28 Line Drivers & Receivers 2,129

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
LT1331CSW#TR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR	1300 ns	EIA-232; EIA-562		SCHMITT TRIGGER	3.3 V			SMALL OUTLINE					1.27 mm	70 Cel	5 V		0 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified			5	CAN ALSO OPERATE WITH 5V SUPPLY	NO	e0			17.9 mm		600 ns
LT1342CSW#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	3 V			SMALL OUTLINE					1.27 mm	70 Cel			0 Cel	3	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified			5	ONE RECEIVER ACTIVE IN SHUT DOWN	NO	e3			17.9 mm		3000 ns
LT1331IJ	Analog Devices		INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR			17 mA			3/5,3		IN-LINE	DIP28,.6	Line Driver or Receivers	.00002 Amp		2.54 mm	85 Cel			-40 Cel	3	Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T28				Not Qualified	1.6 Amp				NO	e0				10 V	3000 ns
LT1237CG#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V			SMALL OUTLINE, SHRINK PITCH					.65 mm	70 Cel		3-STATE	0 Cel	3	MATTE TIN	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified		INVERTED	5	1 RECEIVER ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP	NO	e3			10.2 mm		600 ns
LT1331CSW#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR	1300 ns	EIA-232; EIA-562		SCHMITT TRIGGER	3.3 V			SMALL OUTLINE					1.27 mm	70 Cel	5 V		0 Cel	3	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified			5	CAN ALSO OPERATE WITH 5V SUPPLY	NO	e3	30	260	17.9 mm		600 ns
AD8322ARU-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1			GENERAL PURPOSE		DIFFERENTIAL	5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				4.75 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G28	1	1.1 mm	4.4 mm	Not Qualified					YES	e0		240	9.7 mm
ADM5180JP	Analog Devices	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5		CHIP CARRIER	LDCC28,.5SQ	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel		TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified	4 Amp	TRUE	8		NO	e0		225	11.505 mm		550 ns
LT1341CSW#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V			SMALL OUTLINE					1.27 mm	70 Cel			0 Cel	3	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified			5	ONE RECEIVER ACTIVE IN SHUT DOWN	NO	e3	30	260	17.9 mm		600 ns
PMAD241JR	Analog Devices		COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS					5 V	5		SMALL OUTLINE	SOP28,.4	Line Driver or Receivers			1.27 mm	70 Cel			0 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G28				Not Qualified	1.6 Amp				NO	e0				10 V
ADM5180AN	Analog Devices	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BICMOS		EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5		IN-LINE	DIP28,.6	Line Driver or Receivers		4.75 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel		TIN LEAD	DUAL	R-PDIP-T28		6.35 mm	15.24 mm	Not Qualified	4 Amp	TRUE	8		NO	e0			37.4 mm		550 ns
LT1341IJ	Analog Devices		INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR			17 mA		5 V	5		IN-LINE	DIP28,.6	Line Driver or Receivers	.00002 Amp		2.54 mm	85 Cel			-40 Cel	3	Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T28				Not Qualified	1.6 Amp				NO	e0				10 V	600 ns
LT6301IFE	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				5 V	.65 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified					YES	e0			9.7 mm
LT3669EUFD#PBF	Analog Devices	LINE TRANSCEIVER	OTHER	NO LEAD	28	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	40 V	1	BIPOLAR	6000 ns	GENERAL PURPOSE	6 mA	SCHMITT TRIGGER	24 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.16X.2,20			7.5 V	.5 mm	125 Cel		OPEN-COLLECTOR	0 Cel	2	Matte Tin (Sn) - annealed	QUAD	R-PQCC-N28		.8 mm	4 mm				1		NO	e3			5 mm		6500 ns
ADM5170JP	Analog Devices	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1	CMOS	15 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V	+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ	Line Driver or Receivers	.000001 Amp	9 V	1.27 mm	70 Cel		3-STATE	0 Cel	8	TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e0		225	11.505 mm	9 V	0 ns
ADM560JRZ-REEL	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS	1000 ns	EIA-232; TIA-232	3 mA	SCHMITT TRIGGER	3.3 V	3.3		SMALL OUTLINE	SOP28,.4	Line Driver or Receivers		2.97 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e3		260	17.9 mm	10 V	2000 ns
LT1330CNW#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		3	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER				IN-LINE					2.54 mm	70 Cel			0 Cel	3	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T28		4.318 mm	15.24 mm	Not Qualified			5	IT ALSO WORKS AT 5 VOLTS;	NO	e3					600 ns
