel			0 Cel	5	MATTE TIN	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified			3		NO	e3	30	260	15.4 mm		600 ns
ADM237LJN	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	3	CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	5	TIN LEAD	DUAL	R-PDIP-T24		4.57 mm	7.62 mm	Not Qualified		INVERTED	3	INTERNAL CHARGE PUMP	NO	e0			29.59 mm	10 V	0 ns
AD8133ACP-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	VQCCN	SQUARE	UNSPECIFIED	YES	6 V	3	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	CHIP CARRIER, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	3	TIN LEAD	QUAD	S-XQCC-N24	3	1 mm	4 mm	Not Qualified					YES	e0		240	4 mm		0 ns
ADM235LAQ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	5.25 V	5	CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.6		Line Driver or Receivers		4.75 V	2.54 mm	85 Cel		3-STATE	-40 Cel	5	TIN LEAD	DUAL	R-CDIP-T24		5.72 mm	15.24 mm	Not Qualified		INVERTED	5	INTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0				10 V	0 ns
ADA4320-1ACPZ-R7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	RECTANGULAR	UNSPECIFIED	YES	5.25 V	1					DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.75 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	QUAD	R-XQCC-N24	3	1 mm	4 mm	Not Qualified					YES	e3	30	260	5 mm		0 ns
ADM3312EARU-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS		EIA-232	1 mA	SCHMITT TRIGGER	3.3 V		3/3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		Line Driver or Receivers		2.7 V	.65 mm	85 Cel			-40 Cel	3	TIN LEAD	DUAL	R-PDSO-G24	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp		3		NO	e0		240	7.8 mm	10 V	1000 ns
ADM208EARU	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		Line Driver or Receivers		4.5 V	.65 mm	85 Cel		TOTEM-POLE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G24		1.2 mm	4.4 mm	Not Qualified	1.6 Amp	INVERTED	4		NO	e0			7.8 mm	10 V	2000 ns
AD8134ACPZ-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	6 V	3					DIFFERENTIAL	5 V			-5 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N24	3	1 mm	4 mm	Not Qualified					YES	e3		260	4 mm		0 ns
LT1133AISW#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	85 Cel			-40 Cel	3	MATTE TIN	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified			5		NO	e3	30	260	15.4 mm		600 ns
LTC1322ISW#TRPBF	Analog Devices		INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS			1 mA		5 V		+-5	-5 V	SMALL OUTLINE	SOP24,.4		Line Driver or Receivers	.000015 Amp		1.27 mm	85 Cel			-40 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G24	1			Not Qualified	3 Amp				YES	e3	30	260		7.4 V	6000 ns
LTC1335ISW	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	CMOS		EIA-485; EIA-562; TIA-562	2 mA	SCHMITT TRIGGER	5 V		+-5	-5 V	SMALL OUTLINE	SOP24,.4		Line Driver or Receivers	.000015 Amp	4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G24		2.642 mm	10.325 mm	Not Qualified		TRUE	2		YES	e0			15.395 mm		90 ns
LT1140ACN#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		1	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V			-12 V	IN-LINE						2.54 mm	70 Cel	12 V	3-STATE	0 Cel	5	MATTE TIN	DUAL	R-PDIP-T24	1	3.937 mm	7.62 mm	Not Qualified		INVERTED	3	3 RECEIVERS ACTIVE UNDER SHUTDOWN	NO	e3	30	260	31.62 mm		600 ns
LTC1335IS#TRPBF	Analog Devices		INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS			2 mA		5 V		+-5	-5 V	SMALL OUTLINE	SOP24,.4		Line Driver or Receivers	.000015 Amp		1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G24				Not Qualified	3 Amp				YES					7.4 V	6000 ns
LT1140ACSW	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	CMOS	1300 ns	EIA-232		SCHMITT TRIGGER	5 V			-12 V	SMALL OUTLINE						1.27 mm	70 Cel	12 V		0 Cel	5	TIN LEAD	DUAL	R-PDSO-G24		2.642 mm	7.493 mm	Not Qualified			3		NO	e0			15.395 mm		600 ns
