Analog Devices Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
MAX9276AGGN/VY+T	Analog Devices	LINE RECEIVER																												Matte Tin (Sn) - annealed			3									e3	30	260
MAX9278AGTM/V+T	Analog Devices	LINE RECEIVER																												Matte Tin (Sn) - annealed			1									e3	30	260
MAX9248ECM+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	120 mA	STANDARD	3.3 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1	ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm		0 ns
MAX9113ESA/V+T	Analog Devices	LINE RECEIVER																																									NOT SPECIFIED	NOT SPECIFIED
MAX9321BESA+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			.245 ns	GENERAL PURPOSE		DIFFERENTIAL	5 V		SMALL OUTLINE				3 V	1.27 mm	85 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			1	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY	YES	e3	30	260	4.9 mm		.245 ns
MAX96708GTJ/V+	Analog Devices	LINE RECEIVER																												Matte Tin (Sn) - annealed			1									e3	30	260
MAX9153EUI+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-644; TIA-644		DIFFERENTIAL	3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Line Driver or Receivers		3 V	.65 mm	85 Cel		-40 Cel	10	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.1 mm	4.4 mm	Not Qualified			1		YES	e3	30	260	9.7 mm		0 ns
MAX9947ETE+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	1	BICMOS		5000 ns	EIA-485	20 mA	SCHMITT TRIGGER	5 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20			3 V	.5 mm	105 Cel	OPEN-DRAIN	-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N16	1	.8 mm	3 mm		3.3 Amp	TRUE	1		NO	e3	30	260	3 mm		11000 ns
MAX9282GTM/VY+	Analog Devices	LINE RECEIVER																																									30	260
MAX9259GTN/V+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	56	HVQCCN	SQUARE	UNSPECIFIED	YES	1.9 V	1	CMOS			ISO 10605		STANDARD	1.8 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				1.7 V	.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N56	3	.8 mm	8 mm	Not Qualified			1		YES	e3	30	260	8 mm
MAX9257AGTL/V+TW	Analog Devices	LINE DRIVER																												Matte Tin (Sn) - annealed			1									e3	30	260
MAX9273GTL+T	Analog Devices		INDUSTRIAL	NO LEAD	40	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS				75 mA			1.8,1.8/3.3	CHIP CARRIER	LCC40,.24SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N40	1			Not Qualified						e3	30	260
MAX9257AGCM/V+W	Analog Devices	LINE DRIVER																												Matte Tin (Sn) - annealed			1									e3	30	260
MAX9250ECM/V+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100		GENERAL PURPOSE	120 mA	STANDARD	3.3 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1	ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm		0 ns
MAX9280AGTN+T	Analog Devices	LINE RECEIVER																												Matte Tin (Sn) - annealed			3									e3	30	260
MAX9273GTL/V+T	Analog Devices		INDUSTRIAL	NO LEAD	40	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS	AEC-Q100			75 mA			1.8,1.8/3.3	CHIP CARRIER	LCC40,.24SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N40	1			Not Qualified						e3	30	260
MAX96724RGTN/V+	Analog Devices	LINE RECEIVER
MAX9277GTM+T	Analog Devices		INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS				195 mA			1.8,1.8/3.3	CHIP CARRIER	LCC48,.27SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N48	1			Not Qualified						e3	30	260
MAX96706GTJ/V+	Analog Devices	LINE RECEIVER		NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	1.9 V	1		AEC-Q100		ISO 10605		DIFFERENTIAL	1.8 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20			1.7 V	.5 mm	115 Cel	OPEN-DRAIN	-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N32	1	.8 mm	5 mm		2 Amp		1		NO	e3	30	260	5 mm
MAX9217ETM+T	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS			GENERAL PURPOSE	70 mA	STANDARD	3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16	Line Driver or Receivers		3 V	.4 mm	85 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	6 mm	Not Qualified					YES	e3	30	260	6 mm		0 ns
MAX9247ECM+	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	75 mA	STANDARD	3.3 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1	ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm		0 ns
MAX96708GTJ+	Analog Devices	LINE RECEIVER																												Matte Tin (Sn) - annealed			1									e3	30	260
MAX9280AGTN+	Analog Devices	LINE RECEIVER																												Matte Tin (Sn) - annealed			3									e3	30	260
MAX9172ESA+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	CMOS			EIA-644; TIA-644	9 mA	DIFFERENTIAL	3.3 V	3.3	SMALL OUTLINE	SOP8,.25	Line Driver or Receivers		3 V	1.27 mm	85 Cel		-40 Cel		Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		2			e3	30	260	4.9 mm		2.5 ns
MAX9257AGTL/V+	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	BICMOS	AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.2SQ,16	Line Driver or Receivers		3 V	.4 mm	105 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N40	1	.8 mm	5 mm	Not Qualified			1			e3	30	260	5 mm		0 ns
