SQUARE Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
THS6072CDGN	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	16.5 V	2	2	BIPOLAR			GENERAL PURPOSE	5 mA	DIFFERENTIAL	15 V	16 V	+-5/+-15	-15 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	4.5 V	Line Driver or Receivers		4.5 V	.65 mm	70 Cel	15 V		0 Cel		NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.07 mm	.085 A	3 mm	Not Qualified			2	ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO	e4	30	260	3 mm		0 ns
DS15BR400TVS	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1				2 ns	GENERAL PURPOSE	215 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	TIN LEAD	QUAD	S-PQFP-G48	3	1.2 mm		7 mm	Not Qualified		COMPLEMENTARY	4		YES	e0		260	7 mm	2 V	2 ns
AM26C31MFK	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	HQCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11	3.2 mA	STANDARD	5 V		5		CHIP CARRIER, HEAT SINK/SLUG	LCC20,.35SQ		Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	125 Cel		3-STATE	-55 Cel	4		QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Not Qualified		COMPLEMENTARY			YES				8.89 mm	2 V	0 ns
DS90UR904QSQX/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1			AEC-Q100		I2C	96 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	105 Cel	1.8 V	DIFFERENTIAL	-40 Cel	1	Matte Tin (Sn)	QUAD	S-XQCC-N48	3	.8 mm		7 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	NOT SPECIFIED	260	7 mm		0 ns
5962-9319401M2X	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4			MIL-STD-883	25 ns	GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	CHIP CARRIER					4.5 V		125 Cel			-55 Cel			QUAD	S-CQCC-N20								4		NO						25 ns
DS90UB925QSQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100		ISO 10605	170 mA	STANDARD	3.3 V	3.6 V	1.8/3.3,3.3		CHIP CARRIER	LCC48,.27SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm		7 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	7 mm		0 ns
V62/03670-02XE	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	2 V	6		CMOS			IEEE 1394		DIFFERENTIAL	1.85 V	3.6 V	1.8,3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.75 V	.5 mm	110 Cel	3.3 V	DIFFERENTIAL	-40 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm		12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6		YES	e4	30	260	12 mm	.172 V	0 ns
DS90UH948TNKDRQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	2			AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER	3.3 V	1.26 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.14 V			3 V	.5 mm	105 Cel	1.2 V		-40 Cel		Matte Tin (Sn)	QUAD	S-XQCC-N64	3	.8 mm		9 mm				2	ALSO HAS SUPPLY VOLTAGE FROM 1.14 TO 1.26 V	NO	e3	30	260	9 mm
DS90UR908QSQX	Texas Instruments	LINE DRIVER		NO LEAD	48		SQUARE	UNSPECIFIED	YES														CHIP CARRIER												TIN LEAD	QUAD	S-XQCC-N48	1				Not Qualified						e0	30	235
SN75LVDT1422PAGR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-644; TIA-644	49 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	-10 Cel	14	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G64	3	1.2 mm		10 mm	Not Qualified		COMPLEMENTARY	14		YES	e4	30	260	10 mm		0 ns
DS90UR910QSQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm		6 mm				1		YES	e3	30	260	6 mm
LMH0341SQX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	6					GENERAL PURPOSE		STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel		TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm		7 mm	Not Qualified			6		NO	e0	30	235	7 mm
DS90UB904QSQ	Texas Instruments	LINE RECEIVER		NO LEAD	48		SQUARE	UNSPECIFIED	YES														CHIP CARRIER													QUAD	S-XQCC-N48					Not Qualified
LMH0002SQ	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25		Line Driver or Receivers		3.135 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-PQCC-N16	1	.8 mm		4 mm	Not Qualified					YES	e0		260	4 mm	.75 V	0 ns
LMH0071SQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	1					GENERAL PURPOSE	127 mA	DIFFERENTIAL	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel		MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm		7 mm			COMPLEMENTARY	5		YES	e3	30	260	7 mm		0 ns
DS90UB903QSQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1			AEC-Q100		GENERAL PURPOSE	90 mA	STANDARD	1.8 V	1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm		6 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	6 mm		0 ns
DS90C124QVS	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	105 Cel			-40 Cel		TIN LEAD	QUAD	S-PQFP-G48	1	1.2 mm		7 mm				24		NO	e0	30	235	7 mm
5962-9163901Q2X	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BICMOS	MIL-PRF-38535 Class Q	12 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V	5.5 V			CHIP CARRIER		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	4		QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Qualified					YES				8.89 mm
