Analog Devices Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
LT1537CG#TR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	70 Cel		3-STATE	0 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified		INVERTED	5	EXTERNAL CHARGE PUMP	NO	e0			10.2 mm		600 ns
LT6301IFE#TR	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					5 V	.65 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified					YES	e0			9.7 mm
LT1381CS#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		2	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	70 Cel		TOTEM-POLE	0 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified		INVERTED	2	EXTERNAL CHARGE PUMP	NO	e3	30	260	9.9 mm		600 ns
PMAD231SQ	Analog Devices		MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO			CMOS							5,12		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	125 Cel			-55 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T14				Not Qualified	3.2 Amp				NO	e0				10 V
AD231SQ	Analog Devices	LINE TRANSCEIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	1	CMOS		EIA-232-C; V.28	1 mA	SCHMITT TRIGGER	5 V	13.2 V	5,12		IN-LINE	DIP14,.3	7.5 V	Line Driver or Receivers		4.5 V	2.54 mm	125 Cel	12 V		-55 Cel	2	TIN LEAD	DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified	3.2 Amp	INVERTED	2		NO	e0			19.43 mm	10 V	0 ns
AD8324ACPZ	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	3.47 V	1			GENERAL PURPOSE		STANDARD	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3.13 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N20	3	1 mm	4 mm	Not Qualified					YES	e3		260	4 mm		0 ns
AD232ASQ	Analog Devices		MILITARY	GULL WING	16	SOP	RECTANGULAR	CERAMIC	YES						10 mA		5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.0002 Amp		1.27 mm	125 Cel			-55 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-XDSO-G16				Not Qualified	3.2 Amp				NO	e0				10 V	0 ns
AD236SQ	Analog Devices	LINE TRANSCEIVER	MILITARY	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	1	CMOS		EIA-232-C; V.28	10 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers		4.5 V	2.54 mm	125 Cel			-55 Cel	4	TIN LEAD	DUAL	R-GDIP-T24		5.08 mm	7.62 mm	Not Qualified	1.6 Amp	INVERTED	3		NO	e0				10 V	0 ns
PMAD232AN	Analog Devices		INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO						10 mA		5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.0002 Amp		2.54 mm	85 Cel			-40 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T16				Not Qualified	3.2 Amp				NO	e0				10 V	0 ns
LT1281AISW	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	18	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		2	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G18	1	2.642 mm	7.493 mm	Not Qualified			2	EXTERNAL CHARGE PUMP	NO	e0			11.557 mm		600 ns
PMAD239AN	Analog Devices		INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			CMOS							5,12		IN-LINE	DIP24,.3		Line Driver or Receivers			2.54 mm	85 Cel			-40 Cel	3	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T24				Not Qualified	1.6 Amp				NO	e0				10 V
LT6301CFE#TRPBF	Analog Devices	LINE DRIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					5 V	.65 mm	70 Cel			0 Cel	2	MATTE TIN	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified					YES	e3			9.7 mm
LT6300CGN#TR	Analog Devices	LINE DRIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL					SMALL OUTLINE, SHRINK PITCH					5 V	.635 mm	70 Cel			0 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9116 mm	Not Qualified					NO	e0			4.9 mm
AD8019ARU-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	12 V		12/+-12	-12 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25		Line Driver or Receivers		4 V	.65 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G14	1	1.1 mm	4.4 mm	Not Qualified					NO	e0		240	5 mm	10.8 V	0 ns
ADM561JR-REEL	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS	1000 ns	EIA-232; TIA-232	3 mA	SCHMITT TRIGGER	3.3 V		5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers	.00004 Amp	2.97 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e0		240	17.9 mm	10 V	2000 ns
AD236JR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		EIA-232-C; V.28	10 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel	4	TIN LEAD	DUAL	R-PDSO-G24		2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	3		NO	e0			15.4 mm	10 V	0 ns
