SQUARE Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
LTC2854CDD	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	10	HVSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1				50 ns	EIA-485-A; TIA-485-A		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	70 Cel			0 Cel	1	Tin/Lead (Sn/Pb)	DUAL	S-PDSO-N10	1	.8 mm	3 mm	Not Qualified			1		YES	e0			3 mm		70 ns
LTC2854HDD#TR	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	10	HVSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1				50 ns	EIA-485-A; TIA-485-A		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	125 Cel			-40 Cel	1	TIN LEAD	DUAL	S-PDSO-N10	1	.8 mm	3 mm	Not Qualified			1		YES	e0			3 mm		70 ns
MAX9947ETE+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	1		BICMOS		5000 ns	EIA-485	20 mA	SCHMITT TRIGGER	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20				3 V	.5 mm	105 Cel		OPEN-DRAIN	-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N16	1	.8 mm	3 mm		3.3 Amp	TRUE	1		NO	e3	30	260	3 mm		11000 ns
SN65LVDS101DGKRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		BIPOLAR		.9 ns	EIA-644-A; TIA-644-A	61 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers		3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified		COMPLEMENTARY	1		YES	e4	30	260	3 mm		.9 ns
THVD1551DGK	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1				16 ns	EIA-485-A; TIA-485-A	1 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		4.5 V			4.5 V	.65 mm	125 Cel	5 V		-40 Cel	1	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	DUAL	S-PDSO-G8	1	1.1 mm	3 mm				1		YES	e4	NOT SPECIFIED	NOT SPECIFIED	3 mm		45 ns
TUSB522PIRGER	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	2	2				GENERAL PURPOSE	98 mA	DIFFERENTIAL	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.5 mm	85 Cel	3.3 V		-40 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-XQCC-N24	2	1 mm	4 mm				2		YES	e4	30	260	4 mm
TUSB522PRGET	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	2	2				GENERAL PURPOSE	98 mA	DIFFERENTIAL	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.5 mm	70 Cel	3.3 V		0 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-XQCC-N24	2	1 mm	4 mm				2		YES	e4	30	260	4 mm
TUSB551RWBR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	12	VQCCN	SQUARE	PLASTIC/EPOXY	YES	1.98 V	1	1					82 mA	DIFFERENTIAL	1.8 V	1.98 V			CHIP CARRIER, VERY THIN PROFILE		1.62 V			1.62 V	.4 mm	85 Cel	1.8 V		-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N12	2	.4 mm	1.6 mm				1		YES	e4	30	260	1.6 mm
AD2420WCCPZ01	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	1.98 V	2		DMOS	AEC-Q100		I2C	13 mA	DIFFERENTIAL	1.9 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20			.00001 Amp	1.7 V	.5 mm	105 Cel		OPEN-DRAIN	-40 Cel	2		QUAD	S-XQCC-N32		.8 mm	5 mm		1 Amp	COMPLEMENTARY	2		YES				5 mm	.21 V
ADM3062EACPZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	10	HVSON	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1				800 ns	EIA-485; TIA-485	7.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20				3 V	.5 mm	85 Cel		DIFFERENTIAL	-40 Cel	1		DUAL	S-PDSO-N10	3	.85 mm	3 mm			COMPLEMENTARY	1		YES		30	260	3 mm		200 ns
ADM3062EBRMZ	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1				800 ns	EIA-485; TIA-485	7.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP10,.20,20				3 V	.5 mm	125 Cel		DIFFERENTIAL	-40 Cel	1		DUAL	S-PDSO-G10	1	1.1 mm	3 mm			COMPLEMENTARY	1		YES		30	260	3 mm		200 ns
ADM489ABRMZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS		2000 ns	EIA-485-A; TIA-485-A; EIA-422; ISO 8482E	.074 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20		Line Driver or Receivers		4.5 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G10	1	1.1 mm	3 mm	Not Qualified	4 Amp		1		YES	e3	30	260	3 mm	1.5 V	2000 ns
ADM489ABRMZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS		2000 ns	EIA-485-A; TIA-485-A; EIA-422; ISO 8482E	.074 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20		Line Driver or Receivers		4.5 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G10	1	1.1 mm	3 mm	Not Qualified	4 Amp		1		YES	e3	30	260	3 mm	1.5 V	2000 ns
DS90C387VJDX	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	9		CMOS			EIA-644; TIA-644	210 mA	STANDARD	3.3 V		3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ		Line Driver or Receivers		3 V	.5 mm	70 Cel			-10 Cel	9	TIN LEAD	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified					YES	e0		260	14 mm		0 ns
DS90UB934TRGZRQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	2			AEC-Q100		ISO 10605		DIFFERENTIAL	1.8 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N48	3	1 mm	7 mm				2		NO	e4	30	260	7 mm
DS90UR241QVS/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			105 mA		3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers			.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	7 mm	2 V	0 ns
