RECTANGULAR Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
TJA1082TT,112	NXP Semiconductors	LINE TRANSCEIVER		GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1				GENERAL PURPOSE		STANDARD	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.5 V	.65 mm					1		DUAL	R-PDSO-G14	1	1.1 mm	4.4 mm				1		NO		30	260	5 mm
TRSF3232ECDRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2				EIA-232	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	1.6 Amp		2		NO	e4	30	260	9.9 mm	10 V	0 ns
ADN4650BRSZ-RL7	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			4.5 ns	EIA-644-A; TIA-644-A	72 mA	DIFFERENTIAL	3.3 V				SMALL OUTLINE, SHRINK PITCH	SSOP20,.3				3 V	.65 mm	125 Cel		DIFFERENTIAL	-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G20	3	2 mm	5.3 mm				2		YES	e3	30	260	7.2 mm	.25 V	4.5 ns
AM26C32CDBR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BICMOS			V.10; V.11; EIA-422-B; EIA-423-B		DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V			SMALL OUTLINE, SHRINK PITCH		4.5 V			4.5 V	.65 mm	70 Cel	5 V		0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified			1		NO	e4	NOT SPECIFIED	260	6.2 mm		27 ns
AM26LS31CNE4	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BIPOLAR		20 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified					YES	e4			19.305 mm		0 ns
DS90LT012AHMF/NOPB	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-644-A; TIA-644-A	9 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	2.7 V	Line Driver or Receivers	.00002 Amp	2.7 V	.95 mm	125 Cel	3.3 V		-40 Cel		Matte Tin (Sn)	DUAL	R-PDSO-G5	1	1.22 mm	1.6 mm	Not Qualified	2 Amp	TRUE	1		NO	e3	NOT SPECIFIED	260	2.92 mm		3.5 ns
ICL3226EIAZ-T	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS			EIA-232; TIA-232; V.24; V.28		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	2	2 mm	5.3 mm				1		NO	e3	30	260	6.2 mm
ISL3281EIHZ-T	Renesas Electronics	LINE RECEIVER	INDUSTRIAL	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS			EIA-485; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, LOW PROFILE, SHRINK PITCH					3 V	.95 mm	85 Cel			-40 Cel		MATTE TIN	DUAL	R-PDSO-G6	2	1.45 mm	1.6 mm				1		NO	e3	30	260	2.9 mm		60 ns
LTM2894IY#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	BALL	24	BGA	RECTANGULAR	PLASTIC/EPOXY	YES	36 V	1			300 ns	GENERAL PURPOSE	9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				GRID ARRAY	BGA24,21X6,39			.000001 Amp	4.4 V	1 mm	85 Cel		DIFFERENTIAL	-40 Cel	1		BOTTOM	R-PBGA-B24	3	2.31 mm	6.25 mm			COMPLEMENTARY	1		YES		30	260	22 mm	2.5 V	300 ns
MAX13082EESA-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		1800 ns	EIA-422; EIA-485	1.8 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified	1 Amp		1		YES	e0			4.9 mm	2 V	200 ns
MAX13082EESA+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		1800 ns	EIA-422; EIA-485	1.8 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	1 Amp		1		YES	e3	30	260	4.9 mm	2 V	200 ns
MAX13085EESA-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		1000 ns	EIA-422; EIA-485	1.8 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	1 Amp		1		YES	e0	20	240	4.9 mm	2 V	200 ns
MAX13085EESA+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		1000 ns	EIA-422; EIA-485	1.8 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	1 Amp		1		YES	e3	30	260	4.9 mm	2 V	200 ns
MAX203CWP+G36	Maxim Integrated	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2				EIA-232-E; TIA-232-E; V.28	15 mA	SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel	2	MATTE TIN	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified		INVERTED	2		NO	e3	20	225	12.8 mm		10000 ns
MAX3180EUK-T	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS			EIA-232; V.24; V.28	.005 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37		Line Driver or Receivers		3 V	.95 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G5	1	1.45 mm	1.625 mm	Not Qualified	1.6 Amp		1			e0			2.9 mm		0 ns
MAX3180EUK+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				EIA-232; V.24; V.28		SCHMITT TRIGGER	5 V				SMALL OUTLINE, LOW PROFILE, SHRINK PITCH					3 V	.95 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	DUAL	R-PDSO-G5	1	1.45 mm	1.625 mm	Not Qualified			1			e3	30	260	2.9 mm
MAX3243IPW	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS		150 ns	EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp	INVERTED	5	CAN ALSO OPERATE WITH 5V SUPPLY	NO	e4	30	260	9.7 mm	5 V	150 ns
