SQUARE Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
LM2506SQ/NOPB	Texas Instruments	LINE TRANSCEIVER	OTHER	NO LEAD	40	HVQCCN	SQUARE	UNSPECIFIED	YES	2 V	1					GENERAL PURPOSE		STANDARD	1.8 V		1.8,1.8/3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.2SQ,16		Line Driver or Receivers		1.74 V	.4 mm	85 Cel			-30 Cel	1	MATTE TIN	QUAD	S-XQCC-N40	3	.8 mm	5 mm	Not Qualified			1		NO	e3	30	260	5 mm		0 ns
SCAN92LV090SLC	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	64	LFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	9		CMOS		2.6 ns	IEEE 1149.1	210 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		GRID ARRAY, LOW PROFILE, FINE PITCH	BGA64,8X8,32	3 V	Line Driver or Receivers	.00002 Amp	3 V	.8 mm	85 Cel	3.3 V	3-STATE	-40 Cel	9	TIN LEAD	BOTTOM	S-PBGA-B64	3	1.5 mm	8 mm	Not Qualified	2 Amp	COMPLEMENTARY	9		YES	e0	20	235	8 mm		3.9 ns
DS92LV2421SQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1					I2C	90 mA	STANDARD	1.8 V	1.89 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V		-40 Cel	24	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified					YES	e3	30	260	7 mm		0 ns
SNJ55LVDS31FK	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	HQCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	3.6 V	4		CMOS	MIL-PRF-38535	4.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG	LCC20,.35SQ	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	125 Cel	3.3 V	3-STATE	-55 Cel	4	TIN LEAD	QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified		TRUE			YES	e0			8.89 mm	.247 V	0 ns
UC5172QTR	Texas Instruments	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	15 V	8		BIPOLAR			EIA232-E; EIA423-A; V.10; V.28; X.26		STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.00004 Amp	9 V	1.27 mm	70 Cel		3-STATE	0 Cel	1		QUAD	S-PQCC-J28		4.57 mm	11.505 mm	Not Qualified					NO		NOT SPECIFIED	NOT SPECIFIED	11.505 mm	9 V	0 ns
DS99R421ISQ/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3			AEC-Q100		ISO 10605	130 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC36,.25SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified		TRUE	3		NO	e3	30	260	6 mm		0 ns
TSB14C01APMR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	5.25 V	2		CMOS			IEEE 1394		STANDARD	5 V		5		FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20		Line Driver or Receivers		4.5 V	.5 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G64	3	1.6 mm	10 mm	Not Qualified	24 Amp		2		NO	e4	30	260	10 mm		0 ns
TSB41LV02APAPR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4				11 ns	IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			0 Cel	4		QUAD	S-PQFP-G64		1.2 mm	10 mm	Not Qualified			4		YES				10 mm		0 ns
SCAN92LV090VEH	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	64	QFP	SQUARE	PLASTIC/EPOXY	YES				CMOS				210 mA		3.3 V		3.3		FLATPACK	QFP64,.47SQ,20		Line Driver or Receivers	.00002 Amp		.5 mm	85 Cel			-40 Cel	9		QUAD	S-PQFP-G64				Not Qualified	2 Amp				YES		NOT SPECIFIED	NOT SPECIFIED			0 ns
SNJ55189AFK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-PRF-38535		EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V	5.5 V	5		CHIP CARRIER	LCC20,.35SQ	4.5 V	Line Driver or Receivers	.0083 Amp	4.5 V	1.27 mm	125 Cel	5 V	TOTEM-POLE	-55 Cel		Tin/Lead (Sn/Pb)	QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	10 Amp	INVERTED	4	RESPONSE CONTROL	NO	e0	NOT SPECIFIED	NOT SPECIFIED	8.89 mm		85 ns
TSB14C01AMHV	Texas Instruments	LINE TRANSCEIVER	MILITARY	FLAT	68	QFF	SQUARE	CERAMIC, GLASS-SEALED	YES	5.25 V	2		CMOS			IEEE 1394		STANDARD	5 V		5		FLATPACK	QFL68,.5SQ,25		Line Driver or Receivers		4.5 V	.635 mm	125 Cel			-55 Cel	2		QUAD	S-GQFP-F68		3.912 mm	12.51 mm	Not Qualified	24 Amp		2		NO				12.51 mm		0 ns
