QCCJ Line Drivers & Receivers 127

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
NE5170A	NXP Semiconductors	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	13 V	1	BIPOLAR		EIA-232-C; V.10; X.26; EIA-423-A	35 mA	STANDARD	12 V		-12 V	CHIP CARRIER				9 V	1.27 mm	70 Cel	3-STATE	0 Cel	8		QUAD	S-PQCC-J28		4.57 mm	11.5062 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO				11.5062 mm		0 ns
NE5181A	NXP Semiconductors	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR		EIA-232-C; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	100 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V			CHIP CARRIER				4.75 V	1.27 mm	70 Cel	TOTEM-POLE	0 Cel			QUAD	S-PQCC-J28		4.57 mm	11.5062 mm	Not Qualified		TRUE	8						11.5062 mm		100 ns
NE5180A-T	NXP Semiconductors	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR		EIA-232-C; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	100 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V			CHIP CARRIER				4.75 V	1.27 mm	70 Cel	TOTEM-POLE	0 Cel			QUAD	S-PQCC-J28		4.57 mm	11.5062 mm	Not Qualified		TRUE	8						11.5062 mm		500 ns
NE5180A	NXP Semiconductors	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR		EIA-232-C; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	100 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V			CHIP CARRIER				4.75 V	1.27 mm	70 Cel	TOTEM-POLE	0 Cel			QUAD	S-PQCC-J28		4.57 mm	11.5062 mm	Not Qualified		TRUE	8						11.5062 mm		500 ns
AM26LS30CA	NXP Semiconductors	LINE DRIVER	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	4	TTL	200 ns	EIA-422		STANDARD	5 V			CHIP CARRIER				4.75 V	1.27 mm	70 Cel		0 Cel	4		QUAD	S-PQCC-J20		4.57 mm	8.9662 mm	Not Qualified					YES				8.9662 mm
AM26LS30CA-T	NXP Semiconductors	LINE DRIVER	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	4	TTL	200 ns	EIA-422		STANDARD	5 V			CHIP CARRIER				4.75 V	1.27 mm	70 Cel		0 Cel	4		QUAD	S-PQCC-J20		4.57 mm	8.9662 mm	Not Qualified					YES				8.9662 mm
MAX248CQH	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	8	CMOS	3500 ns	EIA-232-E; TIA-232-E; V.28; V.24	30 mA	SCHMITT TRIGGER	5 V	5		CHIP CARRIER	LDCC44,.7SQ	Line Driver or Receivers	.00005 Amp	4.5 V	1.27 mm	70 Cel	3-STATE	0 Cel	8	TIN LEAD	QUAD	S-PQCC-J44	3	4.57 mm	16.585 mm	Not Qualified	3.2 Amp	INVERTED	8	8 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0			16.585 mm	10 V	1500 ns
MAX244EQH-TD	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES			CMOS			30 mA		5 V	5		CHIP CARRIER	LDCC44,.7SQ	Line Driver or Receivers			1.27 mm	85 Cel		-40 Cel	8		QUAD	S-PQCC-J44				Not Qualified	3.2 Amp				NO		NOT SPECIFIED	NOT SPECIFIED		10 V	10000 ns
MAX249CQH+	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	6		3500 ns	EIA-232-E; TIA-232-E; V.28; V.24	30 mA	SCHMITT TRIGGER	5 V	5		CHIP CARRIER	LDCC44,.7SQ	Line Driver or Receivers	.00005 Amp	4.5 V	1.27 mm	70 Cel		0 Cel	6	Matte Tin (Sn)	QUAD	S-PQCC-J44	3	4.57 mm	16.585 mm	Not Qualified	3.2 Amp		10	10 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3	30	260	16.585 mm	10 V	1500 ns
MAX244EQH+	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	8		3500 ns	EIA-232-E; TIA-232-E; V.28; V.24	30 mA	SCHMITT TRIGGER	5 V	5		CHIP CARRIER	LDCC44,.7SQ	Line Driver or Receivers	.00005 Amp	4.5 V	1.27 mm	85 Cel		-40 Cel	8	Matte Tin (Sn)	QUAD	S-PQCC-J44	3	4.57 mm	16.585 mm	Not Qualified	3.2 Amp		10	EXTERNAL CHARGE PUMP	NO	e3	30	260	16.585 mm	10 V	1500 ns
