SQUARE Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
DS08MB200TSQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	2		CMOS		2.5 ns	GENERAL PURPOSE	275 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Other Interface ICs	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified		COMPLEMENTARY	2		YES	e3	30	260	7 mm		2.5 ns
PCI6060IRCP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	64	HVFQFP	SQUARE	PLASTIC/EPOXY	YES	2.7 V	1					GENERAL PURPOSE		DIFFERENTIAL	2.5 V				FLATPACK, HEAT SINK/SLUG, VERY THIN PROFILE, FINE PITCH					2.3 V	.5 mm	85 Cel			-40 Cel	16		QUAD	S-PQFP-G64		1 mm	10 mm	Not Qualified			16		YES				10 mm		0 ns
TSB41AB2IPAPR	Texas Instruments		INDUSTRIAL	GULL WING	64	QFP	SQUARE	PLASTIC/EPOXY	YES										3.3 V		3.3		FLATPACK	TQFP64,.47SQ		Line Driver or Receivers			.5 mm	85 Cel			-40 Cel	4		QUAD	S-PQFP-G64				Not Qualified	9 Amp				YES					.172 V
DS99R106SQ/NOPB	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1		CMOS			GENERAL PURPOSE	95 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	3-STATE	0 Cel	1	MATTE TIN	QUAD	S-XQCC-N48	2	.8 mm	7 mm	Not Qualified		TRUE	1		YES	e3	30	260	7 mm		0 ns
TSER953RHBR	Texas Instruments	LINE DRIVER	OTHER	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	4						225 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20			.00002 Amp	1.71 V	.5 mm	85 Cel			-20 Cel	4	MATTE TIN	QUAD	S-PQCC-N32	3	1 mm	5 mm						YES	e3	30	260	5 mm	2.68 V
LM4308GRX/NOPB	Texas Instruments		INDUSTRIAL	BALL	49	FBGA	SQUARE	PLASTIC/EPOXY	YES								18 mA				1.8,1.8/3		GRID ARRAY, FINE PITCH	BGA49,7X7,20		Line Driver or Receivers			.5 mm	85 Cel			-40 Cel		TIN SILVER COPPER	BOTTOM	S-PBGA-B49	1			Not Qualified						e1	40	260
TSB41BA3DIPFP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	80	HQCCN	SQUARE	PLASTIC/EPOXY	YES	2 V	2					IEEE 1394B	150 mA	DIFFERENTIAL	1.85 V	3.6 V	1.8,3.3		CHIP CARRIER, HEAT SINK/SLUG	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.75 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	2		YES	e4	30	260	12 mm	.172 V	0 ns
TSB14C01PM	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES		1												FLATPACK, LOW PROFILE, FINE PITCH						.5 mm							QUAD	S-PQFP-G64		1.6 mm	10 mm	Not Qualified							NOT SPECIFIED	NOT SPECIFIED	10 mm
SN55122FK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.25 V	1		BIPOLAR			GENERAL PURPOSE	100 mA	SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers		4.75 V	1.27 mm	125 Cel		TOTEM-POLE	-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	16 Amp	TRUE	3				NOT SPECIFIED	NOT SPECIFIED	8.89 mm		30 ns
DS92LV3242TVSX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES		4						265 mA		3.3 V	3.465 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3.135 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified		TRUE	4		YES	e3	30	260	10 mm		0 ns
SN55108BFK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V		+-5	-5 V	CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel		OPEN-COLLECTOR	-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO		NOT SPECIFIED	NOT SPECIFIED	8.89 mm		25 ns
ADS58C28IRGCT	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.9 V	2		CMOS			GENERAL PURPOSE	163 mA	DIFFERENTIAL	1.8 V	1.9 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.75 V		.00001 Amp	1.7 V	.5 mm	85 Cel	1.8 V		-40 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm	9 mm	Not Qualified		TRUE	2			e4	30	260	9 mm		0 ns
SNJ55188FK	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	15 V	4		BIPOLAR	MIL-PRF-38535	350 ns	EIA-232-E; TIA-232-E; V.28	34 mA	GATED	9 V	15 V	+-9	-9 V	CHIP CARRIER	LCC20,.35SQ	7.5 V	Line Driver or Receivers	.00001 Amp	7.5 V	1.27 mm	125 Cel	9 V	TOTEM-POLE	-55 Cel	4	Tin/Lead (Sn/Pb)	QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER	NO	e0	NOT SPECIFIED	NOT SPECIFIED	8.89 mm	12 V	0 ns
DS99R421QSQX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3			AEC-Q100		ISO 10605	130 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC36,.25SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified		TRUE	3		NO	e3	30	260	6 mm		0 ns
SN55107BFK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V		+-5	-5 V	CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel		TOTEM-POLE	-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO		NOT SPECIFIED	NOT SPECIFIED	8.89 mm		25 ns
TSB14C01AMHVR	Texas Instruments	LINE TRANSCEIVER	MILITARY	FLAT	68	QFF	SQUARE	CERAMIC, GLASS-SEALED	YES	5.25 V	2		CMOS			IEEE 1394		STANDARD	5 V				FLATPACK					4.5 V	.635 mm	125 Cel			-55 Cel	2		QUAD	S-GQFP-F68		3.912 mm	12.51 mm	Not Qualified			2		NO				12.51 mm		0 ns
