SQUARE Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN75LVCP412CDRTJR	Texas Instruments	LINE TRANSCEIVER	OTHER	NO LEAD	20	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2	2			.45 ns	GENERAL PURPOSE	78 mA	DIFFERENTIAL	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V		.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N20	2	.8 mm		4 mm			COMPLEMENTARY	2		YES	e4	NOT SPECIFIED	260	4 mm		.45 ns
5962-87547012X	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR	MIL-STD-883	25 ns	V.35		GATED	5 V	5.25 V		-5 V	CHIP CARRIER		4.75 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	2		QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Qualified				HIGH DRIVE	YES				8.89 mm
DS90CR486VS	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.46 V	8		CMOS			EIA-644; TIA-644		DIFFERENTIAL	3.3 V		3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ		Line Driver or Receivers		3.14 V	.5 mm	70 Cel			-10 Cel		TIN LEAD	QUAD	S-PQFP-G100	3	1.2 mm		14 mm	Not Qualified			9		NO	e0		260	14 mm		0 ns
LMH0001SQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1					GENERAL PURPOSE	43 mA	DIFFERENTIAL	3.3 V	3.465 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	3.135 V	Line Driver or Receivers		3.135 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	1	.8 mm		4 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	4 mm	.75 V	0 ns
SN65LVDS308ZQCT	Texas Instruments	LINE RECEIVER	INDUSTRIAL	BALL	48	VFBGA	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1		CMOS			GENERAL PURPOSE	37 mA	DIFFERENTIAL	1.8 V		1.8		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA48,7X7,20		Line Driver or Receivers		1.65 V	.5 mm	85 Cel			-40 Cel		TIN SILVER COPPER	BOTTOM	S-PBGA-B48	3	1 mm		4 mm	Not Qualified			2		NO	e1	30	260	4 mm		0 ns
SN75LBC180RGVT	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	16	VQCCN	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1		BICMOS		18 ns	EIA-485; ISO 8482	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER, VERY THIN PROFILE	LCC16,.16SQ,25		Line Driver or Receivers	.0001 Amp	4.75 V	.65 mm	70 Cel			0 Cel	1		QUAD	S-PQCC-N16	2	1 mm		4 mm	Not Qualified	8 Amp		1		YES		30	260	4 mm	1.5 V	33 ns
DS110RT410SQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	4	4				GENERAL PURPOSE		DIFFERENTIAL	2.5 V	2.625 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.375 V			2.375 V	.5 mm	85 Cel	2.5 V		-40 Cel	4	MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm		7 mm				4		YES	e3	30	260	7 mm	2 V	0 ns
SN65LVDS308ZQCR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	BALL	48	VFBGA	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1		CMOS			GENERAL PURPOSE	37 mA	DIFFERENTIAL	1.8 V	1.95 V	1.8		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA48,7X7,20	1.65 V	Line Driver or Receivers	.00002 Amp	1.65 V	.5 mm	85 Cel	1.8 V	DIFFERENTIAL	-40 Cel	2	TIN SILVER COPPER	BOTTOM	S-PBGA-B48	3	1 mm		4 mm	Not Qualified		TRUE	2		NO	e1	30	260	4 mm		0 ns
DS90LV028AQDQFTQ1	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	NO LEAD	8	VSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS	AEC-Q100		EIA-644; TIA-644		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, VERY THIN PROFILE					3 V	.5 mm	125 Cel			-40 Cel		Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	DUAL	S-PDSO-N8	1	.8 mm		2 mm				2		NO	e4	30	260	2 mm		2.5 ns
DS90UH927QSQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			160 mA		3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	3 V	Line Driver or Receivers			.5 mm	105 Cel	3.3 V		-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm		6 mm	Not Qualified					NO	e3	30	260	6 mm		0 ns
DS90UH925QSQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1			AEC-Q100		ISO 10605	170 mA	STANDARD	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	24	Matte Tin (Sn)	QUAD	S-XQCC-N48	3	.8 mm		7 mm	Not Qualified		COMPLEMENTARY			YES	e3	NOT SPECIFIED	260	7 mm		0 ns
