RECTANGULAR Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
AM26C32QD	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BICMOS			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	6 Amp	TRUE	4		NO	e4	NOT SPECIFIED	260	9.9 mm		27 ns
DS90C032TM/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-644; TIA-644; IEEE 1596.3		DIFFERENTIAL	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	5 V		-40 Cel		MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	2 Amp		4		YES	e3	30	260	9.9 mm		6 ns
FIN1032MTCX	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4				EIA-644; TIA-644	15 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	8 Amp		4			e4	30	260	5 mm		2.5 ns
ISL8485EIPZ	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	BICMOS		50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.5 V	2.54 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDIP-T8		5.33 mm	7.62 mm				1		YES	e3			9.585 mm		150 ns
MAX14783EASA+	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		20 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					3 V		125 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1						1		YES	e3	30	260			25 ns
MAX232EIDWG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				EIA-232-F; TIA-232-F; V.28	10 mA	SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	5 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	3.2 Amp		2		NO	e4	NOT SPECIFIED	260	10.3 mm	10 V	0 ns
MAX3083EESD-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1			1000 ns	EIA-422; EIA-485	1 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		1		YES	e0			8.65 mm	2 V	200 ns
MAX3083EESD+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1			1000 ns	EIA-422; EIA-485	1 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		1		YES	e3	30	260	8.65 mm	2 V	200 ns
MAX3221EIPWE4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp	INVERTED	1	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	5 mm	10 V	150 ns
MAX3362AKA-T	Maxim Integrated	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	1	BICMOS		50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, LOW PROFILE, SHRINK PITCH					3.135 V	.65 mm	125 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.45 mm	1.625 mm	Not Qualified			1		YES	e0			2.9 mm		50 ns
MAX3362AKA#T	Maxim Integrated	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	1	BICMOS		50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSSOP8,.1		Line Driver or Receivers		3.135 V	.65 mm	125 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.45 mm	1.625 mm	Not Qualified	1 Amp		1		YES	e0	20	245	2.9 mm	1.5 V	50 ns
MAX483CSA-T	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS		2000 ns	EIA-422; EIA-485	.65 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.001 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	COMPLEMENTARY	1	1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER	YES	e0		245	4.9 mm	1.5 V	2000 ns
MAX483CSA+T	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS		2000 ns	EIA-422; EIA-485	.65 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.001 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	COMPLEMENTARY	1	COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER	YES	e3	30	260	4.9 mm	1.5 V	2000 ns
SN65HVD379DRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			18 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11	2.1 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	4.9 mm	1.5 V	45 ns
SN65LBC179D	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		18 ns	EIA-485; ISO 8482	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	85 Cel	5 V	TOTEM-POLE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4.9 mm	1.1 V	30 ns
SN75117P	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	BIPOLAR		30 ns	GENERAL PURPOSE	60 mA	DIFFERENTIAL	5 V	5.5 V	5		IN-LINE	DIP8,.3	4.5 V	Line Driver or Receivers	.00004 Amp	4.5 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	15 Amp	COMPLEMENTARY	1	1 RECEIVER ACTIVE UNDER SHUTDOWN; COMMON I/O; STROBED RECEIVER	YES	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	2 V	75 ns
SN75160BDWRE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	8	BIPOLAR		20 ns	IEEE-488	110 mA	SCHMITT TRIGGER	5 V	5.25 V			SMALL OUTLINE		4.75 V		.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V		0 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified	48000 Amp	TRUE	8		NO	e4	30	260	12.8 mm		22 ns
SN75ALS192DR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		14 ns	EIA-422-B; TIA-422-B; V.11	45 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	2 Amp	COMPLEMENTARY			YES	e4	30	260	9.9 mm	2 V	0 ns
SN75C1168PWR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11	9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	.65 mm	70 Cel	5 V	3-STATE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	6 Amp	COMPLEMENTARY	2	RECEIVER 3-STATE OUTPUTS	YES	e4	30	260	5 mm	2 V	27 ns
ST3237EBPR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3				EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel			-40 Cel	5	MATTE TIN	DUAL	R-PDSO-G28	3	2 mm	5.3 mm	Not Qualified	1 Amp		3	1 MEGA BITS PER SECOND DATA RATE POSSIBLE	NO	e3	30	260	10.2 mm	10 V	0 ns
ADM3065EARZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			15 ns	EIA-485; TIA-485	7.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE	SOP8,.24				3 V	1.27 mm	85 Cel		DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm			COMPLEMENTARY	1		YES	e3	30	260	4.9 mm		35 ns
ADM3311EARSZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS			EIA-232	35 mA	SCHMITT TRIGGER	3.3 V		3/3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		2.7 V	.65 mm	85 Cel			-40 Cel	3	MATTE TIN	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified	1.6 Amp		5		NO	e3		260	10.2 mm	10 V	1000 ns
DS34LV86TM	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-422-B; TIA-422-B; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	6 Amp		4			e0	20	235	9.9 mm		35 ns
HI-8570PSIF	Holt Integrated Circuits	LINE DRIVER	INDUSTRIAL	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.3 V	2	CMOS			ARINC 429		STANDARD	5 V		+-5	-5 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25		Line Driver or Receivers	.0000001 Amp	4.8 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn)	DUAL	R-PDSO-G8	1	1.626 mm	3.9 mm	Not Qualified					YES	e3	40	260	4.915 mm	9 V	0 ns
HIN202CBNZ-T	Renesas Electronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS		10000 ns	V.28; EIA-232-E		SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel			0 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	2	1.75 mm	3.9 mm				2		NO	e3	30	260	9.9 mm		10000 ns