HI-8281PJI	Holt Integrated Circuits	LINE TRANSCEIVER	INDUSTRIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1		CMOS			ARINC 429		DIFFERENTIAL	5 V	12.6 V		-12 V	CHIP CARRIER		11.4 V			4.75 V	1.27 mm	85 Cel	12 V		-40 Cel	1	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-J44	3	4.57 mm	16.5862 mm	Not Qualified			2		YES	e0	30	225	16.5862 mm		0 ns
LMH0302SQ	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3.135 V	.65 mm	85 Cel			-40 Cel	1		QUAD	S-XQCC-N16		.8 mm	4 mm	Not Qualified					YES				4 mm
LTC2850IDD#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		50 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-N8	1	.8 mm	3 mm	Not Qualified			1		YES	e3	30	260	3 mm		70 ns
MAX13235EETP+T	Analog Devices		INDUSTRIAL	NO LEAD	20	QCCN	SQUARE	PLASTIC/EPOXY	YES				BICMOS				1 mA				3.3/5		CHIP CARRIER	LCC20,.20SQ,25		Line Driver or Receivers			.635 mm	85 Cel			-40 Cel	2	Matte Tin (Sn) - annealed	QUAD	S-PQCC-N20	1			Not Qualified	.8 Amp				NO	e3	30	260		10 V	0 ns
MAX9259GCB/V+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	64	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	1.9 V	1		CMOS			ISO 10605		STANDARD	1.8 V				FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH					1.7 V	.5 mm	105 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified			1		YES	e3	30	260	10 mm
MAX96706GTJ+	Analog Devices	LINE RECEIVER		NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	1.9 V	1			AEC-Q100		ISO 10605		DIFFERENTIAL	1.8 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20				1.7 V	.5 mm	115 Cel		OPEN-DRAIN	-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N32	1	.8 mm	5 mm		2 Amp		1		NO	e3	30	260	5 mm
SN65LV1224BRHBR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1					GENERAL PURPOSE	95 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32	2	1 mm	5 mm	Not Qualified		TRUE	1		NO	e4	30	260	5 mm	2 V	0 ns
SN65LV1224BRHBRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1					GENERAL PURPOSE	95 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32	2	1 mm	5 mm	Not Qualified		TRUE	1		NO	e4	30	260	5 mm	2 V	0 ns
SN65LV1224BRHBT	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1					GENERAL PURPOSE	95 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32	2	1 mm	5 mm	Not Qualified		TRUE	1		NO	e4	30	260	5 mm	2 V	0 ns
SN65LV1224BRHBTG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1				10 ns	GENERAL PURPOSE	95 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32	2	1 mm	5 mm	Not Qualified		COMPLEMENTARY	1		NO	e4	30	260	5 mm		0 ns
SN74AVCA406EZQSR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	24	VFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1				7.7 ns	GENERAL PURPOSE	.02 mA	STANDARD	1.8 V	3.6 V	1.2/3.6		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA24,5X5,20	1.2 V	Other Interface ICs		1.2 V	.5 mm	85 Cel	1.8 V	3-STATE	-40 Cel	1	TIN SILVER COPPER	BOTTOM	S-PBGA-B24	1	1 mm	3 mm	Not Qualified	.08 Amp	TRUE	1		NO	e1	30	260	3 mm		7.7 ns
SN74AVCA406LGQSR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	24	VFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		6 ns	GENERAL PURPOSE		STANDARD	1.8 V		3.3		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA24,5X5,20		Other Interface ICs		1.2 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	BOTTOM	S-PBGA-B24	1	1 mm	3 mm	Not Qualified			1		NO	e0		240	3 mm		6 ns
TUSB1002ARGET	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2	2			.15 ns		100 mA	DIFFERENTIAL	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.5 mm	70 Cel	3.3 V		0 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24	1	1 mm	4 mm				2		YES	e4	30	260	4 mm		.15 ns
USB1T1103MPX	Onsemi	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	14	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	1		CMOS		18 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	5 V		1.8/3.3,3.3,5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC14,.1SQ,20		Line Driver or Receivers		4 V	.5 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-XQCC-N14	1	.8 mm	2.5 mm	Not Qualified	2 Amp		1		YES	e4	30	260	2.5 mm	2.5 V	15 ns
5962-89681012A	Texas Instruments	LINE TRANSCEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.25 V	8			MIL-STD-883	16 ns	GENERAL PURPOSE	90 mA	SCHMITT TRIGGER	5 V	5.25 V			CHIP CARRIER		4.75 V		.00002 Amp	4.75 V		125 Cel	5 V	DIFFERENTIAL	-55 Cel	8	TIN LEAD	QUAD	S-CQCC-N20				Qualified		COMPLEMENTARY	8		NO	e0					18 ns
AD2426BCPZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	1.98 V	2		DMOS			I2C	13 mA	DIFFERENTIAL	1.9 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20			.00001 Amp	1.7 V	.5 mm	85 Cel		OPEN-DRAIN	-40 Cel	2		QUAD	S-XQCC-N32		.8 mm	5 mm		1 Amp	COMPLEMENTARY	2		YES			260	5 mm	.21 V