MAX244EQH-D	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES			CMOS			30 mA		5 V	5		CHIP CARRIER	LDCC44,.7SQ	Line Driver or Receivers			1.27 mm	85 Cel		-40 Cel	8	TIN LEAD	QUAD	S-PQCC-J44	1			Not Qualified	3.2 Amp				NO	e0				10 V	1500 ns
MAX244CQH	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	8	CMOS	3500 ns	EIA-232-E; TIA-232-E; V.28; V.24	30 mA	SCHMITT TRIGGER	5 V	5		CHIP CARRIER	LDCC44,.7SQ	Line Driver or Receivers	.00005 Amp	4.5 V	1.27 mm	70 Cel	TOTEM-POLE	0 Cel	8	TIN LEAD	QUAD	S-PQCC-J44	3	4.57 mm	16.585 mm	Not Qualified	3.2 Amp	INVERTED	10	EXTERNAL CHARGE PUMP	NO	e0	20	240	16.585 mm	10 V	1500 ns
MAX249CQH-TD	Maxim Integrated		COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES			CMOS			30 mA		5 V	5		CHIP CARRIER	LDCC44,.7SQ	Line Driver or Receivers	.00005 Amp		1.27 mm	70 Cel		0 Cel	6	TIN LEAD	QUAD	S-PQCC-J44	1			Not Qualified	3.2 Amp				NO	e0				10 V	1500 ns
MAX249EQH-TD	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES			CMOS			30 mA		5 V	5		CHIP CARRIER	LDCC44,.7SQ	Line Driver or Receivers	.00005 Amp		1.27 mm	85 Cel		-40 Cel	6	TIN LEAD	QUAD	S-PQCC-J44				Not Qualified	3.2 Amp				NO	e0				10 V	1500 ns
MAX244CQH-D	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES			CMOS			30 mA		5 V	5		CHIP CARRIER	LDCC44,.7SQ	Line Driver or Receivers	.00005 Amp		1.27 mm	70 Cel		0 Cel	8	TIN LEAD	QUAD	S-PQCC-J44	3			Not Qualified	3.2 Amp				NO	e0				10 V	1500 ns
MAX244EQH	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	8	CMOS	3500 ns	EIA-232-E; TIA-232-E; V.28; V.24	30 mA	SCHMITT TRIGGER	5 V	5		CHIP CARRIER	LDCC44,.7SQ	Line Driver or Receivers	.00005 Amp	4.5 V	1.27 mm	85 Cel	TOTEM-POLE	-40 Cel	8	TIN LEAD	QUAD	S-PQCC-J44	3	4.57 mm	16.585 mm	Not Qualified	3.2 Amp	INVERTED	10	EXTERNAL CHARGE PUMP	NO	e0		245	16.585 mm	10 V	1500 ns
MAX248EQH-D	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES			CMOS			30 mA		5 V	5		CHIP CARRIER	LDCC44,.7SQ	Line Driver or Receivers	.00005 Amp		1.27 mm	85 Cel		-40 Cel	8	TIN LEAD	QUAD	S-PQCC-J44	1			Not Qualified	3.2 Amp				NO	e0				10 V	1500 ns
MAX248CQH-TD	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES			CMOS			30 mA		5 V	5		CHIP CARRIER	LDCC44,.7SQ	Line Driver or Receivers	.00005 Amp		1.27 mm	70 Cel		0 Cel	8	TIN LEAD	QUAD	S-PQCC-J44	1			Not Qualified	3.2 Amp				NO	e0				10 V	1500 ns
MAX249EQH+	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	6		3500 ns	EIA-232-E; TIA-232-E; V.28; V.24	30 mA	SCHMITT TRIGGER	5 V	5		CHIP CARRIER	LDCC44,.7SQ	Line Driver or Receivers	.00005 Amp	4.5 V	1.27 mm	85 Cel		-40 Cel	6	Matte Tin (Sn)	QUAD	S-PQCC-J44	3	4.57 mm	16.585 mm	Not Qualified	3.2 Amp		10	10 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3	30	260	16.585 mm	10 V	1500 ns
MAX249EQH	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	6	CMOS	3500 ns	EIA-232-E; TIA-232-E; V.28; V.24	30 mA	SCHMITT TRIGGER	5 V	5		CHIP CARRIER	LDCC44,.7SQ	Line Driver or Receivers	.00005 Amp	4.5 V	1.27 mm	85 Cel	3-STATE	-40 Cel	6	TIN LEAD	QUAD	S-PQCC-J44	3	4.57 mm	16.585 mm	Not Qualified	3.2 Amp	INVERTED	10	10 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0	20	240	16.585 mm	10 V	1500 ns
MAX249EQH-D	Maxim Integrated		INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES			CMOS			30 mA		5 V	5		CHIP CARRIER	LDCC44,.7SQ	Line Driver or Receivers	.00005 Amp		1.27 mm	85 Cel		-40 Cel	6	TIN LEAD	QUAD	S-PQCC-J44	1			Not Qualified	3.2 Amp				NO	e0				10 V	1500 ns
