Analog Devices Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
ADA4930-1YCPZ-R7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES		1	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	105 Cel		-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	3	1 mm	3 mm	Not Qualified					YES	e3	30	260	3 mm		0 ns
ADM206ARZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS	5000 ns	EIA-232-E; V.28	7 mA	SCHMITT TRIGGER	5 V	5	SMALL OUTLINE	SOP24,.4	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	3	EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3	30	260	15.4 mm	10 V	5000 ns
ADM207EARZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS		EIA-232-E; V.28	13 mA	SCHMITT TRIGGER	5 V	5	SMALL OUTLINE	SOP24,.4	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	TOTEM-POLE	-40 Cel	5	MATTE TIN	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	3		NO	e3	30	260	15.4 mm	10 V	2000 ns
ADM211ARZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS	5000 ns	EIA-232-E; V.28	7 mA	SCHMITT TRIGGER	5 V	5	SMALL OUTLINE	SOP28,.4	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5	EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3	30	260	17.9 mm	10 V	5000 ns
ADM2795EARWZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		500 ns	EIA-422; EIA-485	130 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		SMALL OUTLINE	SOP16,.4		.000001 Amp	1.7 V	1.27 mm	85 Cel		-40 Cel	1	MATTE TIN		R-PDSO-G16	3	2.65 mm	7.5 mm		1 Amp		1		YES	e3	30	260	10.3 mm	2.1 V	200 ns
ADM2861EBRNZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		400 ns	RS-485; RS-422	53 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		SMALL OUTLINE, SHRINK PITCH	SSOP28,.4			3 V	.65 mm	105 Cel		-40 Cel	1		DUAL	R-PDSO-G28		2.65 mm	7.5 mm		2 Amp	COMPLEMENTARY	1		YES		NOT SPECIFIED	NOT SPECIFIED	10.3 mm	1.5 V	200 ns
ADM3065ETRMZ-EP-R7	Analog Devices	LINE TRANSCEIVER	MILITARY	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	DMOS	15 ns	EIA-485; TIA-485	172 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19			3 V	.65 mm	125 Cel	DIFFERENTIAL	-55 Cel	1		DUAL	S-PDSO-G8	1	1.1 mm	3 mm			COMPLEMENTARY	1		YES		30	260	3 mm		35 ns
ADM3065ETRZ-EP	Analog Devices	LINE TRANSCEIVER	MILITARY	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	DMOS	15 ns	EIA-485; TIA-485	172 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		SMALL OUTLINE	SOP8,.25			3 V	1.27 mm	125 Cel	DIFFERENTIAL	-55 Cel	1		DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm			COMPLEMENTARY	1		YES		30	260	4.9 mm		35 ns
ADM3202ARW	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS	1200 ns	EIA-232-E; TIA-232-E; V.28	10 mA	SCHMITT TRIGGER	3.3 V	3.3	SMALL OUTLINE	SOP16,.4	Line Driver or Receivers		3 V	1.27 mm	85 Cel		-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp		2		NO	e0		240	10.3 mm	5 V	1000 ns
ADM3222ARWZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	18	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS	1200 ns	EIA-232-E; TIA-232-E; V.28	12 mA	SCHMITT TRIGGER	3.3 V	3.3	SMALL OUTLINE	SOP18,.4	Line Driver or Receivers		3 V	1.27 mm	85 Cel		-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G18	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp		2		NO	e3		260	11.55 mm	10 V	1000 ns
ADM3311EACPZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3	CMOS		EIA-232	35 mA	SCHMITT TRIGGER	3.3 V	3/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Line Driver or Receivers		2.7 V	.5 mm	85 Cel		-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N32	3	1 mm	5 mm	Not Qualified	1.6 Amp		5		NO	e3	40	260	5 mm	10 V	1000 ns
ADM3311EACPZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3	CMOS		EIA-232	35 mA	SCHMITT TRIGGER	3.3 V	3/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Line Driver or Receivers		2.7 V	.5 mm	85 Cel		-40 Cel	3	MATTE TIN	QUAD	S-XQCC-N32	3	1 mm	5 mm	Not Qualified	1.6 Amp		5		NO	e3			5 mm	10 V	1000 ns
ADM3311EARUZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS		EIA-232	35 mA	SCHMITT TRIGGER	3.3 V	3/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Line Driver or Receivers		2.7 V	.65 mm	85 Cel		-40 Cel	3	MATTE TIN	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp		5		NO	e3	30	260	9.7 mm	10 V	1000 ns
ADM3311EARUZ-REEL	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS		EIA-232	35 mA	SCHMITT TRIGGER	3.3 V	3/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Line Driver or Receivers		2.7 V	.65 mm	85 Cel		-40 Cel	3	MATTE TIN	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp		5		NO	e3	30	260	9.7 mm	10 V	1000 ns
ADM3311EARUZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS		EIA-232	35 mA	SCHMITT TRIGGER	3.3 V	3/3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Line Driver or Receivers		2.7 V	.65 mm	85 Cel		-40 Cel	3	MATTE TIN	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp		5		NO	e3	30	260	9.7 mm	10 V	1000 ns
ADM3491AR-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS	1500 ns	EIA-422; EIA-485	1.2 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.3	SMALL OUTLINE	SOP14,.25	Line Driver or Receivers		3 V	1.27 mm	85 Cel		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified			1		YES	e0		240	8.65 mm	2 V	120 ns