LMH0002SQ/S250	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25		Line Driver or Receivers		3.135 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N16	1	.8 mm		4 mm	Not Qualified					YES	e3	30	260	4 mm	.75 V	0 ns
SN65LVDS307ZQCR	Texas Instruments	LINE DRIVER	INDUSTRIAL	BALL	48	VFBGA	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1		CMOS			GENERAL PURPOSE	25.8 mA	STANDARD	1.8 V	1.95 V	1.8		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA48,7X7,20	1.65 V	Line Driver or Receivers	.00002 Amp	1.65 V	.5 mm	85 Cel	1.8 V	DIFFERENTIAL	-40 Cel	2	TIN SILVER COPPER	BOTTOM	S-PBGA-B48	3	1 mm		4 mm	Not Qualified		COMPLEMENTARY			YES	e1	30	260	4 mm		0 ns
DS90C241IVS	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	AEC-Q100		GENERAL PURPOSE		STANDARD	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	105 Cel			-40 Cel	24	TIN LEAD	QUAD	S-PQFP-G48	3	1.2 mm		7 mm	Not Qualified					YES	e0			7 mm
SN75LVCP412ARTJT	Texas Instruments	LINE TRANSCEIVER	OTHER	NO LEAD	20	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	2			.5 ns	GENERAL PURPOSE	78 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V		.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	0 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N20	2	.8 mm		4 mm	Not Qualified		COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4 mm		.5 ns
DS90UB926QSQ/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	60	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			145 mA		3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC60,.35SQ,20	3 V	Line Driver or Receivers			.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N60	3	.8 mm		9 mm	Not Qualified			1		NO	e3	30	260	9 mm		0 ns
THS6062CDGN	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	16 V	2	2	BIPOLAR			GENERAL PURPOSE	10.5 mA	DIFFERENTIAL	15 V	16 V		-15 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH		2.5 V			2.5 V	.65 mm	70 Cel	15 V		0 Cel		NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.07 mm	.09 A	3 mm	Not Qualified			2	ALSO OPERATES AT 5V TO 32V SINGLE SUPPLY	NO	e4	30	260	3 mm		0 ns
DS90CR485VS/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES	2.62 V	8					EIA-644; TIA-644	105 mA	STANDARD	2.5 V	3.46 V	2.5,2.5/3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ	2.37 V	Line Driver or Receivers		2.37 V	.5 mm	70 Cel	2.5 V	3-STATE	-10 Cel	9	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQFP-G100	3	1.2 mm		14 mm	Not Qualified		TRUE			YES	e4	NOT SPECIFIED	260	14 mm		0 ns
DS90UA101TRTVJQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100					1.8 V	1.89 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-PQCC-N32	3	.8 mm		5 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	5 mm		0 ns
DS90UR906QSQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	60	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.71 V	.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-XQCC-N60	3	.8 mm		9 mm	Not Qualified			1		NO	e3	30	260	9 mm
SN65LVDS310ZQCR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	BALL	48	VFBGA	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1		CMOS				25 mA	DIFFERENTIAL	1.8 V	1.95 V	1.8		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA48,7X7,20	1.65 V	Line Driver or Receivers	.00002 Amp	1.65 V	.5 mm	85 Cel	1.8 V		-40 Cel		TIN SILVER COPPER	BOTTOM	S-PBGA-B48	3	1 mm		4 mm	Not Qualified	390 Amp	TRUE	27		NO	e1	30	260	4 mm		2.5 ns
DS90UB924TRHSRQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm		7 mm				1		NO	e3	30	260	7 mm
5962-9583401Q2X	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		CMOS	MIL-PRF-38535 Class Q		IEEE P1596.3		DIFFERENTIAL	5 V	5.5 V			CHIP CARRIER		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel			QUAD	S-CQCC-N20		1.905 mm		8.89 mm	Qualified			4						8.89 mm		8 ns