LT1134AIN#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		1	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V				IN-LINE						2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	4	MATTE TIN	DUAL	R-PDIP-T24	1	3.937 mm	7.62 mm	Not Qualified		INVERTED	4	EXTERNAL CHARGE PUMP	NO	e3	30	260	31.62 mm		600 ns
LTC1335IN#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	CMOS	70 ns	EIA-485; EIA-562	2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V			-5 V	IN-LINE					4.75 V	2.54 mm	85 Cel		3-STATE	-40 Cel	2	MATTE TIN	DUAL	R-PDIP-T24	1	3.81 mm	7.62 mm	Not Qualified		COMPLEMENTARY	2	CONFIGURABLE INTERFACE STANDARDS; LOOP BACK; INDIVIDUAL DRIVER ENABLES	YES	e3	30	260			140 ns
AD8142ACPZ-RL	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	3	CMOS		GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N24	3	.8 mm	4 mm	Not Qualified					YES	e3	30	260	4 mm		0 ns
ADM239LJR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS		EIA-232-E; V.28	1 mA	SCHMITT TRIGGER	5 V	13.2 V	5,12		SMALL OUTLINE	SOP24,.4	7.5 V	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	3	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified		INVERTED	5	INTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0		240	15.4 mm	10 V	0 ns
AD8134ACP-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	6 V	3					DIFFERENTIAL	5 V			-5 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	3	TIN LEAD	QUAD	S-XQCC-N24	3	1 mm	4 mm	Not Qualified					YES	e0		240	4 mm		0 ns
ADM237LJR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3	CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	5	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1 Amp	INVERTED	3	INTERNAL CHARGE PUMP	NO	e0		240	15.4 mm	10 V	0 ns
LTC1321CS#TRPBF	Analog Devices		COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS			1 mA		5 V		+-5	-5 V	SMALL OUTLINE	SOP24,.4		Line Driver or Receivers	.000015 Amp		1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G24				Not Qualified	3 Amp				YES					7.4 V	6000 ns
LTC1335CN	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	CMOS	70 ns	EIA-485; EIA-562	2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V			-5 V	IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	2	TIN LEAD	DUAL	R-PDIP-T24	1	3.81 mm	7.62 mm	Not Qualified		COMPLEMENTARY	2	CONFIGURABLE INTERFACE STANDARDS; LOOP BACK; INDIVIDUAL DRIVER ENABLES	YES	e0					140 ns
LT1139CSW	Analog Devices		COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			BIPOLAR							5,12		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers	.00002 Amp		1.27 mm	70 Cel			0 Cel	4	TIN LEAD	DUAL	R-PDSO-G24	1			Not Qualified	1.6 Amp				NO	e0		245		10 V	0 ns
LTC1335IS#TR	Analog Devices		INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS			2 mA		5 V		+-5	-5 V	SMALL OUTLINE	SOP24,.4		Line Driver or Receivers	.000015 Amp		1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G24				Not Qualified	3 Amp				YES					7.4 V	6000 ns
ADM238LAR-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS		EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified		INVERTED	4	INTERNAL CHARGE PUMP	NO	e0		240	15.4 mm	10 V	0 ns
ADM206AN	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	3	CMOS	5000 ns	EIA-232-E; V.28	7 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel		3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDIP-T24		4.57 mm	7.62 mm	Not Qualified	1.6 Amp	INVERTED	3	EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0			29.59 mm	10 V	5000 ns
LTC1322ISW#PBF	Analog Devices		INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS			1 mA		5 V		+-5	-5 V	SMALL OUTLINE	SOP24,.4		Line Driver or Receivers	.000015 Amp		1.27 mm	85 Cel			-40 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G24	1			Not Qualified	3 Amp				YES	e3	30	260		7.4 V	6000 ns
LT1139ACSW#TR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	70 Cel	12 V		0 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified			4		NO	e0			15.4 mm		600 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.