HTSSOP Line Drivers & Receivers 122

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
LTC2870IFE#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		CMOS	70 ns	EIA-232; EIA-422; EIA-485	.005 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	3 V			1.7 V	.65 mm	85 Cel	3.3 V		-40 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.2 mm		4.4 mm	Not Qualified	3 Amp		2		YES	e3	30	260	9.7 mm	1.5 V	200 ns
LTC2865HMSE#PBF	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	12	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS	1500 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	125 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G12	1	1.1 mm		3 mm				1		YES	e3	30	260	4.039 mm		65 ns
LTC2865IMSE#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	12	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS	1500 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G12	1	1.1 mm		3 mm				1		YES	e3	30	260	4.039 mm		65 ns
LTC2870IFE#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		CMOS	70 ns	EIA-232; EIA-422; EIA-485	.005 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	3 V			1.7 V	.65 mm	85 Cel	3.3 V		-40 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.2 mm		4.4 mm	Not Qualified	3 Amp		2		YES	e3	30	260	9.7 mm	1.5 V	200 ns
LTC2865IMSE#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	12	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS	1500 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G12	1	1.1 mm		3 mm				1		YES	e3	30	260	4.039 mm		65 ns
LTC2865HMSE#TRPBF	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	12	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS	1500 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	125 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G12	1	1.1 mm		3 mm				1		YES	e3	30	260	4.039 mm		65 ns
SN65HVS880PWPR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	34 V	1			10 ns	GENERAL PURPOSE	8.7 mA	STANDARD	24 V	30 V	24		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	18 V	Line Driver or Receivers		18 V	.65 mm	85 Cel	24 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G28	2	1.2 mm		4.4 mm	Not Qualified		TRUE			NO	e4	NOT SPECIFIED	260	9.7 mm	4 V	0 ns
LTC2870CFE#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		CMOS	70 ns	EIA-232; EIA-422; EIA-485	.005 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	3 V			1.7 V	.65 mm	70 Cel	3.3 V		0 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.2 mm		4.4 mm	Not Qualified	3 Amp		2		YES	e3	30	260	9.7 mm	1.5 V	200 ns
LTC2879XMS8E#PBF	Analog Devices	LINE TRANSCEIVER		GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS	50 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					3 V	.65 mm					1	MATTE TIN	DUAL	S-PDSO-G8	1	1.1 mm		3 mm				1		YES	e3	30	260	3 mm		75 ns
LTC2870CFE#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		CMOS	70 ns	EIA-232; EIA-422; EIA-485	.005 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	3 V			1.7 V	.65 mm	70 Cel	3.3 V		0 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.2 mm		4.4 mm	Not Qualified	3 Amp		2		YES	e3	30	260	9.7 mm	1.5 V	200 ns
LTC2865CMSE#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	12	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS	1500 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	70 Cel			0 Cel	1	MATTE TIN	DUAL	R-PDSO-G12	1	1.1 mm		3 mm				1		YES	e3	30	260	4.039 mm		65 ns
SN65HVS880PWPRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	30 V	1			10 ns	GENERAL PURPOSE	8.7 mA	STANDARD	24 V		24		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers		18 V	.65 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	2	1.2 mm		4.4 mm	Not Qualified						e4	30	260	9.7 mm		0 ns
LTC2865CMSE#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	12	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS	1500 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	70 Cel			0 Cel	1	MATTE TIN	DUAL	R-PDSO-G12	1	1.1 mm		3 mm				1		YES	e3	30	260	4.039 mm		65 ns
SN65HVS880PWP	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	34 V	1			10 ns	GENERAL PURPOSE	8.7 mA	STANDARD	24 V	30 V	24		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	18 V	Line Driver or Receivers		18 V	.65 mm	85 Cel	24 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G28	2	1.2 mm		4.4 mm	Not Qualified		TRUE			NO	e4	NOT SPECIFIED	260	9.7 mm	4 V	0 ns
SN65HVS880PWPG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	30 V	1			10 ns	GENERAL PURPOSE	8.7 mA	STANDARD	24 V		24		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers		18 V	.65 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	2	1.2 mm		4.4 mm	Not Qualified						e4	30	260	9.7 mm		0 ns
SN65LVDS9638DGNR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS	2.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-G8	1	1.07 mm		3 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	3 mm	.247 V	0 ns
THS6072IDGNRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	16.5 V	2		BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	15 V		+-5/+-15	-15 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		4.5 V	.65 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.07 mm		3 mm	Not Qualified			2	ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO	e4	30	260	3 mm		0 ns
