HTSSOP Line Drivers & Receivers 122

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
LT1739CFE	Analog Devices	LINE DRIVER	OTHER	GULL WING	20	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL					SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					5 V	.65 mm	85 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified					YES	e0			6.5 mm
LTC2877IMSE#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	10	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS	50 ns	EIA-422; EIA-485	1.2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20			.00002 Amp	4.5 V	.5 mm	85 Cel		DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G10	1	1.1 mm	3 mm		3 Amp	COMPLEMENTARY	1	ALSO OPERATE WITH 3V SUPPLY	YES	e3	30	260	3 mm		70 ns
LT1739IFE#PBF	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	20	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL					SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					5 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified					YES	e3	30	260	6.5 mm
LTC2877CMSE#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	10	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS	50 ns	EIA-422; EIA-485	1.2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20			.00002 Amp	4.5 V	.5 mm	70 Cel		DIFFERENTIAL	0 Cel	1	MATTE TIN	DUAL	S-PDSO-G10	1	1.1 mm	3 mm		3 Amp	COMPLEMENTARY	1	ALSO OPERATE WITH 3V SUPPLY	YES	e3	30	260	3 mm		70 ns
LTC2877CMSE#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	10	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS	50 ns	EIA-422; EIA-485	1.2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20			.00002 Amp	4.5 V	.5 mm	70 Cel		DIFFERENTIAL	0 Cel	1	MATTE TIN	DUAL	S-PDSO-G10		1.1 mm	3 mm		3 Amp	COMPLEMENTARY	1	ALSO OPERATE WITH 3V SUPPLY	YES	e3			3 mm		70 ns
LTC2876HMS8E#TRPBF	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS	50 ns	EIA-422; EIA-485	1.2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP8,.19			.00002 Amp	4.5 V	.65 mm	125 Cel		DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	1	1.1 mm	3 mm		3 Amp	COMPLEMENTARY	1	ALSO OPERATE WITH 3V SUPPLY	YES	e3	30	260	3 mm		70 ns
LTC2877HMSE#TRPBF	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	10	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS	50 ns	EIA-422; EIA-485	1.2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20			.00002 Amp	4.5 V	.5 mm	125 Cel		DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G10	1	1.1 mm	3 mm		3 Amp	COMPLEMENTARY	1	ALSO OPERATE WITH 3V SUPPLY	YES	e3	30	260	3 mm		70 ns
MAX13450EAUD+	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	14	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS	800 ns	EIA-485; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	5.5 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH		4.5 V			1.6 V	.65 mm	125 Cel	5 V		-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G14	1	1.1 mm	4.4 mm	Not Qualified			1	THERMAL SHUTDOWN	YES	e3	30	260	5 mm		200 ns
MAX13451EAUD+	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	14	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS	800 ns	EIA-485; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	5.5 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH		4.5 V			1.6 V	.65 mm	125 Cel	5 V		-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G14	1	1.1 mm	4.4 mm	Not Qualified			1	THERMAL SHUTDOWN	YES	e3	30	260	5 mm		200 ns
MAX9482CUI	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2.75 V	1	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	2.5 V	5.25 V	+-5/+-2.5	-2.5 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	4.75 V	Line Driver or Receivers		2.25 V	.65 mm	85 Cel	5 V		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G28	1	1.1 mm	4.4 mm	Not Qualified			1	ALSO REQUIRES -5V SUPPLY	YES	e0			9.7 mm		0 ns
MAX9480CUP-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2.75 V	1	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	2.5 V	5.25 V	+-5/+-2.5	-2.5 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	4.75 V	Line Driver or Receivers		2.25 V	.65 mm	85 Cel	5 V		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G20	1	1.1 mm	4.4 mm	Not Qualified			1	ALSO REQUIRES -5V SUPPLY	YES	e0			6.5 mm		0 ns
MAX9481EUP	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2.75 V	1	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	2.5 V	5.25 V	+-5/+-2.5	-2.5 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	4.75 V	Line Driver or Receivers		2.25 V	.65 mm	85 Cel	5 V		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G20	1	1.1 mm	4.4 mm	Not Qualified			1	ALSO REQUIRES -5V SUPPLY	NO	e0			6.5 mm		0 ns
MAX9480CUP	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2.75 V	1	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	2.5 V	5.25 V	+-5/+-2.5	-2.5 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	4.75 V	Line Driver or Receivers		2.25 V	.65 mm	85 Cel	5 V		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G20	1	1.1 mm	4.4 mm	Not Qualified			1	ALSO REQUIRES -5V SUPPLY	YES	e0			6.5 mm		0 ns
