SQUARE Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN55116FKR	Texas Instruments	LINE TRANSCEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	1		BIPOLAR		30 ns	GENERAL PURPOSE	60 mA	DIFFERENTIAL	5 V				CHIP CARRIER					4.5 V	1.27 mm	125 Cel			-55 Cel	2		QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified		COMPLEMENTARY	1	1 RECEIVER ACTIVE UNDER SHUTDOWN; CONFIGURABLE TOTEM-POLE OUTPUTS; DIFFERENTIAL OUTPUT PAIRS	YES				8.89 mm		75 ns
MC3552FK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	1		BIPOLAR			GENERAL PURPOSE	60 mA	DIFFERENTIAL	5 V		+-5	-5 V	CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers		4.75 V	1.27 mm	125 Cel		OPEN-COLLECTOR	-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	16 Amp	TRUE	4				NOT SPECIFIED	NOT SPECIFIED	8.89 mm		25 ns
SN55109AFK	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	1		BIPOLAR		15 ns	GENERAL PURPOSE	30 mA	GATED	5 V		+-5	-5 V	CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers	.00004 Amp	4.5 V	1.27 mm	125 Cel		OPEN-COLLECTOR	-55 Cel	2		QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified		COMPLEMENTARY			YES		NOT SPECIFIED	NOT SPECIFIED	8.89 mm		0 ns
TSB41BA3DPFP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	80	HQCCN	SQUARE	PLASTIC/EPOXY	YES	2 V	2					IEEE 1394B	150 mA	DIFFERENTIAL	1.85 V	3.6 V	1.8,3.3		CHIP CARRIER, HEAT SINK/SLUG	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.7 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	2		YES	e4	30	260	12 mm	.172 V	0 ns
DS92LV2421SQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1					I2C	90 mA	STANDARD	1.8 V	1.89 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V	3-STATE	-40 Cel	24	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	7 mm		0 ns
LMH6555SQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	1	BIPOLAR			GENERAL PURPOSE	156 mA	DIFFERENTIAL	3.3 V	3.63 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,20	2.97 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	3	.8 mm	4 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	4 mm	2.4 V	0 ns
SCAN92LV090VEH/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	9		CMOS		2.6 ns	IEEE 1149.1	210 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	85 Cel	3.3 V		-40 Cel	9	MATTE TIN	QUAD	S-PQFP-G64	3	1.6 mm	10 mm	Not Qualified	2 Amp		9		YES	e3	30	260	10 mm		3.9 ns
LMH6555SQE	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.63 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					2.97 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N16	2	.8 mm	4 mm						YES	e0	30	235	4 mm
LM2502SM	Texas Instruments	LINE TRANSCEIVER	OTHER	BALL	49	TFBGA	SQUARE	PLASTIC/EPOXY	YES	3.3 V	1					GENERAL PURPOSE		SCHMITT TRIGGER	3 V				GRID ARRAY, THIN PROFILE, FINE PITCH					2.9 V	.5 mm	85 Cel			-30 Cel	1	TIN SILVER COPPER	BOTTOM	S-PBGA-B49	3	1.1 mm	4 mm	Not Qualified			1		NO	e1			4 mm
SN55154FK	Texas Instruments		OTHER	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES				BIPOLAR				40 mA				5/12		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers			1.27 mm	125 Cel			-25 Cel			QUAD	S-XQCC-N20				Not Qualified	16 Amp
DIX9211PT	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1					GENERAL PURPOSE	38 mA	SCHMITT TRIGGER	3.3 V	3.6 V			FLATPACK, LOW PROFILE, FINE PITCH		2.9 V			2.9 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1		NO	e4	30	260	7 mm		0 ns
DS32EL0124SQ	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	2					GENERAL PURPOSE			2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	2	TIN LEAD	QUAD	S-XQCC-N48	2	.8 mm	7 mm	Not Qualified			2		YES	e0	30	235	7 mm
DS99R101VSX	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			GENERAL PURPOSE		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			0 Cel	1	TIN LEAD	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			1		YES	e0			7 mm
DS64BR111SQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES			2					63 mA			2.625 V	2.5/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20	2.375 V	Line Driver or Receivers			.5 mm	85 Cel	2.5 V	DIFFERENTIAL	-40 Cel		MATTE TIN	QUAD	S-PQCC-N24	3	.8 mm	4 mm	Not Qualified		COMPLEMENTARY				e3	30	260	4 mm		0 ns
SNJ55138FK	Texas Instruments	LINE TRANSCEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	1		BIPOLAR	MIL-PRF-38535	24 ns	GENERAL PURPOSE	65 mA	STANDARD	5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers	.00004 Amp	4.5 V	1.27 mm	125 Cel		OPEN-COLLECTOR	-55 Cel	4		QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	16 Amp	INVERTED	4	COMMON I/O	NO		NOT SPECIFIED	NOT SPECIFIED	8.89 mm	2 V	15 ns