SN65HVS882PWPR	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	34 V	1			10 ns	GENERAL PURPOSE	8.7 mA	STANDARD	12 V	34 V	10/34		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	10 V	Line Driver or Receivers		10 V	.65 mm	125 Cel	12 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G28	2	1.2 mm		4.4 mm	Not Qualified		TRUE			NO	e4	NOT SPECIFIED	260	9.7 mm	4 V	0 ns
SN65LVDS9637DGNR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		EIA-644; TIA-644	10 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-G8	1	1.07 mm		3 mm	Not Qualified	8 Amp	TRUE	2		NO	e4	NOT SPECIFIED	260	3 mm		3 ns
SN65LVDS9638DGNRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS	2.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.07 mm		3 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	3 mm	.247 V	0 ns
SN65LVDS9638DGN	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS	2.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	SOP8,.19	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-G8	1	1.07 mm		3 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	3 mm	.247 V	0 ns
SN65LVDS9637DGNRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		EIA-644; TIA-644	10 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.07 mm		3 mm	Not Qualified	8 Amp	TRUE	2		NO	e4	30	260	3 mm		3 ns
LTC2871CFE#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	38	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		CMOS	70 ns	EIA-232; EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH		3 V			1.7 V	.5 mm	70 Cel	3.3 V		0 Cel	3	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G38	1	1.2 mm		4.4 mm	Not Qualified			3		YES	e3	30	260	9.7 mm		200 ns
THC63LVD1027	Thine Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	64	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	10				GENERAL PURPOSE	340 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP64,.32,20		Line Driver or Receivers		3 V	.5 mm	85 Cel		DIFFERENTIAL	-40 Cel	10	TIN BISMUTH	DUAL	R-PDSO-G24	3	1.1 mm		6.1 mm	Not Qualified		COMPLEMENTARY	10		YES	e6	10	260	17 mm	.1 V
LTC2871IFE#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	38	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		CMOS	70 ns	EIA-232; EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH		3 V			1.7 V	.5 mm	85 Cel	3.3 V		-40 Cel	3	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G38	1	1.2 mm		4.4 mm	Not Qualified			3		YES	e3	30	260	9.7 mm		200 ns
LTC2871CFE#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	38	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		CMOS	70 ns	EIA-232; EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH		3 V			1.7 V	.5 mm	70 Cel	3.3 V		0 Cel	3	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G38	1	1.2 mm		4.4 mm	Not Qualified			3		YES	e3	30	260	9.7 mm		200 ns
LTC2871IFE#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	38	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		CMOS	70 ns	EIA-232; EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH		3 V			1.7 V	.5 mm	85 Cel	3.3 V		-40 Cel	3	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G38	1	1.2 mm		4.4 mm	Not Qualified			3		YES	e3	30	260	9.7 mm		200 ns
LT1739IFE#TRPBF	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	20	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2		BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL					SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					5 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G20	1	1.2 mm		4.4 mm	Not Qualified					YES	e3			6.5 mm
LT1739IFE#TR	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	20	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2		BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL					SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					5 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G20	1	1.2 mm		4.4 mm	Not Qualified					YES	e0			6.5 mm
LTC2877IMSE#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	10	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS	50 ns	EIA-422; EIA-485	1.2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20			.00002 Amp	4.5 V	.5 mm	85 Cel		DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G10		1.1 mm		3 mm		3 Amp	COMPLEMENTARY	1	ALSO OPERATE WITH 3V SUPPLY	YES	e3			3 mm		70 ns
SN65HVS882PWPRG4	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	34 V	1			10 ns	GENERAL PURPOSE	8.7 mA	STANDARD	12 V	34 V	10/34		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	10 V	Line Driver or Receivers		10 V	.65 mm	125 Cel	12 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G28	2	1.2 mm		4.4 mm	Not Qualified		TRUE			NO	e4	NOT SPECIFIED	260	9.7 mm	4 V	0 ns
THC63LVD1027-MSTB	Thine Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	64	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	10				GENERAL PURPOSE	340 mA	DIFFERENTIAL	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP64,.32,20				3 V	.5 mm	85 Cel		DIFFERENTIAL	-40 Cel	10		DUAL	R-PDSO-G24		1.1 mm		6.1 mm			COMPLEMENTARY	10		YES				17 mm	.1 V
LTC2876CMS8E#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS	50 ns	EIA-422; EIA-485	1.2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP8,.19			.00002 Amp	4.5 V	.65 mm	70 Cel		DIFFERENTIAL	0 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	1	1.1 mm		3 mm		3 Amp	COMPLEMENTARY	1	ALSO OPERATE WITH 3V SUPPLY	YES	e3	30	260	3 mm		70 ns
