SQUARE Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
DS15BR401TVSX	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1				2 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	4	TIN LEAD	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			4		YES	e0		260	7 mm		2 ns
DS90UH926QSQE	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	60	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1		CMOS						3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	105 Cel			-40 Cel	1		QUAD	S-PQCC-N60		.8 mm	9 mm				1		YES				9 mm
DS25BR204TSQ/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	3.6 V	2				.6 ns		185 mA		3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm	6 mm	Not Qualified		COMPLEMENTARY	2		YES	e3	30	260	6 mm		.6 ns
DS15BR400TSQ	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE		UNSPECIFIED	YES	3.6 V	1				2 ns	GENERAL PURPOSE	215 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	TIN LEAD	QUAD	S-XQCC-N32	3	.8 mm	5 mm	Not Qualified		COMPLEMENTARY	4		YES	e0		260	5 mm	2 V	2 ns
5962-7802302M2A	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-STD-883	25 ns	EIA-422; FED STD 1020	40 mA	STANDARD	5 V	5.5 V			CHIP CARRIER		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	4		QUAD	S-CQCC-N20	1	1.91 mm	8.89 mm	Qualified					YES				8.89 mm
SN75LVDT1422PAGG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	TFQFP	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-644; TIA-644	49 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	-10 Cel	14	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified		INVERTED	14		YES	e4	30	260	10 mm		0 ns
SN65LVDS9638IDGNR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	HTSSOP	SQUARE		PLASTIC/EPOXY	YES		2					EIA-422; EIA-485		DIFFERENTIAL	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH						.65 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G8		1.07 mm	3 mm	Not Qualified			1		YES				3 mm
SN74AVCA406LZQSR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	BALL	24	VFBGA	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1		CMOS		6 ns	GENERAL PURPOSE	.02 mA	STANDARD	1.8 V	3.6 V	3.3		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA24,5X5,20	1.2 V	Other Interface ICs		1.2 V	.5 mm	85 Cel	1.8 V	3-STATE	-40 Cel	1	TIN SILVER COPPER	BOTTOM	S-PBGA-B24	1	1 mm	3 mm	Not Qualified	.08 Amp	TRUE	1		NO	e1	30	260	3 mm		6 ns
DS25MB100TSQX	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE		UNSPECIFIED	YES	3.465 V	2				1 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3.135 V	.5 mm	85 Cel			-40 Cel	2	TIN	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified			2		YES	e3			6 mm		1 ns
SN65LVDS101DGKG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1		BIPOLAR		.9 ns	EIA-644-A; TIA-644-A	61 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers		3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified		COMPLEMENTARY	1		YES	e4	30	260	3 mm		.9 ns
5962-87547012A	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR	MIL-PRF-38535	15 ns	V.35	35 mA	GATED	5 V	5.5 V	+-5	-5 V	CHIP CARRIER	LCC20,.35SQ	4.5 V	Line Driver or Receivers	.00004 Amp	4.5 V	1.27 mm	125 Cel	5 V	CONSTANT-CURRENT	-55 Cel	2	Tin/Lead (Sn/Pb)	QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Qualified		COMPLEMENTARY		HIGH DRIVE	YES	e0	NOT SPECIFIED	NOT SPECIFIED	8.89 mm	2 V	0 ns
DS90UR916QSQX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	60	HVQCCN	SQUARE		PLASTIC/EPOXY	YES		1			AEC-Q100			110 mA			1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC60,.35SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	DIFFERENTIAL	-40 Cel		MATTE TIN	QUAD	S-PQCC-N60	3	.8 mm	9 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	9 mm		0 ns
DS36954V	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	5.25 V	4				19 ns	EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				CHIP CARRIER					4.75 V	1.27 mm	70 Cel			0 Cel	4		QUAD	S-PQCC-J20		4.57 mm	8.89 mm				4		YES				8.89 mm		19 ns