DS92LV0411SQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	36	VQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	4					GENERAL PURPOSE	90 mA	STANDARD	1.8 V	3.6 V	1.8,3.3		CHIP CARRIER, VERY THIN PROFILE	LCC36,.25SQ,20	3 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	6 mm		0 ns
DS99R101VS	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			GENERAL PURPOSE		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			0 Cel	1	TIN LEAD	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			1		YES	e0			7 mm
SN55189FK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR			EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel		TOTEM-POLE	-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	10 Amp	INVERTED	4	RESPONSE CONTROL	NO		NOT SPECIFIED	NOT SPECIFIED	8.89 mm		85 ns
TSB41BA3AIPFP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES		6		CMOS			IEEE 1394		DIFFERENTIAL	3.3 V		1.8,3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ		Line Driver or Receivers			.5 mm	85 Cel			-40 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp		6		YES	e4			12 mm	.172 V	0 ns
TSB41LV03AIPFP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6		CMOS			IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	6		QUAD	S-PQFP-G80		1.2 mm	12 mm	Not Qualified	12 Amp		6		YES		NOT SPECIFIED	NOT SPECIFIED	12 mm	.172 V	0 ns
DS92LX2121SQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1					I2C	90 mA	STANDARD	1.8 V	1.89 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V	3-STATE	-40 Cel	21	MATTE TIN	QUAD	S-XQCC-N40	3	.8 mm	6 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	6 mm		0 ns
THS7103CVFPR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	32	HLQFP	SQUARE	PLASTIC/EPOXY	YES	16 V	1					GENERAL PURPOSE		DIFFERENTIAL	15 V				FLATPACK, HEAT SINK/SLUG, LOW PROFILE					7.5 V	.8 mm	70 Cel			0 Cel	1		QUAD	S-PQFP-G32		1.6 mm	7 mm	Not Qualified			1		YES				7 mm		0 ns
TLK4120IGPV	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	289	BGA	SQUARE	PLASTIC/EPOXY	YES	2.7 V	4					GENERAL PURPOSE		DIFFERENTIAL	2.5 V				GRID ARRAY					2.3 V	1 mm	85 Cel			-40 Cel	4		BOTTOM	S-PBGA-B289		2 mm	19 mm	Not Qualified			4		YES		NOT SPECIFIED	NOT SPECIFIED	19 mm		0 ns
TSB41AB3	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1					IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3 V				FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH					2.7 V	.5 mm	70 Cel			0 Cel	6		QUAD	S-PQFP-G80		1.2 mm	12 mm	Not Qualified			6		YES				12 mm
DS32EL0421SQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	2					EIA-644; TIA-644	152 mA	DIFFERENTIAL	3.3 V	2.625 V	2.5,3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	2.375 V	Line Driver or Receivers		3.135 V	.5 mm	85 Cel	2.5 V	DIFFERENTIAL	-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified		TRUE			YES	e3	30	260	7 mm		0 ns
DRV600RTJR	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	4.5 V	2	2				GENERAL PURPOSE	10 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	4.5 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20	1.8 V	Line Driver or Receivers	.000001 Amp	1.8 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N20	2	.8 mm	4 mm	Not Qualified		TRUE			YES	e4	30	260	4 mm	6.15 V	0 ns
DS32ELX0124SQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	2					EIA-644; TIA-644	127 mA	DIFFERENTIAL	2.5 V	3.465 V	2.5,3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3.135 V	Line Driver or Receivers		2.375 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel		MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified		COMPLEMENTARY	2		YES	e3	30	260	7 mm		0 ns
TSB21LV03BIPM	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	3		CMOS			IEEE 1394	175 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3/3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	2		QUAD	S-PQFP-G64		1.6 mm	10 mm	Not Qualified	12 Amp		2		YES		NOT SPECIFIED	NOT SPECIFIED	10 mm	.172 V	0 ns
SNJ55189FK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-PRF-38535		EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel		TOTEM-POLE	-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	10 Amp	INVERTED	4	RESPONSE CONTROL	NO		NOT SPECIFIED	NOT SPECIFIED	8.89 mm		85 ns
TSB81BA3DIPFP	Texas Instruments		INDUSTRIAL	GULL WING	80	QFP	SQUARE	PLASTIC/EPOXY	YES				CMOS								1.8,3.3		FLATPACK	TQFP80,.55SQ		Line Driver or Receivers			.5 mm	85 Cel			-40 Cel	6		QUAD	S-PQFP-G80				Not Qualified	4 Amp				YES					.172 V
DS99R104TSQX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1		CMOS			GENERAL PURPOSE	90 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-XQCC-N48	2	.8 mm	7 mm	Not Qualified		TRUE	1		NO	e3	30	260	7 mm		0 ns
