Analog Devices Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
ADM5170ANZ	Analog Devices	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	11 V	1	CMOS	15000 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V		+-10	-10 V	IN-LINE	DIP28,.6		Line Driver or Receivers	.000001 Amp	9 V	2.54 mm	85 Cel		3-STATE	-40 Cel	8	MATTE TIN	DUAL	R-PDIP-T28		6.35 mm	15.24 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e3			37.4 mm	9 V	0 ns
PMAD236AQ	Analog Devices		INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC	NO			CMOS			10 mA		5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers			2.54 mm	85 Cel			-40 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T24				Not Qualified	1.6 Amp				NO	e0				10 V
ADM5180APZ	Analog Devices	LINE RECEIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				CHIP CARRIER					4.75 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel		MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified		TRUE	8		NO	e3		260	11.505 mm		550 ns
LT6300CGN#TRPBF	Analog Devices	LINE DRIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL					SMALL OUTLINE, SHRINK PITCH					5 V	.635 mm	70 Cel			0 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9116 mm	Not Qualified					NO	e3	30	260	4.9 mm
LT1381CS	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		2	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	70 Cel		TOTEM-POLE	0 Cel	2	TIN LEAD	DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		INVERTED	2	EXTERNAL CHARGE PUMP	NO	e0			9.9 mm		600 ns
PMAD232AQ	Analog Devices		INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO						10 mA		5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.0002 Amp		2.54 mm	85 Cel			-40 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T16				Not Qualified	3.2 Amp				NO	e0				10 V	0 ns
LT1237CG#TR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	70 Cel		3-STATE	0 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified		INVERTED	5	1 RECEIVER ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP	NO	e0			10.2 mm		600 ns
PMAD234AN	Analog Devices		INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			CMOS					5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	85 Cel			-40 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T16				Not Qualified					NO	e0				10 V
AD7306AR	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS	100 ns	EIA-232; EIA-422	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	3	TIN LEAD	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	4 Amp	COMPLEMENTARY	2	CONFIGURABLE INTERFACE STANDARDS; EXTERNAL CHARGE PUMP	YES	e0		240	15.4 mm	10 V	200 ns
AD232AARN	Analog Devices		INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES						10 mA		5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.0002 Amp		1.27 mm	85 Cel			-40 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G16				Not Qualified	3.2 Amp				NO	e0				10 V	0 ns
AD231JN	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	CMOS		EIA-232-C; V.28	1 mA	SCHMITT TRIGGER	5 V	13.2 V	5,12		IN-LINE	DIP14,.3	7.5 V	Line Driver or Receivers		4.5 V	2.54 mm	70 Cel	12 V		0 Cel	2	TIN LEAD	DUAL	R-PDIP-T14		5.33 mm	7.62 mm	Not Qualified	3.2 Amp	INVERTED	2		NO	e0			19.305 mm	10 V	0 ns
LT1237CSW#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	70 Cel			0 Cel	3	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified			5		NO	e3	30	260	17.9 mm		600 ns
AD8391AR-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2	BIPOLAR		GENERAL PURPOSE		STANDARD			3/12		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel		OPEN-EMITTER	-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified					NO	e0		240	4.9 mm	.1 V	0 ns
AD8328ACP-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	VQCCN	SQUARE	UNSPECIFIED	YES	5.25 V	1			GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, VERY THIN PROFILE					4.75 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N20	3	1 mm	4 mm	Not Qualified					YES	e0		240	4 mm		0 ns
LT1341CG#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	70 Cel		3-STATE	0 Cel	3	MATTE TIN	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified		INVERTED	5	5 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP	NO	e3	30	260	10.2 mm		600 ns
