INDUSTRIAL Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
LTC485IN8#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		CMOS		50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	85 Cel		3-STATE	-40 Cel	1	MATTE TIN	DUAL	R-PDIP-T8	1	3.937 mm	7.62 mm	Not Qualified		COMPLEMENTARY	1	COMMON I/O; TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e3	30	260			200 ns
ADA4927-1YCPZ-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	11 V	1		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL					CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	105 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	3	1 mm	3 mm	Not Qualified					YES	e3		260	3 mm		0 ns
LTC2855IDE#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	12	HVSON	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				50 ns	EIA-485-A; TIA-485-A		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-N12	1	.8 mm	3 mm	Not Qualified			1		YES	e3	30	260	4 mm		70 ns
MAX3232IDBRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2					EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	5.5 V	3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	4.5 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	5 V		-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	.001 Amp	INVERTED	2	CAN ALSO OPERATE WITH 5V SUPPLY	NO	e4	30	260	6.2 mm	10 V	0 ns
ISL83072EIUZA-T	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		BICMOS			EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	2	1.1 mm	3 mm				1		YES	e3	30	260	3 mm		120 ns
LTM2881IV-3#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	LGA	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				85 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			GRID ARRAY		3 V			1.62 V	1.27 mm	85 Cel	3.3 V		-40 Cel	1	GOLD	BOTTOM	R-PBGA-N32	3	2.95 mm	11.25 mm	Not Qualified			1		YES	e4	30	245	15 mm		140 ns
MAX3232IDWG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2					EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	5.5 V	3.3/5		SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	85 Cel	5 V		-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	2	CAN ALSO OPERATE WITH 5V SUPPLY	NO	e4	30	260	10.3 mm	10 V	0 ns
SN65MLVD206DR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		2.4 ns	EIA-899; TIA-899	24 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4.9 mm	.48 V	6 ns
ISL3172EIBZ	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BICMOS			EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	3	1.75 mm	3.9 mm				1		YES	e3	30	260	4.9 mm
MAX3490EESA-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		35 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	2.5 Amp		1		YES	e0			4.9 mm	1.5 V	0 ns
MAX3490EESA+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		35 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	2.5 Amp		1		YES	e3	30	260	4.9 mm	1.5 V	0 ns
DS2480B/T&R	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1					EIA-232-C		STANDARD	5 V				SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified					NO	e0			4.9 mm		0 ns
DS2480B+T&R	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1					EIA-232-C		STANDARD	5 V				SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified					NO	e3	30	260	4.9 mm		0 ns
LTM2882IY-3#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	BALL	32	BGA	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		CMOS		500 ns	EIA-232-F; TIA-232-F		SCHMITT TRIGGER	3.3 V				GRID ARRAY					1.62 V	1.27 mm	85 Cel			-40 Cel	2	TIN SILVER COPPER	BOTTOM	R-PBGA-B32	3	3.62 mm	11.25 mm	Not Qualified			2		NO	e1	30	245	15 mm		400 ns
HI-8585PSI	Holt Integrated Circuits	LINE DRIVER	INDUSTRIAL	GULL WING	8	LSOP	RECTANGULAR	PLASTIC/EPOXY	YES	16.5 V	1		CMOS			ARINC 429		STANDARD	15 V		+-12/+-15	-15 V	SMALL OUTLINE, LOW PROFILE	SOP8,.25		Line Driver or Receivers		11.4 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.626 mm	3.9 mm	Not Qualified				CAN ALSO OPERATE WITH A +/-15V SUPPLY	NO	e0		260	4.92 mm	9 V	0 ns
SN65HVD3080EDGSR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS		1300 ns	EIA-485-A; TIA-485-A; EIA-422	.75 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	.5 mm	85 Cel	5 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-G10	2	1.1 mm	3 mm	Not Qualified	.1 Amp		1		YES	e4	NOT SPECIFIED	260	3 mm	1.5 V	100 ns