5962-9076601M2X	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-STD-883		EIA-422-A; EIA-423-A; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V			CHIP CARRIER		4.75 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel			QUAD	S-CQCC-N20		1.905 mm	8.89 mm	Qualified			4						8.89 mm		30 ns
THS6012IGQE	Texas Instruments	LINE DRIVER	INDUSTRIAL	BALL	80	VFBGA	SQUARE		PLASTIC/EPOXY	YES	16 V	2					GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	GRID ARRAY, VERY THIN PROFILE, FINE PITCH					4.5 V	.5 mm	85 Cel			-40 Cel	2		BOTTOM	S-PBGA-B80		1 mm	5 mm	Not Qualified				9V TO 32V SINGLE SUPPLY OPERATION ALSO POSSIBLE	NO				5 mm		0 ns
SN65LVDS314RSKT	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	QCCN	SQUARE		PLASTIC/EPOXY	YES								102.3 mA				1.8,1.8/3.3		CHIP CARRIER	LCC64,.32SQ,16		Line Driver or Receivers			.4 mm	85 Cel			-40 Cel			QUAD	S-PQCC-N64				Not Qualified											0 ns
5962-88649012X	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR	MIL-PRF-38535		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	5 V				CHIP CARRIER					4.5 V		125 Cel			-55 Cel			QUAD	S-CQCC-N20				Not Qualified			4		NO						35 ns
DS100RT410SQE/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	2.625 V	4	4				GENERAL PURPOSE		DIFFERENTIAL	2.5 V	2.625 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.375 V		.00004 Amp	2.375 V	.5 mm	85 Cel	2.5 V		-40 Cel	4	MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm				4		YES	e3	30	260	7 mm		0 ns
DS90C2501SLB	Texas Instruments	LINE DRIVER	COMMERCIAL	NO LEAD	128	QCCN	SQUARE		UNSPECIFIED	YES	2.75 V	2		CMOS			EIA-644; TIA-644		STANDARD	2.5 V	3.6 V	2.5,3.3		CHIP CARRIER	LGA128,20X20,20	3 V	Line Driver or Receivers		2.25 V	1 mm	70 Cel	3.3 V		0 Cel	2		QUAD	S-XQCC-N128	4	1.1 mm	10 mm	Not Qualified					NO				10 mm		0 ns
DS90UB904QSQE	Texas Instruments	LINE RECEIVER		NO LEAD	48		SQUARE		UNSPECIFIED	YES														CHIP CARRIER													QUAD	S-XQCC-N48				Not Qualified
5962-88648012A	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-STD-883	22 ns	GENERAL PURPOSE		STANDARD	5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	125 Cel		3-STATE	-55 Cel	1	TIN LEAD	QUAD	S-CQCC-N20				Not Qualified					YES	e0				2 V	0 ns
DS90UR905QSQ	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		UNSPECIFIED	YES	1.89 V	1			AEC-Q100		I2C		DIFFERENTIAL	1.8 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					1.71 V	.5 mm	105 Cel			-40 Cel	1		QUAD	S-XQCC-N48		.8 mm	7 mm	Not Qualified			1		YES				7 mm
DS90UH927QSQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE		PLASTIC/EPOXY	YES		1			AEC-Q100			160 mA		3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	3 V	Line Driver or Receivers			.5 mm	105 Cel	3.3 V		-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm	6 mm	Not Qualified					NO	e3	30	260	6 mm		0 ns
SN65MLVD204BRUMT	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	16	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1				3.5 ns	EIA-899; TIA-899	24 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25			.00001 Amp	3 V	.65 mm	125 Cel		DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N16	1	.8 mm	4 mm		8 Amp	COMPLEMENTARY	1	ESD Value for A, B Pins is 3B	YES	e4	30	260	4 mm	.48 V	10 ns
DS90CR483AVJDX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE		PLASTIC/EPOXY	YES		4				100 ns		210 mA		3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ	3 V	Line Driver or Receivers	.00001 Amp		.5 mm	70 Cel	3.3 V	3-STATE	-10 Cel	8	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified		COMPLEMENTARY	8		YES	e4	30	260	14 mm	2.7 V	0 ns
