28 Line Drivers & Receivers 2,129

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
MC100E416FNR2G	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL		GENERAL PURPOSE	186 mA	DIFFERENTIAL	5 V		-4.5	-4.5 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel		0 Cel		TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e3		260	11.505 mm		.5 ns
MC10E416FN	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL		GENERAL PURPOSE	162 mA	DIFFERENTIAL	5 V		-5.2	-5.2 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel		0 Cel		TIN LEAD	QUAD	S-PQCC-J28		4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e0		235	11.505 mm		.5 ns
MC100E116FN	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL		GENERAL PURPOSE	40 mA	DIFFERENTIAL	5 V		-4.5	-4.5 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel		0 Cel		TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e0		235	11.505 mm		.45 ns
MC100E416FNG	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL		GENERAL PURPOSE	186 mA	DIFFERENTIAL	5 V		-4.5	-4.5 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel		0 Cel		TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e3		260	11.505 mm		.5 ns
MC10E416FNR2G	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL		GENERAL PURPOSE	162 mA	DIFFERENTIAL	5 V		-5.2	-5.2 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel		0 Cel		TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e3	30	260	11.505 mm		.5 ns
MC10E116FNR2	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL		GENERAL PURPOSE	35 mA	DIFFERENTIAL	5 V		-5.2	-5.2 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel		0 Cel		TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e0		235	11.505 mm		.45 ns
MC10E416FNG	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL		GENERAL PURPOSE	162 mA	DIFFERENTIAL	5 V		-5.2	-5.2 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel		0 Cel		TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e3		260	11.505 mm		.5 ns
MC10E416FNR2	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL		GENERAL PURPOSE	162 mA	DIFFERENTIAL	5 V		-5.2	-5.2 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel		0 Cel		TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e0		235	11.505 mm		.5 ns
MC100E116FNG	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL		GENERAL PURPOSE	40 mA	DIFFERENTIAL	5 V		-4.5	-4.5 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel		0 Cel		MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e3	30	260	11.505 mm		.45 ns
MC100E416FNR2	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL		GENERAL PURPOSE	186 mA	DIFFERENTIAL	5 V		-4.5	-4.5 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel		0 Cel		TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e0		235	11.505 mm		.5 ns
MC100E116FNR2	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL		GENERAL PURPOSE	40 mA	DIFFERENTIAL	5 V		-4.5	-4.5 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel		0 Cel		TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e0		235	11.505 mm		.45 ns
MC100E416FN	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL		GENERAL PURPOSE	186 mA	DIFFERENTIAL	5 V		-4.5	-4.5 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel		0 Cel		TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e0		235	11.505 mm		.5 ns
MC10E116FN	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL		GENERAL PURPOSE	35 mA	DIFFERENTIAL	5 V		-5.2	-5.2 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel		0 Cel		TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e0		235	11.505 mm		.45 ns
ST10G32245TTR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	6.2 ns	GENERAL PURPOSE			3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					1.8 V	.65 mm	85 Cel		-40 Cel	10		DUAL	R-PDSO-G28		1.2 mm	4.4 mm	Not Qualified			10	IT ALSO NEED 1.4 TO 2.7 VOLT SUPPLY	NO				9.7 mm		6.2 ns
STLV3243EBTR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3			EIA-232	1 mA	SCHMITT TRIGGER	3 V		2.5/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers		2.3 V	.65 mm	85 Cel		-40 Cel	3		DUAL	R-PDSO-G28		1.2 mm	4.4 mm	Not Qualified	1.6 Amp		5		NO				9.7 mm	7.4 V	0 ns
STLV3243EBPR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3			EIA-232	1 mA	SCHMITT TRIGGER	3 V		2.5/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		2.3 V	.65 mm	85 Cel		-40 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28		2 mm	5.3 mm	Not Qualified	1.6 Amp		5		NO	e4			10.2 mm	7.4 V	0 ns
STLV3243ECPR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3			EIA-232	1 mA	SCHMITT TRIGGER	3 V		2.5/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		2.3 V	.65 mm	85 Cel		-40 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28		2 mm	5.3 mm	Not Qualified	1.6 Amp		5		NO	e4			10.2 mm	7.4 V	0 ns