AD239AN	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	CMOS		EIA-232-C; V.28	1 mA	SCHMITT TRIGGER	5 V	13.2 V	5,12		IN-LINE	DIP24,.3	10.8 V	Line Driver or Receivers		4.5 V	2.54 mm	85 Cel	12 V		-40 Cel	3	TIN LEAD	DUAL	R-PDIP-T24		5.33 mm	7.62 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e0			30.45 mm	10 V	0 ns
LT3669IUFD#TRPBF	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	28	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	40 V	1	BIPOLAR	6000 ns	GENERAL PURPOSE	6 mA	SCHMITT TRIGGER	24 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.16X.2,20				7.5 V	.5 mm	125 Cel		OPEN-COLLECTOR	-40 Cel	2	Matte Tin (Sn) - annealed	QUAD	R-PQCC-N28	1	.8 mm	4 mm				1		NO	e3		260	5 mm		6500 ns
AD8324JRQZ-REEL	Analog Devices	LINE DRIVER	OTHER	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.47 V	1			GENERAL PURPOSE		STANDARD	3.3 V				SMALL OUTLINE, SHRINK PITCH					3.13 V	.635 mm	70 Cel			-25 Cel	1	MATTE TIN	DUAL	R-PDSO-G20	1	1.7526 mm	3.9116 mm	Not Qualified					YES	e3		260	8.6614 mm		0 ns
LT1342IJ	Analog Devices		INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR			17 mA				3.3,5		IN-LINE	DIP28,.6		Line Driver or Receivers	.00002 Amp		2.54 mm	85 Cel			-40 Cel	3	Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T28				Not Qualified	1.6 Amp				NO	e0				10 V	600 ns
LT1237CG	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	70 Cel		3-STATE	0 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified		INVERTED	5	1 RECEIVER ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP	NO	e0			10.2 mm		600 ns
AD237JR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	CMOS		EIA-232-C; V.28	10 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers			1.27 mm	70 Cel			0 Cel	5	TIN LEAD	DUAL	R-PDSO-G24		2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	3		NO	e0			15.4 mm	10 V	0 ns
ADM561JR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS	1000 ns	EIA-232; TIA-232	3 mA	SCHMITT TRIGGER	3.3 V		5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers	.00004 Amp	2.97 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e0		240	17.9 mm	10 V	2000 ns
PMAD231JN	Analog Devices		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			CMOS							5,12		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T14				Not Qualified	3.2 Amp				NO	e0				10 V
AD8019AR	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	12 V		12/+-12	-12 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4 V	1.27 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G8	1	2.59 mm	3.9 mm	Not Qualified					NO	e0		240	4.9 mm	10.8 V	0 ns
ADM5180AP-REEL	Analog Devices	LINE RECEIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel		TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified	4 Amp	TRUE	8		NO	e0		225	11.505 mm		550 ns
LT6301CFE#TR	Analog Devices	LINE DRIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL					SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					5 V	.65 mm	70 Cel			0 Cel	2	TIN LEAD	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified					YES	e0			9.7 mm
LT1330CG	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	3 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	70 Cel	5 V	3-STATE	0 Cel	3	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified		INVERTED	5	1 RECEIVER ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP	NO	e0			10.2 mm		600 ns
AD8323ARU	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1					DIFFERENTIAL	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.75 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G28	1	1.1 mm	4.4 mm	Not Qualified					YES	e0		240	9.7 mm		0 ns
AD7306JRZ	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS	100 ns	EIA-232; EIA-422	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	3	MATTE TIN	DUAL	R-PDSO-G24	1	2.65 mm	7.5 mm	Not Qualified	4 Amp	COMPLEMENTARY	2	CONFIGURABLE INTERFACE STANDARDS; EXTERNAL CHARGE PUMP	YES	e3	30	260	15.4 mm	10 V	200 ns
LT1341CG#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	70 Cel		3-STATE	0 Cel	3	MATTE TIN	DUAL	R-PDSO-G28		2 mm	5.3 mm	Not Qualified		INVERTED	5	5 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP	NO	e3			10.2 mm		600 ns
PMAD230JN	Analog Devices		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			CMOS					5 V		5		IN-LINE	DIP20,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel	5	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T20				Not Qualified					NO	e0				10 V