SCAN92LV090VEHX/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	9		CMOS		2.6 ns	IEEE 1149.1	230 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20		Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel			-40 Cel	9	MATTE TIN	QUAD	S-PQFP-G64	3	1.6 mm	10 mm	Not Qualified	2 Amp		9		YES	e3	30	260	10 mm	.24 V	3.9 ns
DS92LV3242TVSX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	UNSPECIFIED	YES	3.465 V	4					GENERAL PURPOSE		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3.135 V	.5 mm	85 Cel			-40 Cel		TIN LEAD	QUAD	S-XQFP-G64		1.2 mm	10 mm	Not Qualified			4	IT ALSO NEED 1.8V I/O SUPPLY		e0			10 mm
DS08MB200TSQ	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	2		CMOS		2.5 ns	GENERAL PURPOSE	275 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20		Other Interface ICs		3 V	.5 mm	85 Cel			-40 Cel	2		QUAD	S-XQCC-N48		.8 mm	7 mm	Not Qualified			2		YES		NOT SPECIFIED	NOT SPECIFIED	7 mm		2.5 ns
SCAN921821TSM	Texas Instruments	LINE DRIVER	INDUSTRIAL	BALL	100	LFBGA	SQUARE	PLASTIC/EPOXY	YES	3.45 V	2		CMOS			IEEE 1149.1	325 mA	STANDARD	3.3 V		3.3		GRID ARRAY, LOW PROFILE, FINE PITCH	BGA100,10X10,32		Line Driver or Receivers		3.15 V	.8 mm	85 Cel			-40 Cel	2	TIN LEAD	BOTTOM	S-PBGA-B100	3	1.5 mm	10 mm	Not Qualified					YES	e0	20	235	10 mm		0 ns
DRV601RTJR	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	4.5 V	2	2				GENERAL PURPOSE	.001 mA	STANDARD	3.3 V	4.5 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	1.8 V	Line Driver or Receivers	.000001 Amp	1.8 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N20	2	.8 mm	4 mm	Not Qualified		TRUE			NO	e4	30	260	4 mm	6.15 V	0 ns
DS32EL0421SQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	2					EIA-644; TIA-644	152 mA	DIFFERENTIAL	3.3 V	2.625 V	2.5,3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	2.375 V	Line Driver or Receivers		3.135 V	.5 mm	85 Cel	2.5 V	DIFFERENTIAL	-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified		TRUE			YES	e3	30	260	7 mm		0 ns
LM2506SQX/NOPB	Texas Instruments	LINE TRANSCEIVER	OTHER	NO LEAD	40	HVQCCN	SQUARE	UNSPECIFIED	YES	2 V	1					GENERAL PURPOSE		STANDARD	1.8 V		1.8,1.8/3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.2SQ,16		Line Driver or Receivers		1.74 V	.4 mm	85 Cel			-30 Cel	1	MATTE TIN	QUAD	S-XQCC-N40	3	.8 mm	5 mm	Not Qualified			1		NO	e3	30	260	5 mm		0 ns
LM2512ASM/NOPB	Texas Instruments	LINE DRIVER	OTHER	BALL	49	FBGA	SQUARE	PLASTIC/EPOXY	YES		4						9 mA			2 V	1.8,1.8/3		GRID ARRAY, FINE PITCH	BGA49,7X7,20	1.6 V	Line Driver or Receivers	.000001 Amp		.5 mm	85 Cel	1.8 V		-30 Cel	4	TIN SILVER COPPER	BOTTOM	S-PBGA-B49	3	1.1 mm	4 mm	Not Qualified		TRUE			NO	e1	30	260	4 mm		0 ns
V62/15608-01XE	Texas Instruments	LINE TRANSCEIVER	MILITARY	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1				17 ns	EIA-485	.95 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.65 mm	125 Cel	3.3 V		-55 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-N8	2	1 mm	3 mm				1		YES	e4	30	260	3 mm		70 ns
DS32ELX0124SQ	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	2					GENERAL PURPOSE			2.5 V	3.465 V	2.5,3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3.135 V	Line Driver or Receivers		2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	2		QUAD	S-XQCC-N48		.8 mm	7 mm	Not Qualified			2		YES		NOT SPECIFIED	NOT SPECIFIED	7 mm		0 ns
DS92LV0412SQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1						95 mA		1.8 V	1.89 V	1.8,3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.71 V	Line Driver or Receivers			.5 mm	85 Cel	1.8 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm	Not Qualified		TRUE	1		NO	e3	30	260	7 mm		0 ns
DS99R106VS	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			GENERAL PURPOSE		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			0 Cel	1	TIN LEAD	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			1		YES	e0			7 mm
DRV612RGT	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1					GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1		QUAD	S-PQCC-N16		1 mm	3 mm	Not Qualified					NO				3 mm
