24 Line Drivers & Receivers 1,167

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
ADM208EARSZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS			EIA-232-E; V.28	13 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers		4.5 V	.65 mm	85 Cel		TOTEM-POLE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G24	1	2 mm		5.3 mm	Not Qualified	1.6 Amp	INVERTED	4		NO	e3		260	8.2 mm	10 V	2000 ns
ADM208EARSZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS			EIA-232-E; V.28	13 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers		4.5 V	.65 mm	85 Cel		TOTEM-POLE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G24	1	2 mm		5.3 mm	Not Qualified	1.6 Amp	INVERTED	4		NO	e3		260	8.2 mm	10 V	2000 ns
ADM208EARZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS			EIA-232-E; V.28	13 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G24	1	2.65 mm		7.5 mm	Not Qualified	1.6 Amp	INVERTED	4		NO	e3	30	260	15.4 mm	10 V	2000 ns
ADM238LARZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS			EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G24	1	2.65 mm		7.5 mm	Not Qualified			4	INTERNAL CHARGE PUMP	NO	e3	30	260	15.4 mm	10 V	0 ns
ADM238LJNZ	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4		CMOS			EIA-232-E; V.28	13 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel			0 Cel	4	MATTE TIN	DUAL	R-PDIP-T24		4.57 mm		7.62 mm	Not Qualified			4	INTERNAL CHARGE PUMP	NO	e3			29.59 mm	10 V	0 ns
DS125DF111SQE	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2	2				GENERAL PURPOSE	333 mA	DIFFERENTIAL	3.3 V	2.625 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	2.375 V			3 V	.5 mm	85 Cel	2.5 V	DIFFERENTIAL	-40 Cel	2	MATTE TIN	QUAD	S-PQCC-N24	3	.8 mm		4 mm		3 Amp	COMPLEMENTARY	2	ALSO OPERATE 3.3 VOLT SUPPLY	YES	e3	30	260	4 mm
EL5375IUZ-T7	Renesas Electronics	LINE RECEIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		BIPOLAR			GENERAL PURPOSE	33 mA	DIFFERENTIAL	5 V		+-5	-5 V	SMALL OUTLINE, SHRINK PITCH	SSOP24,.24		Line Driver or Receivers		2.375 V	.635 mm	85 Cel			-40 Cel		MATTE TIN	DUAL	R-PDSO-G24	3	1.7272 mm		3.9116 mm	Not Qualified			3			e3	30	260	8.6614 mm		0 ns
ISL32177EIRZ	Renesas Electronics	LINE RECEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.5 V	4		BICMOS			EIA-422; EIA-485	15 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20			.000015 Amp	3 V	.5 mm	85 Cel			-40 Cel		MATTE TIN	QUAD	S-PQCC-N24	3	1 mm		4 mm		9 Amp		4		NO	e3	30	260	4 mm	1 V	16 ns
LT1134AISW#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1		BIPOLAR		1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	85 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G24	1	2.65 mm		7.5 mm	Not Qualified			4		NO	e3	30	260	15.4 mm		600 ns
LT1141ACSW#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1		CMOS		1300 ns	EIA-232		SCHMITT TRIGGER	5 V			-12 V	SMALL OUTLINE						1.27 mm	70 Cel	12 V		0 Cel	3	MATTE TIN	DUAL	R-PDSO-G24	1	2.642 mm		7.493 mm	Not Qualified			5		NO	e3	30	260	15.395 mm		600 ns
MAX208CDWR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4				10000 ns	EIA-232-F; TIA-232-F; V.28	20 mA	SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP24,.4	4.5 V	Line Driver or Receivers	.0002 Amp	4.5 V	1.27 mm	70 Cel	5 V		0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	1	2.65 mm		7.5 mm	Not Qualified	1.6 Amp	INVERTED	4		NO	e4	30	260	15.4 mm	10 V	10000 ns
MAX238EWG	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS		10000 ns	EIA-232-E; TIA-232-E; V.28; V.24	15 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm		7.5 mm	Not Qualified	1.6 Amp	INVERTED	4	EXTERNAL CHARGE PUMP	NO	e0			15.4 mm	10 V	10000 ns