PMAD238JR	Analog Devices		COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS			10 mA		5 V		5		SMALL OUTLINE	SOP24,.4		Line Driver or Receivers			1.27 mm	70 Cel			0 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G24				Not Qualified	1.6 Amp				NO	e0				10 V
ADM560JRS-REEL	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS	1000 ns	EIA-232; TIA-232	3 mA	SCHMITT TRIGGER	3.3 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers	.00004 Amp	2.97 V	.65 mm	70 Cel		TOTEM-POLE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e0		240	10.2 mm	10 V	2000 ns
LT1280ACSW#TR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	18	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		2	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDSO-G18	1	2.65 mm	7.5 mm	Not Qualified			1		NO	e0			11.55 mm		600 ns
AD238AQ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	1	CMOS		EIA-232-C; V.28	10 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel			-40 Cel	4	TIN LEAD	DUAL	R-GDIP-T24		5.08 mm	7.62 mm	Not Qualified	1.6 Amp	INVERTED	4		NO	e0				10 V	0 ns
ADM5180ANZ	Analog Devices	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BICMOS		EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel		MATTE TIN	DUAL	R-PDIP-T28		6.35 mm	15.24 mm	Not Qualified		TRUE	8		NO	e3			37.4 mm		550 ns
PMAD238JN	Analog Devices		COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			CMOS			10 mA		5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T24				Not Qualified	1.6 Amp				NO	e0				10 V
ADM561JRSZ	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS	1000 ns	EIA-232; TIA-232	3 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		2.97 V	.65 mm	70 Cel		TOTEM-POLE	0 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e3		260	10.2 mm	10 V	2000 ns
PMAD236AN	Analog Devices		INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			CMOS			10 mA		5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers			2.54 mm	85 Cel			-40 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T24				Not Qualified	1.6 Amp				NO	e0				10 V
ADM560JRZ	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS	1000 ns	EIA-232; TIA-232	3 mA	SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers		2.97 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e3		260	17.9 mm	10 V	2000 ns
PMAD231JR	Analog Devices		COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS							5,12		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers			1.27 mm	70 Cel			0 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G16				Not Qualified	3.2 Amp				NO	e0				10 V
LT1331CG#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR	1300 ns	EIA-232; EIA-562		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, SHRINK PITCH						.65 mm	70 Cel	5 V	3-STATE	0 Cel	3	MATTE TIN	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified		INVERTED	5	CAN ALSO OPERATE WITH 5V SUPPLY	NO	e3	30	260	10.2 mm		600 ns
ADM5180JPZ	Analog Devices	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				CHIP CARRIER					4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel		MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified		TRUE	8		NO	e3		260	11.505 mm		550 ns
LT6300CGN	Analog Devices	LINE DRIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL					SMALL OUTLINE, SHRINK PITCH					5 V	.635 mm	70 Cel			0 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9116 mm	Not Qualified					NO	e0			4.9 mm
LT1237CSW#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	70 Cel			0 Cel	3	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified			5		NO	e3			17.9 mm		600 ns
AD232SQ	Analog Devices	LINE TRANSCEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	1	CMOS		EIA-232-C; V.28	10 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.0002 Amp	4.5 V	2.54 mm	125 Cel			-55 Cel	2	TIN LEAD	DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified	3.2 Amp	INVERTED	2		NO	e0				10 V	0 ns
ADM561JRS	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS	1000 ns	EIA-232; TIA-232	3 mA	SCHMITT TRIGGER	3.3 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers	.00004 Amp	2.97 V	.65 mm	70 Cel		TOTEM-POLE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e0		240	10.2 mm	10 V	2000 ns
LT1237CSW	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	70 Cel			0 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified			5		NO	e0			17.9 mm		600 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.