Analog Devices Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
AD230JN	Analog Devices	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		5	CMOS			EIA-232-C; V.28		STANDARD	5 V	5		IN-LINE	DIP20,.3	Line Driver or Receivers			2.54 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDIP-T20		5.33 mm	7.62 mm	Not Qualified		INVERTED			NO	e0			25.2 mm	10 V	0 ns
AD45048AR	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	12.6 V	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	6 V	+-6/+-12	-6 V	SMALL OUTLINE	SOP8,.25	Line Driver or Receivers		1.5 V	1.27 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified					NO	e0			4.9 mm	11.25 V	0 ns
PMAD239SQ	Analog Devices		MILITARY	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC	NO			CMOS							5,12		IN-LINE	DIP24,.3	Line Driver or Receivers			2.54 mm	125 Cel			-55 Cel	3	Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T24				Not Qualified	1.6 Amp				NO	e0				10 V
PMAD236JR	Analog Devices		COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS				10 mA		5 V	5		SMALL OUTLINE	SOP24,.4	Line Driver or Receivers			1.27 mm	70 Cel			0 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G24				Not Qualified	1.6 Amp				NO	e0				10 V
LT1280ACSW	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	18	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		2	BIPOLAR		1300 ns	EIA-232		SCHMITT TRIGGER	5 V			SMALL OUTLINE					1.27 mm	70 Cel			0 Cel	2	TIN LEAD	DUAL	R-PDSO-G18	1	2.642 mm	7.493 mm	Not Qualified			2	EXTERNAL CHARGE PUMP	NO	e0			11.557 mm		600 ns
PMAD231AN	Analog Devices		INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			CMOS							5,12		IN-LINE	DIP14,.3	Line Driver or Receivers			2.54 mm	85 Cel			-40 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T14				Not Qualified	3.2 Amp				NO	e0				10 V
LT1330CSW	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR		1300 ns	EIA-232		SCHMITT TRIGGER	3 V			SMALL OUTLINE					1.27 mm	70 Cel	5 V		0 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified			5	ONE RECEIVER ACTIVE IN SHUT DOWN	NO	e0			17.9 mm		600 ns
ADM5170APZ-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1	CMOS		15000 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V	+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ	Line Driver or Receivers	.000001 Amp	9 V	1.27 mm	85 Cel		3-STATE	-40 Cel	8	MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e3		260	11.505 mm	9 V	0 ns
PMAD238AN	Analog Devices		INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			CMOS				10 mA		5 V	5		IN-LINE	DIP24,.3	Line Driver or Receivers			2.54 mm	85 Cel			-40 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T24				Not Qualified	1.6 Amp				NO	e0				10 V
AD8326ARP	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	28	HSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12.6 V	1				GENERAL PURPOSE		STANDARD	12 V			SMALL OUTLINE, HEAT SINK/SLUG				11.4 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G28	3	2.49 mm	7.5 mm	Not Qualified					YES	e0			17.935 mm		0 ns
AD45048AR-REEL7	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	12.6 V	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	6 V	+-6/+-12	-6 V	SMALL OUTLINE	SOP8,.25	Line Driver or Receivers		1.5 V	1.27 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified					NO	e0			4.9 mm	11.25 V	0 ns
AD8324ACPZ-REEL7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	3.47 V	1				GENERAL PURPOSE		STANDARD	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				3.13 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N20	3	1 mm	4 mm	Not Qualified					YES	e3		260	4 mm		0 ns
AD8398AACPZ-RL	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES		2				GENERAL PURPOSE		DIFFERENTIAL	6 V	+-6/12	-6 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Line Driver or Receivers			.65 mm	85 Cel			-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N16	3	.8 mm	4 mm	Not Qualified				IT ALSO NEED 12V SUPPLY	NO	e3	30	260	4 mm	17.6 V	0 ns
LT3669HUFD#TRPBF	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	28	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	40 V	1	BIPOLAR		6000 ns	GENERAL PURPOSE	6 mA	SCHMITT TRIGGER	24 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.16X.2,20			7.5 V	.5 mm	150 Cel		OPEN-COLLECTOR	-40 Cel	2	Matte Tin (Sn) - annealed	QUAD	R-PQCC-N28	1	.8 mm	4 mm				1		NO	e3		260	5 mm		6500 ns
MAX9275GTN+	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	56	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS						1.8 V	1.8		CHIP CARRIER	LCC56,.31SQ,20	Line Driver or Receivers			.5 mm	105 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N56	3			Not Qualified						e3	30	260			0 ns
MAX9260GCB/V+WGG4	Analog Devices	LINE RECEIVER																														Matte Tin (Sn) - annealed			3									e3	30	260
MAX9205EAI+T	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	45 mA	STANDARD	3.3 V	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified					YES	e3	30	260	10.2 mm		0 ns
MAXM22510GLH+T	Analog Devices	LINE TRANSCEIVER																																											NOT SPECIFIED	NOT SPECIFIED
MAX9248GCM+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	QFP	SQUARE	PLASTIC/EPOXY	YES			CMOS				120 mA		3.3 V	3.3		FLATPACK	QFP48,.35SQ,20	Line Driver or Receivers			.5 mm	105 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1			Not Qualified						e3	30	260
MAX9248GCM+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	120 mA	STANDARD	3.3 V	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	105 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1	ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm		0 ns
