28 Line Drivers & Receivers 2,129

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
ADM5180AP-REEL	Analog Devices	LINE RECEIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS			EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel		TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified	4 Amp	TRUE	8		NO	e0		225	11.505 mm		550 ns
LT6301CFE#TR	Analog Devices	LINE DRIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					5 V	.65 mm	70 Cel			0 Cel	2	TIN LEAD	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified					YES	e0			9.7 mm
LT1330CG	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR		1300 ns	EIA-232		SCHMITT TRIGGER	3 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	70 Cel	5 V	3-STATE	0 Cel	3	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified		INVERTED	5	1 RECEIVER ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP	NO	e0			10.2 mm		600 ns
AD8323ARU	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1						DIFFERENTIAL	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.75 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G28	1	1.1 mm	4.4 mm	Not Qualified					YES	e0		240	9.7 mm		0 ns
LT1341CG#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR		1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	70 Cel		3-STATE	0 Cel	3	MATTE TIN	DUAL	R-PDSO-G28		2 mm	5.3 mm	Not Qualified		INVERTED	5	5 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP	NO	e3			10.2 mm		600 ns
ADM560JRS-REEL	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS		1000 ns	EIA-232; TIA-232	3 mA	SCHMITT TRIGGER	3.3 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers	.00004 Amp	2.97 V	.65 mm	70 Cel		TOTEM-POLE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e0		240	10.2 mm	10 V	2000 ns
ADM5180ANZ	Analog Devices	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BICMOS			EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel		MATTE TIN	DUAL	R-PDIP-T28		6.35 mm	15.24 mm	Not Qualified		TRUE	8		NO	e3			37.4 mm		550 ns
ADM561JRSZ	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS		1000 ns	EIA-232; TIA-232	3 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		2.97 V	.65 mm	70 Cel		TOTEM-POLE	0 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e3		260	10.2 mm	10 V	2000 ns
ADM560JRZ	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS		1000 ns	EIA-232; TIA-232	3 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		2.97 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e3		260	17.9 mm	10 V	2000 ns
LT1331CG#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR		1300 ns	EIA-232; EIA-562		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	70 Cel	5 V	3-STATE	0 Cel	3	MATTE TIN	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified		INVERTED	5	CAN ALSO OPERATE WITH 5V SUPPLY	NO	e3	30	260	10.2 mm		600 ns
ADM5180JPZ	Analog Devices	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS			EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				CHIP CARRIER					4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel		MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified		TRUE	8		NO	e3		260	11.505 mm		550 ns
LT1237CSW#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR		1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	70 Cel			0 Cel	3	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified			5		NO	e3			17.9 mm		600 ns
ADM561JRS	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS		1000 ns	EIA-232; TIA-232	3 mA	SCHMITT TRIGGER	3.3 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers	.00004 Amp	2.97 V	.65 mm	70 Cel		TOTEM-POLE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e0		240	10.2 mm	10 V	2000 ns
LT1237CSW	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR		1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	70 Cel			0 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified			5		NO	e0			17.9 mm		600 ns
LT1330CSW	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR		1300 ns	EIA-232		SCHMITT TRIGGER	3 V				SMALL OUTLINE						1.27 mm	70 Cel	5 V		0 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified			5	ONE RECEIVER ACTIVE IN SHUT DOWN	NO	e0			17.9 mm		600 ns
ADM5170APZ-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1	CMOS		15000 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.000001 Amp	9 V	1.27 mm	85 Cel		3-STATE	-40 Cel	8	MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e3		260	11.505 mm	9 V	0 ns
AD8326ARP	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	28	HSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12.6 V	1				GENERAL PURPOSE		STANDARD	12 V				SMALL OUTLINE, HEAT SINK/SLUG					11.4 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G28	3	2.49 mm	7.5 mm	Not Qualified					YES	e0			17.935 mm		0 ns
LT3669HUFD#TRPBF	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	28	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	40 V	1	BIPOLAR		6000 ns	GENERAL PURPOSE	6 mA	SCHMITT TRIGGER	24 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.16X.2,20				7.5 V	.5 mm	150 Cel		OPEN-COLLECTOR	-40 Cel	2	Matte Tin (Sn) - annealed	QUAD	R-PQCC-N28	1	.8 mm	4 mm				1		NO	e3		260	5 mm		6500 ns
MAX9205EAI+T	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	45 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified					YES	e3	30	260	10.2 mm		0 ns
MAX9205EAI/V+	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	10	CMOS	AEC-Q100		GENERAL PURPOSE	45 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	10	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified					YES	e3	30	260	10.2 mm		0 ns
MAX9153EUI+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-644; TIA-644		DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	10	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.1 mm	4.4 mm	Not Qualified			1		YES	e3	30	260	9.7 mm		0 ns
MAX9208EAI+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	10	CMOS			GENERAL PURPOSE	100 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified			10			e3	30	260	10.2 mm		0 ns
MAX9206EAI+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	75 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified			1			e3	30	260	10.2 mm		0 ns
MAX562CAI+T	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS		1700 ns	EIA-232; EIA-562	33 mA	SCHMITT TRIGGER	5 V		3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		2.7 V	.65 mm	70 Cel		3-STATE	0 Cel	3	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	5	5 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3	30	260	10.2 mm	7.4 V	500 ns
MAX9153EUI+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-644; TIA-644		DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	10	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.1 mm	4.4 mm	Not Qualified			1		YES	e3	30	260	9.7 mm		0 ns