MAX489CSD	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS		2000 ns	EIA-422; EIA-485	.25 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.000001 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	1	TIN LEAD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	COMPLEMENTARY	1	1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER	YES	e0			8.65 mm	1.5 V	2000 ns
MAX489CSD+	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS		2000 ns	EIA-422; EIA-485	.25 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.000001 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	COMPLEMENTARY	1	1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER	YES	e3	30	260	8.65 mm	1.5 V	2000 ns
MC3486NSR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	85 mA	DIFFERENTIAL	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.3	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	70 Cel	5 V		0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	8 Amp		4		NO	e4	30	260	10.2 mm		35 ns
SN65HVD179DR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			12 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11	2.7 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4.9 mm	1.7 V	40 ns
SN65HVD53DRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		12 ns	EIA-485-A; TIA-485-A	2.7 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP14,.25	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	1	SIGNALING RATE 25 MBPS	YES	e4	NOT SPECIFIED	260	8.65 mm	1.7 V	40 ns
SN65LBC179QD	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		18 ns	EIA-485; ISO 8482	7 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	125 Cel	5 V	TOTEM-POLE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	.1 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4.9 mm	1.1 V	30 ns
SN65LBC184DG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR		1300 ns	EIA-485; TIA-485; ISO 8482	25 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	85 Cel	5 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	.1 Amp	COMPLEMENTARY	1		YES	e4	30	260	4.9 mm	1.5 V	300 ns
SN65LVDS349PWR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644-A; TIA-644-A	20 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	TSSOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	4 Amp	TRUE	4		YES	e4	30	260	5 mm		6 ns
SN75116NSRE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BIPOLAR		30 ns	GENERAL PURPOSE	60 mA	DIFFERENTIAL	5 V		5		SMALL OUTLINE	SOP16,.3		Line Driver or Receivers	.00004 Amp	4.5 V	1.27 mm	70 Cel			0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	15 Amp		1	1 RECEIVER ACTIVE UNDER SHUTDOWN; CONFIGURABLE TOTEM-POLE OUTPUTS; DIFFERENTIAL OUTPUT PAIRS	YES	e4	30	260	10.2 mm	2 V	75 ns
SN75172DWRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		65 ns	V.11; EIA-422-B; EIA-485	60 mA	STANDARD	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.8 mm	1.5 V	0 ns
SNJ55116J	Texas Instruments	LINE TRANSCEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	1	BIPOLAR	MIL-PRF-38535	30 ns	GENERAL PURPOSE	60 mA	DIFFERENTIAL	5 V	5.5 V	5		IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers	.00004 Amp	4.5 V	2.54 mm	125 Cel	5 V		-55 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified	.04 Amp	COMPLEMENTARY	1	1 RECEIVER ACTIVE UNDER SHUTDOWN; CONFIGURABLE TOTEM-POLE OUTPUTS; DIFFERENTIAL OUTPUT PAIRS	YES	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm	1.8 V	75 ns
SP233ACT-L/TR	Exar	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS		3000 ns	EIA-232; TIA-232; V.28	15 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers	.0002 Amp	4.5 V	1.27 mm	70 Cel			0 Cel	2	MATTE TIN	DUAL	R-PDSO-G20	3	2.65 mm	7.5 mm	Not Qualified	3.2 Amp		2		NO	e3		260	12.8 mm	10 V	1000 ns
THS6062IDG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	16 V	2				GENERAL PURPOSE		DIFFERENTIAL	15 V			-15 V	SMALL OUTLINE					2.5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			2	ALSO OPERATES AT 5V TO 32V SINGLE SUPPLY	NO	e4	30	260	4.9 mm		0 ns
TRS3223EIPWRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2				EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp		2	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	6.5 mm	10 V	0 ns
ADM4851ARZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1			600 ns	EIA-422; EIA-485	.5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		1		YES	e3	30	260	4.9 mm	1.5 V	1000 ns
ADM4856ARZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1			180 ns	EIA-422; EIA-485	.5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		1		YES	e3	30	260	4.9 mm	1.5 V	190 ns