ADM560JR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS	1000 ns	EIA-232; TIA-232	3 mA	SCHMITT TRIGGER	3.3 V	5		SMALL OUTLINE	SOP28,.4	Line Driver or Receivers	.00004 Amp	2.97 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e0		240	17.9 mm	10 V	2000 ns
LT1537CSW#TR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V			SMALL OUTLINE					1.27 mm	70 Cel		3-STATE	0 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified		INVERTED	5	EXTERNAL CHARGE PUMP	NO	e0			17.9 mm		600 ns
LT1330CNW	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		3	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	3 V			IN-LINE					2.54 mm	70 Cel	5 V		0 Cel	3	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T28	1	4.318 mm	15.24 mm	Not Qualified			5	ONE RECEIVER ACTIVE IN SHUT DOWN	NO	e0	20	235			600 ns
LT1331CNW#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		3	BIPOLAR	1300 ns	EIA-232; EIA-562		SCHMITT TRIGGER	3.3 V			IN-LINE					2.54 mm	70 Cel	5 V		0 Cel	3	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T28		4.318 mm	15.24 mm	Not Qualified			5	CAN ALSO OPERATE WITH 5V SUPPLY	NO	e3					600 ns
ADM560JRS	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS	1000 ns	EIA-232; TIA-232	3 mA	SCHMITT TRIGGER	3.3 V	5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Line Driver or Receivers	.00004 Amp	2.97 V	.65 mm	70 Cel		TOTEM-POLE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e0		240	10.2 mm	10 V	2000 ns
PMAD241AR	Analog Devices		INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS					5 V	5		SMALL OUTLINE	SOP28,.4	Line Driver or Receivers			1.27 mm	85 Cel			-40 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G28				Not Qualified	1.6 Amp				NO	e0				10 V
LT1537CSW	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V			SMALL OUTLINE					1.27 mm	70 Cel		3-STATE	0 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified		INVERTED	5	EXTERNAL CHARGE PUMP	NO	e0			17.9 mm		600 ns
LT1342CG	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	3 V			SMALL OUTLINE, SHRINK PITCH					.65 mm	70 Cel		3-STATE	0 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified		INVERTED	5	5 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP	NO	e0			10.2 mm		3000 ns
LT1330CSW#TR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER				SMALL OUTLINE					1.27 mm	70 Cel			0 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified			5	IT ALSO WORKS AT 5 VOLTS; ONE RECEIVER ACTIVE IN SHUT DOWN	NO	e0			17.9 mm		600 ns
ADM5170APZ	Analog Devices	LINE DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1	CMOS	15000 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V	+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ	Line Driver or Receivers	.000001 Amp	9 V	1.27 mm	85 Cel		3-STATE	-40 Cel	8	MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e3		260	11.505 mm	9 V	0 ns
LT1341CNW	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		3	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V			IN-LINE					2.54 mm	70 Cel			0 Cel	3	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T28	1	4.318 mm	15.24 mm	Not Qualified			5	ONE RECEIVER ACTIVE IN SHUT DOWN	NO	e0	20	235			600 ns
AD8323ARU-REEL7	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1					DIFFERENTIAL	5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				4.75 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G28	1	1.1 mm	4.4 mm	Not Qualified					YES	e0		240	9.7 mm		0 ns
ADM5170AP-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1	CMOS	15 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V	+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ	Line Driver or Receivers	.000001 Amp	9 V	1.27 mm	85 Cel		3-STATE	-40 Cel	8	TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e0		225	11.505 mm	9 V	0 ns
LT1237CSW#TR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V			SMALL OUTLINE					1.27 mm	70 Cel			0 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified			5		NO	e0			17.9 mm		600 ns
LT3669HUFD-2#PBF	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	28	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	40 V	1	BIPOLAR	6000 ns	GENERAL PURPOSE	6 mA	SCHMITT TRIGGER	24 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.16X.2,20			7.5 V	.5 mm	150 Cel		OPEN-COLLECTOR	-40 Cel	2	Matte Tin (Sn) - annealed	QUAD	R-PQCC-N28		.8 mm	4 mm				1		NO	e3			5 mm		6500 ns
LT1342CNW	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		1	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	3 V			IN-LINE					2.54 mm	70 Cel			0 Cel	3	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T28	1	4.318 mm	15.24 mm	Not Qualified			5	ONE RECEIVER ACTIVE IN SHUT DOWN	NO	e0	20	235			3000 ns
