28 Line Drivers & Receivers 2,129

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
MAX3212CAI+	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		2000 ns	EIA-232-E; V.24; V.28; EIA-562	3 mA	SCHMITT TRIGGER	3.3 V	3/3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Line Driver or Receivers	.000001 Amp	2.7 V	.65 mm	70 Cel	3-STATE	0 Cel	3	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	1 Amp	INVERTED	5	ADDITIONAL OUTPUT FOR 1 RECEIVER; TRISTATABLE RECEIVERS; AUTO SHUTDOWN	NO	e3	30	260	10.2 mm	5 V	2000 ns
MAX3243EEAI+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	BICMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3-STATE	-40 Cel	3	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e3	30	260	10.2 mm	5 V	0 ns
MAX213ECAI+T	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-232-E; TIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V	5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Line Driver or Receivers		4.5 V	.65 mm	70 Cel	3-STATE	0 Cel	4	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	5	2 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3	30	260	10.2 mm	10 V	40000 ns
MAX213EEAI+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-232-E; TIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V	5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Line Driver or Receivers		4.5 V	.65 mm	85 Cel	3-STATE	-40 Cel	4	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	5	2 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3	30	260	10.2 mm	10 V	40000 ns
MAX3244EEWI+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	BICMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.3/5		SMALL OUTLINE	SOP28,.4	Line Driver or Receivers		3 V	1.27 mm	85 Cel		-40 Cel	3	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp		5		NO	e3	30	260	17.9 mm	10 V	0 ns
MAX213EEWI+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-232-E; TIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V	5		SMALL OUTLINE	SOP28,.4	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	3-STATE	-40 Cel	4	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5	2 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3	30	260	17.9 mm	10 V	40000 ns
MAX3243EEWI+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	BICMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3/5		SMALL OUTLINE	SOP28,.4	Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	85 Cel		-40 Cel	3	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp		5		NO	e3	30	260	17.9 mm	5 V	0 ns
MAX213ECAI+	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-232-E; TIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V	5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Line Driver or Receivers		4.5 V	.65 mm	70 Cel	3-STATE	0 Cel	4	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	5	2 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3	30	260	10.2 mm	10 V	40000 ns
MAX3170CAI+	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	3			80 ns	EIA-232; V.11; V.28; V.35; V.36; X.21; EIA-422; EIA-449; EIA-530; EIA-530-A		SCHMITT TRIGGER	3.3 V			SMALL OUTLINE, SHRINK PITCH				3.135 V	.65 mm	70 Cel		0 Cel	3	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified			3		NO	e3	30	260	10.2 mm		120 ns
MAX3172CAI+	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	1				EIA-232; V.10; V.11; V.28; V.35; V.36; X.21; EIA-422; EIA-423; EIA-449; EIA-530; EIA-530-A	.75 mA	SCHMITT TRIGGER	3.3 V	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Line Driver or Receivers	.000001 Amp	3.135 V	.65 mm	70 Cel		0 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp		1		NO	e3	30	260	10.2 mm	8 V	15000 ns
MAX3241ECAI+T	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	BICMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Line Driver or Receivers		3 V	.65 mm	70 Cel		0 Cel	3	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp		5		NO	e3	30	260	10.2 mm	10 V	0 ns