STLV3243ECTR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3			EIA-232	1 mA	SCHMITT TRIGGER	3 V		2.5/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers		2.3 V	.65 mm	85 Cel		-40 Cel	3		DUAL	R-PDSO-G28		1.2 mm	4.4 mm	Not Qualified	1.6 Amp		5		NO				9.7 mm	7.4 V	0 ns
L6180A	STMicroelectronics	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	8	BIPOLAR		EIA-232D; V.10; V.11; V.28; X.26; EIA-422-A; EIA-423-A		DIFFERENTIAL SCHMITT TRIGGER	5 V	13.5 V	5,+-9/+-13.5		IN-LINE	DIP28,.6	9 V	Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		0 Cel		TIN LEAD	DUAL	R-PDIP-T28		4.445 mm	15.24 mm	Not Qualified	2 Amp		1			e0			36.83 mm		1500 ns
STLV3243EBDR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3			EIA-232	1 mA	SCHMITT TRIGGER	3 V		2.5/5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		2.3 V	1.27 mm	85 Cel		-40 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28		2.65 mm	7.5 mm	Not Qualified	1.6 Amp		5		NO	e4			17.9 mm	7.4 V	0 ns
STLV3243ECJR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	BALL	28	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3			EIA-232	1 mA	SCHMITT TRIGGER	3 V		2.5/5		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA28,5X6,20		Line Driver or Receivers		2.3 V	.5 mm	85 Cel		-40 Cel	3		BOTTOM	R-PBGA-B28		.95 mm	2.57 mm	Not Qualified	1.6 Amp		5		NO				4.07 mm	7.4 V	0 ns
L6181A	STMicroelectronics	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	8	BIPOLAR		EIA-232D; V.10; V.11; V.28; X.26; EIA-422-A; EIA-423-A		DIFFERENTIAL SCHMITT TRIGGER	5 V	13.5 V	5,+-9/+-13.5		IN-LINE	DIP28,.6	9 V	Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		0 Cel		TIN LEAD	DUAL	R-PDIP-T28		4.445 mm	15.24 mm	Not Qualified	2 Amp		1			e0			36.83 mm		1500 ns
L6181D	STMicroelectronics	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	8	BIPOLAR		EIA-232D; V.10; V.11; V.28; X.26; EIA-422-A; EIA-423-A		DIFFERENTIAL SCHMITT TRIGGER	5 V	13.5 V	5,+-9/+-13.5		CHIP CARRIER	LDCC28,.5SQ	9 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		0 Cel		TIN LEAD	QUAD	S-PQCC-J28		4.57 mm	11.5062 mm	Not Qualified	2 Amp		1			e0			11.5062 mm		1500 ns
STLV3243ECD	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3			EIA-232	1 mA	SCHMITT TRIGGER	3 V		2.5/5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		2.3 V	1.27 mm	85 Cel		-40 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28		2.65 mm	7.5 mm	Not Qualified	1.6 Amp		5		NO	e4			17.9 mm	7.4 V	0 ns
L5170D	STMicroelectronics	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1	BIPOLAR	900 ns	EIA-232-D; V.10; V.28; EIA-423-A		STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.00004 Amp	9 V	1.27 mm	70 Cel	3-STATE	0 Cel	8	MATTE TIN	QUAD	S-PQCC-J28		4.57 mm	11.5062 mm	Not Qualified		INVERTED			NO	e3			11.5062 mm	9 V
L6180D	STMicroelectronics	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	8	BIPOLAR		EIA-232D; V.10; V.11; V.28; X.26; EIA-422-A; EIA-423-A		DIFFERENTIAL SCHMITT TRIGGER	5 V	13.5 V	5,+-9/+-13.5		CHIP CARRIER	LDCC28,.5SQ	9 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		0 Cel		TIN LEAD	QUAD	S-PQCC-J28		4.57 mm	11.5062 mm	Not Qualified	2 Amp		1			e0			11.5062 mm		1500 ns
STLV3243EBD	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3			EIA-232	1 mA	SCHMITT TRIGGER	3 V		2.5/5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		2.3 V	1.27 mm	85 Cel		-40 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28		2.65 mm	7.5 mm	Not Qualified	1.6 Amp		5		NO	e4			17.9 mm	7.4 V	0 ns
STLV3243EBJR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	BALL	28	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3			EIA-232; EIA-562; TIA-562	1 mA	SCHMITT TRIGGER	3 V		2.5/5		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA28,5X6,20		Line Driver or Receivers		2.3 V	.5 mm	85 Cel		-40 Cel	3	TIN LEAD	BOTTOM	R-PBGA-B28		.95 mm	2.57 mm	Not Qualified	1.6 Amp		5		NO	e0			4.07 mm	7.4 V	0 ns
STLV3243CDR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3			EIA-232	1 mA	SCHMITT TRIGGER	3 V		2.5/5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		2.3 V	1.27 mm	85 Cel		-40 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28		2.65 mm	7.5 mm	Not Qualified	1.6 Amp		5		NO	e4			17.9 mm	7.4 V	0 ns
L5170A	STMicroelectronics	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	11 V	1	BIPOLAR	900 ns	EIA-232-D; V.10; V.28; EIA-423-A		STANDARD	10 V		+-10	-10 V	IN-LINE	DIP28,.6		Line Driver or Receivers	.00004 Amp	9 V	2.54 mm	70 Cel	3-STATE	0 Cel	8	MATTE TIN	DUAL	R-PDIP-T28			15.24 mm	Not Qualified		INVERTED			NO	e3				9 V	0 ns
ST3237EBDR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	85 Cel		-40 Cel	5	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28		2.65 mm	7.5 mm	Not Qualified	1 Amp		3	1 MEGA BITS PER SECOND DATA RATE POSSIBLE	NO	e4			17.9 mm	10 V	0 ns