DS90UB903QSQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1			AEC-Q100		GENERAL PURPOSE	90 mA	STANDARD	1.8 V	1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm		6 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	6 mm		0 ns
LMH0070SQ	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	5					GENERAL PURPOSE		STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	5	TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm		7 mm	Not Qualified					NO	e0	30	235	7 mm
SN75LVCP601RTJT	Texas Instruments	LINE DRIVER	OTHER	NO LEAD	20	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2	2			.4 ns	GENERAL PURPOSE	80 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			CHIP CARRIER	LCC20,.16SQ,20	3 V		.00003 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N20	2	.8 mm		4 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	4 mm		0 ns
DS90UR916QSQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	60	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			110 mA			1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC60,.35SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N60	3	.8 mm		9 mm	Not Qualified			1		YES	e3	30	260	9 mm		0 ns
5962-9164001M2X	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		CMOS	MIL-STD-883		EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V			CHIP CARRIER		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel			QUAD	S-CQCC-N20		1.905 mm		8.89 mm	Qualified			4						8.89 mm		35 ns
SN65LVDS307ZQCT	Texas Instruments	LINE DRIVER	INDUSTRIAL	BALL	48	VFBGA	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1		CMOS			GENERAL PURPOSE	25.8 mA	STANDARD	1.8 V		1.8		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA48,7X7,20		Line Driver or Receivers		1.65 V	.5 mm	85 Cel			-40 Cel	2	TIN SILVER COPPER	BOTTOM	S-PBGA-B48	3	1 mm		4 mm	Not Qualified					YES	e1	30	260	4 mm		0 ns
DS90C124IVSX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	105 Cel			-40 Cel		TIN LEAD	QUAD	S-PQFP-G48	3	1.2 mm		7 mm	Not Qualified			24		NO	e0			7 mm
SN65LBC180RSATG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1		BICMOS		18 ns	EIA-485; ISO 8482	4 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	.65 mm	85 Cel	5 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N16	2	1 mm		4 mm	Not Qualified	8 Amp	TRUE	1	TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e4	NOT SPECIFIED	260	4 mm	1.1 V	33 ns
THS6022CGQER	Texas Instruments	LINE DRIVER	COMMERCIAL	BALL	80	VFBGA	SQUARE	PLASTIC/EPOXY	YES	16 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	15 V			-15 V	GRID ARRAY, VERY THIN PROFILE, FINE PITCH					4.5 V	.5 mm	70 Cel			0 Cel	2	TIN LEAD	BOTTOM	S-PBGA-B80	2A	1 mm		5 mm	Not Qualified				ALSO OPERATES AT 9V TO 32V SINGLE SUPPLY	NO	e0			5 mm		0 ns
LMH0040SQX	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	5					GENERAL PURPOSE		STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	5	TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm		7 mm	Not Qualified					NO	e0	30	235	7 mm
DS10BR254TSQ/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		6								3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	3 V	Line Driver or Receivers	.00001 Amp		.5 mm	85 Cel	3.3 V		-40 Cel	4	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm		6 mm	Not Qualified		TRUE	2		NO	e3	30	260	6 mm		0 ns
SN75C3238ECRHBR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	32	VQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	3		BIPOLAR			EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V		3.3/5		CHIP CARRIER, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers	.000001 Amp	3 V	.5 mm	70 Cel			0 Cel	5		QUAD	S-PQCC-N32		1 mm		5 mm	Not Qualified	1.6 Amp		3	ALSO OPERATES AT 5V SUPPLY	NO				5 mm	10 V	0 ns
SN65LBC180RSAT	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1		BICMOS		18 ns	EIA-485; ISO 8482	4 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	.65 mm	85 Cel	5 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N16	2	1 mm		4 mm	Not Qualified	8 Amp	TRUE	1	TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e4	NOT SPECIFIED	260	4 mm	1.1 V	33 ns
SN65LVDS303ZQER	Texas Instruments	LINE DRIVER	INDUSTRIAL	BALL	80	VFBGA	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1		CMOS			GENERAL PURPOSE	25.8 mA	STANDARD	1.8 V		1.8		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA80,9X9,20		Line Driver or Receivers		1.65 V	.5 mm	85 Cel			-40 Cel	2	TIN SILVER COPPER	BOTTOM	S-PBGA-B80	3	1 mm		5 mm	Not Qualified			3		YES	e1	30	260	5 mm		0 ns
LMH0040SQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	5					GENERAL PURPOSE		DIFFERENTIAL	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	5	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm		7 mm						NO	e3	30	260	7 mm		0 ns
