SQUARE Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
DS92LV3241TVSX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES		4				10 ns		200 mA		3.3 V	3.465 V	1.8/3.3,3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3.135 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	MATTE TIN	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	10 mm	2.4 V	0 ns
SN55183FK	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR		16 ns	GENERAL PURPOSE	36 mA	GATED	5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers	.00012 Amp	4.5 V	1.27 mm	125 Cel		TOTEM-POLE	-55 Cel	2		QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified		COMPLEMENTARY			YES		NOT SPECIFIED	NOT SPECIFIED	8.89 mm	1.3 V	0 ns
DS92LV2412SQX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1					GENERAL PURPOSE	85 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V	1.8,3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC60,.35SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	9 mm	Not Qualified			1		NO	e3	30	260	9 mm		0 ns
DS92LX2122SQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1					I2C	96 mA	DIFFERENTIAL	1.8 V	1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified		COMPLEMENTARY	21		NO	e3	30	260	7 mm		0 ns
TSB41AB1PHP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS			IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3/3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V		0 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			2		YES	e4	30	260	7 mm	.172 V	0 ns
SN55LBC174FK	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.25 V	2		BICMOS		40 ns	EIA-485	7 mA	STANDARD	5 V				CHIP CARRIER					4.75 V	1.27 mm	125 Cel		3-STATE	-55 Cel	2		QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified		COMPLEMENTARY			YES				8.89 mm
DRV601RTJT	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	4.5 V	2	2				GENERAL PURPOSE	.001 mA	STANDARD	3.3 V	4.5 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	1.8 V	Line Driver or Receivers	.000001 Amp	1.8 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N20	2	.8 mm	4 mm	Not Qualified		TRUE			NO	e4	30	260	4 mm	6.15 V	0 ns
TSB41LV06APZPG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	100	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	12					IEEE 1394		DIFFERENTIAL	3.3 V	3.6 V			FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH		3 V			3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	12	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified		COMPLEMENTARY	12		YES	e4	30	260	14 mm		0 ns
TSB21LV03CMHVB	Texas Instruments	LINE TRANSCEIVER	MILITARY	FLAT	68	QFF	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	3.6 V	3		CMOS	38535Q/M;38534H;883B		IEEE 1394	175 mA	DIFFERENTIAL SCHMITT TRIGGER	3 V		3/3.3		FLATPACK	QFL68,.5SQ,25		Line Driver or Receivers		2.7 V	.635 mm	125 Cel			-55 Cel	6		QUAD	S-CQFP-F68		3.86 mm	12.51 mm	Not Qualified	12 Amp		6		YES		NOT SPECIFIED	NOT SPECIFIED	12.51 mm	.17 V	0 ns
DS99R103TSQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1		CMOS			GENERAL PURPOSE	95 mA	STANDARD	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N48	2	.8 mm	7 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	7 mm		0 ns
DS08MB200TSQX	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	2		CMOS		2.5 ns	GENERAL PURPOSE	275 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20		Other Interface ICs		3 V	.5 mm	85 Cel			-40 Cel	2		QUAD	S-XQCC-N48		.8 mm	7 mm	Not Qualified			2		YES		NOT SPECIFIED	NOT SPECIFIED	7 mm		2.5 ns
