SQUARE Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
ISL83080EIUZ	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS		1300 ns	EIA-485; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.5 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G10	2	1.1 mm	3 mm				1		YES	e3	30	260	3 mm		150 ns
BU7988KVT	ROHM	LINE DRIVER	OTHER	GULL WING	100	QFP	SQUARE	PLASTIC/EPOXY	YES										3.3 V		3.3		FLATPACK	TQFP100,.63SQ		Line Driver or Receivers			.5 mm	85 Cel			-20 Cel		TIN COPPER	QUAD	S-PQFP-G100				Not Qualified						e2		260			0 ns
CY7C68000A-56LFXC	Cypress Semiconductor	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	56	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1					GENERAL PURPOSE		STANDARD	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	70 Cel			0 Cel	1	Matte Tin (Sn)	QUAD	S-XQCC-N56	3	1 mm	8 mm	Not Qualified			1			e3	20	260	8 mm		0 ns
DS90LT012ATLDX	National Semiconductor	LINE RECEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	3.6 V	1		CMOS			EIA-644-A; TIA-644-A	9 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.11,20		Line Driver or Receivers		2.7 V	.5 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	S-XDSO-N8	1	.8 mm	3 mm	Not Qualified	2 Amp		1			e0		235	3 mm		3.5 ns
HIN240IN	Intersil	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	44	QFP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		CMOS			V.28; EIA-232-E	15 mA	SCHMITT TRIGGER	5 V		5		FLATPACK	QFP44,.5SQ,32		Line Driver or Receivers		4.5 V	.8 mm	85 Cel			-40 Cel	5	TIN LEAD	QUAD	S-PQFP-G44		2.45 mm	10 mm	Not Qualified	1.6 Amp		5		NO	e0			10 mm	10 V	0 ns
ISL3153EIUZ	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1				400 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.5 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G10	2	1.1 mm	3 mm				1		YES	e3	30	260	3 mm		150 ns
ISL4238EIR	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.5 V	3		CMOS		1100 ns	EIA-232; TIA-232; V.24; V.28	.3 mA	SCHMITT TRIGGER	3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20				2.7 V	.5 mm	85 Cel		3-STATE	-40 Cel	5		QUAD	S-PQCC-N32		1 mm	5 mm			TRUE	3		NO				5 mm	10 V	550 ns
ISL4245EIRZ	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.5 V	3		CMOS		800 ns	EIA-232; TIA-232; V.24; V.28	.3 mA	SCHMITT TRIGGER	3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20				2.7 V	.5 mm	85 Cel		3-STATE	-40 Cel	3	MATTE TIN	QUAD	S-PQCC-N32	3	1 mm	5 mm			TRUE	5		NO	e3	30	260	5 mm	10 V	550 ns
SII160CT100	Lattice Semiconductor		COMMERCIAL	GULL WING	100	QFP	SQUARE	PLASTIC/EPOXY	YES								110 mA		3.3 V		3.3		FLATPACK	TQFP100,.63SQ		Line Driver or Receivers			.5 mm	70 Cel			0 Cel			QUAD	S-PQFP-G100				Not Qualified
SII164CT64	Lattice Semiconductor		COMMERCIAL	GULL WING	64	QFP	SQUARE	PLASTIC/EPOXY	YES								120 mA		3.3 V		3.3		FLATPACK	TQFP64,.47SQ		Line Driver or Receivers			.5 mm	70 Cel			0 Cel			QUAD	S-PQFP-G64				Not Qualified
ADA4930-2YCPZ-R7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES		2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE						.5 mm	105 Cel			-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N24	3	.9 mm	4 mm	Not Qualified					YES	e3	30	260	4 mm		0 ns
ADA4938-2ACPZ-RL	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	11 V	2					GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N24	3	1 mm	4 mm	Not Qualified					YES	e3		260	4 mm		0 ns
DS90UB913QSQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			80 mA			1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N32	3	.8 mm	5 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	5 mm		0 ns
DS90UB941ASRTDTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	4			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL	1.8 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel	4	NICKEL PALLADIUM GOLD SILVER	QUAD	S-PQCC-N64	3	.9 mm	9 mm						YES	e4	30	260	9 mm
DS90UB948TNKDTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	2			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.5 mm	105 Cel	3.3 V		-40 Cel		Matte Tin (Sn)	QUAD	S-XQCC-N64	3	.8 mm	9 mm				2		NO	e3	30	260	9 mm
DS96F174ME/883	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-STD-883	25 ns	EIA-485; EIA-422	50 mA		5 V	5.5 V	5		CHIP CARRIER	LCC20,.35SQ	4.5 V	Line Driver or Receivers	.00002 Amp	4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	4		QUAD	S-CQCC-N20	1	1.91 mm	8.89 mm	Not Qualified	60 Amp	TRUE			YES				8.89 mm	1.5 V	0 ns
LTC2856IDD-2#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1				1500 ns	EIA-485-A; TIA-485-A		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	S-PDSO-N8	1	.8 mm	3 mm	Not Qualified			1		YES	e3	30	260	3 mm		70 ns