MAX3245ECAI+	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	BICMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel		0 Cel	3	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp		5		NO	e3	30	260	10.2 mm	5 V	150 ns
MAX3241ECUI+	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	BICMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Line Driver or Receivers		3 V	.65 mm	70 Cel		0 Cel	3	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.1 mm	4.4 mm	Not Qualified	1.6 Amp		5		NO	e3	30	260	9.7 mm	10 V	0 ns
MAX3238CAI+	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS			EIA-232; TIA-232; V.24; V.28	2 mA	SCHMITT TRIGGER	5 V	3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel	3-STATE	0 Cel	5	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	3		NO	e3	30	260	10.2 mm	10 V	0 ns
MAX3237CAITR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS			EIA-232; EIA-562		SCHMITT TRIGGER	5 V			SMALL OUTLINE, SHRINK PITCH				3 V	.65 mm	70 Cel		0 Cel	5		DUAL	R-PDSO-G28		1.99 mm	5.29 mm				3		NO				10.2 mm
MAX3241EEWI+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	BICMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.3/5		SMALL OUTLINE	SOP28,.4	Line Driver or Receivers		3 V	1.27 mm	85 Cel		-40 Cel	3	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp		5		NO	e3	30	260	17.9 mm	10 V	0 ns
MAX13326GUI/V+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES			BCDMOS	AEC-Q100					14.4 V	14.4		SMALL OUTLINE	TSSOP28,.25	Line Driver or Receivers			.635 mm	105 Cel		-40 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1			Not Qualified					YES	e3	30	260		8.4 V	0 ns
MAX214CPI+	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	CMOS		3500 ns	EIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V	5		IN-LINE	DIP28(UNSPEC)	Line Driver or Receivers		4.5 V	2.54 mm	70 Cel	3-STATE	0 Cel	3	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T28	1	5.08 mm	15.24 mm	Not Qualified	3.2 Amp	INVERTED	5	5 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; PROGRAMMABLE DTE/DCE	NO	e3	30	260	36.83 mm	5 V	1500 ns
MAX13325GUI/V+T	Analog Devices		INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES			BCDMOS	AEC-Q100					14.4 V	14.4		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Line Driver or Receivers			.635 mm	105 Cel		-40 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1			Not Qualified					YES	e3	30	260		8.4 V	0 ns
MAX3244EEAI+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	BICMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel		-40 Cel	3	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp		5		NO	e3	30	260	10.2 mm	5 V	0 ns
MAX241ECWI+T	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-232-E; TIA-232-E; V.28	15 mA	SCHMITT TRIGGER	5 V	5		SMALL OUTLINE	SOP28,.4	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	3-STATE	0 Cel	4	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5	TRISTATABLE RECEIVERS; EXTERNAL CHARGE PUMP	NO	e3	30	260	17.9 mm	10 V	10000 ns
MAX241ECWI+	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-232-E; TIA-232-E; V.28	15 mA	SCHMITT TRIGGER	5 V	5		SMALL OUTLINE	SOP28,.4	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	3-STATE	0 Cel	4	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5	TRISTATABLE RECEIVERS; EXTERNAL CHARGE PUMP	NO	e3	30	260	17.9 mm	10 V	10000 ns
MAX3162EAI+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2			800 ns	EIA-232; EIA-422; EIA-485	6 mA	SCHMITT TRIGGER	3.3 V	3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Line Driver or Receivers		3 V	.65 mm	85 Cel		-40 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	2.5 Amp		2	DELAYS MEASURED IN EIA-422, EIA-485 MODE	NO	e3	30	260	10.2 mm	10 V	150 ns
MAX3158EAI+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	HYBRID		2000 ns	EIA-422; EIA-485; TIA-485	85 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Line Driver or Receivers		4.75 V	.65 mm	85 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	4 Amp		1		YES	e3	30	260	10.2 mm	1.5 V	600 ns
