NO LEAD Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
5962-88744012X	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR	MIL-STD-883	20 ns	GENERAL PURPOSE		GATED	5 V	5.25 V			CHIP CARRIER		4.75 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	2		QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Qualified				1 SINGLE INPUT DRIVER	YES				8.89 mm
DS100BR410SQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	2.625 V	4	4	CMOS			GENERAL PURPOSE		DIFFERENTIAL	2.5 V	2.625 V	2.5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.28SQ,20	2.375 V	Line Driver or Receivers	.00001 Amp	2.375 V	.5 mm	85 Cel	2.5 V	DIFFERENTIAL	-40 Cel	4	MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm		7 mm	Not Qualified		COMPLEMENTARY	4		YES	e3	30	260	7 mm		0 ns
SN65LVPE512RGER	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	3.6 V	2	2			.37 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.5 mm	85 Cel	3.3 V		-40 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24	2	1 mm		4 mm				2		YES	e4	30	260	4 mm		.37 ns
DS26LS31MEFQML	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	300k Rad(Si)	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4			MIL-PRF-38535 Class Q	30 ns	EIA-422; FED STD 1020		STANDARD	5 V				CHIP CARRIER					4.5 V	1.27 mm	125 Cel			-55 Cel	4		QUAD	S-CQCC-N20		1.91 mm		8.89 mm	Not Qualified					YES				8.89 mm
DS90UR905QSQX	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		UNSPECIFIED	YES	1.89 V	1					I2C		DIFFERENTIAL	1.8 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					1.71 V	.5 mm	105 Cel			-40 Cel	1		QUAD	S-XQCC-N48		.8 mm		7 mm	Not Qualified			1		YES				7 mm
SN65LBC176QFK	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.25 V	1		BICMOS		31 ns	EIA-485; ISO 8482	3.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	125 Cel			-40 Cel	1		QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Not Qualified	8 Amp		1	COMMON I/O: TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES		NOT SPECIFIED	NOT SPECIFIED	8.89 mm	1.1 V	37 ns
DS90UB924TRHSTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm		7 mm				1		NO	e3	30	260	7 mm
DS90CF384AMDA	Texas Instruments	LINE RECEIVER	COMMERCIAL	NO LEAD		DIE	UNSPECIFIED		UNSPECIFIED	YES	3.6 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V				UNCASED CHIP					3 V		70 Cel			-10 Cel			UPPER	X-XUUC-N					Not Qualified			4
DS26LS31ME/883	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4			MIL-STD-883	15 ns	EIA-422; FED STD 1020		STANDARD	5 V				CHIP CARRIER					4.5 V	1.27 mm	125 Cel			-55 Cel	4		QUAD	S-CQCC-N20		1.905 mm		8.89 mm	Not Qualified					YES				8.89 mm
5962-9318301Q2A	Texas Instruments	LINE TRANSCEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.25 V	1		BICMOS	MIL-PRF-38535 Class Q	31 ns	EIA-485-A; TIA-485-A; ISO 8482	5.4 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		CHIP CARRIER	LCC20,.35SQ	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	125 Cel	5 V		-55 Cel	1	Tin/Lead (Sn/Pb)	QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Qualified	8 Amp		1	COMMON I/O: TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e0	NOT SPECIFIED	NOT SPECIFIED	8.89 mm	1.1 V	37 ns
5962F8961501V9A	Texas Instruments	LINE TRANSCEIVER	MILITARY	NO LEAD	12	DIE	RECTANGULAR	300k Rad(Si)	UNSPECIFIED	YES	5.5 V	1			MIL-PRF-38535 Class V	25 ns	EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				UNCASED CHIP					4.5 V		125 Cel			-55 Cel	1		UPPER	R-XUUC-N12					Qualified			1		YES						38 ns