5962-9163901M2A	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		CMOS	38535Q/M;38534H;883B	14 ns	EIA-422	3.2 mA	STANDARD	4 V	5.5 V	5		CHIP CARRIER	LCC20,.35SQ	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	4	TIN LEAD	QUAD	S-CQCC-N20		1.905 mm	8.89 mm	Qualified	20000 Amp				YES	e0			8.89 mm	2 V	0 ns
ADA4927-2YCPZ-R7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	11 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL					CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	105 Cel			-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N24	3	1 mm	4 mm	Not Qualified					YES	e3		260	4 mm		0 ns
ADA4939-2YCPZ-R7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	5.25 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	105 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N24	3	1 mm	4 mm	Not Qualified					YES	e3		260	4 mm		0 ns
ADM3061EARMZ-R7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1				800 ns	EIA-485; TIA-485	7.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP8,.2,25				3 V	.65 mm	85 Cel		DIFFERENTIAL	-40 Cel	1		DUAL	S-PDSO-G8	1	1.1 mm	3 mm			COMPLEMENTARY	1		YES		30	260	3 mm		200 ns
ADM3066EARMZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1				15 ns	EIA-485; TIA-485	7.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSOP10,.20,20				3 V	.5 mm	85 Cel		DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G10	1	1.1 mm	3 mm			COMPLEMENTARY	1		YES	e3	30	260	3 mm		35 ns
ADM3066EBCPZ-R7	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	10	HVSON	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1				15 ns	EIA-485; TIA-485	7.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC10,.12,20				3 V	.5 mm	125 Cel		DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	S-PDSO-N10	3	.85 mm	3 mm			COMPLEMENTARY	1		YES	e3	30	260	3 mm		35 ns
ADM3310EACPZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3		CMOS			EIA-232	35 mA	SCHMITT TRIGGER	3.3 V		3/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers		2.7 V	.5 mm	85 Cel			-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N32	3	1 mm	5 mm	Not Qualified	1.6 Amp		5		NO	e3	30	260	5 mm	10 V	1000 ns
ADM4853ACPZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1				30 ns	EIA-422; EIA-485	.5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,20		Line Driver or Receivers		4.75 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-N8	3	.9 mm	3 mm	Not Qualified	4 Amp		1		YES	e3		260	3 mm	1.5 V	190 ns
ADV7612BSWZ	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	100	HLFQFP	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1		CMOS			I2C		STANDARD	1.8 V	3.46 V			FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH		3.14 V			1.71 V	.5 mm	85 Cel	3.3 V		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G100	3	1.6 mm	14 mm	Not Qualified			1		NO	e3	30	260	14 mm		300 ns
ADV7623BSTZ-RL	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	144	LFQFP	SQUARE	PLASTIC/EPOXY	YES	1.89 V	3		CMOS			GENERAL PURPOSE	545 mA	DIFFERENTIAL	1.8 V	3.46 V			FLATPACK, LOW PROFILE, FINE PITCH	QFP144,.87SQ,20	3.14 V		.00006 Amp	1.71 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	3	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G144	3	1.6 mm	20 mm			COMPLEMENTARY	12		YES	e3	30	260	20 mm	2 V
AFE7769IABJ	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	400	FBGA	SQUARE	PLASTIC/EPOXY	YES		4					GENERAL PURPOSE		STANDARD					GRID ARRAY, FINE PITCH						.8 mm	85 Cel			-40 Cel	4	TIN SILVER COPPER	BOTTOM	S-PBGA-B400	3	2.65 mm	17 mm				4	RF frequency(Min)(MHz) is 600; RF frequency(Max)(MHz) is 6000	NO	e1	30	260	17 mm
AM7968-125JC	Rochester Electronics	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		BIPOLAR			GENERAL PURPOSE		STANDARD	5 V				CHIP CARRIER					4.5 V	1.27 mm	70 Cel			0 Cel	1		QUAD	S-PQCC-J28		4.572 mm	11.5062 mm						YES		NOT SPECIFIED	NOT SPECIFIED	11.5062 mm
AM7969-125JC	Rochester Electronics	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	5 V				CHIP CARRIER					4.5 V	1.27 mm	70 Cel			0 Cel			QUAD	S-PQCC-J28		4.572 mm	11.5062 mm				1				NOT SPECIFIED	NOT SPECIFIED	11.5062 mm
DS125DF111SQE	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2	2				GENERAL PURPOSE	333 mA	DIFFERENTIAL	3.3 V	2.625 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	2.375 V			3 V	.5 mm	85 Cel	2.5 V	DIFFERENTIAL	-40 Cel	2	MATTE TIN	QUAD	S-PQCC-N24	3	.8 mm	4 mm		3 Amp	COMPLEMENTARY	2	ALSO OPERATE 3.3 VOLT SUPPLY	YES	e3	30	260	4 mm