MAX3241EAI+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS			EIA-232; EIA-562	1 mA	SCHMITT TRIGGER	5 V	3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Line Driver or Receivers		3 V	.65 mm	85 Cel	3-STATE	-40 Cel	3	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	5	5 RECEIVERS ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVERS; EXTERNAL CHARGE PUMP	NO	e3	30	260	10.2 mm	10 V	0 ns
MAX3302EETI+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	UNSPECIFIED	YES	4.5 V	1	BICMOS		25 ns	GENERAL PURPOSE	10 mA	DIFFERENTIAL	3.7 V	1.8/3.3,3/4.5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.16SQ,16	Line Driver or Receivers		3 V	.4 mm	85 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N28	1	.8 mm	4 mm	Not Qualified	1 Amp		3		YES	e3	30	260	4 mm	2.8 V	30 ns
MAX241ECAI+	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-232-E; TIA-232-E; V.28	15 mA	SCHMITT TRIGGER	5 V	5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Line Driver or Receivers		4.5 V	.65 mm	70 Cel	3-STATE	0 Cel	4	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp	INVERTED	5	TRISTATABLE RECEIVERS; EXTERNAL CHARGE PUMP	NO	e3	30	260	10.2 mm	10 V	10000 ns
MAX3241ECUI+T	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	BICMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Line Driver or Receivers		3 V	.65 mm	70 Cel		0 Cel	3	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.1 mm	4.4 mm	Not Qualified	1.6 Amp		5		NO	e3	30	260	9.7 mm	10 V	0 ns
MAX3174CAI+T	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	1				EIA-232; V.10; V.11; V.28; V.35; V.36; X.21; EIA-422; EIA-423; EIA-449; EIA-530; EIA-530-A	.75 mA	SCHMITT TRIGGER	3.3 V	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Line Driver or Receivers	.000001 Amp	3.135 V	.65 mm	70 Cel		0 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp		1		NO	e3	30	260	10.2 mm	8 V	120 ns
MAX3232EEAI	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				EIA-232; V.24; V.28		SCHMITT TRIGGER	3.3 V			SMALL OUTLINE, SHRINK PITCH				3 V	.65 mm	85 Cel		-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G28		1.99 mm	5.29 mm	Not Qualified			2		NO	e0			10.2 mm
MAX213CWI+T	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-232-E; TIA-232-E; V.28		SCHMITT TRIGGER	5 V	5		SMALL OUTLINE	SOP28,.4	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	3-STATE	0 Cel	4	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5	2 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3	30	260	17.9 mm	10 V	40000 ns
MAX3243CWI+	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS			EIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.3/5		SMALL OUTLINE	SOP28,.4	Line Driver or Receivers		3 V	1.27 mm	70 Cel	3-STATE	0 Cel	3	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5	5 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; AUTO SHUTDOWN	NO	e3	30	260	17.9 mm	5 V	0 ns
MAX214EWI+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		3500 ns	EIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V	5		SMALL OUTLINE	SO28(UNSPEC)	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	3-STATE	-40 Cel	3	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	3.2 Amp	INVERTED	5	5 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; PROGRAMMABLE DTE/DCE	NO	e3	30	260	17.9 mm	5 V	1500 ns
MAX3245CWI+T	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS			EIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.3/5		SMALL OUTLINE	SOP28,.4	Line Driver or Receivers		3 V	1.27 mm	70 Cel		0 Cel	3	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp		5		NO	e3			17.9 mm	10 V	0 ns
MAX3237ECAI+	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	BICMOS			EIA-232; TIA-232; V.24; V.28	2 mA	SCHMITT TRIGGER	3.3 V	3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Line Driver or Receivers		3 V	.65 mm	70 Cel		0 Cel	5	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	1 Amp		3		NO	e3	30	260	10.2 mm	10 V	0 ns