TDES954RGZR	Texas Instruments	LINE RECEIVER	OTHER	NO LEAD	48	HQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1						279 mA	DIFFERENTIAL	1.8 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20			.00019 Amp	1.71 V	.5 mm	85 Cel		OPEN-DRAIN	-20 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N48	3	1 mm	7 mm		.035 Amp	INVERTED	1		YES	e4	30	260	7 mm
SN55116FK	Texas Instruments	LINE TRANSCEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	1		BIPOLAR		30 ns	GENERAL PURPOSE	60 mA	DIFFERENTIAL	5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers	.00004 Amp	4.5 V	1.27 mm	125 Cel			-55 Cel	2		QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	15 Amp	COMPLEMENTARY	1	1 RECEIVER ACTIVE UNDER SHUTDOWN; CONFIGURABLE TOTEM-POLE OUTPUTS; DIFFERENTIAL OUTPUT PAIRS	YES		NOT SPECIFIED	NOT SPECIFIED	8.89 mm	1.8 V	75 ns
THS7102CGQE	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	BALL	80	VFBGA	SQUARE	PLASTIC/EPOXY	YES	15.75 V	1					GENERAL PURPOSE		DIFFERENTIAL	15 V				GRID ARRAY, VERY THIN PROFILE, FINE PITCH					14.25 V	.5 mm	70 Cel			0 Cel	1		BOTTOM	S-PBGA-B80		1 mm	5 mm	Not Qualified			1		YES				5 mm		0 ns
DS3884AVF	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	44	QFP	SQUARE	PLASTIC/EPOXY	YES		6				5 ns	IEEE 1194.1		STANDARD					FLATPACK						.8 mm	70 Cel			0 Cel	6	Tin/Lead (Sn/Pb)	QUAD	S-PQFP-G44		2.1 mm	10 mm	Not Qualified			6		NO	e0			10 mm		6 ns
DS92LV0411SQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	36	VQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	4					GENERAL PURPOSE	90 mA	STANDARD	1.8 V	3.6 V	1.8,3.3		CHIP CARRIER, VERY THIN PROFILE	LCC36,.25SQ,20	3 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	6 mm		0 ns
TSB41LV02A	Texas Instruments		COMMERCIAL	GULL WING	64	QFP	SQUARE	PLASTIC/EPOXY	YES				CMOS						3.3 V		3.3		FLATPACK	TQFP64,.47SQ		Line Driver or Receivers	.000005 Amp		.5 mm	70 Cel			0 Cel	4		QUAD	S-PQFP-G64				Not Qualified	4 Amp				YES					.172 V	11 ns
SNJ55111FK	Texas Instruments		MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES				BIPOLAR	38535Q/M;38534H;883B	15 ns				5 V		+-5	-5 V	CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers	.00004 Amp		1.27 mm	125 Cel		CONSTANT-CURRENT	-55 Cel	4		QUAD	S-XQCC-N20				Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED			0 ns
DS92LX1621SQX/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1					I2C	90 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V	3-STATE	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N32	3	.8 mm	5 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	5 mm		0 ns
LM2506SQX	Texas Instruments	LINE TRANSCEIVER	OTHER	NO LEAD	40	HVQCCN	SQUARE	UNSPECIFIED	YES	2 V	1					GENERAL PURPOSE		STANDARD	1.8 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					1.74 V	.4 mm	85 Cel			-30 Cel		TIN	QUAD	S-XQCC-N40	3	.8 mm	5 mm	Not Qualified					NO	e3			5 mm
DS92LV0411SQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	36	VQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	4					GENERAL PURPOSE	90 mA	STANDARD	1.8 V	3.6 V	1.8,3.3		CHIP CARRIER, VERY THIN PROFILE	LCC36,.25SQ,20	3 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	6 mm		0 ns
SN55LVDS32FK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	3.6 V	4		CMOS			EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V		3.3		CHIP CARRIER	LCC28,.5SQ		Line Driver or Receivers		3 V	1.27 mm	125 Cel			-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	8 Amp		4		NO				8.89 mm		6.1 ns
TLIN1021DRBRQ1	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	8	HSON	SQUARE	PLASTIC/EPOXY	YES	36 V	1	1		AEC-Q100		ISO 17987-4.2		SCHMITT TRIGGER	12 V	36 V			SMALL OUTLINE, HEAT SINK/SLUG		4.5 V			4.5 V		125 Cel	12 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N8	2						1		NO	e4	30	260			6000 ns