AD8323ARUZ-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1					DIFFERENTIAL	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.75 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G28	1	1.1 mm	4.4 mm	Not Qualified					YES	e3		260	9.7 mm		0 ns
ADM561JRSZ-REEL	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS	1000 ns	EIA-232; TIA-232	3 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		2.97 V	.65 mm	70 Cel		TOTEM-POLE	0 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e3		260	10.2 mm	10 V	2000 ns
AD402	Analog Devices		COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BICMOS							5,+-12		IN-LINE	DIP24,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T24				Not Qualified	1.6 Amp				NO	e0				12 V
LT1537CG#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	70 Cel		3-STATE	0 Cel	3	MATTE TIN	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified		INVERTED	5	EXTERNAL CHARGE PUMP	NO	e3			10.2 mm		600 ns
AD7306JN	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BICMOS	100 ns	EIA-232; EIA-422	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	3	TIN LEAD	DUAL	R-PDIP-T24		5.33 mm	7.62 mm	Not Qualified	4 Amp	COMPLEMENTARY	2	CONFIGURABLE INTERFACE STANDARDS; EXTERNAL CHARGE PUMP	YES	e0			30.485 mm	10 V	200 ns
PMAD238AQ	Analog Devices		INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC	NO			CMOS			10 mA		5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers			2.54 mm	85 Cel			-40 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T24				Not Qualified	1.6 Amp				NO	e0				10 V
AD8323ARUZ	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1					DIFFERENTIAL	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.75 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G28	1	1.1 mm	4.4 mm	Not Qualified					YES	e3		260	9.7 mm		0 ns
LT1330CSW#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER					SMALL OUTLINE						1.27 mm	70 Cel			0 Cel	3	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified			5	IT ALSO WORKS AT 5 VOLTS; ONE RECEIVER ACTIVE IN SHUT DOWN	NO	e3	30	260	17.9 mm		600 ns
PMAD232JN	Analog Devices		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO						10 mA		5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.0002 Amp		2.54 mm	70 Cel			0 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T16				Not Qualified	3.2 Amp				NO	e0				10 V	0 ns
PMAD234JN	Analog Devices		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			CMOS					5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T16				Not Qualified					NO	e0				10 V
AD8019AR-REEL7	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	12 V		12/+-12	-12 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4 V	1.27 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G8	1	2.59 mm	3.9 mm	Not Qualified					NO	e0		240	4.9 mm	10.8 V	0 ns
LT1281ACN	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		2	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V				IN-LINE						2.54 mm	70 Cel		TOTEM-POLE	0 Cel	2	TIN LEAD	DUAL	R-PDIP-T16	1	3.937 mm	7.62 mm	Not Qualified		INVERTED	2	EXTERNAL CHARGE PUMP	NO	e0					600 ns
LT1341CJ	Analog Devices		COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR			17 mA		5 V		5		IN-LINE	DIP28,.6		Line Driver or Receivers	.00002 Amp		2.54 mm	70 Cel			0 Cel	3	Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T28				Not Qualified	1.6 Amp				NO	e0				10 V	600 ns
PMAD233AN	Analog Devices		INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO						10 mA		5 V		5		IN-LINE	DIP20,.3		Line Driver or Receivers			2.54 mm	85 Cel			-40 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T20				Not Qualified	1.6 Amp				NO	e0				10 V
PMAD230JR	Analog Devices		COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS					5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers			1.27 mm	70 Cel			0 Cel	5	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G20				Not Qualified					NO	e0				10 V
AD8324ACP-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	3.47 V	1			GENERAL PURPOSE		STANDARD	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3.13 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N20		1 mm	4 mm	Not Qualified					YES	e0			4 mm		0 ns
AD230JR	Analog Devices	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		5	CMOS		EIA-232-C; V.28		STANDARD	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers			1.27 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified		INVERTED			NO	e0			12.8 mm	10 V	0 ns