MAX3244EAI+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Line Driver or Receivers		3 V	.65 mm	85 Cel		-40 Cel	3	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	1.6 Amp		5		NO	e3	30	260	10.2 mm	10 V	0 ns
MAX211CWI+T	Analog Devices	LINE DRIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-232-E; TIA-232-E; V.28		SCHMITT TRIGGER	5 V	5		SMALL OUTLINE	SOP28,.4	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	3-STATE	0 Cel	4	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5	TRISTATABLE RECEIVERS; EXTERNAL CHARGE PUMP	NO	e3	30	260	17.9 mm	10 V	10000 ns
MAX214EWI+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		3500 ns	EIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V	5		SMALL OUTLINE	SO28(UNSPEC)	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	3-STATE	-40 Cel	3	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	3.2 Amp	INVERTED	5	5 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; PROGRAMMABLE DTE/DCE	NO	e3	30	260	17.9 mm	5 V	1500 ns
MAX213EWI+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-232-E; TIA-232-E; V.28	20 mA	SCHMITT TRIGGER	5 V	5		SMALL OUTLINE	SOP28,.4	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	3-STATE	-40 Cel	4	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5	2 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3	30	260	17.9 mm	10 V	40000 ns
MAX3162ECAI+	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		800 ns	EIA-232; EIA-422; EIA-485	6 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Line Driver or Receivers		3 V	.65 mm	70 Cel		0 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified	2.5 Amp		2		YES	e3	30	260	10.2 mm	10 V	150 ns
100314QCX	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	-5.7 V	5	ECL		1.8 ns		30 mA	DIFFERENTIAL			-5 V	CHIP CARRIER	LDCC28,.5SQ		.00024 Amp	-4.2 V	1.27 mm	85 Cel	DIFFERENTIAL	0 Cel	1		QUAD	S-PQCC-J28		4.57 mm	11.48 mm			COMPLEMENTARY	1		YES				11.48 mm	.15 V	1.8 ns
100314QIX	Onsemi	LINE RECEIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	-5.7 V	5	ECL		1.8 ns		30 mA	DIFFERENTIAL			-5 V	CHIP CARRIER	LDCC28,.5SQ		.00024 Amp	-4.2 V	1.27 mm	85 Cel	DIFFERENTIAL	-40 Cel	1		QUAD	S-PQCC-J28		4.57 mm	11.48 mm			COMPLEMENTARY	1		YES				11.48 mm	.15 V	1.8 ns
100314QI	Onsemi	LINE RECEIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	-5.7 V	5	ECL		1.8 ns		30 mA	DIFFERENTIAL			-5 V	CHIP CARRIER	LDCC28,.5SQ		.00024 Amp	-4.2 V	1.27 mm	85 Cel	DIFFERENTIAL	-40 Cel	1		QUAD	S-PQCC-J28		4.57 mm	11.48 mm			COMPLEMENTARY	1		YES				11.48 mm	.15 V	1.8 ns
100314QC	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	-5.7 V	5	ECL		1.8 ns		30 mA	DIFFERENTIAL			-5 V	CHIP CARRIER	LDCC28,.5SQ		.00024 Amp	-4.2 V	1.27 mm	85 Cel	DIFFERENTIAL	0 Cel	1		QUAD	S-PQCC-J28		4.57 mm	11.48 mm			COMPLEMENTARY	1		YES				11.48 mm	.15 V	1.8 ns
AMIS39100PNPB3RG	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	8				GENERAL PURPOSE		STANDARD	3.3 V	3.3/5		SMALL OUTLINE	SOP28,.4	Peripheral Drivers		3.1 V	1.27 mm	105 Cel		-40 Cel	8	TIN	DUAL	R-PDSO-G28	2	2.6416 mm	7.52 mm	Not Qualified					NO	e3	30	260	17.8816 mm		0 ns
AMIS39100AGA	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1						STANDARD				SMALL OUTLINE				3.1 V	1.27 mm	105 Cel		-40 Cel	8		DUAL	R-PDSO-G28		2.642 mm	7.5 mm	Not Qualified					NO				17.88 mm		0 ns
MC10E116FNR2G	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL			GENERAL PURPOSE	35 mA	DIFFERENTIAL	5 V	-5.2	-5.2 V	CHIP CARRIER	LDCC28,.5SQ	Line Driver or Receivers		4.2 V	1.27 mm	85 Cel		0 Cel		TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e3	30	260	11.505 mm		.45 ns
MC100E116FNR2G	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL			GENERAL PURPOSE	40 mA	DIFFERENTIAL	5 V	-4.5	-4.5 V	CHIP CARRIER	LDCC28,.5SQ	Line Driver or Receivers		4.2 V	1.27 mm	85 Cel		0 Cel		MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e3	30	260	11.505 mm		.45 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.