QCCJ Line Drivers & Receivers 127

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
HI-8281PJI	Holt Integrated Circuits	LINE TRANSCEIVER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	CMOS		ARINC 429		DIFFERENTIAL	5 V	12.6 V		-12 V	CHIP CARRIER		11.4 V			4.75 V	1.27 mm	85 Cel	12 V		-40 Cel	1	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-J44	3	4.57 mm	16.5862 mm	Not Qualified			2		YES	e0	30	225	16.5862 mm		0 ns
HI-8382J	Holt Integrated Circuits	LINE DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	CMOS	3000 ns	ARINC 429		DIFFERENTIAL	5 V	15 V	5,+-12/+-15		CHIP CARRIER	LDCC28,.5SQ	12 V	Line Driver or Receivers	.000001 Amp	4.75 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	1	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-J28	3	4.597 mm	11.5062 mm	Not Qualified		COMPLEMENTARY		ADJUSTABLE ARINC RISE AND FALL TIMES	YES	e0	30	225	11.5062 mm	9.5 V	0 ns
HI-8482J	Holt Integrated Circuits	LINE RECEIVER	INDUSTRIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	2	CMOS		ARINC 429		DIFFERENTIAL SCHMITT TRIGGER	5 V	13.2 V	5,+-12/+-15	-12 V	CHIP CARRIER	LDCC20,.4SQ	10.8 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	12 V		-40 Cel		Tin/Lead (Sn/Pb)	QUAD	S-PQCC-J20	1	4.597 mm	8.9662 mm	Not Qualified	2 Amp		2	ALSO OPERATES AT +/-15 V SUPPLY	NO	e0	30	225	8.9662 mm		0 ns
AM7968-125JC	Rochester Electronics	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	BIPOLAR		GENERAL PURPOSE		STANDARD	5 V				CHIP CARRIER					4.5 V	1.27 mm	70 Cel			0 Cel	1		QUAD	S-PQCC-J28		4.572 mm	11.5062 mm						YES		NOT SPECIFIED	NOT SPECIFIED	11.5062 mm
AM7969-125JC	Rochester Electronics	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	5 V				CHIP CARRIER					4.5 V	1.27 mm	70 Cel			0 Cel			QUAD	S-PQCC-J28		4.572 mm	11.5062 mm				1				NOT SPECIFIED	NOT SPECIFIED	11.5062 mm
MC10E116FNG	Onsemi	LINE RECEIVER	OTHER	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.7 V	5	ECL		GENERAL PURPOSE	35 mA	DIFFERENTIAL	5 V		-5.2	-5.2 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.2 V	1.27 mm	85 Cel			0 Cel		MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified			5	CAN ALSO OPERATE WITH -4.2V TO -5.7V SUPPLY IN NECL MODE	YES	e3	30	260	11.505 mm		.45 ns
MC10H116FN	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES		3	ECL		GENERAL PURPOSE	23 mA	DIFFERENTIAL			-5.2	-5.2 V	CHIP CARRIER	LDCC20,.4SQ		Line Driver or Receivers			1.27 mm	75 Cel			0 Cel		TIN LEAD	QUAD	S-PQCC-J20	3	4.57 mm	8.965 mm	Not Qualified			3		YES	e0		235	8.965 mm		1.3 ns
MC10H116FNG	Onsemi	LINE RECEIVER	COMMERCIAL EXTENDED	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES		3	ECL		GENERAL PURPOSE	23 mA	DIFFERENTIAL			-5.2	-5.2 V	CHIP CARRIER	LDCC20,.4SQ		Line Driver or Receivers			1.27 mm	75 Cel			0 Cel		MATTE TIN	QUAD	S-PQCC-J20	3	4.57 mm	8.965 mm	Not Qualified			3		YES	e3	30	260	8.965 mm		1.3 ns
DS3884V	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	6		7.5 ns	IEEE 1194.1		STANDARD	5 V				CHIP CARRIER					4.5 V		70 Cel			0 Cel	6		QUAD	S-PQCC-J44							6		NO						8 ns
UC5170CQTR	Texas Instruments	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	15 V	8	CMOS		EIA232-E; EIA423-A; V.10; V.28; X.26		STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.00004 Amp	9 V	1.27 mm	70 Cel		3-STATE	0 Cel	8	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified					NO	e4	30	260	11.505 mm	9 V	0 ns
UC5170CQ	Texas Instruments	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	15 V	8	CMOS		EIA232-E; EIA423-A; V.10; V.28; X.26		STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.00004 Amp	9 V	1.27 mm	70 Cel		3-STATE	0 Cel	8	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified					NO	e4	30	260	11.505 mm	9 V	0 ns
