INDUSTRIAL Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SP335EER1-L	Exar	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	2			1000 ns	EIA-232; V.28		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N32		1 mm	5 mm				2	IT ALSO SUPPORTS 1 DRIVER, 1 RECEIVER WITH INTERFACE STANDARD RS-485/422	YES	e3			5 mm		150 ns
ADM2484EBRWZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			700 ns	EIA-485-A; TIA-485-A; EIA-422; ISO 8482E	40 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	3.6 V	3.3/5,3.3	SMALL OUTLINE	SOP16,.4	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V		-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	1.5 Amp		1	ALSO REQUIRES 3V TO 3.6V SUPPLY	YES	e3	30	260	10.3 mm	1.5 V	200 ns
DP83630SQX/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1				IEEE 1588		DIFFERENTIAL	3.3 V	3.6 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V		.00001 Amp	3 V	.5 mm	85 Cel	3.3 V		-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N48	2	.8 mm	7 mm				1		YES	e3	30	260	7 mm		0 ns
ICL3221EIAZ-T	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS			EIA-232; TIA-232; V.24; V.28		SCHMITT TRIGGER	3.3 V			SMALL OUTLINE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	3	2 mm	5.3 mm				1		NO	e3	30	260	6.2 mm
AD2428WCCSZ-RL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	1.98 V	1	DMOS	AEC-Q100			12 mA	STANDARD	1.9 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20				1.7 V	.5 mm	105 Cel		OPEN-DRAIN	-40 Cel	1		QUAD	S-XQCC-N32		.8 mm	5 mm		1.5 Amp		1		YES				5 mm
MAX232EIDR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				EIA-232-F; TIA-232-F; V.28	10 mA	SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	5 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	3.2 Amp	INVERTED	2		NO	e4	NOT SPECIFIED	260	9.9 mm	10 V	0 ns
MAX3232IPW	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			300 ns	EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp	INVERTED	2	CAN ALSO OPERATE WITH 5V SUPPLY	NO	e4	30	260	5 mm	10 V	300 ns
SN65HVD1782DRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			50 ns	EIA-485-A; TIA-485-A	6 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	3.3/5	SMALL OUTLINE	SOP8,.25	3.15 V	Line Driver or Receivers		3.15 V	1.27 mm	105 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4.9 mm	.8 V	80 ns
ADM2485BRWZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			55 ns	EIA-485-A; TIA-485-A; ISO 8482E		DIFFERENTIAL SCHMITT TRIGGER	3 V	5.25 V	3/5,5	SMALL OUTLINE	SOP16,.4	4.75 V	Line Driver or Receivers		2.7 V	1.27 mm	85 Cel	5 V		-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	4 Amp		1	INTEGRATED OSCILLATOR DRIVER FOR EXTERNAL TRANSFORMER & PROFIBUS COMPLIANT	YES	e3	30	260	10.3 mm	2.1 V	55 ns
ISO3080DW	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			1.3 ns	EIA-422; TIA-422; EIA-485; TIA-485	15 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V	3.3/5,5	SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.00001 Amp	3.15 V	1.27 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	10.3 mm	1.5 V	125 ns
ISL81387IAZ-T	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS		2000 ns	EIA-232; EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE, SHRINK PITCH	SSOP20,.3				4.5 V	.65 mm	85 Cel		3-STATE	-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G20	2	1.99 mm	5.29 mm	Not Qualified	3 Amp	TRUE	2		YES	e3	30	260	7.2 mm	10 V	120 ns
LTM2881HY-3#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	BALL	32	BGA	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			85 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V		GRID ARRAY		3 V			1.62 V	1.27 mm	105 Cel	3.3 V		-40 Cel	1	TIN SILVER COPPER	BOTTOM	R-PBGA-B32	3	3.62 mm	11.25 mm	Not Qualified			1		YES	e1	30	245	15 mm		140 ns
AM26LV32IDR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS			EIA-422-B; TIA-422-B; V.11	17 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	5 Amp	TRUE	4		NO	e4	30	260	9.9 mm		20 ns
DS91M040TSQX/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	4			5.5 ns	EIA-899; TIA-899	75 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	3 V	Line Driver or Receivers	.000015 Amp	3 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	MATTE TIN	QUAD	S-XQCC-N32	3	.8 mm	5 mm	Not Qualified	8 Amp	COMPLEMENTARY	4		YES	e3	30	260	5 mm		4.5 ns
SN65HVD3080EDGSRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		1300 ns	EIA-485-A; TIA-485-A; EIA-422	.75 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20		Line Driver or Receivers	.0001 Amp	4.5 V	.5 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G10	2	1.1 mm	3 mm	Not Qualified	10 Amp		1		YES	e4	30	260	3 mm	1.5 V	100 ns
