NO LEAD Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
5962-88511012X	Texas Instruments	LINE TRANSCEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	1			MIL-STD-883	30 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V			CHIP CARRIER		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	1		QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Qualified			1	1 RECEIVER ACTIVE UNDER SHUTDOWN; CONFIGURABLE TOTEM-POLE OUTPUTS; DIFFERENTIAL OUTPUT PAIRS	YES				8.89 mm		75 ns
DS90UH940TNKDRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	2			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			3 V	.5 mm	105 Cel	1.8 V		-40 Cel		Matte Tin (Sn)	QUAD	S-XQCC-N64	3	.8 mm		9 mm				2		NO	e3	30	260	9 mm
5962-89681012X	Texas Instruments	LINE TRANSCEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.25 V	8			MIL-STD-883	16 ns	GENERAL PURPOSE		SCHMITT TRIGGER	5 V	5.25 V			CHIP CARRIER		4.75 V			4.75 V		125 Cel	5 V		-55 Cel	8		QUAD	S-CQCC-N20					Qualified			8		NO						18 ns
THS6132RGWR	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	16 V	2					GENERAL PURPOSE		STANDARD	5 V	16 V	+-5/+-15	-5 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC20,.20SQ,25	3.3 V	Line Driver or Receivers		3.3 V	.65 mm	85 Cel	15 V		-40 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N20	2	1 mm		5 mm	Not Qualified					NO	e4	30	260	5 mm		0 ns
5962-9762101Q2X	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	3.6 V	4			MIL-PRF-38535 Class Q	4.5 ns	EIA-644; TIA-644		STANDARD	3.3 V	3.6 V			CHIP CARRIER		3 V			3 V	1.27 mm	125 Cel	3.3 V		-55 Cel	4		QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Qualified					YES				8.89 mm
5962-87769012A	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.25 V	2		BIPOLAR	MIL-PRF-38535	50 ns	GENERAL PURPOSE		GATED	5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	125 Cel		OPEN-EMITTER	-55 Cel	2		QUAD	S-CQCC-N20					Not Qualified					NO		NOT SPECIFIED	NOT SPECIFIED		2.4 V	0 ns
DS90UH949ATRGCTQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL	1.8 V	1.155 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.045 V			1.71 V	.5 mm	105 Cel	1.1 V		-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm		9 mm						YES	e4	30	260	9 mm
THS6212YS	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	17	DIE	RECTANGULAR	UNSPECIFIED	YES	28 V	2	1						STANDARD	12 V	14 V			UNCASED CHIP		5 V			10 V		85 Cel	6 V		-40 Cel	2		UPPER	R-XUUC-N17				1.877 mm						NO				2.053 mm
5962-7802301Q2X	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-STD-883	30 ns	EIA-422; FED STD 1020		STANDARD	5 V	5.5 V			CHIP CARRIER		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	4		QUAD	S-CQCC-N20		1.905 mm		8.89 mm	Qualified					YES				8.89 mm
THS6182RHFRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2					GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16X.2,20		Line Driver or Receivers		5 V	.5 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N24	2	1 mm		4 mm	Not Qualified				ALSO OPERATES WITH 24V SINGLE SUPPLY	NO	e4	30	260	5 mm		0 ns
TUSB1046A-DCIRNQR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	40	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1							DIFFERENTIAL	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.4 mm	70 Cel	3.3 V		0 Cel	1	NICKEL PALLADIUM GOLD	QUAD	R-PQCC-N40	1	.8 mm		4 mm				1		YES	e4	30	260	6 mm
5962-88744012A	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR	MIL-STD-883	20 ns	GENERAL PURPOSE	65 mA	GATED	5 V	5.5 V	5		CHIP CARRIER	LCC20,.35SQ	4.5 V	Line Driver or Receivers	.00004 Amp	4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	2	Tin/Lead (Sn/Pb)	QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Qualified	.04 Amp	COMPLEMENTARY		1 SINGLE INPUT DRIVER	YES	e0	NOT SPECIFIED	NOT SPECIFIED	8.89 mm	2 V	0 ns
SN65LBC180RSA	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1		BICMOS		18 ns	EIA-485; ISO 8482		DIFFERENTIAL SCHMITT TRIGGER	5 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					4.75 V	.65 mm	85 Cel			-40 Cel	1		QUAD	S-PQCC-N16		1 mm		4 mm	Not Qualified			1		YES				4 mm		33 ns
5962-9583401Q2A	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		CMOS	MIL-PRF-38535 Class Q		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V			CHIP CARRIER		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	4		QUAD	S-CQCC-N20	1	1.905 mm		8.89 mm	Qualified			4		NO				8.89 mm		8 ns
5962-9690302Q2A	Texas Instruments		MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC	YES				BIPOLAR	38535Q/M;38534H;883B			30 mA		5 V		+-5	-5 V	CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers			1.27 mm	125 Cel			-55 Cel			QUAD	S-XQCC-N20					Not Qualified	16 Amp										25 ns
DS25BR100TSD	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	3.6 V	1				.465 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-XDSO-N8	3	.8 mm		3 mm	Not Qualified					YES	e0			3 mm