ADM4850ARMZ-REEL7	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1		2500 ns	EIA-422; EIA-485	.16 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	Line Driver or Receivers	.000001 Amp	4.75 V	.65 mm	85 Cel		-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified	4 Amp		1		YES	e3	30	260	3 mm	1.5 V	1000 ns
ADM485JN	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BICMOS	15 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5	IN-LINE	DIP8,.3	Line Driver or Receivers	.000001 Amp	4.75 V	2.54 mm	70 Cel	3-STATE	0 Cel	1	TIN LEAD	DUAL	R-PDIP-T8		4.57 mm	7.62 mm	Not Qualified	4 Amp	COMPLEMENTARY	1	1 RECEIVER ACTIVE UNDER SHUTDOWN; COMMON I/O; TRISTATABLE RECEIVERS	YES	e0			9.27 mm	1.5 V	40 ns
ADM485JR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS	15 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5	SMALL OUTLINE	SOP8,.25	Line Driver or Receivers	.000001 Amp	4.75 V	1.27 mm	70 Cel	3-STATE	0 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	COMPLEMENTARY	1	1 RECEIVER ACTIVE UNDER SHUTDOWN; COMMON I/O; TRISTATABLE RECEIVERS	YES	e0		240	4.9 mm	1.5 V	40 ns
ADM485JR-REEL7	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS	15 ns	EIA-422; EIA-485	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5	SMALL OUTLINE	SOP8,.25	Line Driver or Receivers	.000001 Amp	4.75 V	1.27 mm	70 Cel	3-STATE	0 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	COMPLEMENTARY	1	1 RECEIVER ACTIVE UNDER SHUTDOWN; COMMON I/O; TRISTATABLE RECEIVERS	YES	e0		240	4.9 mm	1.5 V	40 ns
ADN4655BRSZ-RL7	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		4.5 ns	EIA-644; TIA-644	.082 mA	DIFFERENTIAL	3.3 V		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		.000005 Amp	3 V	.65 mm	125 Cel		-40 Cel	4		DUAL	R-PDSO-G20		2 mm	5.3 mm			COMPLEMENTARY	4		YES		NOT SPECIFIED	NOT SPECIFIED	7.2 mm		4.5 ns
ADN4690EBRZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			DMOS			24 mA		3.3 V	3.3	SMALL OUTLINE	SOP8,.25	Line Driver or Receivers	.00001 Amp		1.27 mm	85 Cel		-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1			Not Qualified	8 Amp				YES	e3	30	260		.48 V	0 ns
LT1080CN#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	18	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2	BIPOLAR		EIA-232	22 mA	SCHMITT TRIGGER	5 V		IN-LINE				4.5 V	2.54 mm	70 Cel	3-STATE	0 Cel	2	MATTE TIN	DUAL	R-PDIP-T18	1	3.937 mm	7.62 mm	Not Qualified		INVERTED	2	EXTERNAL CHARGE PUMP	NO	e3	30	260
LT1739IFE#TR	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	20	HTSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL			SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH				5 V	.65 mm	85 Cel		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified					YES	e0			6.5 mm
LT1791ACS#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR	2000 ns	EIA-422; EIA-485	9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		SMALL OUTLINE	SOP14,.25			4.75 V	1.27 mm	70 Cel	DIFFERENTIAL	0 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	1.6 Amp		1		YES	e3	30	260	8.65 mm	1.2 V	900 ns
LT1791AHS#PBF	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR	2000 ns	EIA-422; EIA-485	9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		SMALL OUTLINE	SOP14,.25			4.75 V	1.27 mm	125 Cel	DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	1.6 Amp		1		YES	e3	30	260	8.65 mm	1.2 V	900 ns
LTC1334IG#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	CMOS	4000 ns	EIA-232; EIA-422; EIA-485; EIA-562		DIFFERENTIAL SCHMITT TRIGGER	5 V		SMALL OUTLINE, SHRINK PITCH					.65 mm	85 Cel		-40 Cel	3	MATTE TIN	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified			3	CONFIGURABLE INTERFACE STANDARDS	YES	e3	30	260	10.2 mm		6000 ns
LTC1483IS8	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS	1200 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V		SMALL OUTLINE				4.75 V	1.27 mm	85 Cel	3-STATE	-40 Cel	1	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY	1	COMMON I/O; TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e0	20	235	4.9 mm		200 ns
LTC1483IS8#TR	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS	1200 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V		SMALL OUTLINE				4.75 V	1.27 mm	85 Cel	3-STATE	-40 Cel	1	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY	1	COMMON I/O; TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e0			4.9 mm		200 ns
LTC1519CS#PBF	Analog Devices	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	CMOS		EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V		SMALL OUTLINE				4.75 V	1.27 mm	70 Cel		0 Cel		MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified			4			e3	30	260	9.9 mm		22 ns
LTC1685CS8	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS	22 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V		SMALL OUTLINE				4.75 V	1.27 mm	70 Cel		0 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.752 mm	3.899 mm	Not Qualified			1		YES	e0			4.905 mm		22 ns