AD2426KCPZ	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	1.98 V	2		DMOS			I2C	13 mA	DIFFERENTIAL	1.9 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20			.00001 Amp	1.7 V	.5 mm	70 Cel		OPEN-DRAIN	0 Cel	2		QUAD	S-XQCC-N32		.8 mm	5 mm		1 Amp	COMPLEMENTARY	2		YES			260	5 mm	.21 V
AD2429WCCPZ01	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	1.98 V	2		DMOS	AEC-Q100		I2C	13 mA	DIFFERENTIAL	1.9 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20			.00001 Amp	1.7 V	.5 mm	105 Cel		OPEN-DRAIN	-40 Cel	2		QUAD	S-XQCC-N32		.8 mm	5 mm		1 Amp	COMPLEMENTARY	2		YES				5 mm	.21 V
ADA4930-1YCPZ-R7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES		1		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE						.5 mm	105 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	3	1 mm	3 mm	Not Qualified					YES	e3	30	260	3 mm		0 ns
ADM3065ETRMZ-EP-R7	Analog Devices	LINE TRANSCEIVER	MILITARY	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		DMOS		15 ns	EIA-485; TIA-485	172 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19				3 V	.65 mm	125 Cel		DIFFERENTIAL	-55 Cel	1		DUAL	S-PDSO-G8	1	1.1 mm	3 mm			COMPLEMENTARY	1		YES		30	260	3 mm		35 ns
ADM3311EACPZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3		CMOS			EIA-232	35 mA	SCHMITT TRIGGER	3.3 V		3/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers		2.7 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N32	3	1 mm	5 mm	Not Qualified	1.6 Amp		5		NO	e3	40	260	5 mm	10 V	1000 ns
ADM3311EACPZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3		CMOS			EIA-232	35 mA	SCHMITT TRIGGER	3.3 V		3/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers		2.7 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N32	3	1 mm	5 mm	Not Qualified	1.6 Amp		5		NO	e3			5 mm	10 V	1000 ns
ADM4850ARMZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1				2500 ns	EIA-422; EIA-485	.16 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.000001 Amp	4.75 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified	4 Amp		1		YES	e3	30	260	3 mm	1.5 V	1000 ns
AM26LS31MFKB	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	HQCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-STD-883 Class B	30 ns	EIA-422-B; TIA-422-B; V.11	80 mA	STANDARD	5 V	5.5 V	5		CHIP CARRIER, HEAT SINK/SLUG	LCC20,.35SQ	4.5 V	Line Driver or Receivers	.00002 Amp	4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	4	TIN LEAD	QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	20 Amp				YES	e0			8.89 mm	2 V	0 ns
DS100BR210SQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		2	2					63 mA			2.625 V	2.5,3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	2.375 V	Line Driver or Receivers	.00001 Amp		.5 mm	85 Cel	2.5 V		-40 Cel	2	MATTE TIN	QUAD	S-PQCC-N24	3	.8 mm	4 mm	Not Qualified					YES	e3	30	260	4 mm		0 ns
DS125DF1610FBE/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	196	BGA	SQUARE	PLASTIC/EPOXY	YES	2.625 V	4	16				GENERAL PURPOSE		DIFFERENTIAL	2.5 V	2.625 V			GRID ARRAY		2.375 V			2.375 V	1 mm	85 Cel	2.5 V		-40 Cel	4	TIN SILVER COPPER	BOTTOM	S-PBGA-B196	4	2.94 mm	15.05 mm				4		YES	e1	30	245	15.05 mm
DS90CF386SLC/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	BALL	64	LFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644	135 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		GRID ARRAY, LOW PROFILE, FINE PITCH	BGA64,8X8,32	3 V	Line Driver or Receivers		3 V	.8 mm	70 Cel	3.3 V		-10 Cel		TIN SILVER COPPER	BOTTOM	S-PBGA-B64	4	1.5 mm	8 mm	Not Qualified			4			e1	30	260	8 mm		0 ns
DS90UB914ATRHSTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	2			AEC-Q100		ISO 10605		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm				2		YES	e3	30	260	7 mm		0 ns
DS90UB926QSQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	60	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			145 mA		3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC60,.35SQ,20	3 V	Line Driver or Receivers			.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N60	3	.8 mm	9 mm	Not Qualified			1		NO	e3	30	260	9 mm		0 ns
DS90UB935TRHBRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1			AEC-Q100		ISO 10605		STANDARD	1.8 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N32	3	1 mm	5 mm						YES	e4	30	260	5 mm
DS90UB935TRHBTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	32	VQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100						1.89 V			CHIP CARRIER, VERY THIN PROFILE		1.71 V				.5 mm	105 Cel	1.8 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N32	3	1 mm	5 mm						YES	e4	30	260	5 mm
DS90UB949ATRGCTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.155 V	3			AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER	1.1 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.045 V	.5 mm	105 Cel	1.8 V		-40 Cel	3	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm	9 mm					ALSO HAS SUPPLY VOLTAGE RANGING FROM 1.71 TO 1.89 V	YES	e4	30	260	9 mm

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.