5962-9076503Q2A	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.25 V	4		BICMOS	MIL-PRF-38535 Class Q	40 ns	EIA-485	7 mA	STANDARD	5 V	5.25 V	5		CHIP CARRIER	LCC20,.35SQ	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	4	TIN LEAD	QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Qualified		TRUE			YES	e0			8.89 mm	1.1 V	0 ns
DS25BR110TSD	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE		UNSPECIFIED	YES	3.6 V	1				.465 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-XDSO-N8	3	.8 mm		3 mm	Not Qualified					YES	e0			3 mm
DS90C185SQX/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	NO LEAD	48	HVQCCN	SQUARE		PLASTIC/EPOXY	YES		5				93.96 ns		85 mA		1.8 V	1.89 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16	1.71 V	Line Driver or Receivers			.4 mm	70 Cel	1.8 V	DIFFERENTIAL	-10 Cel		MATTE TIN	QUAD	S-PQCC-N48	1	.8 mm		6 mm	Not Qualified		COMPLEMENTARY	5		YES	e3	30	260	6 mm		0 ns
DS90UA102TRHSTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	1.89 V	1			AEC-Q100		ISO 10605	96 mA	DIFFERENTIAL	1.8 V	1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.28SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm		7 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	7 mm		0 ns
LMH0070SQX	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	2.625 V	5					GENERAL PURPOSE		STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	5	TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm		7 mm	Not Qualified					NO	e0	30	235	7 mm
DS15BR400TSQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE		UNSPECIFIED	YES	3.6 V	1				2 ns	GENERAL PURPOSE	215 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	MATTE TIN	QUAD	S-XQCC-N32	3	.8 mm		5 mm	Not Qualified		COMPLEMENTARY	4		YES	e3	30	260	5 mm	2 V	2 ns
LMH0307SQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE		UNSPECIFIED	YES	3.465 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V	3.465 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	3.135 V	Line Driver or Receivers		3.135 V	.65 mm	85 Cel	3.3 V		-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	3	.8 mm		4 mm	Not Qualified		TRUE			YES	e3	30	260	4 mm	.72 V	0 ns
DS90C031MDR	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD		DIE	RECTANGULAR		UNSPECIFIED	YES	5.5 V	4		CMOS		5 ns	IEEE 1596.3		STANDARD	5 V	5.5 V			UNCASED CHIP		4.5 V			4.5 V		125 Cel	5 V		-55 Cel	4		UPPER	R-XUUC-N	1									YES
DS15MB200TSQX	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	3.6 V	2		CMOS		2.5 ns	GENERAL PURPOSE	275 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20		Other Interface ICs		3 V	.5 mm	85 Cel			-40 Cel	2		QUAD	S-PQCC-N48		.8 mm		7 mm	Not Qualified			2		YES		NOT SPECIFIED	NOT SPECIFIED	7 mm		2.5 ns
LMH0070SQX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		UNSPECIFIED	YES	2.625 V	5					GENERAL PURPOSE		DIFFERENTIAL	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel	5	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm		7 mm						NO	e3	30	260	7 mm		0 ns
MAX3238EIRHBR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	VQCCN	SQUARE		PLASTIC/EPOXY	YES	3.6 V	3				150 ns	EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V		3.3/5		CHIP CARRIER, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers	.000001 Amp	3 V	.5 mm	85 Cel			-40 Cel	5	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32		1 mm		5 mm	Not Qualified	1.6 Amp		3	ALSO OPERATES AT 5V SUPPLY	NO	e4			5 mm	10 V	150 ns
SN65C3238EIRHBR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	VQCCN	SQUARE		PLASTIC/EPOXY	YES	3.6 V	3		BIPOLAR			EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V		3.3/5		CHIP CARRIER, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers	.000001 Amp	3 V	.5 mm	85 Cel			-40 Cel	5		QUAD	S-PQCC-N32		1 mm		5 mm	Not Qualified	1.6 Amp		3	ALSO OPERATES AT 5V SUPPLY	NO				5 mm	10 V	0 ns