DS90CF388VJD	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	8		CMOS			EIA-644; TIA-644		DIFFERENTIAL	3.3 V		3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ		Line Driver or Receivers		3 V	.5 mm	70 Cel			-10 Cel		TIN LEAD	QUAD	S-PQFP-G100	3	1.2 mm		14 mm	Not Qualified			8		NO	e0		260	14 mm		0 ns
5962-86889012A	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	15 V	4		BIPOLAR	MIL-PRF-38535	350 ns	EIA-232-E; TIA-232-E; V.28	34 mA	GATED	9 V	15 V	+-9	-9 V	CHIP CARRIER	LCC20,.35SQ	7.5 V	Line Driver or Receivers	.00001 Amp	7.5 V	1.27 mm	125 Cel	9 V		-55 Cel	4	Tin/Lead (Sn/Pb)	QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Qualified				1 SINGLE INPUT DRIVER	NO	e0	NOT SPECIFIED	NOT SPECIFIED	8.89 mm	12 V	0 ns
DS90C241QVSX	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100		GENERAL PURPOSE		STANDARD	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	105 Cel			-40 Cel	24	TIN LEAD	QUAD	S-PQFP-G48	1	1.2 mm		7 mm						YES	e0	30	235	7 mm
SN65LBC180RSAR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1		BICMOS		18 ns	EIA-485; ISO 8482	4 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	.65 mm	85 Cel	5 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N16	2	1 mm		4 mm	Not Qualified	8 Amp	TRUE	1	TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e4	NOT SPECIFIED	260	4 mm	1.1 V	33 ns
DS90UR241IVS	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	AEC-Q100		ISO 10605		STANDARD	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	105 Cel			-40 Cel	24	TIN LEAD	QUAD	S-PQFP-G48	3	1.2 mm		7 mm	Not Qualified			1		YES	e0			7 mm
SN74AVCA406EZXYR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	20	VFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1				7.7 ns	GENERAL PURPOSE	.02 mA	STANDARD	1.8 V	3.6 V	1.2/3.6		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA20,4X5,20	1.2 V	Other Interface ICs		1.2 V	.5 mm	85 Cel	1.8 V	3-STATE	-40 Cel	1	TIN SILVER COPPER	BOTTOM	S-PBGA-B20	1	.61 mm		3 mm	Not Qualified	.08 Amp	TRUE	1		NO	e1	30	260	3 mm		7.7 ns
5962-9076602M2X	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-STD-883		EIA-422-A; EIA-423-A; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V			CHIP CARRIER		4.75 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel			QUAD	S-CQCC-N20		1.905 mm		8.89 mm	Qualified			4						8.89 mm		30 ns
LMH0051SQX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	6					GENERAL PURPOSE		STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel		TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm		7 mm	Not Qualified			6		NO	e0	30	235	7 mm
LMH0340SQX	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	5					GENERAL PURPOSE		STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	5	TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm		7 mm	Not Qualified					NO	e0	30	235	7 mm
TRS3243EIRHBRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	3					EIA-232-F; TIA-232-F	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	3 V	Line Driver or Receivers	.000001 Amp	3 V	.5 mm	85 Cel	3.3 V		-40 Cel	3	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N32	2	1 mm		5 mm	Not Qualified	.001 Amp	INVERTED	5		NO	e4	NOT SPECIFIED	260	5 mm	10 V	0 ns
DS90UH925ATRHSJQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100		ISO 10605		STANDARD	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.5 mm	105 Cel	3.3 V		-40 Cel	1	Matte Tin (Sn)	QUAD	S-PQCC-N48	3	.8 mm		7 mm						YES	e3	NOT SPECIFIED	260	7 mm
SN65HVD63RGTR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1				5000 ns	EIA-485		STANDARD		5.5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.6 V	.5 mm	105 Cel			-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N16	2	1 mm		3 mm				1		NO	e4	NOT SPECIFIED	NOT SPECIFIED	3 mm		11000 ns
SN74AVCA406EGQSR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	24	VFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1				7.7 ns	GENERAL PURPOSE		STANDARD	1.8 V		1.2/3.6		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA24,5X5,20		Other Interface ICs		1.2 V	.5 mm	85 Cel			-40 Cel	1		BOTTOM	S-PBGA-B24		1 mm		3 mm	Not Qualified			1		NO		NOT SPECIFIED	NOT SPECIFIED	3 mm		7.7 ns
5962-7802302M2X	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-STD-883	25 ns	GENERAL PURPOSE		STANDARD	5 V	5.5 V			CHIP CARRIER		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	4		QUAD	S-CQCC-N20		1.905 mm		8.89 mm	Qualified					YES				8.89 mm
SN65HVD63RGTT	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1				5000 ns	EIA-485		STANDARD		5.5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.6 V	.5 mm	105 Cel			-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N16	2	1 mm		3 mm				1		NO	e4	NOT SPECIFIED	NOT SPECIFIED	3 mm		11000 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.