DS26C31TMX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS		11 ns	EIA-422	2 mA	STANDARD	5 V	5.5 V	5	SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified		TRUE			YES	e3	30	260	9.9 mm		0 ns
ISL81387IAZ-T7A	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS		2000 ns	EIA-232		SCHMITT TRIGGER	5 V			SMALL OUTLINE, SHRINK PITCH					4.5 V	.65 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G20	2	1.99 mm	5.29 mm				2		NO	e3	30	260	7.2 mm		120 ns
MAX232IDWR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS			EIA-232-F; TIA-232-F; V.28	10 mA	SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	5 V	TOTEM-POLE	-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	3.2 Amp	INVERTED	2	EXTERNAL CHARGE PUMP	NO	e4	NOT SPECIFIED	260	10.3 mm	10 V	0 ns
ADM101EARMZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	10	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS			EIA-232	1 mA	SCHMITT TRIGGER	5 V		5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20		Line Driver or Receivers		4.5 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G10	1	1.1 mm	3 mm	Not Qualified	1.6 Amp		1		NO	e3		260	3 mm	6.5 V	5000 ns
SN65LVDS1DBV	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	TTL		3.1 ns	EIA-644-A; TIA-644-A		STANDARD	3.3 V		2.5/3.3	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37		Line Driver or Receivers	.00002 Amp	2.4 V	.95 mm	85 Cel		TOTEM-POLE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G5	1	1.45 mm	1.6 mm	Not Qualified					YES	e4	30	260	2.9 mm	.247 V	3.6 ns
DS26C32ATMX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	6 Amp		4		NO	e0	20	235	9.9 mm		30 ns
SP3232EEN-L	Exar	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				EIA-232; EIA-232-D; EIA-232-F; V.24; V.28; EIA-562; TIA-232; TIA-232-F; TIA-562	1 mA	SCHMITT TRIGGER	3.3 V		3/5	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	2	1.75 mm	3.9 mm	Not Qualified	1.6 Amp		2		NO	e3		260	9.9 mm	10 V	0 ns
TRS3253EIRSMR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.5 V	5				EIA-232	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.16SQ,16	3 V	Line Driver or Receivers	.000001 Amp	3 V	.4 mm	85 Cel	3.3 V		-40 Cel	3	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32	2	1 mm	4 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e4	30	260	4 mm	10 V	0 ns
ADV7611BSWZ-P	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	64	HLFQFP	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1	CMOS			GENERAL PURPOSE		STANDARD	1.8 V			FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH					1.71 V	.5 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G64	3	1.6 mm	10 mm	Not Qualified			1		NO	e3	30	260	10 mm		0 ns
ADM202EARNZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS		1500 ns	EIA-232-E; V.28	6 mA	SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	3.2 Amp		2		NO	e3	30	260	9.9 mm	10 V	1000 ns
LTC2861IDE#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	12	HVSON	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		50 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					4.5 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-N12	1	.8 mm	3 mm	Not Qualified			1		YES	e3	30	260	4 mm		70 ns
MAX3221IDBR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	5.5 V	3.3/5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	4.5 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	5 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	1	ALSO OPERATE WITH 5V SUPPLY	NO	e4	30	260	6.2 mm	10 V	150 ns
SN65LVDS4RSET	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	10	VQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	2.75 V	1			3.3 ns	GENERAL PURPOSE		DIFFERENTIAL	1.8 V	1.98 V	1.8/2.5	CHIP CARRIER, VERY THIN PROFILE	LCC10,.06X.08,20	1.62 V	Line Driver or Receivers		1.62 V	.5 mm	85 Cel	1.8 V	DIFFERENTIAL	-40 Cel		NICKEL PALLADIUM GOLD SILVER	QUAD	R-PQCC-N10	1	.6 mm	1.5 mm	Not Qualified	8 Amp	COMPLEMENTARY	1	ALSO OPERATES WITH 2.5V	YES	e4	30	260	2 mm		3.3 ns
AM26C32IDR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BICMOS			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	6 Amp	TRUE	4		NO	e4	NOT SPECIFIED	260	9.9 mm		27 ns
ISL3280EIHZ-T	Renesas Electronics	LINE RECEIVER	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS			EIA-485; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH					3 V	.95 mm	85 Cel			-40 Cel		MATTE TIN	DUAL	R-PDSO-G5	2	1.45 mm	1.6 mm				1		NO	e3	30	260	2.9 mm		60 ns