DS36950VX	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR		19 ns	EIA-485	90 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC20,.4SQ		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	4	TIN LEAD	QUAD	S-PQCC-J20	2A	4.57 mm	8.89 mm	Not Qualified	4 Amp		4	COMMON I/O; 4 RECEIVERS ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVERS; INDIVIDUAL DRIVER ENABLES	YES	e0		250	8.89 mm	1.5 V	19 ns
5962-9690301Q2A	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR	MIL-STD-883 Class Q		GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V	5.5 V	+-5	-5 V	CHIP CARRIER	LCC20,.35SQ	4.5 V	Line Driver or Receivers	75 Amp	4.5 V	1.27 mm	125 Cel	5 V		-55 Cel		Tin/Lead (Sn/Pb)	QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Qualified	16 Amp		2	ADDITIONAL COMMON STROBE INPUT	NO	e0	NOT SPECIFIED	NOT SPECIFIED	8.89 mm		25 ns
SN65LVDS9637DGKG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE		PLASTIC/EPOXY	YES	3.6 V	2		CMOS			EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified	8 Amp	TRUE	2		NO	e4	NOT SPECIFIED	260	3 mm		3 ns
5962F7802301Q2A	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	300k Rad(Si)	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4			MIL-PRF-38535 Class Q	30 ns	EIA-422; FED STD 1020		STANDARD	5 V				CHIP CARRIER					4.5 V	1.27 mm	125 Cel			-55 Cel	4		QUAD	S-CQCC-N20		1.91 mm	8.89 mm	Not Qualified					YES				8.89 mm
DS90C241QVS	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100		GENERAL PURPOSE		STANDARD	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	105 Cel			-40 Cel	24	TIN LEAD	QUAD	S-PQFP-G48	1	1.2 mm	7 mm						YES	e0	30	235	7 mm
LMH0041SQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		UNSPECIFIED	YES	2.625 V	1					GENERAL PURPOSE	127 mA	DIFFERENTIAL	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm			TRUE	5		YES	e3	30	260	7 mm		0 ns
LMH0341SQ/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		UNSPECIFIED	YES	2.625 V	1					GENERAL PURPOSE	127 mA	DIFFERENTIAL	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V	OPEN-COLLECTOR	-40 Cel		MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm			TRUE	5		YES	e3	30	260	7 mm	2.7 V	0 ns
DS26F32ME/883	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-STD-883		EIA-422; EIA-423; FED STD 1020; FED STD 1030	50 mA	DIFFERENTIAL	5 V	5.5 V	5		CHIP CARRIER	LCC20,.35SQ	4.5 V	Line Driver or Receivers	.00005 Amp	4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel			QUAD	S-CQCC-N20	1	1.91 mm	8.89 mm	Not Qualified	8 Amp	TRUE	4		NO				8.89 mm		31 ns
SN75186FNR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE		PLASTIC/EPOXY	YES	5.5 V	4		BIPOLAR		5000 ns	EIA-232-E; TIA-232-E; V.28		SCHMITT TRIGGER	5 V	13.2 V	5,+-12	-12 V	CHIP CARRIER	LDCC28,.5SQ	10.8 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	70 Cel	12 V		0 Cel	4		QUAD	S-PQCC-J28		4.57 mm	11.505 mm	Not Qualified	4 Amp		4	LOOP BACK	NO		NOT SPECIFIED	NOT SPECIFIED	11.505 mm	14 V	6000 ns
DS90CR486VSX	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE		PLASTIC/EPOXY	YES	3.46 V	8		CMOS			EIA-644; TIA-644	340 mA	DIFFERENTIAL	3.3 V		3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ		Line Driver or Receivers		3.14 V	.5 mm	70 Cel			-10 Cel		TIN LEAD	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified			9		NO	e0		260	14 mm		0 ns
DS100RT410SQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	2.625 V	4	4				GENERAL PURPOSE		DIFFERENTIAL	2.5 V	2.625 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.375 V		.00004 Amp	2.375 V	.5 mm	85 Cel	2.5 V		-40 Cel	4	MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm				4		YES	e3	30	260	7 mm		0 ns
DS10BR254TSQ	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE		UNSPECIFIED	YES	3.6 V	1				.65 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	2		QUAD	S-XQCC-N40		.8 mm	6 mm	Not Qualified			2		YES				6 mm		.65 ns
DS90UR241QVS	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100		ISO 10605		STANDARD	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	105 Cel			-40 Cel	24	TIN LEAD	QUAD	S-PQFP-G48	1	1.2 mm	7 mm						YES	e0	30	235	7 mm