5962-88745012A	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR	MIL-STD-883		GENERAL PURPOSE	50 mA	DIFFERENTIAL	5 V	5.5 V	5		CHIP CARRIER	LCC20,.35SQ	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	125 Cel	5 V		-55 Cel		TIN LEAD	QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Qualified	15 Amp	INVERTED	2	OPEN-COLLECTOR OR TOTEM-POLE OUTPUT	NO	e0			8.89 mm		50 ns
DS90UB633ARTVRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	1.89 V	1			AEC-Q100		GENERAL PURPOSE	95 mA	STANDARD	1.8 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20				1.71 V	.5 mm	105 Cel		3-STATE	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N32	3	.8 mm		5 mm			COMPLEMENTARY			YES	e3	30	260	5 mm
DS90UB902QSQE	Texas Instruments	LINE RECEIVER		NO LEAD	40		SQUARE		UNSPECIFIED	YES														CHIP CARRIER													QUAD	S-XQCC-N40					Not Qualified
DS15BR401TSQ	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE		UNSPECIFIED	YES	3.6 V	1				2 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	4		QUAD	S-XQCC-N32		.8 mm		5 mm	Not Qualified			4		YES		NOT SPECIFIED	NOT SPECIFIED	5 mm		2 ns
THS6132RGW	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	16 V	2					GENERAL PURPOSE		STANDARD	5 V	16 V	+-5/+-15	-5 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.20SQ,25	3.3 V	Line Driver or Receivers		3.3 V	.65 mm	85 Cel	15 V		-40 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N20		1 mm		5 mm	Not Qualified					NO	e4			5 mm		0 ns
5962-89681012B	Texas Instruments	LINE TRANSCEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.25 V	8			MIL-STD-883	16 ns	GENERAL PURPOSE		SCHMITT TRIGGER	5 V				CHIP CARRIER					4.75 V		125 Cel			-55 Cel	8		QUAD	S-CQCC-N20					Not Qualified			8		NO						18 ns
DS90UR906QSQ	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	60	HVQCCN	SQUARE		UNSPECIFIED	YES	1.89 V	1					I2C		DIFFERENTIAL SCHMITT TRIGGER	1.8 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					1.71 V	.5 mm	105 Cel			-40 Cel	1		QUAD	S-XQCC-N60		.8 mm		9 mm	Not Qualified			1		YES				9 mm
THS6204IRHFR	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	RECTANGULAR		PLASTIC/EPOXY	YES	28 V	1	2	BIPOLAR			GENERAL PURPOSE	22 mA	DIFFERENTIAL	12 V	14 V	+-6/+-12	-6 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16X.2,20	5 V	Line Driver or Receivers		10 V	.5 mm	85 Cel	6 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N24	2	1 mm	.416 A	4 mm	Not Qualified		COMPLEMENTARY			NO	e4	30	260	5 mm		0 ns
DS90UB904QSQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	1.89 V	1			AEC-Q100		GENERAL PURPOSE	96 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm		7 mm	Not Qualified		TRUE	1			e3	30	260	7 mm		0 ns
LMH0002SQX	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE		UNSPECIFIED	YES	3.465 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3.135 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N16	1	.8 mm		4 mm	Not Qualified					YES	e0		260	4 mm
DS15BR401TSQX/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE		UNSPECIFIED	YES	3.6 V	4				2 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	4	MATTE TIN	QUAD	S-XQCC-N32	3	.8 mm		5 mm	Not Qualified			4		YES	e3	30	260	5 mm		2 ns
DS9622ME/883	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES		2		BIPOLAR	MIL-STD-883		GENERAL PURPOSE		DIFFERENTIAL	5 V		5,-10		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers			1.27 mm	125 Cel		TOTEM-POLE	-55 Cel		Tin/Lead (Sn/Pb)	QUAD	S-CQCC-N20		1.905 mm		8.89 mm	Not Qualified	12.4 Amp	INVERTED	2	BUILT-IN LINE TERMINATION		e0			8.89 mm		50 ns