LTC2877HMSE#PBF	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	10	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS	50 ns	EIA-422; EIA-485	1.2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20			.00002 Amp	4.5 V	.5 mm	125 Cel		DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G10		1.1 mm		3 mm		3 Amp	COMPLEMENTARY	1	ALSO OPERATE WITH 3V SUPPLY	YES	e3			3 mm		70 ns
LTC2879XMS8E#TRPBF	Analog Devices	LINE TRANSCEIVER		GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS	50 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					3 V	.65 mm					1		DUAL	S-PDSO-G8		1.1 mm		3 mm				1		YES		NOT SPECIFIED	NOT SPECIFIED	3 mm		75 ns
SN65HVS882PWP	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	34 V	1			10 ns	GENERAL PURPOSE	8.7 mA	STANDARD	12 V	34 V	10/34		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	10 V	Line Driver or Receivers		10 V	.65 mm	125 Cel	12 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G28	2	1.2 mm		4.4 mm	Not Qualified		TRUE			NO	e4	NOT SPECIFIED	260	9.7 mm	4 V	0 ns
SN65LVDS9637DGN	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	SSOP8,.19	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-G8	1	1.07 mm		3 mm	Not Qualified	.01 Amp	TRUE	2		NO	e4	NOT SPECIFIED	260	3 mm		3 ns
DRV604PWPR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.7 V	4	4			GENERAL PURPOSE	35 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.7 V	3.3		SMALL OUTLINE	TSSOP28,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	3	1.2 mm		4.4 mm	Not Qualified		TRUE			NO	e4	30	260	9.7 mm	6.15 V	0 ns
SNLVDS9638DGNG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS	2.5 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel		3-STATE	-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.07 mm		3 mm	Not Qualified					YES	e4	30	260	3 mm	.247 V	0 ns
DRV604PWP	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.7 V	4	4			GENERAL PURPOSE	35 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.7 V	3.3		SMALL OUTLINE	TSSOP28,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	3	1.2 mm		4.4 mm	Not Qualified		TRUE			NO	e4	30	260	9.7 mm	6.15 V	0 ns
TTHS6043IPWP	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2				GENERAL PURPOSE		DIFFERENTIAL	12 V			-12 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					5 V	.65 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G14		1.2 mm		4.4 mm	Not Qualified				CAN ALSO OPERATE WITH 10V TO 30V SINGLE SUPPLY	NO				5 mm		0 ns
THS6062IDGNRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	16 V	2	2	BIPOLAR		GENERAL PURPOSE	10.5 mA	DIFFERENTIAL	15 V	16 V		-15 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH		2.5 V			2.5 V	.65 mm	85 Cel	15 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.07 mm	.09 A	3 mm	Not Qualified		TRUE	2	ALSO OPERATES AT 5V TO 32V SINGLE SUPPLY	NO	e4	30	260	3 mm		0 ns
THS6043IPWPRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	14	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	12 V	15 V		-12 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH		5 V			5 V	.65 mm	85 Cel	12 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	2	1.2 mm	.35 A	4.4 mm	Not Qualified				ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO	e4	NOT SPECIFIED	260	5 mm		0 ns
THS6062CDGNR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	33 V	2	2	BIPOLAR		GENERAL PURPOSE	10.5 mA	DIFFERENTIAL	15 V	16 V		-15 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH		2.5 V			4.5 V	.65 mm	70 Cel	15 V		0 Cel		NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.07 mm	.09 A	3 mm	Not Qualified			2	ALSO OPERATES AT 5V TO 32V SINGLE SUPPLY	NO	e4	30	260	3 mm		0 ns
THS6007IPWP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	16 V	2		BIPOLAR		GENERAL PURPOSE	15 mA	DIFFERENTIAL	15 V		+-15	-15 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP28,.25		Line Driver or Receivers		4.5 V	.65 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G28		1.2 mm		4.4 mm	Not Qualified			2	ALSO OPERATES AT 9V TO 32V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	9.7 mm	12 V	0 ns
THS6043CPWPRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2		BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	12 V			-12 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					5 V	.65 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	2	1.2 mm		4.4 mm	Not Qualified				ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO	e4	30	260	5 mm		0 ns
THS6062CDGN	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	16 V	2	2	BIPOLAR		GENERAL PURPOSE	10.5 mA	DIFFERENTIAL	15 V	16 V		-15 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH		2.5 V			2.5 V	.65 mm	70 Cel	15 V		0 Cel		NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.07 mm	.09 A	3 mm	Not Qualified			2	ALSO OPERATES AT 5V TO 32V SINGLE SUPPLY	NO	e4	30	260	3 mm		0 ns
THS6062CDGNRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	16 V	2				GENERAL PURPOSE		DIFFERENTIAL	15 V			-15 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					2.5 V	.65 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.07 mm		3 mm	Not Qualified			2	ALSO OPERATES AT 5V TO 32V SINGLE SUPPLY	NO	e4	30	260	3 mm		0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.