TSB41AB3PFPG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6		CMOS			IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6		YES	e4	30	260	12 mm	.172 V	0 ns
LM2512ASNX/NOPB	Texas Instruments	LINE DRIVER	OTHER	NO LEAD	40	QCCN	SQUARE	PLASTIC/EPOXY	YES								9 mA				1.8,1.8/3		CHIP CARRIER	LCC40,.24SQ,20		Line Driver or Receivers			.5 mm	85 Cel			-30 Cel		MATTE TIN	QUAD	S-PQCC-N40	3			Not Qualified						e3	30	260			0 ns
THS7103CVFP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	32	HLQFP	SQUARE	PLASTIC/EPOXY	YES	16 V	1					GENERAL PURPOSE		DIFFERENTIAL	15 V				FLATPACK, HEAT SINK/SLUG, LOW PROFILE					7.5 V	.8 mm	70 Cel			0 Cel	1		QUAD	S-PQFP-G32		1.6 mm	7 mm	Not Qualified			1		YES				7 mm		0 ns
SNJ55LBC176FK	Texas Instruments	LINE TRANSCEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.25 V	1		BICMOS	MIL-PRF-38535	31 ns	EIA-485-A; TIA-485-A; ISO 8482	5.4 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		CHIP CARRIER	LCC20,.35SQ	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	125 Cel	5 V		-55 Cel	1	Tin/Lead (Sn/Pb)	QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	8 Amp		1	COMMON I/O: TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e0	NOT SPECIFIED	NOT SPECIFIED	8.89 mm	1.1 V	37 ns
LM2502SQX	Texas Instruments	LINE TRANSCEIVER	OTHER	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.3 V	1					GENERAL PURPOSE		SCHMITT TRIGGER	3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					2.9 V	.4 mm	85 Cel			-30 Cel	1	TIN	QUAD	S-PQCC-N40	3	.8 mm	5 mm	Not Qualified			1		NO	e3			5 mm
DS99R104TSQ	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1		CMOS			GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N48	2	.8 mm	7 mm	Not Qualified			1		YES	e0			7 mm
SCAN50C400AUT	Texas Instruments	LINE TRANSCEIVER		BALL	440	BGA	SQUARE	PLASTIC/EPOXY	YES	3.465 V	4					EIA-644-A; TIA-644-A		DIFFERENTIAL	3.3 V				GRID ARRAY					3.135 V	1 mm					4		BOTTOM	S-PBGA-B440	3	2.49 mm	23 mm	Not Qualified			4		YES			220	23 mm		0 ns
PDS90UB941ASRTDTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	4			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL	1.8 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					1.71 V	.5 mm	105 Cel			-40 Cel	4		QUAD	S-PQCC-N64		.9 mm	9 mm						YES				9 mm
DS32ELX0421	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	2					GENERAL PURPOSE		DIFFERENTIAL	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	2		QUAD	S-XQCC-N48		.8 mm	7 mm	Not Qualified					YES				7 mm
SCAN921025SLC/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	BALL	49	LFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			IEEE 1149.1	105 mA	STANDARD	3.3 V	3.6 V	3.3		GRID ARRAY, LOW PROFILE, FINE PITCH	BGA49,7X7,32	3 V	Line Driver or Receivers		3 V	.8 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	TIN SILVER COPPER	BOTTOM	S-PBGA-B49	4	1.5 mm	7 mm	Not Qualified		COMPLEMENTARY			YES	e1	30	260	7 mm	2.2 V	0 ns
LMH6555SQX	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.63 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					2.97 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N16	2	.8 mm	4 mm						YES	e0	30	235	4 mm
DS125BR111SQE/NOPB	Texas Instruments		INDUSTRIAL	NO LEAD	24	QCCN	SQUARE	PLASTIC/EPOXY	YES												2.5/3.3		CHIP CARRIER	LCC24,.16SQ,20		Line Driver or Receivers			.5 mm	85 Cel			-40 Cel		MATTE TIN	QUAD	S-PQCC-N24	3			Not Qualified						e3	30	260
DS92LV090ATVEHX/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	9		CMOS		2.2 ns	GENERAL PURPOSE	210 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	9	MATTE TIN	QUAD	S-PQFP-G64	3	1.6 mm	10 mm	Not Qualified	2 Amp	TRUE	9		YES	e3	30	260	10 mm	.24 V	3.2 ns