MAX238EWG+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS		10000 ns	EIA-232-E; TIA-232-E; V.28; V.24	15 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	4	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G24	1	2.65 mm		7.5 mm	Not Qualified	1.6 Amp	INVERTED	4	EXTERNAL CHARGE PUMP	NO	e3	30	260	15.4 mm	10 V	10000 ns
MAX96701GTG/V+T	Analog Devices	LINE DRIVER		NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	1.9 V	1			AEC-Q100		GENERAL PURPOSE	88 mA	STANDARD	1.8 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20				1.7 V	.5 mm	115 Cel		DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N24	1	.8 mm		4 mm		2 Amp	COMPLEMENTARY			YES	e3	30	260	4 mm	.24 V
SN75162BDW	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR		20 ns	IEEE-488	110 mA	SCHMITT TRIGGER	5 V	5.25 V			SMALL OUTLINE		4.75 V		.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	1	2.65 mm		7.5 mm	Not Qualified	.048 Amp	TRUE	8		NO	e4	30	260	15.4 mm		22 ns
TSB17BA1PW	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	1.95 V	1		CMOS			IEEE 1394		DIFFERENTIAL	1.8 V	3.6 V	1.8,3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	3 V	Line Driver or Receivers		1.65 V	.65 mm	70 Cel	3.3 V		0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	2	1.2 mm		4.4 mm	Not Qualified			1		YES	e4	30	260	7.8 mm	.7 V	0 ns
DS64BR111SQE/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES			2					63 mA			2.625 V	2.5/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	2.375 V	Line Driver or Receivers			.5 mm	85 Cel	2.5 V	DIFFERENTIAL	-40 Cel		MATTE TIN	QUAD	S-PQCC-N24	3	.8 mm		4 mm	Not Qualified		COMPLEMENTARY				e3	30	260	4 mm		0 ns
DS92CK16TMTCX	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		2.5 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G24	1	1.2 mm		4.4 mm	Not Qualified			1		YES	e0		260	7.8 mm		3.8 ns
LMH6678LQ	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	RECTANGULAR	UNSPECIFIED	YES	3.63 V	2					GENERAL PURPOSE		DIFFERENTIAL	3.3 V	13.2 V	3.3,12		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16X.2,20	10.8 V	Line Driver or Receivers	.0000005 Amp	2.97 V	.5 mm	85 Cel	12 V		-40 Cel	2	TIN LEAD	QUAD	R-XQCC-N24	2	.8 mm		4 mm	Not Qualified					YES	e0		235	5 mm	11.25 V	0 ns
ISO422P-U	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				150 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	GWDIP16/24,.4		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G24					Not Qualified	6 Amp		1		YES		NOT SPECIFIED	NOT SPECIFIED		1.5 V	150 ns
DS125BR111RTWT	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	2						DIFFERENTIAL	3.3 V	2.625 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.375 V			3 V	.5 mm	85 Cel	2.5 V		-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N24	3	.8 mm		4 mm				1		YES	e3	30	260	4 mm
DS92CK16TMTC/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		2.5 ns	GENERAL PURPOSE	25 mA	DIFFERENTIAL	3.3 V	3.6 V			SMALL OUTLINE, SHRINK PITCH		3 V			3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	6	MATTE TIN	DUAL	R-PDSO-G24	1	1.2 mm		4.4 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	7.8 mm		3.8 ns
F100314DM	Texas Instruments		MILITARY	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC	NO				ECL100K				65 mA				-4.5	-4.5 V	IN-LINE	DIP24,.4		Line Driver or Receivers			2.54 mm	125 Cel			-55 Cel		Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T24					Not Qualified						e0
DS125BR111SQE/NOPB	Texas Instruments		INDUSTRIAL	NO LEAD	24	QCCN	SQUARE	PLASTIC/EPOXY	YES												2.5/3.3		CHIP CARRIER	LCC24,.16SQ,20		Line Driver or Receivers			.5 mm	85 Cel			-40 Cel		MATTE TIN	QUAD	S-PQCC-N24	3				Not Qualified						e3	30	260