ISL32172EFVZ	Renesas Electronics	LINE DRIVER	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BICMOS		15 ns	EIA-422		STANDARD	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.5 V	.65 mm	125 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	2	1.2 mm	4.4 mm					CAN ALSO OPERATE FROM VCC=3 TO 3.6V	YES	e3	30	260	5 mm
ISL32495EIBZ	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		350 ns	EIA-485; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	2	1.75 mm	3.9 mm				1		YES	e3	30	260	4.9 mm		150 ns
ISO35MDW	Texas Instruments	LINE TRANSCEIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			340 ns	EIA-422; TIA-422; EIA-485; TIA-485	19 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.4	3.15 V	Line Driver or Receivers	.00001 Amp	3.15 V	1.27 mm	125 Cel	3.3 V		-55 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified			1		YES	e4	30	260	10.3 mm	1.5 V	100 ns
LT1785AIS8#WPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR	AEC-Q100	2000 ns	EIA-422; EIA-485	9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE	SOP8,.25				4.75 V	1.27 mm	85 Cel		DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8		1.75 mm	3.9 mm		1.6 Amp		1		YES	e3			4.9 mm	1.2 V	900 ns
LT1785AIS8#WTRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR	AEC-Q100	2000 ns	EIA-422; EIA-485	9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE	SOP8,.25				4.75 V	1.27 mm	85 Cel		DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8		1.75 mm	3.9 mm		1.6 Amp		1		YES	e3			4.9 mm	1.2 V	900 ns
LTC1685CS8#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS		22 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.752 mm	3.899 mm	Not Qualified			1		YES	e3	30	260	4.905 mm		22 ns
MAX1480CEPI	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	CMOS		3000 ns	EIA-422; EIA-485	75 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP28,.6		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDIP-T28	1	5.08 mm	15.24 mm	Not Qualified	2 Amp		1	COMMON I/O; ISOLATED DATA INTERFACE	YES	e0		245	36.83 mm	1.5 V	3000 ns
MAX1480CEPI+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	CMOS		3000 ns	EIA-422; EIA-485	75 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP28,.6		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T28	1	5.08 mm	15.24 mm	Not Qualified			1	COMMON I/O; ISOLATED DATA INTERFACE	YES	e3			36.83 mm	1.5 V	3000 ns
MAX3243ECPWRE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3				EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	5.5 V	3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	4.5 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel	5 V		0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp		5	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	9.7 mm	5 V	150 ns
MAX3243ECPWRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3				EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	5.5 V	3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	4.5 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel	5 V		0 Cel	3	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp		5	ALSO OPERATES AT 5V SUPPLY	NO	e4	NOT SPECIFIED	260	9.7 mm	10 V	150 ns
MAX3490ESA/GG8	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			35 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE	SOP8,.25			.000002 Amp	3 V	1.27 mm	85 Cel		DIFFERENTIAL	-40 Cel	1		DUAL	R-PDSO-G8		1.75 mm	3.9 mm		2.5 Amp	COMPLEMENTARY	1		YES		NOT SPECIFIED	NOT SPECIFIED	4.9 mm	1.5 V	90 ns
SN75176APE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR		60 ns	V.11; EIA-422-B	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		IN-LINE	DIP8,.3	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	8 Amp	COMPLEMENTARY	1	TRISTATABLE RECEIVER; COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e4			9.81 mm	1.5 V	35 ns
SN75ALS192DRE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		14 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	9.9 mm	2 V	0 ns
SN75HVD1176DRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		10 ns	EIA-485-A; TIA-485-A	6 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	70 Cel	5 V	DIFFERENTIAL	0 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	.1 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4.9 mm	2.1 V	25 ns
SP233AET-L/TR	Exar	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS		3000 ns	EIA-232; TIA-232; V.28	15 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers	.0002 Amp	4.5 V	1.27 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G20	3	2.65 mm	7.5 mm	Not Qualified	3.2 Amp		2		NO	e3		260	12.8 mm	10 V	1000 ns
TRS3243EIPWRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3				EIA-232-F; TIA-232-F	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	.001 Amp	INVERTED	5		NO	e4	30	260	9.7 mm	10 V	0 ns
DS90C031BTMX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS		3.5 ns	EIA-644; TIA-644		STANDARD	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e3	30	260	9.9 mm	.25 V	0 ns
FIN1532MTCX	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-644; TIA-644	22 mA	DIFFERENTIAL	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		4.5 V	.65 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	8 Amp		4			e4	30	260	5 mm		3 ns
HIN211ECBZ	Renesas Electronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS		10000 ns	EIA-232; V.28		SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel			0 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	3	2.65 mm	7.5 mm				5		NO	e3	30	260	17.9 mm		10000 ns
LTC2803IGN-1#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS		2000 ns	EIA-232-F; TIA-232-F		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, SHRINK PITCH					1.8 V	.635 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.899 mm	Not Qualified			2		NO	e3	30	260	4.8895 mm		400 ns
LTC2862CS8-1#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	70 Cel			0 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.752 mm	3.899 mm				1		YES	e3	30	260	4.9025 mm		65 ns
MAX3222ECDBR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			300 ns	EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel	3.3 V		0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G20	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	2	ALSO OPERATES AT 5V SUPPLY	NO	e4	NOT SPECIFIED	260	7.2 mm	10 V	300 ns
MAX3232EEPE	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2	BICMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		IN-LINE	DIP16,.3		Line Driver or Receivers		3 V	2.54 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDIP-T16	1	4.572 mm	7.62 mm	Not Qualified	1.6 Amp		2		NO	e0			19.175 mm	10 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.