TSB41AB2PAPG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	4	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified	9 Amp	COMPLEMENTARY	4		YES	e4	30	260	10 mm	.172 V	0 ns
SNJ55113FKR	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR	MIL-PRF-38535	20 ns	GENERAL PURPOSE	65 mA	GATED	5 V				CHIP CARRIER					4.5 V	1.27 mm	125 Cel			-55 Cel	2		QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified		COMPLEMENTARY		1 SINGLE INPUT DRIVER	YES				8.89 mm
SNJ55107BFK	Texas Instruments		MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES				BIPOLAR	38535Q/M;38534H;883B					5 V		+-5	-5 V	CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers			1.27 mm	125 Cel			-55 Cel			QUAD	S-XQCC-N20				Not Qualified	16 Amp										25 ns
DS99R106VSX	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			GENERAL PURPOSE		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			0 Cel	1	TIN LEAD	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			1		YES	e0			7 mm
SCAN12100TYA/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	100	QFP	SQUARE	PLASTIC/EPOXY	YES												1.8,3.3		FLATPACK	TQFP100,.63SQ		Line Driver or Receivers			.5 mm	85 Cel			-40 Cel		MATTE TIN	QUAD	S-PQFP-G100	3			Not Qualified						e3	30	260			0 ns
TSB41AB1GQE	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	BALL	80	VFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS			IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3/3.3		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA80,9X9,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	2	TIN LEAD	BOTTOM	S-PBGA-B80	2A	1 mm	5 mm	Not Qualified		COMPLEMENTARY	2		YES	e0	20	235	5 mm	.172 V	0 ns
TSER953RHBT	Texas Instruments	LINE DRIVER	OTHER	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	4						225 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20			.00002 Amp	1.71 V	.5 mm	85 Cel			-20 Cel	4	MATTE TIN	QUAD	S-PQCC-N32	3	1 mm	5 mm						YES	e3	30	260	5 mm	2.68 V
SCAN921226HSM	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	BALL	49	LFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			IEEE 1149.1	120 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		GRID ARRAY, LOW PROFILE, FINE PITCH	BGA49,7X7,32	3 V	Line Driver or Receivers		3 V	.8 mm	125 Cel	3.3 V	3-STATE	-40 Cel		TIN LEAD	BOTTOM	S-PBGA-B49	3	1.5 mm	7 mm	Not Qualified		TRUE	1		NO	e0	20	235	7 mm		0 ns
THS7102TVFP	Texas Instruments	LINE TRANSCEIVER		GULL WING	32	HLQFP	SQUARE	PLASTIC/EPOXY	YES	16 V	1					GENERAL PURPOSE		DIFFERENTIAL	15 V				FLATPACK, HEAT SINK/SLUG, LOW PROFILE					7.5 V	.8 mm					1		QUAD	S-PQFP-G32		1.6 mm	7 mm	Not Qualified			1		YES				7 mm		0 ns
DS99R106SQX/NOPB	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1		CMOS				95 mA		3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Line Driver or Receivers			.5 mm	70 Cel	3.3 V	3-STATE	0 Cel		MATTE TIN	QUAD	S-PQCC-N48	2	.8 mm	7 mm	Not Qualified		TRUE	1		NO	e3	30	260	7 mm		0 ns
TSB41AB2IPAP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	64	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4					IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP64,.47SQ		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	4		QUAD	S-PQFP-G64		1.2 mm	10 mm	Not Qualified	9 Amp		4		YES		NOT SPECIFIED	NOT SPECIFIED	10 mm	.172 V	0 ns
DS7832FKB	Texas Instruments		MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES				BIPOLAR	38535Q/M;38534H;883B	25 ns				5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers	.00004 Amp		1.27 mm	125 Cel		3-STATE	-55 Cel	2		QUAD	S-XQCC-N20				Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED		2 V	0 ns
DS7831FKB	Texas Instruments		MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES				BIPOLAR	38535Q/M;38534H;883B	25 ns				5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers	.00004 Amp		1.27 mm	125 Cel		3-STATE	-55 Cel	2		QUAD	S-XQCC-N20				Not Qualified					YES					2 V
LMH0341SQX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	6					GENERAL PURPOSE		STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel		TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm	7 mm	Not Qualified			6		NO	e0	30	235	7 mm
DS90UB904QSQ	Texas Instruments	LINE RECEIVER		NO LEAD	48		SQUARE	UNSPECIFIED	YES														CHIP CARRIER													QUAD	S-XQCC-N48				Not Qualified
LMH0002SQ	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.465 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25		Line Driver or Receivers		3.135 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-PQCC-N16	1	.8 mm	4 mm	Not Qualified					YES	e0		260	4 mm	.75 V	0 ns