LT1331CG	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR	1300 ns	EIA-232; EIA-562		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	70 Cel	5 V	3-STATE	0 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified		INVERTED	5	CAN ALSO OPERATE WITH 5V SUPPLY	NO	e0			10.2 mm		600 ns
AD234SQ	Analog Devices	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4	CMOS	10000 ns	EIA-232-C; V.28	10 mA	STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.5 V	2.54 mm	125 Cel			-55 Cel	1	TIN LEAD	DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified		INVERTED			NO	e0				10 V	0 ns
PMAD230AR	Analog Devices		INDUSTRIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS					5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers			1.27 mm	85 Cel			-40 Cel	5	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G20				Not Qualified					NO	e0				10 V
PMAD239AR	Analog Devices		INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS							5,12		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers			1.27 mm	85 Cel			-40 Cel	3	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G24				Not Qualified	1.6 Amp				NO	e0				10 V
ADM5170AP	Analog Devices	LINE DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1	CMOS	15 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.000001 Amp	9 V	1.27 mm	85 Cel		3-STATE	-40 Cel	8	TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e0		225	11.505 mm	9 V	0 ns
ADLD8404ACPZ-R7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES		2			GENERAL PURPOSE		DIFFERENTIAL	14 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE						.5 mm	85 Cel			-40 Cel	2		QUAD	S-XQCC-N24		.8 mm	4 mm	Not Qualified					NO				4 mm
AD8324JRQZ	Analog Devices	LINE DRIVER	OTHER	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.47 V	1			GENERAL PURPOSE		STANDARD	3.3 V				SMALL OUTLINE, SHRINK PITCH					3.13 V	.635 mm	70 Cel			-25 Cel	1	MATTE TIN	DUAL	R-PDSO-G20	1	1.7526 mm	3.9116 mm	Not Qualified					YES	e3		260	8.6614 mm		0 ns
LT1281ACSW#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		2	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	70 Cel			0 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified			1		NO	e3	30	260	10.3 mm		600 ns
PMAD230AN	Analog Devices		INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			CMOS					5 V		5		IN-LINE	DIP20,.3		Line Driver or Receivers			2.54 mm	85 Cel			-40 Cel	5	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T20				Not Qualified					NO	e0				10 V
LT3669IUFD-2#PBF	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	28	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	40 V	1	BIPOLAR	6000 ns	GENERAL PURPOSE	6 mA	SCHMITT TRIGGER	24 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.16X.2,20				7.5 V	.5 mm	125 Cel		OPEN-COLLECTOR	-40 Cel	2	Matte Tin (Sn) - annealed	QUAD	R-PQCC-N28		.8 mm	4 mm				1		NO	e3			5 mm		6500 ns
ADM5170JN	Analog Devices	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	11 V	1	CMOS	15 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V		+-10	-10 V	IN-LINE	DIP28,.6		Line Driver or Receivers	.000001 Amp	9 V	2.54 mm	70 Cel		3-STATE	0 Cel	8	TIN LEAD	DUAL	R-PDIP-T28		6.35 mm	15.24 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e0			37.4 mm	9 V	0 ns
AD232AR	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS		EIA-232-C; V.28	10 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers	.0002 Amp	4.5 V	1.27 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G16		2.65 mm	7.5 mm	Not Qualified	3.2 Amp	INVERTED	2		NO	e0			10.3 mm	10 V	0 ns
LT1237CNW#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		3	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V				IN-LINE						2.54 mm	70 Cel			0 Cel	3	MATTE TIN	DUAL	R-PDIP-T28	1	4.318 mm	15.24 mm	Not Qualified			5		NO	e3					600 ns
LT1342CNW#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		3	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	3 V				IN-LINE						2.54 mm	70 Cel			0 Cel	3	MATTE TIN	DUAL	R-PDIP-T28	1	4.318 mm	15.24 mm	Not Qualified			5	ONE RECEIVER ACTIVE IN SHUT DOWN	NO	e3					3000 ns
PMAD239JR	Analog Devices		COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS							5,12		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers			1.27 mm	70 Cel			0 Cel	3	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G24				Not Qualified	1.6 Amp				NO	e0				10 V

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.