24 Line Drivers & Receivers 1,167

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	No. of Bits	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
ADM207EARZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		CMOS			EIA-232-E; V.28	13 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	5	MATTE TIN	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	3		NO	e3	30	260	15.4 mm	10 V	2000 ns
DS100BR210SQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		2	2					63 mA			2.625 V	2.5,3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	2.375 V	Line Driver or Receivers	.00001 Amp		.5 mm	85 Cel	2.5 V		-40 Cel	2	MATTE TIN	QUAD	S-PQCC-N24	3	.8 mm	4 mm	Not Qualified					YES	e3	30	260	4 mm		0 ns
ISP1507DBSUM	St-ericsson	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1				20 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.65 V			3 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1		YES		NOT SPECIFIED	NOT SPECIFIED	4 mm		20 ns
MAX3161EAG	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		BICMOS		800 ns	EIA-232; EIA-422; EIA-485	5.5 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SOP24,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G24	1	1.99 mm	5.29 mm	Not Qualified	2.5 Amp		2	DELAYS MEASURED IN EIA-422, EIA-485 MODE	NO	e0			8.2 mm	1.5 V	150 ns
MAX3161EAG+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		BICMOS		800 ns	EIA-485; EIA-422; EIA-232	5.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G24	1	1.99 mm	5.29 mm	Not Qualified	2.5 Amp		2	DELAYS MEASURED IN EIA-422, EIA-485 MODE	YES	e3	30	260	8.2 mm	10 V	150 ns
TUSB1002RGER	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2	2					103 mA	DIFFERENTIAL	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.5 mm	70 Cel	3.3 V		0 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24	1	1 mm	4 mm				2		YES	e4	30	260	4 mm
ADM208ARZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS		5000 ns	EIA-232-E; V.28	9 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	4	EXTERNAL CHARGE PUMP	NO	e3	30	260	15.4 mm	10 V	5000 ns
ISL83387EIVZ	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		CMOS			EIA-232; TIA-232; V.24; V.28		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	3	MATTE TIN	DUAL	R-PDSO-G24	3	1.2 mm	4.4 mm				3		NO	e3	30	260	7.8 mm
ISP1301BSFA	St-ericsson	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1				18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	4.5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.7 V			1.65 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1		YES				4 mm		15 ns
LTC1346ACSW#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3		CMOS		70 ns	EIA-232; EIA-422; EIA-485; V.35	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	-5.25 V			SMALL OUTLINE		-4.75 V			4.75 V	1.27 mm	70 Cel	-5 V	TOTEM-POLE	0 Cel	3	MATTE TIN	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified		COMPLEMENTARY	3		YES	e3	30	260	15.4 mm		100 ns
LTM2894HY#PBF	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	BALL	24	BGA	RECTANGULAR	PLASTIC/EPOXY	YES	36 V	1				300 ns	GENERAL PURPOSE	9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				GRID ARRAY	BGA24,21X6,39			.000001 Amp	4.4 V	1 mm	125 Cel		DIFFERENTIAL	-40 Cel	1		BOTTOM	R-PBGA-B24	3	2.31 mm	6.25 mm			COMPLEMENTARY	1		YES		30	260	22 mm	2.5 V	300 ns
MAX14821ETG+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	36 V	1		BICMOS		5000 ns	GENERAL PURPOSE	2.5 mA	SCHMITT TRIGGER	24 V		2.5/5,18/36		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20		Line Driver or Receivers		9 V	.5 mm	85 Cel			-40 Cel	1		QUAD	S-XQCC-N24	1	.8 mm	4 mm	Not Qualified	5 Amp		1		NO				4 mm		2000 ns
MAX14821ETG+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	QCCN	SQUARE	PLASTIC/EPOXY	YES				BICMOS				2.5 mA				2.5/5,18/36		CHIP CARRIER	LCC24,.16SQ,20		Line Driver or Receivers			.5 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQCC-N24	1			Not Qualified	5 Amp				NO	e3	30	260			2000 ns
MAX1490BCPG	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1		CMOS		3000 ns	EIA-422; EIA-485	150 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.6		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	1	TIN LEAD	DUAL	R-PDIP-T24	1	5.08 mm	15.24 mm	Not Qualified	2 Amp	COMPLEMENTARY	1	COMMON I/O; ISOLATED DATA INTERFACE	YES	e0		245	31.75 mm	1.5 V	3000 ns
MAX1490BCPG+	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1		CMOS		3000 ns	EIA-422; EIA-485	125 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP28,.6		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T24	1	5.08 mm	15.24 mm	Not Qualified		COMPLEMENTARY	1	COMMON I/O; ISOLATED DATA INTERFACE	YES	e3			31.75 mm	1.5 V	3000 ns