LMH0071SQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	1					GENERAL PURPOSE	127 mA	DIFFERENTIAL	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel		MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm			COMPLEMENTARY	5		YES	e3	30	260	7 mm		0 ns
DS90UB903QSQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1			AEC-Q100		GENERAL PURPOSE	90 mA	STANDARD	1.8 V	1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm	6 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	6 mm		0 ns
DS90C124QVS	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	105 Cel			-40 Cel		TIN LEAD	QUAD	S-PQFP-G48	1	1.2 mm	7 mm				24		NO	e0	30	235	7 mm
5962-9163901Q2X	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BICMOS	MIL-PRF-38535 Class Q	12 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V	5.5 V			CHIP CARRIER		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	4		QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Qualified					YES				8.89 mm
DS90UB903QSQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1			AEC-Q100		GENERAL PURPOSE	90 mA	STANDARD	1.8 V	1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm	6 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	6 mm		0 ns
LMH0070SQ	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	5					GENERAL PURPOSE		STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	5	TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm	7 mm	Not Qualified					NO	e0	30	235	7 mm
SN75LVCP601RTJT	Texas Instruments	LINE DRIVER	OTHER	NO LEAD	20	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2	2			.4 ns	GENERAL PURPOSE	80 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			CHIP CARRIER	LCC20,.16SQ,20	3 V		.00003 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N20	2	.8 mm	4 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	4 mm		0 ns
DS90UR916QSQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	60	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			110 mA			1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC60,.35SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N60	3	.8 mm	9 mm	Not Qualified			1		YES	e3	30	260	9 mm		0 ns
5962-9164001M2X	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		CMOS	MIL-STD-883		EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V			CHIP CARRIER		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel			QUAD	S-CQCC-N20		1.905 mm	8.89 mm	Qualified			4						8.89 mm		35 ns
SN65LVDS307ZQCT	Texas Instruments	LINE DRIVER	INDUSTRIAL	BALL	48	VFBGA	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1		CMOS			GENERAL PURPOSE	25.8 mA	STANDARD	1.8 V		1.8		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA48,7X7,20		Line Driver or Receivers		1.65 V	.5 mm	85 Cel			-40 Cel	2	TIN SILVER COPPER	BOTTOM	S-PBGA-B48	3	1 mm	4 mm	Not Qualified					YES	e1	30	260	4 mm		0 ns
DS90C124IVSX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	105 Cel			-40 Cel		TIN LEAD	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			24		NO	e0			7 mm
SN65LBC180RSATG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1		BICMOS		18 ns	EIA-485; ISO 8482	4 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	.65 mm	85 Cel	5 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N16	2	1 mm	4 mm	Not Qualified	8 Amp	TRUE	1	TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e4	NOT SPECIFIED	260	4 mm	1.1 V	33 ns
THS6022CGQER	Texas Instruments	LINE DRIVER	COMMERCIAL	BALL	80	VFBGA	SQUARE	PLASTIC/EPOXY	YES	16 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	15 V			-15 V	GRID ARRAY, VERY THIN PROFILE, FINE PITCH					4.5 V	.5 mm	70 Cel			0 Cel	2	TIN LEAD	BOTTOM	S-PBGA-B80	2A	1 mm	5 mm	Not Qualified				ALSO OPERATES AT 9V TO 32V SINGLE SUPPLY	NO	e0			5 mm		0 ns
LMH0040SQX	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	5					GENERAL PURPOSE		STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	5	TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm	7 mm	Not Qualified					NO	e0	30	235	7 mm
DS10BR254TSQ/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		6								3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	3 V	Line Driver or Receivers	.00001 Amp		.5 mm	85 Cel	3.3 V		-40 Cel	4	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm	6 mm	Not Qualified		TRUE	2		NO	e3	30	260	6 mm		0 ns
SN75C3238ECRHBR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	32	VQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	3		BIPOLAR			EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V		3.3/5		CHIP CARRIER, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers	.000001 Amp	3 V	.5 mm	70 Cel			0 Cel	5		QUAD	S-PQCC-N32		1 mm	5 mm	Not Qualified	1.6 Amp		3	ALSO OPERATES AT 5V SUPPLY	NO				5 mm	10 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.