100314FMQB	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	24	QFF	SQUARE	CERAMIC, GLASS-SEALED	YES		4							DIFFERENTIAL					FLATPACK						1.27 mm	125 Cel			-55 Cel			QUAD	S-GQFP-F24		2.159 mm		9.398 mm				4		YES				9.398 mm		2.7 ns
DS125DF111SQ	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2	2				GENERAL PURPOSE	333 mA	DIFFERENTIAL	3.3 V	2.625 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	2.375 V			3 V	.5 mm	85 Cel	2.5 V	DIFFERENTIAL	-40 Cel	2	MATTE TIN	QUAD	S-PQCC-N24	3	.8 mm		4 mm		3 Amp	COMPLEMENTARY	2	ALSO OPERATE 3.3 VOLT SUPPLY	YES	e3	30	260	4 mm
DS64BR111SQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES			2					63 mA			2.625 V	2.5/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	2.375 V	Line Driver or Receivers			.5 mm	85 Cel	2.5 V	DIFFERENTIAL	-40 Cel		MATTE TIN	QUAD	S-PQCC-N24	3	.8 mm		4 mm	Not Qualified		COMPLEMENTARY				e3	30	260	4 mm		0 ns
100314DM	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO		5		ECL			GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER					IN-LINE						2.54 mm	125 Cel			-55 Cel			DUAL	R-GDIP-T24		5.72 mm		10.16 mm	Not Qualified			1		YES						2.7 ns
F100314DCQR	Texas Instruments		OTHER	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC	NO				ECL100K				60 mA				-4.5	-4.5 V	IN-LINE	DIP24,.4		Line Driver or Receivers			2.54 mm	85 Cel			0 Cel		Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T24											e0
LMH6678LQX	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	RECTANGULAR	UNSPECIFIED	YES	3.63 V	2					GENERAL PURPOSE		DIFFERENTIAL	3.3 V	13.2 V	3.3,12		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16X.2,20	10.8 V	Line Driver or Receivers	.0000005 Amp	2.97 V	.5 mm	85 Cel	12 V		-40 Cel	2	TIN LEAD	QUAD	R-XQCC-N24	2	.8 mm		4 mm	Not Qualified					YES	e0		235	5 mm	11.25 V	0 ns
DS92CK16TMTC	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		2.5 ns	GENERAL PURPOSE	25 mA	DIFFERENTIAL	3.3 V	3.6 V			SMALL OUTLINE, SHRINK PITCH		3 V			3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	6	TIN LEAD	DUAL	R-PDSO-G24	1	1.2 mm		4.4 mm	Not Qualified		COMPLEMENTARY	1		YES	e0		260	7.8 mm		3.8 ns
100314FM	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	24	QFF	SQUARE	CERAMIC, GLASS-SEALED	YES		5					GENERAL PURPOSE		DIFFERENTIAL					FLATPACK	QFL24,.4SQ			.00007 Amp		1.27 mm	125 Cel		OPEN-EMITTER	-55 Cel			QUAD	S-GQFP-F24		2.159 mm		9.398 mm			COMPLEMENTARY	5	NEGETIVE SUPPLY FROM -4.2 TO-5.7 V AND NEG SUPPLY CURRENT IS -60mA	YES				9.398 mm		2.7 ns
DS125BR111SQ/NOPB	Texas Instruments		INDUSTRIAL	NO LEAD	24	QCCN	SQUARE	PLASTIC/EPOXY	YES												2.5/3.3		CHIP CARRIER	LCC24,.16SQ,20		Line Driver or Receivers			.5 mm	85 Cel			-40 Cel		MATTE TIN	QUAD	S-PQCC-N24	3				Not Qualified						e3	30	260
100314DMQB	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO		4							DIFFERENTIAL					IN-LINE						2.54 mm	125 Cel			-55 Cel			DUAL	R-CDIP-T24		5.72 mm		10.16 mm				4		YES				30.88 mm		2.7 ns
DS92CK16TMTCX/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		2.5 ns	GENERAL PURPOSE	25 mA	DIFFERENTIAL	3.3 V	3.6 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	6	MATTE TIN	DUAL	R-PDSO-G24	1	1.2 mm		4.4 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	7.8 mm		3.8 ns
DS125BR210SQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	QCCN	SQUARE	PLASTIC/EPOXY	YES												2.5/3.3		CHIP CARRIER	LCC24,.16SQ,20		Line Driver or Receivers			.5 mm	85 Cel			-40 Cel			QUAD	S-PQCC-N24					Not Qualified							NOT SPECIFIED	NOT SPECIFIED			0 ns
DS125BR111RTWR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	2						DIFFERENTIAL	3.3 V	2.625 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.375 V			3 V	.5 mm	85 Cel	2.5 V		-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N24	3	.8 mm		4 mm				1		YES	e3	30	260	4 mm