SN65MLVD2DRBTG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-899; TIA-899	25 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,25		Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N8	2	1 mm		3 mm	Not Qualified	8 Amp		1		NO	e4	30	260	3 mm	.48 V	6 ns
LMH0341SQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	6					GENERAL PURPOSE	127 mA	STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm		7 mm	Not Qualified			6		NO	e3	30	260	7 mm	2.7 V	0 ns
DS90CR482VS/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	8					EIA-644; TIA-644	280 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ	3 V	Line Driver or Receivers	.000015 Amp	3 V	.5 mm	70 Cel	3.3 V	3-STATE	-10 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQFP-G100	3	1.2 mm		14 mm	Not Qualified		TRUE	9		NO	e4	NOT SPECIFIED	260	14 mm		0 ns
LMH0050SQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	5					GENERAL PURPOSE		DIFFERENTIAL	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	5	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm		7 mm						NO	e3	30	260	7 mm		0 ns
DS15MB200TSQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		2.5 ns	GENERAL PURPOSE	275 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Other Interface ICs	.0002 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	2	MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm		7 mm	Not Qualified		COMPLEMENTARY	2		YES	e3	30	260	7 mm		2.5 ns
DS15BR401TSQX	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1				2 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	4		QUAD	S-XQCC-N32		.8 mm		5 mm	Not Qualified			4		YES		NOT SPECIFIED	NOT SPECIFIED	5 mm		2 ns
5962-89680012A	Texas Instruments	LINE TRANSCEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.25 V	8			MIL-STD-883	16 ns	IEEE-488		SCHMITT TRIGGER	5 V	5.25 V			CHIP CARRIER		4.75 V		.00002 Amp	4.75 V		125 Cel	5 V	DIFFERENTIAL	-55 Cel	8	TIN LEAD	QUAD	S-CQCC-N20					Qualified		COMPLEMENTARY	8		NO	e0					18 ns
SN65LBC180RGVTG4	Texas Instruments		INDUSTRIAL	NO LEAD	16	QCCN	SQUARE	PLASTIC/EPOXY	YES				BICMOS				5 mA		5 V		5		CHIP CARRIER	LCC16,.16SQ,25		Line Driver or Receivers	.0001 Amp		.635 mm	85 Cel			-40 Cel	1		QUAD	S-PQCC-N16					Not Qualified	8 Amp				YES					1.1 V	33 ns
SN65LVDS302ZXH	Texas Instruments	LINE RECEIVER	INDUSTRIAL	BALL	80	VFBGA	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1					GENERAL PURPOSE	68 mA	DIFFERENTIAL	1.8 V				GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA80,9X9,20			.00002 Amp	1.65 V	.5 mm	85 Cel			-40 Cel		TIN SILVER COPPER	BOTTOM	S-PBGA-B80	3	1 mm		5 mm		2 Amp	TRUE	3		NO	e1	30	260	5 mm
DS90UH928QSQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD		HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			250 mA			3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V				.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm		7 mm				1		NO	e3	30	260	7 mm		0 ns
5962-01-229-9389	Texas Instruments		MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES				BIPOLAR	38535Q/M;38534H;883B			50 mA		5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers			1.27 mm	125 Cel			-55 Cel			QUAD	S-XQCC-N20					Not Qualified	20 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
LMH0002SQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1					GENERAL PURPOSE	49 mA	DIFFERENTIAL	3.3 V	3.399 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	3.201 V	Line Driver or Receivers		3.135 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N16	1	.8 mm		4 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	4 mm	.75 V	0 ns