DS560MB410ZASR	Texas Instruments	LINE RECEIVER		BALL	101	TFBGA	SQUARE	PLASTIC/EPOXY	YES	2.625 V	4	4						DIFFERENTIAL	2.5 V				GRID ARRAY, THIN PROFILE, FINE PITCH	BGA101,11X11,20				2.375 V	.5 mm	85 Cel			-40 Cel		TIN SILVER COPPER	BOTTOM	S-PBGA-B101	3	1.2 mm	6 mm				4		NO	e1		260	6 mm
DS560MB410ZAST	Texas Instruments	LINE RECEIVER		BALL	101	TFBGA	SQUARE	PLASTIC/EPOXY	YES	2.625 V	4	4						DIFFERENTIAL	2.5 V				GRID ARRAY, THIN PROFILE, FINE PITCH	BGA101,11X11,20				2.375 V	.5 mm	85 Cel			-40 Cel		TIN SILVER COPPER	BOTTOM	S-PBGA-B101	3	1.2 mm	6 mm				4		NO	e1		260	6 mm
D9LVRA2IDEMT	Texas Instruments	LINE RECEIVER		NO LEAD	10		SQUARE	PLASTIC/EPOXY	YES	1.98 V	2		CMOS		7.7 ns	EIA-644; TIA-644	25 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V					SOLCC10(UNSPEC)			.00002 Amp	1.62 V		85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N10	1				4 Amp		2		NO	e4		260			7.7 ns
D9LVRA2DEMR	Texas Instruments	LINE RECEIVER		NO LEAD	10		SQUARE	PLASTIC/EPOXY	YES	1.98 V	2		CMOS		7.7 ns	EIA-644; TIA-644	25 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V					SOLCC10(UNSPEC)			.00002 Amp	1.62 V		70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N10	1				4 Amp		2		NO	e4		260			7.7 ns
D9LVRA2DEMT	Texas Instruments	LINE RECEIVER		NO LEAD	10		SQUARE	PLASTIC/EPOXY	YES	1.98 V	2		CMOS		7.7 ns	EIA-644; TIA-644	25 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V					SOLCC10(UNSPEC)			.00002 Amp	1.62 V		70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N10	1				4 Amp		2		NO	e4		260			7.7 ns
D9LVRA2IDEMR	Texas Instruments	LINE RECEIVER		NO LEAD	10		SQUARE	PLASTIC/EPOXY	YES	1.98 V	2		CMOS		7.7 ns	EIA-644; TIA-644	25 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V					SOLCC10(UNSPEC)			.00002 Amp	1.62 V		85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N10	1				4 Amp		2		NO	e4		260			7.7 ns
SCAN921226SLC/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	BALL	49	LFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			IEEE 1149.1	120 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		GRID ARRAY, LOW PROFILE, FINE PITCH	BGA49,7X7,32	3 V	Line Driver or Receivers		3 V	.8 mm	85 Cel	3.3 V	3-STATE	-40 Cel		TIN SILVER COPPER	BOTTOM	S-PBGA-B49	4	1.5 mm	7 mm	Not Qualified		TRUE	1		NO	e1	30	260	7 mm		0 ns
TSB41BA3APFPG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES		6		CMOS			IEEE 1394		DIFFERENTIAL	3.3 V	3.6 V	1.8,3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers			.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	6	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6		YES	e4	NOT SPECIFIED	260	12 mm	.172 V	0 ns
DS99R421QSQX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	105 Cel			-40 Cel		TIN LEAD	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified			3		YES	e0			6 mm
DS16F95E/883	Texas Instruments	LINE TRANSCEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	1		BIPOLAR	MIL-STD-883	25 ns	EIA-422-A; EIA-485; SCSI-1	.5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V			CHIP CARRIER	LCC20,.35SQ	4.5 V		.00002 Amp	4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	1		QUAD	S-CQCC-N20	1	1.91 mm	8.89 mm	Not Qualified	16 Amp		1	COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER	YES				8.89 mm		38 ns
SN54ACT1284FK	Texas Instruments	LINE TRANSCEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	1				20 ns	IEEE 1284		SCHMITT TRIGGER	5 V				CHIP CARRIER					4.7 V	1.27 mm	125 Cel			-55 Cel	7		QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified			7		NO				8.89 mm		20 ns
SCAN15MB200TSQ	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		2.5 ns	GENERAL PURPOSE	275 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20		Other Interface ICs		3 V	.5 mm	85 Cel			-40 Cel	1		QUAD	S-PQCC-N48		.8 mm	7 mm	Not Qualified			1		YES		NOT SPECIFIED	NOT SPECIFIED	7 mm		2.5 ns
