Analog Devices Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
LT1330CNW	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		3	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	3 V			IN-LINE					2.54 mm	70 Cel	5 V		0 Cel	3	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T28	1	4.318 mm	15.24 mm	Not Qualified			5	ONE RECEIVER ACTIVE IN SHUT DOWN	NO	e0	20	235			600 ns
LT1331CNW#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		3	BIPOLAR	1300 ns	EIA-232; EIA-562		SCHMITT TRIGGER	3.3 V			IN-LINE					2.54 mm	70 Cel	5 V		0 Cel	3	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T28		4.318 mm	15.24 mm	Not Qualified			5	CAN ALSO OPERATE WITH 5V SUPPLY	NO	e3					600 ns
AD8019AR-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	12 V	12/+-12	-12 V	SMALL OUTLINE	SOP8,.25	Line Driver or Receivers		4 V	1.27 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G8	1	2.59 mm	3.9 mm	Not Qualified					NO	e0		240	4.9 mm	10.8 V	0 ns
LT1281ACSW#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		2	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V			SMALL OUTLINE					1.27 mm	70 Cel			0 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified			1		NO	e3	30	260	10.3 mm		600 ns
AD8328ARQ	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1			GENERAL PURPOSE		DIFFERENTIAL	5 V			SMALL OUTLINE, SHRINK PITCH				4.75 V	.635 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G20	1	1.75 mm	3.9116 mm	Not Qualified					YES	e0		240	8.65 mm		0 ns
PMAD236AR	Analog Devices		INDUSTRIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS			10 mA		5 V	5		SMALL OUTLINE	SOP24,.4	Line Driver or Receivers			1.27 mm	85 Cel			-40 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G24				Not Qualified	1.6 Amp				NO	e0				10 V
ADM560JRS	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS	1000 ns	EIA-232; TIA-232	3 mA	SCHMITT TRIGGER	3.3 V	5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	Line Driver or Receivers	.00004 Amp	2.97 V	.65 mm	70 Cel		TOTEM-POLE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e0		240	10.2 mm	10 V	2000 ns
AD8327ARUZ	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1			GENERAL PURPOSE		DIFFERENTIAL	5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				4.75 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G20	1	1.1 mm	4.4 mm	Not Qualified					NO	e3		260	6.5 mm		0 ns
PMAD241AR	Analog Devices		INDUSTRIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS					5 V	5		SMALL OUTLINE	SOP28,.4	Line Driver or Receivers			1.27 mm	85 Cel			-40 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G28				Not Qualified	1.6 Amp				NO	e0				10 V
AD237AN	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		1	CMOS		EIA-232-C; V.28	10 mA	SCHMITT TRIGGER	5 V	5		IN-LINE	DIP24,.3	Line Driver or Receivers			2.54 mm	85 Cel			-40 Cel	5	TIN LEAD	DUAL	R-PDIP-T24		5.33 mm	7.62 mm	Not Qualified	1.6 Amp	INVERTED	3		NO	e0			30.45 mm	10 V	0 ns
LT1537CSW	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V			SMALL OUTLINE					1.27 mm	70 Cel		3-STATE	0 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified		INVERTED	5	EXTERNAL CHARGE PUMP	NO	e0			17.9 mm		600 ns
LT1342CG	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	3 V			SMALL OUTLINE, SHRINK PITCH					.65 mm	70 Cel		3-STATE	0 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	1.99 mm	5.29 mm	Not Qualified		INVERTED	5	5 RECEIVERS ACTIVE UNDER SHUTDOWN; EXTERNAL CHARGE PUMP	NO	e0			10.2 mm		3000 ns
LT1330CSW#TR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER				SMALL OUTLINE					1.27 mm	70 Cel			0 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified			5	IT ALSO WORKS AT 5 VOLTS; ONE RECEIVER ACTIVE IN SHUT DOWN	NO	e0			17.9 mm		600 ns
ADM5170APZ	Analog Devices	LINE DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1	CMOS	15000 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V	+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ	Line Driver or Receivers	.000001 Amp	9 V	1.27 mm	85 Cel		3-STATE	-40 Cel	8	MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e3		260	11.505 mm	9 V	0 ns
LT1341CNW	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		3	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V			IN-LINE					2.54 mm	70 Cel			0 Cel	3	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T28	1	4.318 mm	15.24 mm	Not Qualified			5	ONE RECEIVER ACTIVE IN SHUT DOWN	NO	e0	20	235			600 ns
AD236AQ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	1	CMOS		EIA-232-C; V.28	10 mA	SCHMITT TRIGGER	5 V	5		IN-LINE	DIP24,.3	Line Driver or Receivers		4.5 V	2.54 mm	85 Cel			-40 Cel	4	TIN LEAD	DUAL	R-GDIP-T24		5.08 mm	7.62 mm	Not Qualified	1.6 Amp	INVERTED	3		NO	e0				10 V	0 ns