DS92LV090ATVEP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	9		CMOS		2.2 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				FLATPACK, LOW PROFILE, FINE PITCH					3 V	.5 mm	85 Cel			-40 Cel	9	TIN LEAD	QUAD	S-PQFP-G64		1.6 mm	10 mm	Not Qualified			9		YES	e0			10 mm		3.2 ns
SNJ55154FK	Texas Instruments		MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES				BIPOLAR	38535Q/M;38534H;883B			40 mA				5/12		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers			1.27 mm	125 Cel			-55 Cel			QUAD	S-XQCC-N20				Not Qualified	16 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
TSB81BA3EPFP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES		3		CMOS				150 mA			3.6 V	1.8,3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers			.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6		YES	e4	30	260	12 mm	.172 V	0 ns
SNJ55109AFK	Texas Instruments		MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES				BIPOLAR	38535Q/M;38534H;883B	15 ns				5 V		+-5	-5 V	CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers	.00004 Amp		1.27 mm	125 Cel		CONSTANT-CURRENT	-55 Cel	2		QUAD	S-XQCC-N20				Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED			0 ns
DS99R421ISQ	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	105 Cel			-40 Cel		TIN LEAD	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified			3		YES	e0			6 mm
DS92LV2422SQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	60	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1					I2C	11.5 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC60,.35SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V		-40 Cel		MATTE TIN	QUAD	S-XQCC-N60	3	.8 mm	9 mm	Not Qualified			24		NO	e3	30	260	9 mm		0 ns
DS92LV1260TUJB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	BALL	196	LBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	7		CMOS			GENERAL PURPOSE	530 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		GRID ARRAY, LOW PROFILE	BGA196,14X14,40		Line Driver or Receivers		3 V	1 mm	85 Cel			-40 Cel		TIN LEAD	BOTTOM	S-PBGA-B196	3	1.47 mm	15 mm	Not Qualified			7			e0	20	220	15 mm		0 ns
SCAN16602SM	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	64	LFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	16				5.5 ns	IEEE 1149.1		STANDARD	3 V				GRID ARRAY, LOW PROFILE, FINE PITCH					2.7 V	.8 mm	85 Cel			-40 Cel	16	Tin/Lead (Sn63Pb37)	BOTTOM	S-PBGA-B64	3	1.5 mm	8 mm	Not Qualified			16		NO	e0	30	235	8 mm		5.5 ns
SCAN921226HSMX	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	BALL	49	LFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			IEEE 1149.1	120 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		GRID ARRAY, LOW PROFILE, FINE PITCH	BGA49,7X7,32		Line Driver or Receivers		3 V	.8 mm	125 Cel			-40 Cel		TIN LEAD	BOTTOM	S-PBGA-B49	3	1.5 mm	7 mm	Not Qualified			1			e0	20	235	7 mm		0 ns
100314FMQB	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	24	QFF	SQUARE	CERAMIC, GLASS-SEALED	YES		4							DIFFERENTIAL					FLATPACK						1.27 mm	125 Cel			-55 Cel			QUAD	S-GQFP-F24		2.159 mm	9.398 mm				4		YES				9.398 mm		2.7 ns
DS99R124QSQE/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			80 mA		1.8 V	1.89 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V		-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm	Not Qualified					NO	e3	30	260	7 mm		0 ns
DS92LV2422SQ/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	60	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1					I2C	11.5 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC60,.35SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-XQCC-N60	3	.8 mm	9 mm	Not Qualified		TRUE	24		NO	e3	30	260	9 mm		0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.