SN65LVDS315RGERG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	1.95 V	1					GENERAL PURPOSE	13.3 mA	STANDARD	1.8 V		1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20		Line Driver or Receivers		1.65 V	.5 mm	85 Cel			-40 Cel	8	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N24	3	1 mm		4 mm	Not Qualified				DUMMY VAL	YES	e4	30	260	4 mm		0 ns
DS9637ACMWC	Texas Instruments	LINE RECEIVER	COMMERCIAL	NO LEAD		DIE	UNSPECIFIED		UNSPECIFIED	YES	5.25 V	2		BIPOLAR			EIA-422; EIA-423; MIL-STD-188-114		DIFFERENTIAL SCHMITT TRIGGER	5 V				UNCASED CHIP					4.75 V		70 Cel			0 Cel			UPPER	X-XUUC-N					Not Qualified			2								25 ns
DS90UA101TRTVRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE		PLASTIC/EPOXY	YES		1			AEC-Q100					1.8 V	1.89 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-PQCC-N32	3	.8 mm		5 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	5 mm		0 ns
DS25BR204TSQ	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE		UNSPECIFIED	YES	3.6 V	4				.6 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	4		QUAD	S-XQCC-N40		.8 mm		6 mm	Not Qualified			2		YES				6 mm		.6 ns
DS90UB914QSQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		PLASTIC/EPOXY	YES		1			AEC-Q100			114 mA			1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm		7 mm	Not Qualified		TRUE	1		YES	e3	30	260	7 mm		0 ns
TRS3243ECRHBRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	32	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	3.6 V	3					EIA-232-F; TIA-232-F	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	70 Cel	3.3 V		0 Cel	3	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32	2	1 mm		5 mm	Not Qualified	.001 Amp	TRUE	5		NO	e4	30	260	5 mm	10 V	0 ns
DS3691MDC	Texas Instruments	LINE DRIVER	COMMERCIAL	NO LEAD		DIE	UNSPECIFIED		UNSPECIFIED	YES	5.25 V	2		BIPOLAR		300 ns	EIA-423; EIA-442		STANDARD	5 V			-5 V	UNCASED CHIP					4.75 V		70 Cel			0 Cel	2		UPPER	X-XUUC-N					Not Qualified				CONFIGURABLE INTERFACE STANDARDS	YES
DS90UH926QSQE	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	60	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1		CMOS						3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	105 Cel			-40 Cel	1		QUAD	S-PQCC-N60		.8 mm		9 mm				1		YES				9 mm
DS25BR204TSQ/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	3.6 V	2				.6 ns		185 mA		3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm		6 mm	Not Qualified		COMPLEMENTARY	2		YES	e3	30	260	6 mm		.6 ns
DS15BR400TSQ	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE		UNSPECIFIED	YES	3.6 V	1				2 ns	GENERAL PURPOSE	215 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	TIN LEAD	QUAD	S-XQCC-N32	3	.8 mm		5 mm	Not Qualified		COMPLEMENTARY	4		YES	e0		260	5 mm	2 V	2 ns
5962-7802302M2A	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-STD-883	25 ns	EIA-422; FED STD 1020	40 mA	STANDARD	5 V	5.5 V			CHIP CARRIER		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	4		QUAD	S-CQCC-N20	1	1.91 mm		8.89 mm	Qualified					YES				8.89 mm
DS25MB100TSQX	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE		UNSPECIFIED	YES	3.465 V	2				1 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3.135 V	.5 mm	85 Cel			-40 Cel	2	TIN	QUAD	S-XQCC-N36	3	.8 mm		6 mm	Not Qualified			2		YES	e3			6 mm		1 ns
5962-87547012A	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR	MIL-PRF-38535	15 ns	V.35	35 mA	GATED	5 V	5.5 V	+-5	-5 V	CHIP CARRIER	LCC20,.35SQ	4.5 V	Line Driver or Receivers	.00004 Amp	4.5 V	1.27 mm	125 Cel	5 V	CONSTANT-CURRENT	-55 Cel	2	Tin/Lead (Sn/Pb)	QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Qualified		COMPLEMENTARY		HIGH DRIVE	YES	e0	NOT SPECIFIED	NOT SPECIFIED	8.89 mm	2 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.