MAX562EWI+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS		1700 ns	EIA-232; EIA-562	33 mA	SCHMITT TRIGGER	5 V		3/5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		2.7 V	1.27 mm	85 Cel		3-STATE	-40 Cel	3	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5	5 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3	30	260	17.9 mm	7.4 V	500 ns
MAX9150EUI+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		3.5 ns	EIA-644; TIA-644		DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	10	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.1 mm	4.4 mm	Not Qualified			1		YES	e3	30	260	9.7 mm		3.5 ns
MAX9150EUI+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		3.5 ns	EIA-644; TIA-644		DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	10	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.1 mm	4.4 mm	Not Qualified			1		YES	e3	30	260	9.7 mm		3.5 ns
MAX9205EAI/V+T	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS	AEC-Q100			45 mA		3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers			.635 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1			Not Qualified						e3	30	260
MAX560CAI+T	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-562	8 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	70 Cel		3-STATE	0 Cel	4	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	5	2 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3	30	260	10.2 mm	7.4 V	10000 ns
MAX9208EAI+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	10	CMOS			GENERAL PURPOSE	100 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified			10			e3	30	260	10.2 mm		0 ns
MAX561CAI+T	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-562	8 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	70 Cel		3-STATE	0 Cel	4	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	5	EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3	30	260	10.2 mm	7.4 V	10000 ns
MAX9206EAI/V+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	10	CMOS	AEC-Q100		GENERAL PURPOSE	75 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified			10			e3	30	260	10.2 mm		0 ns
MAX9482CUI+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2.75 V	1	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	2.5 V	5.25 V		-2.5 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH		4.75 V			2.25 V	.65 mm	85 Cel	5 V		-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.1 mm	4.4 mm	Not Qualified			1	ALSO REQUIRES -5V SUPPLY	YES	e3	30	260	9.7 mm		0 ns
MAX562EAI+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS		1700 ns	EIA-232; EIA-562	33 mA	SCHMITT TRIGGER	5 V		3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		2.7 V	.65 mm	85 Cel		3-STATE	-40 Cel	3	MATTE TIN	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	5	5 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3	30	260	10.2 mm	7.4 V	500 ns
ADM5180JP-REEL	Analog Devices	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS			EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel		TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified	4 Amp	TRUE	8		NO	e0		225	11.505 mm		550 ns
LT1331CG#TR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR		1300 ns	EIA-232; EIA-562		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	70 Cel	5 V	3-STATE	0 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified		INVERTED	5	CAN ALSO OPERATE WITH 5V SUPPLY	NO	e0			10.2 mm		600 ns
LT1537CSW#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	BIPOLAR		1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	70 Cel		3-STATE	0 Cel	3	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified		INVERTED	5	EXTERNAL CHARGE PUMP	NO	e3	30	260	17.9 mm		600 ns
LT3669HUFD#PBF	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	28	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	40 V	1	BIPOLAR		6000 ns	GENERAL PURPOSE	6 mA	SCHMITT TRIGGER	24 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.16X.2,20				7.5 V	.5 mm	150 Cel		OPEN-COLLECTOR	-40 Cel	2	Matte Tin (Sn) - annealed	QUAD	R-PQCC-N28		.8 mm	4 mm				1		NO	e3			5 mm		6500 ns
ADM5180JPZ-REEL	Analog Devices	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS			EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				CHIP CARRIER					4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel		MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified		TRUE	8			e3			11.505 mm		550 ns
LT1342CSW#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR		1300 ns	EIA-232		SCHMITT TRIGGER	3 V				SMALL OUTLINE						1.27 mm	70 Cel			0 Cel	3	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified			5	ONE RECEIVER ACTIVE IN SHUT DOWN	NO	e3	30	260	17.9 mm		3000 ns
LT1342CSW#TR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR		1300 ns	EIA-232		SCHMITT TRIGGER	3 V				SMALL OUTLINE						1.27 mm	70 Cel			0 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified			5	ONE RECEIVER ACTIVE IN SHUT DOWN	NO	e0			17.9 mm		3000 ns
LT3669EUFD-2#TRPBF	Analog Devices	LINE TRANSCEIVER	OTHER	NO LEAD	28	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	40 V	1	BIPOLAR		6000 ns	GENERAL PURPOSE	6 mA	SCHMITT TRIGGER	24 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.16X.2,20				7.5 V	.5 mm	125 Cel		OPEN-COLLECTOR	0 Cel	2	Matte Tin (Sn) - annealed	QUAD	R-PQCC-N28	1	.8 mm	4 mm				1		NO	e3		260	5 mm		6500 ns
ADM561JRS-REEL	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS		1000 ns	EIA-232; TIA-232	3 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		2.97 V	.65 mm	70 Cel		TOTEM-POLE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e0		240	10.2 mm	10 V	2000 ns
ADM5180AP	Analog Devices	LINE RECEIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS			EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel		TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified	4 Amp	TRUE	8		NO	e0		225	11.505 mm		550 ns
ADM560JRSZ-REEL	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS		1000 ns	EIA-232; TIA-232	3 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		2.97 V	.65 mm	70 Cel		TOTEM-POLE	0 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e3		260	10.2 mm	10 V	2000 ns
LT1537CG#TR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	BIPOLAR		1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	70 Cel		3-STATE	0 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified		INVERTED	5	EXTERNAL CHARGE PUMP	NO	e0			10.2 mm		600 ns
LT6301IFE#TR	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					5 V	.65 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified					YES	e0			9.7 mm

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.