LT1341CSW	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V			SMALL OUTLINE					1.27 mm	70 Cel			0 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified			5	ONE RECEIVER ACTIVE IN SHUT DOWN	NO	e0			17.9 mm		600 ns
ADM561JRZ	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS	1000 ns	EIA-232; TIA-232	3 mA	SCHMITT TRIGGER	3.3 V	3.3		SMALL OUTLINE	SOP28,.4	Line Driver or Receivers		2.97 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e3	30	260	17.9 mm	10 V	2000 ns
AD8326ARPZ-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	28	HSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12.6 V	1			GENERAL PURPOSE		STANDARD	12 V			SMALL OUTLINE, HEAT SINK/SLUG				11.4 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G28	1	2.49 mm	7.5 mm	Not Qualified					YES	e3			17.935 mm		0 ns
LT6301IFE#TRPBF	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				5 V	.65 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified					YES	e3	30	260	9.7 mm
AD8322ARU-REEL7	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1			GENERAL PURPOSE		DIFFERENTIAL	5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				4.75 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G28		1.1 mm	4.4 mm	Not Qualified					YES	e0			9.7 mm
ADM561JRZ-REEL	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS	1000 ns	EIA-232; TIA-232	3 mA	SCHMITT TRIGGER	3.3 V	3.3		SMALL OUTLINE	SOP28,.4	Line Driver or Receivers		2.97 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e3	30	260	17.9 mm	10 V	2000 ns
AD8322ARUZ	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1			GENERAL PURPOSE		DIFFERENTIAL	5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				4.75 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G28	1	1.1 mm	4.4 mm	Not Qualified					YES	e3		260	9.7 mm
ADM5170ANZ	Analog Devices	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	11 V	1	CMOS	15000 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V	+-10	-10 V	IN-LINE	DIP28,.6	Line Driver or Receivers	.000001 Amp	9 V	2.54 mm	85 Cel		3-STATE	-40 Cel	8	MATTE TIN	DUAL	R-PDIP-T28		6.35 mm	15.24 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e3			37.4 mm	9 V	0 ns
ADM5180APZ	Analog Devices	LINE RECEIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V			CHIP CARRIER				4.75 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel		MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified		TRUE	8		NO	e3		260	11.505 mm		550 ns
LT1237CG#TR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V			SMALL OUTLINE, SHRINK PITCH					.65 mm	70 Cel		3-STATE	0 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified		INVERTED	5	1 RECEIVER ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP	NO	e0			10.2 mm		600 ns
LT1237CSW#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V			SMALL OUTLINE					1.27 mm	70 Cel			0 Cel	3	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified			5		NO	e3	30	260	17.9 mm		600 ns
LT1341CG#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V			SMALL OUTLINE, SHRINK PITCH					.65 mm	70 Cel		3-STATE	0 Cel	3	MATTE TIN	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified		INVERTED	5	5 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP	NO	e3	30	260	10.2 mm		600 ns
LT3669IUFD#TRPBF	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	28	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	40 V	1	BIPOLAR	6000 ns	GENERAL PURPOSE	6 mA	SCHMITT TRIGGER	24 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.16X.2,20			7.5 V	.5 mm	125 Cel		OPEN-COLLECTOR	-40 Cel	2	Matte Tin (Sn) - annealed	QUAD	R-PQCC-N28	1	.8 mm	4 mm				1		NO	e3		260	5 mm		6500 ns
LT1342IJ	Analog Devices		INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR			17 mA			3.3,5		IN-LINE	DIP28,.6	Line Driver or Receivers	.00002 Amp		2.54 mm	85 Cel			-40 Cel	3	Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T28				Not Qualified	1.6 Amp				NO	e0				10 V	600 ns
LT1237CG	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V			SMALL OUTLINE, SHRINK PITCH					.65 mm	70 Cel		3-STATE	0 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified		INVERTED	5	1 RECEIVER ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP	NO	e0			10.2 mm		600 ns
ADM561JR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS	1000 ns	EIA-232; TIA-232	3 mA	SCHMITT TRIGGER	3.3 V	5		SMALL OUTLINE	SOP28,.4	Line Driver or Receivers	.00004 Amp	2.97 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e0		240	17.9 mm	10 V	2000 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.