SN74AXCH8T245PWR	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			8	178 ns		.025 mA		.7 V	3.6 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		.65 V			.65 V	.65 mm	125 Cel	.7 V	3-STATE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	1	1.2 mm	4.4 mm				1	VCCB=.65 TO 3.6 V	NO	e4	30	260	7.8 mm
SN75ALS162DW	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	8		TTL		20 ns	IEEE-488	75 mA	SCHMITT TRIGGER	5 V	5.25 V			SMALL OUTLINE		4.75 V		.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V		0 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	48 Amp		8		NO	e4	30	260	15.4 mm		10 ns
SN75ALS162DWE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	8		TTL		20 ns	IEEE-488	75 mA	SCHMITT TRIGGER	5 V	5.25 V			SMALL OUTLINE		4.75 V		.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	OPEN-COLLECTOR	0 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	48 Amp	TRUE	8		NO	e4	30	260	15.4 mm		10 ns
SN75ALS162DWG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	8		TTL		20 ns	IEEE-488		SCHMITT TRIGGER	5 V	5.25 V			SMALL OUTLINE		4.75 V			4.75 V	1.27 mm	70 Cel	5 V	OPEN-COLLECTOR	0 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified		TRUE	8		NO	e4	30	260	15.4 mm		10 ns
ADA4950-2YCPZ-R7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	11 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	105 Cel			-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N24	3	1 mm	4 mm	Not Qualified					YES	e3	30	260	4 mm		0 ns
MAX208IDBR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4				10000 ns	EIA-232-F; TIA-232-F; V.28	20 mA	SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	4.5 V	Line Driver or Receivers	.0002 Amp	4.5 V	.65 mm	85 Cel	5 V		-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	1	2 mm	5.3 mm	Not Qualified	1.6 Amp		4		NO	e4	30	260	8.2 mm	10 V	10000 ns
SN75162BDWE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR		20 ns	IEEE-488	110 mA	SCHMITT TRIGGER	5 V	5.25 V			SMALL OUTLINE		4.75 V		.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	8	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	.048 Amp	TRUE	8		NO	e4	NOT SPECIFIED	260	15.4 mm		22 ns
SN75162BDWG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR		20 ns	IEEE-488	110 mA	SCHMITT TRIGGER	5 V	5.25 V			SMALL OUTLINE		4.75 V			4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified		TRUE	8		NO	e4	30	260	15.4 mm		22 ns
SN75162BDWRE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR		20 ns	IEEE-488	110 mA	SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified		TRUE	8		NO	e4	30	260	15.4 mm		22 ns
STOTG04EQTR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1				300 ns	GENERAL PURPOSE	25 mA	DIFFERENTIAL	1.8 V	5.5 V	1.8,3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	2.7 V	Line Driver or Receivers		1.6 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N24	3	1 mm	4 mm	Not Qualified	2 Amp		1		YES	e3		260	4 mm	2.6 V	24 ns
TRS208CDBR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4				10000 ns	EIA-232-F; TIA-232-F; V.28	20 mA	SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3	4.5 V	Line Driver or Receivers	.0002 Amp	4.5 V	.65 mm	70 Cel	5 V		0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	4		NO	e4	30	260	8.2 mm	10 V	10000 ns
ISP1302HN	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	4.5 V	1				18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.4 V			3 V	.5 mm	85 Cel	3.3 V		-40 Cel	1		QUAD	S-PQCC-N24		1 mm	4 mm	Not Qualified			1		YES				4 mm		15 ns
MAX208CDWRE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4				10000 ns	EIA-232-F; TIA-232-F; V.28	20 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers	.0002 Amp	4.5 V	1.27 mm	70 Cel			0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp		4		NO	e4	30	260	15.4 mm	10 V	10000 ns
ADA4930-2YCPZ-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES		2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE						.5 mm	105 Cel			-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N24	3	.9 mm	4 mm	Not Qualified					YES	e3	30	260	4 mm		0 ns
MC3447P3	Motorola	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	8				30 ns	IEEE-488		STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDIP-T24		4.44 mm	7.62 mm	Not Qualified			1		NO	e0			31.69 mm		30 ns
HIN239CP	Intersil	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	3		CMOS			V.28; EIA-232-E		SCHMITT TRIGGER	5 V		5,12		IN-LINE	DIP24,.6		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel			0 Cel	3	TIN LEAD	DUAL	R-PDIP-T24		5.33 mm	7.62 mm	Not Qualified	1.6 Amp		5		NO	e0			31.875 mm	10 V	0 ns