SNJ55182FK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR	MIL-PRF-38535		GENERAL PURPOSE	14 mA	DIFFERENTIAL	5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel			-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	16 Amp		2	BUILT-IN LINE TERMINATION; RESPONSE CONTROL	NO		NOT SPECIFIED	NOT SPECIFIED	8.89 mm		45 ns
DS92LV2422SQ	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	60	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1					GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	1.8 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					1.71 V	.5 mm	85 Cel			-40 Cel			QUAD	S-XQCC-N60		.8 mm	9 mm	Not Qualified			1						9 mm
MC3550FK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	1		BIPOLAR			GENERAL PURPOSE	60 mA	DIFFERENTIAL	5 V		+-5	-5 V	CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers		4.75 V	1.27 mm	125 Cel		3-STATE	-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	16 Amp	TRUE	4				NOT SPECIFIED	NOT SPECIFIED	8.89 mm		25 ns
DS125DF111SQ	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2	2				GENERAL PURPOSE	333 mA	DIFFERENTIAL	3.3 V	2.625 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	2.375 V			3 V	.5 mm	85 Cel	2.5 V	DIFFERENTIAL	-40 Cel	2	MATTE TIN	QUAD	S-PQCC-N24	3	.8 mm	4 mm		3 Amp	COMPLEMENTARY	2	ALSO OPERATE 3.3 VOLT SUPPLY	YES	e3	30	260	4 mm
DS99R103TVS/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			GENERAL PURPOSE	90 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		TRUE	1		YES	e3	30	260	7 mm		0 ns
DIX4192IPFBRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1		CMOS			GENERAL PURPOSE		STANDARD	1.8 V	3.6 V			FLATPACK, THIN PROFILE, FINE PITCH		3 V		.000025 Amp	1.65 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G48	2	1.2 mm	7 mm	Not Qualified		TRUE	4		YES	e4	30	260	7 mm		0 ns
THS7102TVFPR	Texas Instruments	LINE TRANSCEIVER		GULL WING	32	HLQFP	SQUARE	PLASTIC/EPOXY	YES	16 V	1					GENERAL PURPOSE		DIFFERENTIAL	15 V				FLATPACK, HEAT SINK/SLUG, LOW PROFILE					7.5 V	.8 mm					1		QUAD	S-PQFP-G32		1.6 mm	7 mm	Not Qualified			1		YES				7 mm		0 ns
SNJ55107AFK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR	MIL-PRF-38535		GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V	5.5 V	+-5	-5 V	CHIP CARRIER	LCC20,.35SQ	4.5 V	Line Driver or Receivers	75 Amp	4.5 V	1.27 mm	125 Cel	5 V	TOTEM-POLE	-55 Cel		Tin/Lead (Sn/Pb)	QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO	e0	NOT SPECIFIED	NOT SPECIFIED	8.89 mm		25 ns
TSB41AB2PAPRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4					IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	4	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified	9 Amp	COMPLEMENTARY	4		YES	e4	30	260	10 mm	.172 V	0 ns
PDS90LV028AQDQFTQ1	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	NO LEAD	8	VSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS	AEC-Q100		EIA-644; TIA-644		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			SMALL OUTLINE, VERY THIN PROFILE		3 V			3 V	.5 mm	125 Cel	3.3 V		-40 Cel			DUAL	S-PDSO-N8		.8 mm	2 mm				2		NO				2 mm		2.5 ns
SCAN926260TUF/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	BALL	196	LBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6		CMOS			IEEE 1149.1	600 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		GRID ARRAY, LOW PROFILE	BGA196,14X14,40	3 V	Line Driver or Receivers		3 V	1 mm	85 Cel	3.3 V	3-STATE	-40 Cel		TIN SILVER COPPER	BOTTOM	S-PBGA-B196	3	1.47 mm	15 mm	Not Qualified		TRUE	6		NO	e1	30	260	15 mm		0 ns
THS7102CVFPR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	32	HLQFP	SQUARE	PLASTIC/EPOXY	YES	16 V	1					GENERAL PURPOSE		DIFFERENTIAL	15 V		15		FLATPACK, HEAT SINK/SLUG, LOW PROFILE	QFP32,.35SQ,32		Line Driver or Receivers		7.5 V	.8 mm	70 Cel			0 Cel	1		QUAD	S-PQFP-G32		1.6 mm	7 mm	Not Qualified			1		YES		NOT SPECIFIED	NOT SPECIFIED	7 mm		0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.