MAX232IN	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2		BICMOS			EIA-232-F; TIA-232-F; V.28	10 mA	SCHMITT TRIGGER	5 V	5.5 V	5		IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers		4.5 V	2.54 mm	85 Cel	5 V	TOTEM-POLE	-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	3.2 Amp	INVERTED	2	EXTERNAL CHARGE PUMP	NO	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	10 V	0 ns
SP3232EBEY-L/TR	Exar	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2					EIA-232-F; TIA-232-F; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp		2		NO	e3		260	5 mm	10 V	0 ns
SN65HVD10DG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BICMOS		16 ns	EIA-485-A; TIA-485-A; ISO 8482	15.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.0001 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	1	SIGNALING RATE 32 MBPS	YES	e4	NOT SPECIFIED	260	4.9 mm	1.5 V	25 ns
LTC1480IS8#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		80 ns	EIA-422; EIA-485	.6 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.752 mm	3.899 mm	Not Qualified		COMPLEMENTARY	1	COMMON I/O; TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e3	30	260	4.9025 mm		200 ns
MAX3483EESA	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		1500 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	2.5 Amp		1		YES	e0	20	240	4.9 mm	1.5 V	120 ns
MAX3483EESA+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		1500 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	2.5 Amp		1		YES	e3	30	260	4.9 mm	1.5 V	120 ns
ISL3178EIUZ-T	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		BICMOS			EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	2	1.1 mm	3 mm				1		YES	e3	30	260	3 mm
SN65C3232EDRE4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2				300 ns	EIA-232	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	1.6 Amp		2	ALSO OPERATES WITH 5V SUPPLY	NO	e4	30	260	9.9 mm	10 V	300 ns
ISOW1412DFM	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	HSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1					EIA-422; EIA-485		STANDARD					SMALL OUTLINE, HEAT SINK/SLUG	SOP20,.4				1.71 V	1.27 mm	105 Cel			-40 Cel	1		DUAL	R-PDSO-G20		3.55 mm	7.5 mm			TRUE	1		YES				12.83 mm
LT1785AIS8#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR		2000 ns	EIA-422; EIA-485	9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE	SOP8,.25				4.75 V	1.27 mm	85 Cel		DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	1.6 Amp		1		YES	e3	30	260	4.9 mm	1.2 V	900 ns
SN65LBC174A16DWR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS		11 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	23 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.4	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified					YES	e4	30	260	10.3 mm	1 V	0 ns
AD8138ARZ-R7	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	SMALL OUTLINE					1.4 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified					YES	e3	30	260	4.9 mm		0 ns
ISL3232EIRZ-T	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.5 V	2		CMOS			EIA-232; TIA-232; V.24; V.28		SCHMITT TRIGGER	3.15 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.8 mm	85 Cel			-40 Cel	2	MATTE TIN	QUAD	S-PQCC-N16	2	1 mm	5 mm				2		NO	e3	30	260	5 mm
MAX3232IDG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2				300 ns	EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	85 Cel	3.3 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	1.6 Amp	INVERTED	2	CAN ALSO OPERATE WITH 5V SUPPLY	NO	e4	NOT SPECIFIED	260	9.9 mm	10 V	300 ns
SN65LVDS179DGKR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		BIPOLAR		2.7 ns	EIA-644; TIA-644	12 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified	.02 Amp		1		YES	e4	30	260	3 mm	.247 V	4.5 ns
PCA9515ADP/DG,118	NXP Semiconductors	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		130 ns	I2C			3.3 V		2.5/3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified			2			e4	30	260	3 mm		190 ns
DS90LV032ATMTCX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644	.02 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers		3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel		MATTE TIN	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	2 Amp	TRUE	4		NO	e3	30	260	5 mm	.25 V	3.3 ns