AD8323ARU-REEL7	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1					DIFFERENTIAL	5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				4.75 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G28	1	1.1 mm	4.4 mm	Not Qualified					YES	e0		240	9.7 mm		0 ns
AD230AQ	Analog Devices	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO		5	CMOS		EIA-232-C; V.28		STANDARD	5 V	5		IN-LINE	DIP20,.3	Line Driver or Receivers			2.54 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-GDIP-T20		5.08 mm	7.62 mm	Not Qualified		INVERTED			NO	e0				10 V	0 ns
ADM5170AP-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1	CMOS	15 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V	+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ	Line Driver or Receivers	.000001 Amp	9 V	1.27 mm	85 Cel		3-STATE	-40 Cel	8	TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e0		225	11.505 mm	9 V	0 ns
LT6300CGN#PBF	Analog Devices	LINE DRIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL				SMALL OUTLINE, SHRINK PITCH				5 V	.635 mm	70 Cel			0 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9116 mm	Not Qualified					NO	e3	30	260	4.9 mm
LT1281AIN#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		1	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V			IN-LINE					2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	2	MATTE TIN	DUAL	R-PDIP-T16	1	3.937 mm	7.62 mm	Not Qualified		INVERTED	2	EXTERNAL CHARGE PUMP	NO	e3					600 ns
AD7306AN	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BICMOS	100 ns	EIA-232; EIA-422	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5		IN-LINE	DIP24,.3	Line Driver or Receivers		4.75 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	3	TIN LEAD	DUAL	R-PDIP-T24		5.33 mm	7.62 mm	Not Qualified	4 Amp	COMPLEMENTARY	2	CONFIGURABLE INTERFACE STANDARDS; EXTERNAL CHARGE PUMP	YES	e0			30.485 mm	10 V	200 ns
LT1237CSW#TR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V			SMALL OUTLINE					1.27 mm	70 Cel			0 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified			5		NO	e0			17.9 mm		600 ns
LT1281ACN#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		1	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V			IN-LINE					2.54 mm	70 Cel		TOTEM-POLE	0 Cel	2	MATTE TIN	DUAL	R-PDIP-T16	1	3.937 mm	7.62 mm	Not Qualified		INVERTED	2	EXTERNAL CHARGE PUMP	NO	e3	30	260			600 ns
LT3669HUFD-2#PBF	Analog Devices	LINE TRANSCEIVER	AUTOMOTIVE	NO LEAD	28	HVQCCN	RECTANGULAR	PLASTIC/EPOXY	YES	40 V	1	BIPOLAR	6000 ns	GENERAL PURPOSE	6 mA	SCHMITT TRIGGER	24 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC28,.16X.2,20			7.5 V	.5 mm	150 Cel		OPEN-COLLECTOR	-40 Cel	2	Matte Tin (Sn) - annealed	QUAD	R-PQCC-N28		.8 mm	4 mm				1		NO	e3			5 mm		6500 ns
LT1281ACSW#TR	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		2	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V			SMALL OUTLINE					1.27 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified			1		NO	e0			10.3 mm		600 ns
AD8328ARQZ	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1			GENERAL PURPOSE		DIFFERENTIAL	5 V			SMALL OUTLINE, SHRINK PITCH				4.75 V	.635 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G20	1	1.75 mm	3.9116 mm	Not Qualified					YES	e3		260	8.65 mm		0 ns
LT1280ACSW#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	18	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		2	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V			SMALL OUTLINE					1.27 mm	70 Cel			0 Cel	1	MATTE TIN	DUAL	R-PDSO-G18	1	2.65 mm	7.5 mm	Not Qualified			1		NO	e3	30	260	11.55 mm		600 ns
AD8324ACP	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	3.47 V	1			GENERAL PURPOSE		STANDARD	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				3.13 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N20	3	1 mm	4 mm	Not Qualified					YES	e0		240	4 mm		0 ns
LT1281ACSW	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	18	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		2	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V			SMALL OUTLINE					1.27 mm	70 Cel			0 Cel	2	TIN LEAD	DUAL	R-PDSO-G18	1	2.642 mm	7.493 mm	Not Qualified			2	EXTERNAL CHARGE PUMP	NO	e0			11.557 mm		600 ns
LT1342CNW	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		1	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	3 V			IN-LINE					2.54 mm	70 Cel			0 Cel	3	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T28	1	4.318 mm	15.24 mm	Not Qualified			5	ONE RECEIVER ACTIVE IN SHUT DOWN	NO	e0	20	235			3000 ns
LT1341CSW	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		3	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V			SMALL OUTLINE					1.27 mm	70 Cel			0 Cel	3	TIN LEAD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified			5	ONE RECEIVER ACTIVE IN SHUT DOWN	NO	e0			17.9 mm		600 ns