ST3243EBDR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3			EIA-232; TIA-232; V.24; V.28	1 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel		-40 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28		2.65 mm	7.5 mm	Not Qualified	1.6 Amp		5		NO	e4			17.9 mm	5 V	0 ns
ST3243ECTR	STMicroelectronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers		3 V	.65 mm	70 Cel		0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28		1.2 mm	4.4 mm	Not Qualified	1.6 Amp		5		NO	e4		260	9.7 mm	5 V	0 ns
ST3243BPR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel		-40 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28		2 mm	5.3 mm	Not Qualified	1.6 Amp		5		NO	e4			10.2 mm	10 V	0 ns
ST3237EBTR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3			EIA-232; TIA-232; V.24; V.28	1 mA	STANDARD	3.3 V		3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel		-40 Cel	5		DUAL	R-PDSO-G28		1.2 mm	4.4 mm	Not Qualified	1 Amp		3		NO				9.7 mm	10 V	0 ns
ST3237CPR	STMicroelectronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3			EIA-232; TIA-232; V.24; V.28	2 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	70 Cel		0 Cel	5	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28		2 mm	5.3 mm	Not Qualified	1.6 Amp		3		NO	e4			10.2 mm	10 V	0 ns
ST3243CTR	STMicroelectronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers		3 V	.65 mm	70 Cel		0 Cel	3	Matte Tin (Sn)	DUAL	R-PDSO-G28	3	1.2 mm	4.4 mm	Not Qualified	1.6 Amp		5		NO	e3	30	260	9.7 mm	10 V	0 ns
ST3243EBJR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	BALL	28	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3			EIA-232; TIA-232; V.24; V.28	1 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3/5		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA28,5X6,20		Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel	3		BOTTOM	R-PBGA-B28		.95 mm	2.57 mm	Not Qualified	1.6 Amp		5		NO		40	260	4.07 mm	5 V	0 ns
ST3241ECDR	STMicroelectronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		3 V	1.27 mm	70 Cel		0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28		2.65 mm	7.5 mm	Not Qualified	1.6 Amp		5		NO	e4			17.9 mm	10 V	0 ns
ST3241EBDR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel		-40 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28		2.65 mm	7.5 mm	Not Qualified	1.6 Amp		5		NO	e4			17.9 mm	10 V	0 ns
ST3243EBPR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3			EIA-232; TIA-232; V.24; V.28	1 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel		-40 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28		2 mm	5.3 mm	Not Qualified	1.6 Amp		5		NO	e4			10.2 mm	5 V	0 ns
ST3237BPR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3			EIA-232; TIA-232; V.24; V.28	2 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel		-40 Cel	5	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28		2 mm	5.3 mm	Not Qualified	1.6 Amp		3		NO	e4			10.2 mm	10 V	0 ns
ST3237ECPR	STMicroelectronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel		0 Cel	5	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28		2 mm	5.3 mm	Not Qualified	1 Amp		3	1 MEGA BITS PER SECOND DATA RATE POSSIBLE	NO	e4			10.2 mm	10 V	0 ns
ST3237CDR	STMicroelectronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3			EIA-232; TIA-232; V.24; V.28	2 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		3 V	1.27 mm	70 Cel		0 Cel	5	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G28		2.65 mm	7.5 mm	Not Qualified	1.6 Amp		3		NO	e4			17.9 mm	10 V	0 ns
ST3243BTR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel		-40 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28		1.2 mm	4.4 mm	Not Qualified	1.6 Amp		5		NO	e4		260	9.7 mm	10 V	0 ns
ST3237ECTR	STMicroelectronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3			EIA-232; TIA-232; V.24; V.28	1 mA	STANDARD	3.3 V		3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel		0 Cel	5		DUAL	R-PDSO-G28		1.2 mm	4.4 mm	Not Qualified	1 Amp		3		NO				9.7 mm	10 V	0 ns
ST3243ECDR	STMicroelectronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3			EIA-232; TIA-232; V.24; V.28	1 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		3 V	1.27 mm	70 Cel		0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28		2.65 mm	7.5 mm	Not Qualified	1.6 Amp		5		NO	e4			17.9 mm	5 V	0 ns
ST3243ECPR	STMicroelectronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3			EIA-232; TIA-232; V.24; V.28	1 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	70 Cel		0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28		2 mm	5.3 mm	Not Qualified	1.6 Amp		5		NO	e4			10.2 mm	5 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.