MAX3161ECAG	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS		800 ns	EIA-232; EIA-422; EIA-485	5.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers		3 V	.65 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDSO-G24	1	1.99 mm	5.29 mm	Not Qualified	2.5 Amp		1		YES	e0			8.2 mm	10 V	150 ns
MAX3161ECAG+	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS		800 ns	EIA-232; EIA-422; EIA-485	6 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers		3 V	.65 mm	70 Cel			0 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G24	1	1.99 mm	5.29 mm	Not Qualified	2.5 Amp		1		YES	e3	30	260	8.2 mm	10 V	150 ns
MC3447P	Motorola	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	8				30 ns	IEEE-488		STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDIP-T24		4.44 mm	7.62 mm	Not Qualified			1		NO	e0			31.69 mm		30 ns
EL5373IU	Intersil	LINE DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V		5	-5 V	SMALL OUTLINE, SHRINK PITCH	SSOP24,.24		Line Driver or Receivers		2.375 V	.635 mm	85 Cel		3-STATE	-40 Cel	3	TIN LEAD	DUAL	R-PDSO-G24	1	1.7272 mm	3.9116 mm	Not Qualified					YES	e0			8.6614 mm	3.7 V	0 ns
EL5373IUZ	Renesas Electronics	LINE DRIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	SMALL OUTLINE, SHRINK PITCH	SSOP24,.24				4.5 V	.635 mm	85 Cel		3-STATE	-40 Cel	3	MATTE TIN	DUAL	R-PDSO-G24	3	1.72 mm	3.91 mm			TRUE			YES	e3	30	260	8.66 mm
ADA4930-2YCPZ-R7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES		2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE						.5 mm	105 Cel			-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N24	3	.9 mm	4 mm	Not Qualified					YES	e3	30	260	4 mm		0 ns
ADA4938-2ACPZ-RL	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	11 V	2					GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N24	3	1 mm	4 mm	Not Qualified					YES	e3		260	4 mm		0 ns
ADM207EARZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		CMOS			EIA-232-E; V.28	13 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	5	MATTE TIN	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	3		NO	e3	30	260	15.4 mm	10 V	2000 ns
ADM238LANZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4		CMOS			EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	4	MATTE TIN	DUAL	R-PDIP-T24		4.57 mm	7.62 mm	Not Qualified		INVERTED	4	INTERNAL CHARGE PUMP	NO	e3			29.59 mm	10 V	0 ns
ADM238LARZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS			EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified		INVERTED	4	INTERNAL CHARGE PUMP	NO	e3	30	260	15.4 mm	10 V	0 ns
LT1134ACSW#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1		BIPOLAR		1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	70 Cel			0 Cel	4	MATTE TIN	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified			4		NO	e3	30	260	15.4 mm		600 ns
AD7306ANZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BICMOS		100 ns	EIA-232; EIA-422	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	3	MATTE TIN	DUAL	R-PDIP-T24		5.33 mm	7.62 mm	Not Qualified		COMPLEMENTARY	2	CONFIGURABLE INTERFACE STANDARDS; EXTERNAL CHARGE PUMP	YES	e3			30.485 mm		200 ns
AD7306ARZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BICMOS		100 ns	EIA-232; EIA-422	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	3	MATTE TIN	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified		COMPLEMENTARY	2	CONFIGURABLE INTERFACE STANDARDS; EXTERNAL CHARGE PUMP	YES	e3	30	260	15.4 mm		200 ns
ADA4927-2YCPZ-R7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	11 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL					CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	105 Cel			-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N24	3	1 mm	4 mm	Not Qualified					YES	e3		260	4 mm		0 ns
ADA4939-2YCPZ-R7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	5.25 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	105 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N24	3	1 mm	4 mm	Not Qualified					YES	e3		260	4 mm		0 ns
ADM208ARSZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS		5000 ns	EIA-232-E; V.28	9 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers		4.5 V	.65 mm	85 Cel		TOTEM-POLE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G24	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	4	EXTERNAL CHARGE PUMP	NO	e3		260	8.2 mm	10 V	5000 ns
ADM208ARZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS		5000 ns	EIA-232-E; V.28	9 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	4	EXTERNAL CHARGE PUMP	NO	e3	30	260	15.4 mm	10 V	5000 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.