MAX9482EUI	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2.75 V	1	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	2.5 V	5.25 V	+-5/+-2.5	-2.5 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	4.75 V	Line Driver or Receivers		2.25 V	.65 mm	85 Cel	5 V		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G28	1	1.1 mm	4.4 mm	Not Qualified			1	ALSO REQUIRES -5V SUPPLY	NO	e0		245	9.7 mm		0 ns
MAX9482CUI-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2.75 V	1	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	2.5 V	5.25 V	+-5/+-2.5	-2.5 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	4.75 V	Line Driver or Receivers		2.25 V	.65 mm	85 Cel	5 V		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G28	1	1.1 mm	4.4 mm	Not Qualified			1	ALSO REQUIRES -5V SUPPLY	YES	e0			9.7 mm		0 ns
MAX9481CUP	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2.75 V	1	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	2.5 V	5.25 V	+-5/+-2.5	-2.5 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	4.75 V	Line Driver or Receivers		2.25 V	.65 mm	85 Cel	5 V		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G20	1	1.1 mm	4.4 mm	Not Qualified			1	ALSO REQUIRES -5V SUPPLY	YES	e0			6.5 mm		0 ns
MAX9481CUP-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2.75 V	1	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	2.5 V	5.25 V	+-5/+-2.5	-2.5 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	4.75 V	Line Driver or Receivers		2.25 V	.65 mm	85 Cel	5 V		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G20	1	1.1 mm	4.4 mm	Not Qualified			1	ALSO REQUIRES -5V SUPPLY	YES	e0			6.5 mm		0 ns
MAX9480EUP	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	2.75 V	1	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	2.5 V	5.25 V	+-5/+-2.5	-2.5 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	4.75 V	Line Driver or Receivers		2.25 V	.65 mm	85 Cel	5 V		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G20	1	1.1 mm	4.4 mm	Not Qualified			1	ALSO REQUIRES -5V SUPPLY	NO	e0			6.5 mm		0 ns
MAX3388EEUG-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3 V	2			EIA-232; TIA-232; V.24; V.28		SCHMITT TRIGGER	2.5 V				SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					2.35 V	.65 mm	85 Cel			-40 Cel	3	TIN LEAD	DUAL	R-PDSO-G24	1	1.1 mm	4.4 mm	Not Qualified			2		NO	e0			7.8 mm		0 ns
MAX3388ECUG	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3 V	2	CMOS		EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	2.5 V		2.5		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		Line Driver or Receivers		2.35 V	.65 mm	70 Cel			0 Cel	3	TIN LEAD	DUAL	R-PDSO-G24	1	1.1 mm	4.4 mm	Not Qualified			2		NO	e0			7.8 mm		0 ns
MAX3389ECUG-T	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3 V	2			EIA-232; TIA-232; V.24; V.28		SCHMITT TRIGGER	2.5 V				SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					2.35 V	.65 mm	70 Cel			0 Cel	3	TIN LEAD	DUAL	R-PDSO-G24	1	1.1 mm	4.4 mm	Not Qualified			2		NO	e0			7.8 mm		0 ns
MAX3389ECUG	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3 V	2			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	2.5 V		2.5		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		Line Driver or Receivers		2.35 V	.65 mm	70 Cel			0 Cel	3	TIN LEAD	DUAL	R-PDSO-G24	1	1.1 mm	4.4 mm	Not Qualified	1.6 Amp		2		NO	e0			7.8 mm	7.4 V	0 ns
MAX3388EEUG	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3 V	2			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	2.5 V		2.5		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		Line Driver or Receivers		2.35 V	.65 mm	85 Cel			-40 Cel	3	TIN LEAD	DUAL	R-PDSO-G24	1	1.1 mm	4.4 mm	Not Qualified			2		NO	e0			7.8 mm		0 ns
MAX3389EEUG	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3 V	2			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	2.5 V		2.5		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		Line Driver or Receivers		2.35 V	.65 mm	85 Cel			-40 Cel	3	TIN LEAD	DUAL	R-PDSO-G24	1	1.1 mm	4.4 mm	Not Qualified	1.6 Amp		2		NO	e0			7.8 mm	7.4 V	0 ns
MAX3388ECUG-T	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3 V	2	CMOS		EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	2.5 V		2.5		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP24,.25		Line Driver or Receivers		2.35 V	.65 mm	70 Cel			0 Cel	3	TIN LEAD	DUAL	R-PDSO-G24	1	1.1 mm	4.4 mm	Not Qualified			2		NO	e0			7.8 mm		0 ns
MAX3389EEUG-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3 V	2			EIA-232; TIA-232; V.24; V.28		SCHMITT TRIGGER	2.5 V				SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					2.35 V	.65 mm	85 Cel			-40 Cel	3	TIN LEAD	DUAL	R-PDSO-G24	1	1.1 mm	4.4 mm	Not Qualified			2		NO	e0			7.8 mm		0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.