MAX244CQH-TD	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES			CMOS			30 mA		5 V	5		CHIP CARRIER	LDCC44,.7SQ	Line Driver or Receivers	.00005 Amp		1.27 mm	70 Cel		0 Cel	8	TIN LEAD	QUAD	S-PQCC-J44	1			Not Qualified	3.2 Amp				NO	e0				10 V	1500 ns
MAX248CQH+	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	8		3500 ns	EIA-232-E; TIA-232-E; V.28; V.24	30 mA	SCHMITT TRIGGER	5 V	5		CHIP CARRIER	LDCC44,.7SQ	Line Driver or Receivers	.00005 Amp	4.5 V	1.27 mm	70 Cel		0 Cel	8	Matte Tin (Sn)	QUAD	S-PQCC-J44	3	4.57 mm	16.585 mm	Not Qualified	3.2 Amp		8	8 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3	30	260	16.585 mm	10 V	1500 ns
MAX248EQH+	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	8		3500 ns	EIA-232-E; TIA-232-E; V.28; V.24	30 mA	SCHMITT TRIGGER	5 V	5		CHIP CARRIER	LDCC44,.7SQ	Line Driver or Receivers	.00005 Amp	4.5 V	1.27 mm	85 Cel		-40 Cel	8	Matte Tin (Sn)	QUAD	S-PQCC-J44	3	4.57 mm	16.585 mm	Not Qualified	3.2 Amp		8	8 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3	30	260	16.585 mm	10 V	1500 ns
MAX248CQH-D	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES			CMOS			30 mA		5 V	5		CHIP CARRIER	LDCC44,.7SQ	Line Driver or Receivers	.00005 Amp		1.27 mm	70 Cel		0 Cel	8	TIN LEAD	QUAD	S-PQCC-J44	1			Not Qualified	3.2 Amp				NO	e0				10 V	1500 ns
MAX244CQH+	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	8		3500 ns	EIA-232-E; TIA-232-E; V.28; V.24	30 mA	SCHMITT TRIGGER	5 V	5		CHIP CARRIER	LDCC44,.7SQ	Line Driver or Receivers	.00005 Amp	4.5 V	1.27 mm	70 Cel		0 Cel	8	Matte Tin (Sn)	QUAD	S-PQCC-J44	3	4.57 mm	16.585 mm	Not Qualified	3.2 Amp		10	EXTERNAL CHARGE PUMP	NO	e3	30	260	16.585 mm	10 V	1500 ns
MAX249CQH-D	Maxim Integrated		COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES			CMOS			30 mA		5 V	5		CHIP CARRIER	LDCC44,.7SQ	Line Driver or Receivers	.00005 Amp		1.27 mm	70 Cel		0 Cel	6	TIN LEAD	QUAD	S-PQCC-J44	1			Not Qualified	3.2 Amp				NO	e0				10 V	1500 ns
MAX248EQH	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	8	CMOS	3500 ns	EIA-232-E; TIA-232-E; V.28; V.24	30 mA	SCHMITT TRIGGER	5 V	5		CHIP CARRIER	LDCC44,.7SQ	Line Driver or Receivers	.00005 Amp	4.5 V	1.27 mm	85 Cel	3-STATE	-40 Cel	8	TIN LEAD	QUAD	S-PQCC-J44	3	4.57 mm	16.585 mm	Not Qualified	3.2 Amp	INVERTED	8	8 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0		245	16.585 mm	10 V	1500 ns
MAX244EQH+TD	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES			CMOS			30 mA		5 V	5		CHIP CARRIER	LDCC44,.7SQ	Line Driver or Receivers	.00005 Amp		1.27 mm	85 Cel		-40 Cel	8	MATTE TIN	QUAD	S-PQCC-J44				Not Qualified	3.2 Amp				NO	e3				10 V	1500 ns
MAX248EQH-TD	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES			CMOS			30 mA		5 V	5		CHIP CARRIER	LDCC44,.7SQ	Line Driver or Receivers	.00005 Amp		1.27 mm	85 Cel		-40 Cel	8	TIN LEAD	QUAD	S-PQCC-J44	1			Not Qualified	3.2 Amp				NO	e0				10 V	1500 ns
MAX249CQH	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	6	CMOS	3500 ns	EIA-232-E; TIA-232-E; V.28; V.24	30 mA	SCHMITT TRIGGER	5 V	5		CHIP CARRIER	LDCC44,.7SQ	Line Driver or Receivers	.00005 Amp	4.5 V	1.27 mm	70 Cel	3-STATE	0 Cel	6	TIN LEAD	QUAD	S-PQCC-J44	3	4.57 mm	16.585 mm	Not Qualified	3.2 Amp	INVERTED	10	10 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e0			16.585 mm	10 V	1500 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.