DS92LV18TVVX	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.45 V	1		CMOS			GENERAL PURPOSE	320 mA	DIFFERENTIAL	3.3 V		3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP80,.55SQ,20		Line Driver or Receivers		3.15 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-PQFP-G80	3	1.6 mm	12 mm	Not Qualified			1		YES	e0		260	12 mm		0 ns
DS99R106SQ	Texas Instruments	LINE RECEIVER	COMMERCIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1		CMOS			GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	70 Cel			0 Cel	1	TIN LEAD	QUAD	S-XQCC-N48	2	.8 mm	7 mm	Not Qualified			1		YES	e0			7 mm
TSB41AB2PAP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	4	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified	9 Amp	COMPLEMENTARY	4		YES	e4	30	260	10 mm	.172 V	0 ns
TSB41LV01PAP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2					IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			0 Cel	2		QUAD	S-PQFP-G64		1.2 mm	10 mm	Not Qualified			2		YES				10 mm		0 ns
DS50EV401SQE	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	4					GENERAL PURPOSE		DIFFERENTIAL	2.5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					2.375 V	.5 mm	85 Cel			-40 Cel	4	TIN LEAD	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified			4	ALSO OPERATE 3.3 VOLT SUPPLY	YES	e0			7 mm
SN5510AFKR	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR		25 ns	V.35		GATED	5 V			-5 V	CHIP CARRIER					4.5 V	1.27 mm	125 Cel			-55 Cel	2		QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified				HIGH DRIVE	YES				8.89 mm		0 ns
DS38C86AVB	Texas Instruments	LINE TRANSCEIVER		GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES		1		CMOS			IEEE 1194.1		SCHMITT TRIGGER					FLATPACK, LOW PROFILE, FINE PITCH						.5 mm			OPEN-DRAIN		9	Tin/Lead (Sn/Pb)	QUAD	S-PQFP-G48		1.6 mm	7 mm	Not Qualified		INVERTED	9		NO	e0			7 mm		0 ns
SN55ALS193FK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		TTL			V.10; V.11; X.26; X.27; EIA-422-A; EIA-423-A		DIFFERENTIAL SCHMITT TRIGGER	5 V				CHIP CARRIER					4.5 V	1.27 mm	125 Cel			-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified			1						8.89 mm		22 ns
TSB14C01MPM	Texas Instruments	LINE TRANSCEIVER	MILITARY	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES		1												FLATPACK, LOW PROFILE, FINE PITCH						.5 mm							QUAD	S-PQFP-G64		1.6 mm	10 mm	Not Qualified									10 mm
DS92LV0412SQE	Texas Instruments	LINE RECEIVER		NO LEAD	48		SQUARE	UNSPECIFIED	YES														CHIP CARRIER													QUAD	S-XQCC-N48				Not Qualified
DS99R103TVS	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			GENERAL PURPOSE		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			1		YES	e0			7 mm
DS40MB200SQE	Texas Instruments		OTHER	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES				BICMOS						3.3 V		3.3		CHIP CARRIER	LCC48,.27SQ,20		Line Driver or Receivers			.5 mm	85 Cel			0 Cel		TIN LEAD	QUAD	S-PQCC-N48	3			Not Qualified						e0		260
DRV612RGTT	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	2				GENERAL PURPOSE		SCHMITT TRIGGER	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	3 V	Line Driver or Receivers	.000001 Amp	3 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N16	2	1 mm	3 mm	Not Qualified					NO	e4	NOT SPECIFIED	260	3 mm	6.15 V	0 ns
TSB14C01IPM	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES		1												FLATPACK, LOW PROFILE, FINE PITCH						.5 mm							QUAD	S-PQFP-G64		1.6 mm	10 mm	Not Qualified									10 mm
SN55173FK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-PRF-38535		V.10; V.11; X.26; X.27; EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; EIA-485-A; TIA-485-A	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel		3-STATE	-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	16 Amp	TRUE	4		NO		NOT SPECIFIED	NOT SPECIFIED	8.89 mm		35 ns
DRV600RTJRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	4.5 V	2					GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.16SQ,20		Line Driver or Receivers	.000001 Amp	1.8 V	.5 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N20	2	.8 mm	4 mm	Not Qualified					YES	e4	30	260	4 mm	6.15 V	0 ns
SCAN928028TUFX	Texas Instruments	LINE DRIVER	INDUSTRIAL	BALL	196	LBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	8		CMOS		.4 ns	IEEE 1149.1	350 mA	STANDARD	3.3 V		3.3		GRID ARRAY, LOW PROFILE	BGA196,14X14,40		Line Driver or Receivers		3 V	1 mm	85 Cel			-40 Cel	8	TIN LEAD	BOTTOM	S-PBGA-B196	3	1.47 mm	15 mm	Not Qualified					YES	e0	20	220	15 mm		0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.