UC5181CQ	Texas Instruments	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	8	BIPOLAR		EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified	8 Amp		8		NO	e4	30	260	11.505 mm		120 ns
UC5181CQTR	Texas Instruments	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	8	BIPOLAR		EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			0 Cel			QUAD	S-PQCC-J28		4.57 mm	11.505 mm	Not Qualified	8 Amp		8		NO		NOT SPECIFIED	NOT SPECIFIED	11.505 mm		120 ns
UC5172QTR	Texas Instruments	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	15 V	8	BIPOLAR		EIA232-E; EIA423-A; V.10; V.28; X.26		STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.00004 Amp	9 V	1.27 mm	70 Cel		3-STATE	0 Cel	1		QUAD	S-PQCC-J28		4.57 mm	11.505 mm	Not Qualified					NO		NOT SPECIFIED	NOT SPECIFIED	11.505 mm	9 V	0 ns
UC5171QTR	Texas Instruments	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	15 V	8			EIA232-E; EIA423-A; V.10; V.28; X.26		STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.00004 Amp	9 V	1.27 mm	70 Cel		3-STATE	0 Cel	1		QUAD	S-PQCC-J28		4.57 mm	11.505 mm	Not Qualified					NO		NOT SPECIFIED	NOT SPECIFIED	11.505 mm	9 V	0 ns
DS3893AV	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES		1	BIPOLAR	7 ns	IEEE 896		SCHMITT TRIGGER					CHIP CARRIER						1.27 mm	70 Cel		OPEN-COLLECTOR	0 Cel	4	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-J20		4.57 mm	8.89 mm	Not Qualified		INVERTED	4		NO	e0			8.89 mm		8 ns
UC5180CQTR	Texas Instruments	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	8	BIPOLAR		EIA232-E; EIA422-A; EIA423-A; V.10; V.11; V.28; X.26; X.27	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified	8 Amp		8		NO	e4	30	260	11.505 mm		550 ns
UC5171Q	Texas Instruments	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	15 V	8	BIPOLAR		EIA232-E; EIA423-A; V.10; V.28; X.26		STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.00004 Amp	9 V	1.27 mm	70 Cel		3-STATE	0 Cel	1		QUAD	S-PQCC-J28		4.57 mm	11.505 mm	Not Qualified					NO		NOT SPECIFIED	NOT SPECIFIED	11.505 mm	9 V	0 ns
UC5180CQ	Texas Instruments	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	7 V	8	BIPOLAR		EIA232-E; EIA422-A; EIA423-A; V.10; V.11; V.28; X.26; X.27	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		3 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified	8 Amp		1		NO	e4	30	260	11.505 mm		550 ns
UC5172Q	Texas Instruments	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	15 V	8	BIPOLAR		EIA232-E; EIA423-A; V.10; V.28; X.26		STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.00004 Amp	9 V	1.27 mm	70 Cel		3-STATE	0 Cel	1	TIN LEAD	QUAD	S-PQCC-J28	2	4.57 mm	11.505 mm	Not Qualified					NO	e0			11.505 mm	9 V	0 ns
DS36954V	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	4		19 ns	EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				CHIP CARRIER					4.75 V	1.27 mm	70 Cel			0 Cel	4		QUAD	S-PQCC-J20		4.57 mm	8.89 mm				4		YES				8.89 mm		19 ns
DS36950VX	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR	19 ns	EIA-485	90 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC20,.4SQ		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	4	TIN LEAD	QUAD	S-PQCC-J20	2A	4.57 mm	8.89 mm	Not Qualified	4 Amp		4	COMMON I/O; 4 RECEIVERS ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVERS; INDIVIDUAL DRIVER ENABLES	YES	e0		250	8.89 mm	1.5 V	19 ns
SN75186FNR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR	5000 ns	EIA-232-E; TIA-232-E; V.28		SCHMITT TRIGGER	5 V	13.2 V	5,+-12	-12 V	CHIP CARRIER	LDCC28,.5SQ	10.8 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	70 Cel	12 V		0 Cel	4		QUAD	S-PQCC-J28		4.57 mm	11.505 mm	Not Qualified	4 Amp		4	LOOP BACK	NO		NOT SPECIFIED	NOT SPECIFIED	11.505 mm	14 V	6000 ns