MAX9213ETM+	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3	CMOS			EIA-644; TIA-644		STANDARD	3.3 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				3 V	.5 mm	85 Cel		-40 Cel	3	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm	Not Qualified					YES	e3	30	260	7 mm
MAX9113ASA/V+	Analog Devices	LINE RECEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	CMOS	AEC-Q100		EIA-644; TIA-644	11 mA	DIFFERENTIAL	3.3 V	3.3	SMALL OUTLINE	SOP8,.25	Line Driver or Receivers		3 V	1.27 mm	125 Cel		-40 Cel		Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		2		NO	e3	30	260	4.9 mm		2.5 ns
MAX562EWI+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS		1700 ns	EIA-232; EIA-562	33 mA	SCHMITT TRIGGER	5 V	3/5	SMALL OUTLINE	SOP28,.4	Line Driver or Receivers		2.7 V	1.27 mm	85 Cel	3-STATE	-40 Cel	3	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5	5 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS	NO	e3	30	260	17.9 mm	7.4 V	500 ns
MAX9247GCM+T	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	75 mA	STANDARD	3.3 V		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20		.00002 Amp	3 V	.5 mm	105 Cel	DIFFERENTIAL	-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm			COMPLEMENTARY			YES	e3	30	260	7 mm	.25 V
MAX9247ECM+T	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS				75 mA	STANDARD	3.3 V	3.3	FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified					YES	e3	30	260	7 mm		0 ns
MAX9248ECM/V+TGB	Analog Devices	LINE RECEIVER																															1
MAX9247GCM/V+GB	Analog Devices	LINE DRIVER																															1
MAX9259GCB/V+GB	Analog Devices	LINE DRIVER																												Matte Tin (Sn) - annealed			3									e3	30	260
MAX9249GCM/V+TG2C	Analog Devices	LINE RECEIVER																												Matte Tin (Sn) - annealed			3									e3	30	260
MAX9113ASA	Analog Devices	LINE RECEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	CMOS			EIA-644; TIA-644	11 mA	DIFFERENTIAL	3.3 V	3.3	SMALL OUTLINE	SOP8,.25	Line Driver or Receivers		3 V	1.27 mm	125 Cel		-40 Cel			DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		2		NO				4.9 mm		2.5 ns
MAX9271GTJ+	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS			ISO 10605	75 mA		1.8 V	1.8	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Line Driver or Receivers		1.7 V	.5 mm	105 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N32	1	.8 mm	5 mm	Not Qualified					YES	e3	30	260	5 mm		0 ns
MAX9278GTM/V+	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS	AEC-Q100		I2C	.3 mA	DIFFERENTIAL	3.3 V		CHIP CARRIER, HEAT SINK/SLUG	LCC48,.28SQ,20			3 V	.5 mm	105 Cel	3-STATE	-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm			TRUE	1		YES	e3	30	260	7 mm
MAX9280AGTN/V+	Analog Devices	LINE RECEIVER																												Matte Tin (Sn) - annealed			3									e3	30	260
MAX9281GTM+T	Analog Devices		INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS				195 mA			1.8,1.8/3.3	CHIP CARRIER	LCC48,.27SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N48	1			Not Qualified						e3	30	260
MAX9150EUI+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		3.5 ns	EIA-644; TIA-644		DIFFERENTIAL	3.3 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	Line Driver or Receivers		3 V	.65 mm	85 Cel		-40 Cel	10	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G28	1	1.1 mm	4.4 mm	Not Qualified			1		YES	e3	30	260	9.7 mm		3.5 ns
MAX9259GCB/V+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	64	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	1.9 V	1	CMOS			ISO 10605		STANDARD	1.8 V		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH				1.7 V	.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified			1		YES	e3	30	260	10 mm
DS2480BS/T&R	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				EIA-232-C		GATED	5 V		SMALL OUTLINE				4.5 V		85 Cel		-40 Cel	1		DUAL	R-PDSO-G8				Not Qualified			1		NO		NOT SPECIFIED	NOT SPECIFIED			0 ns
MAX9282GTM/V+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS	AEC-Q100		I2C	.3 mA	DIFFERENTIAL	3.3 V		CHIP CARRIER, HEAT SINK/SLUG	LCC48,.28SQ,20			3 V	.5 mm	105 Cel	3-STATE	-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm	Not Qualified		TRUE	1		YES	e3	30	260	7 mm
MAX9258AGCM/V+GB	Analog Devices	LINE RECEIVER																															1
MAX9258AGCM/V+TGB	Analog Devices	LINE RECEIVER																															1
MAX9277GTM/V+T	Analog Devices		INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS	AEC-Q100			195 mA			1.8,1.8/3.3	CHIP CARRIER	LCC48,.27SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N48	1			Not Qualified						e3	30	260
MAX9276AGTN+	Analog Devices	LINE RECEIVER																												Matte Tin (Sn) - annealed			3									e3	30	260
MAX9244GUM	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-644; TIA-644		STANDARD	3.3 V	3.3,3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	Line Driver or Receivers		3 V	.5 mm	105 Cel		-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G48	3	1.1 mm	6.1 mm	Not Qualified					YES	e0			12.5 mm		0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.