TRS3122ERGER	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2 V	2					EIA-232; TIA-232		SCHMITT TRIGGER	1.8 V	5.5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		4.5 V			1.65 V	.5 mm	85 Cel	5 V		-40 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24	1	1 mm	4 mm				2	ALSO OPERATES FROM 3 TO 3.6V AND 4.5 TO 5.5V	NO	e4	30	260	4 mm		400 ns
AD8138ARZ-RL	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	SMALL OUTLINE					1.4 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified					YES	e3	40	260	4.9 mm		0 ns
MAX232IDRE4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		BICMOS			EIA-232-F; TIA-232-F; V.28	10 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	3.2 Amp		2	EXTERNAL CHARGE PUMP	NO	e4	30	260	9.9 mm	10 V	0 ns
DS89C21TM/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS		10 ns	V.11; EIA-422-A; TIA-422-A	6 mA	SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	6 Amp	COMPLEMENTARY	1		YES	e3	30	260	4.9 mm	2 V	30 ns
LT1791AIS#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR		2000 ns	EIA-422; EIA-485	9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE	SOP14,.25				4.75 V	1.27 mm	85 Cel		DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	1.6 Amp		1		YES	e3	30	260	8.65 mm	1.2 V	900 ns
ADM1485ARZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BICMOS		15 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000001 Amp	4.75 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		1	THERMAL SHUTDOWN PROTECTION	YES	e3	30	260	4.9 mm	1.5 V	30 ns
SN65HVD08DRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS		40 ns	EIA-485-A; TIA-485-A; ISO 8482E	16 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	3.3/5		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.0001 Amp	3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	1		YES	e4	NOT SPECIFIED	260	4.9 mm	1.5 V	70 ns
SN65HVD82DR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1				1000 ns		.9 mA		5 V	5.5 V	5		SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers			1.27 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.91 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	4.9 mm	1.5 V	195 ns
SN65LBC184DRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR		1300 ns	EIA-485; TIA-485; ISO 8482	25 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.00005 Amp	4.75 V	1.27 mm	85 Cel	5 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	.05 Amp	COMPLEMENTARY	1		YES	e4	30	260	4.9 mm	1.5 V	300 ns
DS90UB953TRHBTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1			AEC-Q100		GENERAL PURPOSE		STANDARD	1.8 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N32	3	1 mm	5 mm						YES	e4	30	260	5 mm
LTC2870IFE#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		CMOS		70 ns	EIA-232; EIA-422; EIA-485	.005 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	3 V			1.7 V	.65 mm	85 Cel	3.3 V		-40 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	3 Amp		2		YES	e3	30	260	9.7 mm	1.5 V	200 ns
MAX3362EKA#TG16	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	1		BICMOS		50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.1		Line Driver or Receivers		3.135 V	.65 mm	85 Cel			-40 Cel	1	Matte Tin (Sn)	DUAL	R-PDSO-G8	1	1.45 mm	1.625 mm	Not Qualified	1 Amp		1		YES	e3	30	245	2.9 mm	1.5 V	50 ns
DRV134PA	Texas Instruments	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	36 V	1	1				GENERAL PURPOSE		STANDARD	18 V	18 V	+-18	-18 V	IN-LINE	DIP8,.3	4.5 V	Line Driver or Receivers	.001 Amp	9 V	2.54 mm	125 Cel	18 V		-55 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	1 Amp	COMPLEMENTARY			YES	e4			9.81 mm	20 V	0 ns
AM26LV31EIPWR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4				12 ns	EIA-422-B; TIA-422-B; V.11	.1 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers		3 V	.65 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	30 Amp	TRUE		BUILT-IN DRIVER OUTPUT SHORT CIRCUIT PROTECTION	YES	e4	30	260	5 mm	2 V	0 ns
DS90LV804TSQX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.45 V	4		CMOS		3.2 ns	GENERAL PURPOSE	140 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.45 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	3.15 V	Line Driver or Receivers	.00001 Amp	3.15 V	.5 mm	85 Cel		DIFFERENTIAL	-40 Cel	4	MATTE TIN	QUAD	S-PQCC-N32	3	.8 mm	5 mm	Not Qualified		COMPLEMENTARY	4		YES	e3	30	260	5 mm	.25 V	3.2 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.