ISL3283EIHZ-T7A	Renesas Electronics	LINE RECEIVER	INDUSTRIAL	GULL WING	6	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS			EIA-485; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH					3 V	.95 mm	85 Cel			-40 Cel		MATTE TIN	DUAL	R-PDSO-G6	2	1.45 mm	1.6 mm				1			e3	30	260	2.9 mm		60 ns
ST3485EBD	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			30 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		1		YES	e4	30	260	4.9 mm	1.5 V	50 ns
ST490ABDR	STMicroelectronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			16 ns	EIA-422; EIA-485	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		1		YES	e4	30	260	4.9 mm	1.5 V	30 ns
MAX3221IDBRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	5.5 V	3.3/5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	4.5 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	5 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	1	ALSO OPERATE WITH 5V SUPPLY	NO	e4	30	260	6.2 mm	10 V	150 ns
MAX3430ESA	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	BICMOS		1500 ns	EIA-422; EIA-485; TIA-485	10 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000001 Amp	2.97 V	2.54 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	4.572 mm	7.62 mm	Not Qualified	1.6 Amp		1		YES	e0	20	240	9.375 mm	1.5 V	120 ns
MAX3430ESA+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	BICMOS		1500 ns	EIA-422; EIA-485; TIA-485	10 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000001 Amp	2.97 V	2.54 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	4.572 mm	7.62 mm	Not Qualified	1.6 Amp		1		YES	e3	30	260	9.375 mm	1.5 V	120 ns
MAX3491EESD	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			35 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	2.5 Amp		1		YES	e0			8.65 mm	1.5 V	0 ns
MAX3491EESD+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			35 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	2.5 Amp		1		YES	e3	30	260	8.65 mm	1.5 V	0 ns
MAX3072EESA	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	BICMOS		1500 ns	EIA-422; EIA-485; TIA-485	1.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		2.97 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified	1 Amp		1		YES	e0			4.9 mm	1.5 V	200 ns
MAX3072EESA+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	BICMOS		1500 ns	EIA-422; EIA-485; TIA-485	1.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		2.97 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	1 Amp		1		YES	e3	30	260	4.9 mm	1.5 V	200 ns
DS10BR150TSDX/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			.6 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V		3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.11,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N8	3	.8 mm	3 mm	Not Qualified			1		YES	e3	30	260	3 mm		.6 ns
LTC2862IS8-1#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.752 mm	3.899 mm				1		YES	e3	30	260	4.9025 mm		65 ns
MAX3232IDWRE4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			300 ns	EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5	SMALL OUTLINE	SOP16,.4	3 V	Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	85 Cel	3.3 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	2	CAN ALSO OPERATE WITH 5V SUPPLY	NO	e4	NOT SPECIFIED	260	10.3 mm	10 V	300 ns
LTC1535ISW#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		1560 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V	7.5 V		SMALL OUTLINE		4.5 V			4.5 V	1.27 mm	85 Cel	5 V		-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified			1		YES	e3	30	260	17.9 mm		855 ns
FIN1001M5X	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			1.5 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH	TSOP5/6,.11,37		Line Driver or Receivers	.00002 Amp	3 V	.95 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G5	1	1.4 mm	1.6 mm	Not Qualified					YES	e3	30	260	2.9 mm	.25 V
MAX3491EESD-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		35 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.000002 Amp	3 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	2.5 Amp		1		YES	e0		245	8.65 mm	1.5 V	90 ns
MAX3491EESD+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			35 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	2.5 Amp		1		YES	e3	30	260	8.65 mm	1.5 V	0 ns
SN65C1168EPWRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2			16 ns	EIA-422-B; TIA-422-B; V.11	9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	.65 mm	85 Cel	5 V	3-STATE	-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	20 Amp	TRUE	2		YES	e4	30	260	5 mm	2 V	27 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.