DS25MB200TSQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		UNSPECIFIED	YES	3.465 V	2				2 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V	3.465 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3.135 V	Line Driver or Receivers	.00001 Amp	3.135 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified		COMPLEMENTARY	2		YES	e3	30	260	7 mm		2 ns
DS90UH926QSQ	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	60	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1		CMOS	AEC-Q100			145 mA		3.3 V		1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC60,.35SQ,20		Line Driver or Receivers		3 V	.5 mm	105 Cel			-40 Cel	1		QUAD	S-PQCC-N60		.8 mm	9 mm	Not Qualified			1		YES		NOT SPECIFIED	NOT SPECIFIED	9 mm		0 ns
V62/07612-01XE	Texas Instruments	LINE TRANSCEIVER	MILITARY	GULL WING	8	TSSOP	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1				4.5 ns	EIA-644; TIA-644		STANDARD	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	125 Cel			-55 Cel	1		DUAL	S-PDSO-G8		1.1 mm	3 mm	Not Qualified			1		YES				3 mm		4.5 ns
5962-9318301Q2X	Texas Instruments	LINE TRANSCEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.25 V	1		BICMOS	MIL-PRF-38535 Class Q	31 ns	EIA-485; ISO 8482		DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V			CHIP CARRIER		4.75 V			4.75 V	1.27 mm	125 Cel	5 V		-55 Cel	1		QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Qualified			1		YES				8.89 mm		37 ns
DS90UB962WRTDRQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	1.89 V	4			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		NICKEL PALLADIUM GOLD SILVER	QUAD	S-PQCC-N64	3	.9 mm	9 mm				4	ALSO HAS SUPPLY VOLTAGE RANGING FROM 1.045 TO 1.155V	NO	e4	30	260	9 mm
MC3453FK	Texas Instruments	LINE DRIVER	COMMERCIAL	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.25 V	4				15 ns	GENERAL PURPOSE		STANDARD	5 V			-5 V	CHIP CARRIER					4.5 V	1.27 mm	70 Cel			0 Cel	4		QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified					YES				8.89 mm		0 ns
DS36954VX	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	J BEND	20	QCCJ	SQUARE		PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		19 ns	EIA-485	90 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC20,.4SQ		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	4	TIN LEAD	QUAD	S-PQCC-J20	2A	4.57 mm	8.89 mm	Not Qualified	4 Amp		4	COMMON I/O; 4 RECEIVERS ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVERS; INDIVIDUAL DRIVER ENABLES	YES	e0		250	8.89 mm	1.5 V	19 ns
SN65LVDS305ZQER	Texas Instruments	LINE DRIVER	INDUSTRIAL	BALL	80	VFBGA	SQUARE		PLASTIC/EPOXY	YES	1.95 V	1		CMOS			GENERAL PURPOSE	18.8 mA	STANDARD	1.8 V	1.95 V	1.8		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA80,9X9,20	1.65 V	Line Driver or Receivers	.00002 Amp	1.65 V	.5 mm	85 Cel	1.8 V	DIFFERENTIAL	-40 Cel	1	TIN SILVER COPPER	BOTTOM	S-PBGA-B80	3	1 mm	5 mm	Not Qualified		COMPLEMENTARY	2		YES	e1	30	260	5 mm		0 ns
DS110RT410SQE/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	2.625 V	4	4				GENERAL PURPOSE		DIFFERENTIAL	2.5 V	2.625 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		2.375 V			2.375 V	.5 mm	85 Cel	2.5 V		-40 Cel	4	MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm				4		YES	e3	30	260	7 mm	2 V	0 ns
5962-9762201Q2A	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	HQCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	3.6 V	4		CMOS	MIL-PRF-38535 Class Q		EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG	LCC20,.35SQ	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	125 Cel	3.3 V	TOTEM-POLE	-55 Cel		TIN LEAD	QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Qualified	8 Amp	TRUE	4		NO	e0			8.89 mm		6.1 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.