DS90UB940NTNKDTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	1.26 V	2			AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER	1.2 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.14 V	.5 mm	105 Cel	3.3 V		-40 Cel		Matte Tin (Sn)	QUAD	S-XQCC-N64	3	.8 mm		9 mm				2	ALSO HAS SUPPLY VOLTAGE RANGING FROM 3 TO 3.6 V	NO	e3	30	260	9 mm
DS90UR905QSQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1			AEC-Q100		GENERAL PURPOSE		SCHMITT TRIGGER	1.8 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.71 V	.5 mm	105 Cel	3.3 V		-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm		7 mm	Not Qualified					YES	e3	30	260	7 mm
THS6302IRHFR	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	28	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	12.6 V	1	2				GENERAL PURPOSE		DIFFERENTIAL	12 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.16X.2,20				11.4 V	.5 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N28	2	1 mm	.08 A	4 mm			TRUE			YES	e4	30	260	5 mm
DS90UA102TRHSRQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1			AEC-Q100		ISO 10605	96 mA	DIFFERENTIAL	1.8 V	1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.28SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm		7 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	7 mm		0 ns
SN65MLVD2DRBR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-899; TIA-899	25 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N8	2	1 mm		3 mm	Not Qualified	8 Amp	TRUE	1		NO	e4	30	260	3 mm	.48 V	6 ns
AM26LS32AMFK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel		3-STATE	-55 Cel			QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Not Qualified	8 Amp	TRUE	4						8.89 mm		35 ns
DS90UH925ATRHSRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100		ISO 10605		STANDARD	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.5 mm	105 Cel	3.3 V		-40 Cel	1	Matte Tin (Sn)	QUAD	S-PQCC-N48	3	.8 mm		7 mm						YES	e3	NOT SPECIFIED	260	7 mm
LMH0051SQX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	1					GENERAL PURPOSE		DIFFERENTIAL	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm		7 mm				5		YES	e3	30	260	7 mm		0 ns
DS26LS32ME/883	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4			MIL-STD-883		EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V				CHIP CARRIER					4.5 V	1.27 mm	125 Cel			-55 Cel			QUAD	S-CQCC-N20		1.91 mm		8.89 mm	Not Qualified			4		NO				8.89 mm		120 ns
DS90C187LFX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	NO LEAD	92	LGA	SQUARE	PLASTIC/EPOXY	YES		5						150 mA		1.8 V	1.89 V	1.8		GRID ARRAY	SLGA92,14X14,20	1.71 V	Line Driver or Receivers			.5 mm	70 Cel	1.8 V		-10 Cel		NICKEL PALLADIUM GOLD	BOTTOM	S-PBGA-N92	3	1 mm		7 mm	Not Qualified			5		YES	e4	30	260	7 mm		0 ns
5962-9076502M2X	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-STD-883	25 ns	EIA-485	50 mA	STANDARD	5 V	5.5 V			CHIP CARRIER	LCC20,.35SQ	4.5 V		.00002 Amp	4.5 V	1.27 mm	125 Cel	5 V	DIFFERENTIAL	-55 Cel	4		QUAD	S-CQCC-N20		1.905 mm		8.89 mm	Qualified		COMPLEMENTARY			YES				8.89 mm
DS100KR800SQ/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	54	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES		4	8								2.625 V	2.5,3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC54,.2X.4,20	2.375 V	Line Driver or Receivers	.00001 Amp		.5 mm	85 Cel	2.5 V	DIFFERENTIAL	-40 Cel	4	MATTE TIN	QUAD	R-PQCC-N54	2	.8 mm		5.5 mm	Not Qualified		COMPLEMENTARY	4		YES	e3	30	260	10 mm		0 ns
DS90UB902QSQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			96 mA			1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm		6 mm	Not Qualified		TRUE	1		YES	e3	30	260	6 mm		0 ns
DS9637AMMD8	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD		DIE	UNSPECIFIED	UNSPECIFIED	YES	5.5 V	2		BIPOLAR			EIA-422; EIA-423; MIL-STD-188-114		DIFFERENTIAL SCHMITT TRIGGER	5 V				UNCASED CHIP					4.5 V		125 Cel			-55 Cel			UPPER	X-XUUC-N					Not Qualified			2								25 ns
LMH0041SQ	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	6					GENERAL PURPOSE		STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel		TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm		7 mm	Not Qualified			6		NO	e0	30	235	7 mm
LMH0303SQ/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1					GENERAL PURPOSE	57 mA	DIFFERENTIAL	3.3 V	3.46 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	3.13 V	Line Driver or Receivers		3.135 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	3	.8 mm		4 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	4 mm	.72 V	0 ns