MAX9164ESD-T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		7 ns	EIA-644; TIA-644		DIFFERENTIAL	3.3 V			SMALL OUTLINE				3 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified			1		YES	e0			8.65 mm		9 ns
MAX9258AGCM/V+TW	Analog Devices	LINE RECEIVER																														Matte Tin (Sn) - annealed			1									e3	30	260
DS1275S	Analog Devices		COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS				5 mA		5 V	5		SMALL OUTLINE	SOP8,.25	Line Driver or Receivers			1.27 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDSO-G8				Not Qualified	3.2 Amp				NO	e0				12 V
MAX96706GTJ+T	Analog Devices	LINE RECEIVER		NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	1.9 V	1		AEC-Q100		ISO 10605		DIFFERENTIAL	1.8 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20			1.7 V	.5 mm	115 Cel		OPEN-DRAIN	-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N32	1	.8 mm	5 mm		2 Amp		1		NO	e3	30	260	5 mm
MAX9282GTM+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS			I2C	.3 mA	DIFFERENTIAL	3.3 V			CHIP CARRIER, HEAT SINK/SLUG	LCC48,.28SQ,20			3 V	.5 mm	105 Cel		3-STATE	-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm	Not Qualified		TRUE	1		YES	e3	30	260	7 mm
MAX9273GTL/V+	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	40	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS	AEC-Q100			75 mA			1.8,1.8/3.3		CHIP CARRIER	LCC40,.24SQ,20	Line Driver or Receivers			.5 mm	105 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N40	1			Not Qualified						e3	30	260			0 ns
MAX9205EAI/V+	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	10	CMOS	AEC-Q100		GENERAL PURPOSE	45 mA	STANDARD	3.3 V	3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	10	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified					YES	e3	30	260	10.2 mm		0 ns
MAX9153EUI+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-644; TIA-644		DIFFERENTIAL	3.3 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	10	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.1 mm	4.4 mm	Not Qualified			1		YES	e3	30	260	9.7 mm		0 ns
MAX9268GCM/V+TGG5	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			ISO 10605	280 mA	DIFFERENTIAL	3.3 V			FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP48,.35SQ		.00001 Amp	3 V	.5 mm	105 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	3	1.2 mm	7 mm		2 Amp	COMPLEMENTARY	1		NO	e3	30	260	7 mm	.25 V
MAX9277GTM/VY+T	Analog Devices	LINE DRIVER																														Matte Tin (Sn) - annealed			1									e3	30	260
MAX9258AGCM/V+T	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	QFP	SQUARE	PLASTIC/EPOXY	YES			BICMOS	AEC-Q100					3.3 V	3.3		FLATPACK	QFP48,.35SQ,20	Line Driver or Receivers			.5 mm	105 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1			Not Qualified						e3	30	260
MAX9263GCB/V+TW	Analog Devices	LINE DRIVER																														Matte Tin (Sn) - annealed			3									e3	30	260
MAX9265GCM/V+TWGG5	Analog Devices	LINE DRIVER																														Matte Tin (Sn) - annealed			3									e3	30	260
MAX9278AGGM/VY+	Analog Devices	LINE RECEIVER																																											NOT SPECIFIED	NOT SPECIFIED
MAX96700GTJ/V+T	Analog Devices																															Matte Tin (Sn) - annealed			1									e3	30	260
MAX9248GCM/V+TGB	Analog Devices	LINE RECEIVER																																	1
MAX9172EKA+	Analog Devices		INDUSTRIAL	GULL WING	8	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES							9 mA		3.3 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.1	Line Driver or Receivers			.635 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1			Not Qualified	4 Amp					e3	30	260			0 ns
MAX9172ETA	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	3.6 V	2	CMOS			EIA-644; TIA-644	9 mA	DIFFERENTIAL	3.3 V	3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,25	Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	S-XDSO-N8	1	.8 mm	3 mm	Not Qualified	4 Amp		2			e0			3 mm		2.5 ns
MAX9240AGTM+	Analog Devices	LINE RECEIVER																														Matte Tin (Sn) - annealed			1									e3	30	260
MAX9264GCB/V+	Analog Devices	LINE DRIVER																														Matte Tin (Sn) - annealed			3									e3	30	260
MAX9266GCM/V+TW	Analog Devices	LINE DRIVER																														Matte Tin (Sn) - annealed			3									e3	30	260
MAX9257AGCM/V+GB	Analog Devices	LINE DRIVER																																	1
MAX9259GTN/V+W	Analog Devices	LINE DRIVER																														Matte Tin (Sn) - annealed			3									e3	30	260
MAX9259GTN/V+	Analog Devices	LINE DRIVER																														Matte Tin (Sn) - annealed			3									e3	30	260
MAX9242GUM	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-644; TIA-644		STANDARD	3.3 V	3.3,3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	Line Driver or Receivers		3 V	.5 mm	105 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G48	3	1.1 mm	6.1 mm	Not Qualified					YES	e0			12.5 mm		0 ns
MAX96706GTJ/VY+T	Analog Devices																															Matte Tin (Sn) - annealed			1									e3	30	260
MAX9263GCB/V+	Analog Devices	LINE DRIVER																														Matte Tin (Sn) - annealed			3									e3	30	260
MAX9279GTN/V+T	Analog Devices		INDUSTRIAL	NO LEAD	56	QCCN	SQUARE	PLASTIC	YES			CMOS	AEC-Q100					1.8 V	1.8		CHIP CARRIER	LCC56,.31SQ,20	Line Driver or Receivers			.5 mm	105 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N56	3			Not Qualified						e3	30	260

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.