DS36954VX	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR	19 ns	EIA-485	90 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC20,.4SQ		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	4	TIN LEAD	QUAD	S-PQCC-J20	2A	4.57 mm	8.89 mm	Not Qualified	4 Amp		4	COMMON I/O; 4 RECEIVERS ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVERS; INDIVIDUAL DRIVER ENABLES	YES	e0		250	8.89 mm	1.5 V	19 ns
SN75ALS053FNR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR	7 ns	IEEE 896.1	65 mA	STANDARD	5 V				CHIP CARRIER					4.75 V	1.27 mm	70 Cel		OPEN-COLLECTOR	0 Cel	4		QUAD	S-PQCC-J20		4.57 mm	8.9662 mm	Not Qualified		INVERTED	4		NO		NOT SPECIFIED	NOT SPECIFIED	8.9662 mm		8 ns
SN75ALS053FN	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR	7 ns	IEEE 896.1	65 mA	STANDARD	5 V				CHIP CARRIER					4.75 V	1.27 mm	70 Cel		OPEN-COLLECTOR	0 Cel	4		QUAD	S-PQCC-J20		4.57 mm	8.9662 mm	Not Qualified		INVERTED	4		NO		NOT SPECIFIED	NOT SPECIFIED	8.9662 mm		8 ns
SN75186FN	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR	5000 ns	EIA-232-E; TIA-232-E; V.28	.1 mA	SCHMITT TRIGGER	5 V	13.2 V	5,+-12	-12 V	CHIP CARRIER	LDCC28,.5SQ	10.8 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	4		QUAD	S-PQCC-J28		4.57 mm	11.505 mm	Not Qualified	4 Amp	INVERTED	4	LOOP BACK	NO		NOT SPECIFIED	NOT SPECIFIED	11.505 mm	14 V	6000 ns
SN75ALS053FN-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	4	TTL	7 ns	IEEE 896.1		SCHMITT TRIGGER	5 V				CHIP CARRIER					4.75 V	1.27 mm	70 Cel			0 Cel	1		QUAD	S-PQCC-J20		4.57 mm	8.9662 mm	Not Qualified			1		NO				8.9662 mm		8 ns
DS36954VX/NOPB	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES		4	BIPOLAR	19 ns	EIA-485	90 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC20,.4SQ		Line Driver or Receivers	.00002 Amp		1.27 mm	70 Cel			0 Cel	1	MATTE TIN	QUAD	S-PQCC-J20	2A	4.57 mm	8.89 mm	Not Qualified	4 Amp		1	COMMON I/O; 4 RECEIVERS ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVERS; INDIVIDUAL DRIVER ENABLES	YES	e3	30	250	8.89 mm	1.5 V	19 ns
DS36950	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES		4		19 ns	EIA-485		DIFFERENTIAL SCHMITT TRIGGER					CHIP CARRIER						1.27 mm	70 Cel			0 Cel	4		QUAD	S-PQCC-J20		4.57 mm	8.89 mm	Not Qualified			4		YES				8.89 mm		19 ns
SN75186FN-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR	5000 ns	EIA-232-C; EIA-232-D; V.28	.1 mA	STANDARD	5 V	13.2 V		-12 V	CHIP CARRIER		10.8 V			4.5 V	1.27 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	1		QUAD	S-PQCC-J28		4.57 mm	11.5062 mm	Not Qualified		INVERTED	1	LOOP BACK	NO				11.5062 mm		6000 ns
SN75LBC676FN	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	6	BICMOS	60 ns	X3.131; EIA-485; SCSI-2; ISO 8482	25 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	1		QUAD	S-PQCC-J28		4.57 mm	11.5062 mm	Not Qualified	8 Amp		1		YES		NOT SPECIFIED	NOT SPECIFIED	11.5062 mm	1 V	20 ns
DS36950VX/NOPB	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR	19 ns	EIA-485	90 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC20,.4SQ		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	4	MATTE TIN	QUAD	S-PQCC-J20	2A	4.57 mm	8.89 mm	Not Qualified	4 Amp		4	COMMON I/O; 4 RECEIVERS ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVERS; INDIVIDUAL DRIVER ENABLES	YES	e3	30	250	8.89 mm	1.5 V	19 ns
ADM5180JP	Analog Devices	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel		TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified	4 Amp	TRUE	8		NO	e0		225	11.505 mm		550 ns