THS6184RHFT	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	RECTANGULAR	UNSPECIFIED	YES	32 V	1	4	BIPOLAR			GENERAL PURPOSE		STANDARD	12 V	15 V	+-4/+-16	-12 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16X.2,20	4 V	Line Driver or Receivers		8 V	.5 mm	85 Cel	12 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N24	2	1 mm	.415 A	4 mm	Not Qualified		COMPLEMENTARY			NO	e4	30	260	5 mm		0 ns
5962-9076502M2A	Texas Instruments	LINE DRIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-STD-883	25 ns	EIA-485; EIA-422	50 mA		5 V	5.5 V			CHIP CARRIER		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	4		QUAD	S-CQCC-N20	1	1.91 mm		8.89 mm	Qualified					YES				8.89 mm
DS90UR907QSQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1			AEC-Q100		I2C	90 mA	DIFFERENTIAL	1.8 V	1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC36,.25SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		MATTE TIN	QUAD	S-XQCC-N36	3	.8 mm		6 mm	Not Qualified			1		NO	e3	30	260	6 mm		0 ns
5962-86888012A	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-PRF-38535		EIA-232-C	26 mA	SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel			-55 Cel			QUAD	R-CQCC-N20					Not Qualified	10 Amp		4		NO		NOT SPECIFIED	NOT SPECIFIED			127 ns
DS90UB927QSQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD		HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			160 mA			3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V				.5 mm	105 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm		6 mm			COMPLEMENTARY			YES	e3	30	260	6 mm		0 ns
DS14C88MDC	Texas Instruments	LINE DRIVER	COMMERCIAL EXTENDED	NO LEAD		DIE	UNSPECIFIED	UNSPECIFIED	YES	12.6 V	4		CMOS		6000 ns	EIA-232-D; V.28		GATED	9 V			-9 V	UNCASED CHIP					4.5 V		75 Cel			0 Cel	4		UPPER	X-XUUC-N					Not Qualified				1 SINGLE INPUT DRIVER	NO
THS6184RHFR	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	RECTANGULAR	UNSPECIFIED	YES	32 V	1	4	BIPOLAR			GENERAL PURPOSE		STANDARD	12 V	15 V	+-4/+-16	-12 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16X.2,20	4 V	Line Driver or Receivers		8 V	.5 mm	85 Cel	12 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	QUAD	R-XQCC-N24	2	1 mm	.415 A	4 mm	Not Qualified		COMPLEMENTARY			NO	e4	30	260	5 mm		0 ns
DS90UB940TNKDRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	2			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			3 V	.5 mm	105 Cel	1.8 V		-40 Cel		Matte Tin (Sn)	QUAD	S-XQCC-N64	3	.8 mm		9 mm				2		NO	e3	30	260	9 mm
DS15MB200TSQX/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS				275 mA		3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Other Interface ICs	.0002 Amp	3 V	.5 mm	85 Cel	3.3 V		-40 Cel	2	MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm		7 mm	Not Qualified			2		YES	e3	30	260	7 mm		0 ns
DS90UH949ATRGCRQ1	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1			AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL	1.8 V	1.155 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.045 V			1.71 V	.5 mm	105 Cel	1.1 V		-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm		9 mm						YES	e4	30	260	9 mm
THS6301IRSAT	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	12.6 V	1	1				GENERAL PURPOSE		DIFFERENTIAL	12 V	12.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		11.4 V			11.4 V	.65 mm	85 Cel	12 V		-40 Cel	1	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N16	1	1 mm	.085 A	4 mm						YES	e4	30	260	4 mm
5962-9076604Q2X	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.25 V	4		BICMOS	MIL-PRF-38535 Class Q		V.11; EIA-422-A; EIA-423-A; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V			CHIP CARRIER		4.75 V			4.75 V	1.27 mm	125 Cel	5 V		-55 Cel			QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Qualified			4						8.89 mm		35 ns
SN75DP128ARTQR	Texas Instruments	LINE TRANSCEIVER	OTHER	NO LEAD	56	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.25 V	4	2			.28 ns		65 mA	DIFFERENTIAL	5 V	5.25 V	5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC56,.31SQ,20	4.5 V	Other Interface ICs	.00001 Amp	4.5 V	.5 mm	85 Cel	5 V	DIFFERENTIAL	0 Cel	8	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N56	3	1 mm		8 mm	Not Qualified		COMPLEMENTARY	4		YES	e4	30	260	8 mm		.28 ns
LMH0051SQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	1					GENERAL PURPOSE	59 mA	DIFFERENTIAL	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm		7 mm			TRUE	5		YES	e3	30	260	7 mm		0 ns
MAX3222EIRHLR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2				300 ns	EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24/28,.14X.2,20		Line Driver or Receivers	.000001 Amp	3 V	.5 mm	85 Cel			-40 Cel	2		QUAD	R-PQCC-N24		1 mm		3.5 mm	Not Qualified	1.6 Amp		2	ALSO OPERATES AT 5V SUPPLY	NO				5.5 mm	10 V	300 ns
DS90UB902QSQ	Texas Instruments	LINE RECEIVER		NO LEAD	40		SQUARE	UNSPECIFIED	YES														CHIP CARRIER													QUAD	S-XQCC-N40					Not Qualified

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.