SN75LVDS9637DGK	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2					EIA-644; TIA-644		DIFFERENTIAL	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	70 Cel			0 Cel		TIN LEAD	DUAL	S-PDSO-G8	1	1.1 mm		3 mm	Not Qualified			2			e0			3 mm		6 ns
SN75LVDS9638DGKG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		6 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00002 Amp	3 V	.65 mm	70 Cel		3-STATE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.07 mm		3 mm	Not Qualified					YES	e4	30	260	3 mm	.247 V	0 ns
SN75LBC180RGVR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	16	VQCCN	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1		BICMOS		18 ns	EIA-485; ISO 8482	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER, VERY THIN PROFILE	LCC16,.16SQ,25		Line Driver or Receivers	.0001 Amp	4.75 V	.65 mm	70 Cel			0 Cel	1		QUAD	S-PQCC-N16	2	1 mm		4 mm	Not Qualified	8 Amp		1		YES		30	260	4 mm	1.5 V	33 ns
LMH0001SQ	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3.135 V	.65 mm	85 Cel			-40 Cel	2	TIN LEAD	QUAD	S-XQCC-N16	1	.8 mm		4 mm	Not Qualified					YES	e0		260	4 mm
DS90UR124QVS	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	AEC-Q100		ISO 10605		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	105 Cel			-40 Cel		TIN LEAD	QUAD	S-PQFP-G64	2	1.2 mm		10 mm	Not Qualified			24		NO	e0	30	235	10 mm
AM26C31MFKR	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	HQCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11	3.2 mA	STANDARD	5 V				CHIP CARRIER, HEAT SINK/SLUG					4.5 V	1.27 mm	125 Cel		3-STATE	-55 Cel	4		QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Not Qualified		COMPLEMENTARY			YES				8.89 mm
5962-9076504Q2X	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.25 V	4		BICMOS	MIL-PRF-38535 Class Q	40 ns	EIA-485		STANDARD	5 V	5.25 V			CHIP CARRIER		4.75 V			4.75 V	1.27 mm	125 Cel	5 V		-55 Cel	4		QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Qualified					YES				8.89 mm
DS90CF386SLC	Texas Instruments	LINE RECEIVER	COMMERCIAL	BALL	64	LFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644	135 mA	DIFFERENTIAL	3.3 V		3.3		GRID ARRAY, LOW PROFILE, FINE PITCH	BGA64,8X8,32		Line Driver or Receivers		3 V	.8 mm	70 Cel			-10 Cel			BOTTOM	S-PBGA-B64	3	1.5 mm		8 mm	Not Qualified			4				20	235	8 mm		0 ns
DS90CR485VS	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES	2.62 V	8					EIA-644; TIA-644		STANDARD	2.5 V	3.46 V	2.5,2.5/3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ	2.37 V	Line Driver or Receivers		2.37 V	.5 mm	70 Cel	2.5 V		-10 Cel	9	TIN LEAD	QUAD	S-PQFP-G100	3	1.2 mm		14 mm	Not Qualified					YES	e0		260	14 mm		0 ns
DS90UB901QSQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			90 mA			1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N32	3	.8 mm		5 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	5 mm		0 ns
DS90CR484VJDX/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	8		CMOS		51.69 ns	EIA-644; TIA-644		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ		Line Driver or Receivers		3 V	.5 mm	70 Cel			-10 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G100	3	1.2 mm		14 mm	Not Qualified			8			e4	30	260	14 mm		97.4 ns
5962-86889012X	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	15 V	4		BIPOLAR	MIL-STD-883	175 ns	EIA-232-E; TIA-232-E; V.28		GATED	9 V	15 V		-9 V	CHIP CARRIER		7.5 V			7.5 V	1.27 mm	125 Cel	9 V		-55 Cel	4		QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Qualified					NO				8.89 mm
SN65HVD1471DGK	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1				550 ns	EIA-485	1.1 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.65 mm	125 Cel	3.3 V		-40 Cel	1	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	DUAL	S-PDSO-G8	1	1.1 mm		3 mm				1		YES	e4	NOT SPECIFIED	260	3 mm		110 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.