AD53509JSQ	Analog Devices	LINE DRIVER		GULL WING	52	HLQFP	SQUARE	PLASTIC/EPOXY	YES	11.33 V	1			GENERAL PURPOSE		DIFFERENTIAL	11 V	3.3,-6,11	-6 V	FLATPACK, HEAT SINK/SLUG, LOW PROFILE	HQFP52,.63SQ,40	Other Interface ICs		10.67 V	1 mm					1	TIN LEAD	QUAD	S-PQFP-G52	3	1.6 mm	14 mm	Not Qualified					NO	e0		240	14 mm		0 ns
AD8328ACP-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	VQCCN	SQUARE	UNSPECIFIED	YES	5.25 V	1			GENERAL PURPOSE		DIFFERENTIAL	5 V			CHIP CARRIER, VERY THIN PROFILE				4.75 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N20		1 mm	4 mm	Not Qualified					YES	e0			4 mm		0 ns
AD234AR	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS		EIA-232-C; V.28	10 mA	STANDARD	5 V	5		SMALL OUTLINE	SOP16,.4	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G16		2.65 mm	7.5 mm	Not Qualified		INVERTED			NO	e0			10.3 mm	10 V	0 ns
ADM561JRZ	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS	1000 ns	EIA-232; TIA-232	3 mA	SCHMITT TRIGGER	3.3 V	3.3		SMALL OUTLINE	SOP28,.4	Line Driver or Receivers		2.97 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e3	30	260	17.9 mm	10 V	2000 ns
AD8324JRQ-REEL7	Analog Devices	LINE DRIVER	OTHER	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.47 V	1			GENERAL PURPOSE		STANDARD	3.3 V			SMALL OUTLINE, SHRINK PITCH				3.13 V	.635 mm	70 Cel			-25 Cel	1	TIN LEAD	DUAL	R-PDSO-G20	1	1.7526 mm	3.9116 mm	Not Qualified					YES	e0		240	8.6614 mm		0 ns
AD53033JSTP	Analog Devices	LINE DRIVER		GULL WING	52	HLQFP	SQUARE	PLASTIC/EPOXY	YES	12.36 V	1	BIPOLAR	2.1 ns	GENERAL PURPOSE		STANDARD	12 V	12,-7	-7 V	FLATPACK, HEAT SINK/SLUG, LOW PROFILE	QFP52,.68SQ,40	Other Interface ICs		11.64 V	1 mm					1	TIN LEAD	QUAD	S-PQFP-G52	3	1.6 mm	14 mm	Not Qualified					YES	e0		240	14 mm		0 ns
LT1280AISW#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	18	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		2	BIPOLAR	1300 ns	EIA-232		SCHMITT TRIGGER	5 V			SMALL OUTLINE					1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G18	1	2.65 mm	7.5 mm	Not Qualified			1		NO	e3	30	260	11.55 mm		600 ns
AD8326ARPZ-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	28	HSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12.6 V	1			GENERAL PURPOSE		STANDARD	12 V			SMALL OUTLINE, HEAT SINK/SLUG				11.4 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G28	1	2.49 mm	7.5 mm	Not Qualified					YES	e3			17.935 mm		0 ns
PMAD231AR	Analog Devices		INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS						5,12		SMALL OUTLINE	SOP16,.4	Line Driver or Receivers			1.27 mm	85 Cel			-40 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G16				Not Qualified	3.2 Amp				NO	e0				10 V
AD8398AACPZ-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES		2			GENERAL PURPOSE		DIFFERENTIAL	6 V	+-6/12	-6 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Line Driver or Receivers			.65 mm	85 Cel			-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N16	3	.8 mm	4 mm	Not Qualified				IT ALSO NEED 12V SUPPLY	NO	e3		260	4 mm	17.6 V	0 ns
AD45048ARZ-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	12.6 V	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	6 V	+-6/+-12	-6 V	SMALL OUTLINE	SOP8,.25	Line Driver or Receivers		1.5 V	1.27 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified					NO	e3		260	4.9 mm	11.25 V	0 ns
LT6301IFE#TRPBF	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	12 V	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				5 V	.65 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified					YES	e3	30	260	9.7 mm
AD8322ARU-REEL7	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1			GENERAL PURPOSE		DIFFERENTIAL	5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				4.75 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G28		1.1 mm	4.4 mm	Not Qualified					YES	e0			9.7 mm
ADM561JRZ-REEL	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.63 V	1	CMOS	1000 ns	EIA-232; TIA-232	3 mA	SCHMITT TRIGGER	3.3 V	3.3		SMALL OUTLINE	SOP28,.4	Line Driver or Receivers		2.97 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	4	MATTE TIN	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5		NO	e3	30	260	17.9 mm	10 V	2000 ns
AD8328ACPZ-REEL7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	VQCCN	SQUARE	UNSPECIFIED	YES	5.25 V	1			GENERAL PURPOSE		DIFFERENTIAL	5 V			CHIP CARRIER, VERY THIN PROFILE				4.75 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N20	3	1 mm	4 mm	Not Qualified					YES	e3		260	4 mm		0 ns
AD8322ARUZ	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1			GENERAL PURPOSE		DIFFERENTIAL	5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				4.75 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G28	1	1.1 mm	4.4 mm	Not Qualified					YES	e3		260	9.7 mm

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.