ADM5170JP	Analog Devices	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1	CMOS	15 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.000001 Amp	9 V	1.27 mm	70 Cel		3-STATE	0 Cel	8	TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e0		225	11.505 mm	9 V	0 ns
ADM5170APZ	Analog Devices	LINE DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1	CMOS	15000 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.000001 Amp	9 V	1.27 mm	85 Cel		3-STATE	-40 Cel	8	MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e3		260	11.505 mm	9 V	0 ns
ADM5170AP-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1	CMOS	15 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.000001 Amp	9 V	1.27 mm	85 Cel		3-STATE	-40 Cel	8	TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e0		225	11.505 mm	9 V	0 ns
ADM5180APZ	Analog Devices	LINE RECEIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				CHIP CARRIER					4.75 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel		MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified		TRUE	8		NO	e3		260	11.505 mm		550 ns
ADM5180AP-REEL	Analog Devices	LINE RECEIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel		TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified	4 Amp	TRUE	8		NO	e0		225	11.505 mm		550 ns
ADM5180JPZ	Analog Devices	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				CHIP CARRIER					4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel		MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified		TRUE	8		NO	e3		260	11.505 mm		550 ns
ADM5170APZ-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1	CMOS	15000 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.000001 Amp	9 V	1.27 mm	85 Cel		3-STATE	-40 Cel	8	MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e3		260	11.505 mm	9 V	0 ns
ADM5180JP-REEL	Analog Devices	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel		TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified	4 Amp	TRUE	8		NO	e0		225	11.505 mm		550 ns
ADM5180JPZ-REEL	Analog Devices	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				CHIP CARRIER					4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel		MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified		TRUE	8			e3			11.505 mm		550 ns
ADM5180AP	Analog Devices	LINE RECEIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel		TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified	4 Amp	TRUE	8		NO	e0		225	11.505 mm		550 ns
ADM5170AP	Analog Devices	LINE DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1	CMOS	15 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.000001 Amp	9 V	1.27 mm	85 Cel		3-STATE	-40 Cel	8	TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e0		225	11.505 mm	9 V	0 ns
ADM5170JP-REEL	Analog Devices	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1	CMOS	15 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.000001 Amp	9 V	1.27 mm	70 Cel		3-STATE	0 Cel	8	TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e0		225	11.505 mm	9 V	0 ns
MAX248EQH+TD	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES			CMOS			30 mA		5 V		5		CHIP CARRIER	LDCC44,.7SQ		Line Driver or Receivers	.00005 Amp		1.27 mm	85 Cel			-40 Cel	8	Matte Tin (Sn) - annealed	QUAD	S-PQCC-J44				Not Qualified	3.2 Amp				NO	e3				10 V	1500 ns
MAX248CQH+TD	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES			CMOS			30 mA		5 V		5		CHIP CARRIER	LDCC44,.7SQ		Line Driver or Receivers	.00005 Amp		1.27 mm	70 Cel			0 Cel	8	Matte Tin (Sn) - annealed	QUAD	S-PQCC-J44	3			Not Qualified	3.2 Amp				NO	e3		245		10 V	1500 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.