DS125BR210SQE/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	QCCN	SQUARE	PLASTIC/EPOXY	YES												2.5/3.3		CHIP CARRIER	LCC24,.16SQ,20		Line Driver or Receivers			.5 mm	85 Cel			-40 Cel			QUAD	S-PQCC-N24					Not Qualified							NOT SPECIFIED	NOT SPECIFIED			0 ns
ISO422P	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1				150 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16/24,.3		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel			-40 Cel	1		DUAL	R-PDIP-T24					Not Qualified	6 Amp		1		YES		NOT SPECIFIED	NOT SPECIFIED		1.5 V	150 ns
TRS208CNT	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4					EIA-232-F; TIA-232-F; V.28	20 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers	.0002 Amp	4.5 V	2.54 mm	70 Cel			0 Cel	4		DUAL	R-PDIP-T24		5.08 mm		7.62 mm	Not Qualified	1.6 Amp		4		NO				31.64 mm	10 V	10000 ns
THS6204IRHFR	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	28 V	1	2	BIPOLAR			GENERAL PURPOSE	22 mA	DIFFERENTIAL	12 V	14 V	+-6/+-12	-6 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16X.2,20	5 V	Line Driver or Receivers		10 V	.5 mm	85 Cel	6 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N24	2	1 mm	.416 A	4 mm	Not Qualified		COMPLEMENTARY			NO	e4	30	260	5 mm		0 ns
SN75ALS085DWR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		15 ns	IEEE 802.3		DIFFERENTIAL	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G24		2.65 mm		7.5 mm	Not Qualified			2		YES		NOT SPECIFIED	NOT SPECIFIED	15.4 mm		15 ns
SN65LVDS315RGERG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1					GENERAL PURPOSE	13.3 mA	STANDARD	1.8 V		1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20		Line Driver or Receivers		1.65 V	.5 mm	85 Cel			-40 Cel	8	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24	3	1 mm		4 mm	Not Qualified				DUMMY VAL	YES	e4	30	260	4 mm		0 ns
SN65C1168DBLE	Texas Instruments		INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES				BICMOS				9 mA		5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP24,.3		Line Driver or Receivers	.000001 Amp		.635 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G24					Not Qualified	20 Amp				YES		NOT SPECIFIED	NOT SPECIFIED		2 V	0 ns
SN75ALS162DW-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	8		TTL		20 ns	IEEE-488		SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel	1		DUAL	R-PDSO-G24		2.65 mm		7.5 mm	Not Qualified			1		NO				15.4 mm		14 ns
SN74AVCA406LZQSR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	24	VFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		6 ns	GENERAL PURPOSE	.02 mA	STANDARD	1.8 V	3.6 V	3.3		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA24,5X5,20	1.2 V	Other Interface ICs		1.2 V	.5 mm	85 Cel	1.8 V	3-STATE	-40 Cel	1	TIN SILVER COPPER	BOTTOM	S-PBGA-B24	1	1 mm		3 mm	Not Qualified	.08 Amp	TRUE	1		NO	e1	30	260	3 mm		6 ns
SN75ALS085DWRE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		15 ns	IEEE 802.3		DIFFERENTIAL	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G24		2.65 mm		7.5 mm	Not Qualified			2		YES		NOT SPECIFIED	NOT SPECIFIED	15.4 mm		15 ns
MAX3223ECRHLR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	24	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS			EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24/28,.14X.2,20		Line Driver or Receivers	.000001 Amp	3 V	.5 mm	70 Cel			0 Cel	2		QUAD	R-PQCC-N24		1 mm		3.5 mm	Not Qualified	1.6 Amp		2	ALSO OPERATES AT 5V SUPPLY	NO				5.5 mm	10 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.