AM26LV32INSR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS			EIA-422-B; TIA-422-B; V.11	17 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.3	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	5 Amp	TRUE	4		NO	e4	30	260	10.2 mm		20 ns
DS8921MX/NOPB	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BIPOLAR		15 ns	EIA-422	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers	.00002 Amp	4.5 V	1.27 mm	70 Cel	5 V		0 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		1		YES	e3	30	260	4.9 mm	2.5 V	22.5 ns
DS90LV012ATMF	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-644-A; TIA-644-A	9 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37	3 V	Line Driver or Receivers		2.7 V	.953 mm	85 Cel	3.3 V		-40 Cel		Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G5	1	1.22 mm	1.6 mm	Not Qualified	2 Amp	TRUE	1		NO	e0	NOT SPECIFIED	260	2.92 mm		3.5 ns
DS90LV012ATMFX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-644-A; TIA-644-A	9 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37		Line Driver or Receivers		2.7 V	.95 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G5	1	1.45 mm	1.6 mm	Not Qualified	2 Amp		1			e0		260	2.92 mm		3.5 ns
HI-8570CRM	Holt Integrated Circuits	LINE DRIVER	MILITARY	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	5.3 V	2	CMOS			ARINC 429		STANDARD	5 V		+-5	-5 V	IN-LINE	DIP8,.3		Line Driver or Receivers	.0000001 Amp	4.8 V	2.54 mm	125 Cel			-55 Cel	1	TIN LEAD	DUAL	R-CDIP-T8		5.08 mm	6.29 mm	Not Qualified					YES	e0			9.652 mm	9 V	0 ns
IL3185E	Nve	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			65 ns	EIA-485	7 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V	3.3/5,5		SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.0008 Amp	3 V	1.25 mm	85 Cel	5 V		-40 Cel	1		DUAL	R-PDSO-G16	1	2.67 mm	7.455 mm	Not Qualified	4 Amp		1		YES				10.3 mm	1.5 V	85 ns
ISL4489EIBZ-T	Renesas Electronics	LINE TRANSCEIVER		GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		2000 ns	EIA-422; EIA-485	.46 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE	SOP14,.25			.00013 Amp	4.5 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	3	1.75 mm	3.9 mm		-4 Amp		1		YES	e3	30	260	8.65 mm	2 V	2000 ns
LTC1518IS#PBF	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	CMOS			EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	85 Cel			-40 Cel		MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified			4			e3	30	260	9.9 mm		25 ns
LTC2863HS8-1#TRPBF	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	125 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.752 mm	3.899 mm				1		YES	e3	30	260	4.9025 mm		65 ns
LTC2871IUHF#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	38	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS		70 ns	EIA-232; EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.7 V	.5 mm	85 Cel	3.3 V		-40 Cel	3	Matte Tin (Sn) - annealed	QUAD	R-PQCC-N38	1	.8 mm	5 mm	Not Qualified			3		YES	e3	30	260	7 mm		200 ns
MAX202EEWE	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS			EIA-232-E; TIA-232-E; V.28	15 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers	.0002 Amp	4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	3.2 Amp	INVERTED	2	EXTERNAL CHARGE PUMP	NO	e0	20	240	10.3 mm	10 V	10000 ns
MAX202EEWE+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS			EIA-232-E; TIA-232-E; V.28	15 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers	.0002 Amp	4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	3.2 Amp	INVERTED	2	EXTERNAL CHARGE PUMP	NO	e3	30	260	10.3 mm	10 V	10000 ns
MAX202IPWRE4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				EIA-232-F; TIA-232-F; V.28	15 mA	SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	.65 mm	85 Cel	5 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	.01 Amp	INVERTED	2		NO	e4	NOT SPECIFIED	260	5 mm	10 V	10000 ns
MAX202IPWRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				EIA-232-F; TIA-232-F; V.28	15 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers	.0002 Amp	4.5 V	.65 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp		2		NO	e4	30	260	5 mm	10 V	10000 ns
MAX3077EESA-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	BICMOS		50 ns	EIA-422; EIA-485; TIA-485	1.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		2.97 V	1.27 mm	85 Cel			-40 Cel	1	Tin/Lead (Sn85Pb15)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	1 Amp		1		YES	e0	20	245	4.9 mm	1.5 V	75 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.