DS25BR440TSQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4						190 mA		3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm	6 mm	Not Qualified		COMPLEMENTARY	4		YES	e3	30	260	6 mm		0 ns
DS25MB100TSQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1								3.3 V	3.465 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC36,.25SQ,20	3.15 V	Line Driver or Receivers	.00001 Amp	3.135 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel		MATTE TIN	QUAD	S-XQCC-N36	3			Not Qualified		COMPLEMENTARY	1		YES	e3	30	260			0 ns
DS50EV401SQE/NOPB	Texas Instruments	LINE TRANSCEIVER		NO LEAD		HVQCCN	SQUARE	PLASTIC/EPOXY	YES														CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE												MATTE TIN	QUAD	S-PQCC-N48	3									e3	30	260			0 ns
DS90LV004TVS	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.45 V	4		CMOS		3.2 ns	GENERAL PURPOSE	140 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.45 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3.15 V	Line Driver or Receivers	.00001 Amp	3.15 V	.5 mm	85 Cel			-40 Cel	4	TIN LEAD	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		TRUE	4		YES	e0		260	7 mm	.25 V	3.2 ns
DS90UB914ATRHSRQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	2			AEC-Q100		ISO 10605		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm				2		YES	e3	30	260	7 mm		0 ns
DS90UB921TRHSRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100		GENERAL PURPOSE		STANDARD	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.5 mm	105 Cel	3.3 V		-40 Cel	1	Matte Tin (Sn)	QUAD	S-PQCC-N48	3	.8 mm	7 mm						YES	e3	30	260	7 mm
DS90UB925QSQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100		ISO 10605	170 mA	STANDARD	3.3 V	3.6 V	1.8/3.3,3.3		CHIP CARRIER	LCC48,.27SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	7 mm		0 ns
DS90UB927QSQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD		HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			160 mA			3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V				.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm	6 mm			COMPLEMENTARY			YES	e3	30	260	6 mm		0 ns
DS90UB927QSQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD		HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			160 mA			3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V				.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm	6 mm			COMPLEMENTARY			YES	e3	30	260	6 mm		0 ns
DS90UB933TRTVRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1			AEC-Q100		ISO 10605		STANDARD	1.8 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N32	3	.8 mm	5 mm						YES	e3	30	260	5 mm
DS90UB936TRGZTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	2			AEC-Q100		ISO 10605		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N48	3	1 mm	7 mm				2	ALSO HAS SUPPLY VOLTAGE RANGING FROM 1.045 TO 1.155	NO	e4	30	260	7 mm
DS90UB940NTNKDRQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	1.26 V	2			AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER	1.2 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.14 V	.5 mm	105 Cel	3.3 V		-40 Cel		Matte Tin (Sn)	QUAD	S-XQCC-N64	3	.8 mm	9 mm				2	ALSO HAS SUPPLY VOLTAGE RANGING FROM 3 TO 3.6 V	NO	e3	30	260	9 mm
DS90UB962WRTDTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	4			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		NICKEL PALLADIUM GOLD SILVER	QUAD	S-PQCC-N64	3	.9 mm	9 mm				4	ALSO HAS SUPPLY VOLTAGE RANGING FROM 1.045 TO 1.155V	NO	e4	30	260	9 mm
DS90UH925ATRHSTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100		ISO 10605		STANDARD	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.5 mm	105 Cel	3.3 V		-40 Cel	1	Matte Tin (Sn)	QUAD	S-PQCC-N48	3	.8 mm	7 mm						YES	e3	NOT SPECIFIED	260	7 mm
DS90UH929TRGCRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			330 mA			1.89 V	1.1,1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm	9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	9 mm	1.197 V
DS90UH947NTRGCRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.155 V	2			AEC-Q100			469 mA		1.1 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.35SQ,20				1.045 V	.5 mm	105 Cel		DIFFERENTIAL	-40 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm	9 mm			COMPLEMENTARY			YES	e4	30	260	9 mm	.9 V
DS92LV090ATVEH/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	9		CMOS		2.2 ns	GENERAL PURPOSE	210 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	9	MATTE TIN	QUAD	S-PQFP-G64	3	1.6 mm	10 mm	Not Qualified	2 Amp	TRUE	9		YES	e3	30	260	10 mm	.24 V	3.2 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.