LTC1685CS8#TR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS	22 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V		SMALL OUTLINE				4.75 V	1.27 mm	70 Cel		0 Cel	1	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G8	1	1.752 mm	3.899 mm	Not Qualified			1		YES	e0	20	235	4.905 mm		22 ns
LTC1687CS	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS	22 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V		SMALL OUTLINE				4.75 V	1.27 mm	70 Cel		0 Cel	1	TIN LEAD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified			1		YES	e0			8.65 mm		22 ns
LTC2803CGN-1#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS	2000 ns	EIA-232-F; TIA-232-F		SCHMITT TRIGGER	3.3 V		SMALL OUTLINE, SHRINK PITCH				1.8 V	.635 mm	70 Cel		0 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.899 mm	Not Qualified			2		NO	e3	30	260	4.8895 mm		400 ns
LTC2851IMS8	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		50 ns	EIA-485-A; TIA-485-A		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				3 V	.65 mm	85 Cel		-40 Cel	1	TIN LEAD	DUAL	S-PDSO-G8		1.1 mm	3 mm	Not Qualified			1		YES	e0			3 mm		70 ns
LTC2851IS8#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	50 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		SMALL OUTLINE				3 V	1.27 mm	85 Cel		-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.752 mm	3.9 mm	Not Qualified			1		YES	e3	30	260	4.9 mm		70 ns
LTC2854CDD#TR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	10	HVSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		50 ns	EIA-485-A; TIA-485-A		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE				3 V	.5 mm	70 Cel		0 Cel	1	Tin/Lead (Sn/Pb)	DUAL	S-PDSO-N10	1	.8 mm	3 mm	Not Qualified			1		YES	e0			3 mm		70 ns
LTC2855HDE#TR	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	12	HVSON	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		50 ns	EIA-485-A; TIA-485-A		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE				3 V	.5 mm	125 Cel		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-N12	1	.8 mm	3 mm	Not Qualified			1		YES	e0			4 mm		70 ns
LTC2863CDD-1#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	CMOS	50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE				3 V	.5 mm	70 Cel		0 Cel	1	MATTE TIN	DUAL	S-PDSO-N8	1	.8 mm	3 mm				1		YES	e3	30	260	3 mm		65 ns
LTC2863CS8-1#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS	50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		SMALL OUTLINE				3 V	1.27 mm	70 Cel		0 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.752 mm	3.899 mm				1		YES	e3	30	260	4.9025 mm		65 ns
LTC2863IS8-2#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS	1500 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		SMALL OUTLINE				3 V	1.27 mm	85 Cel		-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.752 mm	3.899 mm				1		YES	e3	30	260	4.9025 mm		65 ns
LTC2877IMSE#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	10	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS	50 ns	EIA-422; EIA-485	1.2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP10,.19,20		.00002 Amp	4.5 V	.5 mm	85 Cel	DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	S-PDSO-G10		1.1 mm	3 mm		3 Amp	COMPLEMENTARY	1	ALSO OPERATE WITH 3V SUPPLY	YES	e3			3 mm		70 ns
LTC490CS8#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS	50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V		SMALL OUTLINE				4.75 V	1.27 mm	70 Cel	TOTEM-POLE	0 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	4.9 mm		150 ns
LTC491CS#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS	50 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V		SMALL OUTLINE				4.75 V	1.27 mm	70 Cel	3-STATE	0 Cel	1	MATTE TIN	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY	1	TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e3	30	260	8.65 mm		150 ns
MAX13082EASA+	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS	1800 ns	EIA-422; EIA-485	1.8 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5	SMALL OUTLINE	SOP8,.25	Line Driver or Receivers		4.5 V	1.27 mm	125 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	1 Amp		1		YES	e3	30	260	4.9 mm	2 V	200 ns
MAX13085EEPA+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	BICMOS	1000 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V		IN-LINE				4.5 V	2.54 mm	85 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T8	1	4.572 mm	7.62 mm	Not Qualified			1		YES	e3	30	260	9.375 mm		200 ns
MAX13086EASD+	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS	50 ns	EIA-422; EIA-485	1.8 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5	SMALL OUTLINE	SOP14,.25	Line Driver or Receivers		4.5 V	1.27 mm	125 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	1 Amp		1		YES	e3	30	260	8.65 mm	2 V	80 ns
MAX13086EASD+T	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS	50 ns	EIA-422; EIA-485	1.8 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5	SMALL OUTLINE	SOP14,.25	Line Driver or Receivers		4.5 V	1.27 mm	125 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	1 Amp		1		YES	e3	30	260	8.65 mm	2 V	80 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.